3. production experiments(4)

3. production experiments(4)

• 1.
  Experiments Stephen Royle
• 2.
  Process I wrote outa script on a word document before recording so that I knew what to say and so that the recording went smooth and professional. I also added where I wanted certain sound effects and at these points I paused in the recording to make editing easier.
• 3.
  Process At first Icould not hear some of the sound effects properly so I used the soundboard to turn up the master sound for the second audio set, coded A2. I also had to turn down A1 a little bit on the master soundboard to fully amplify the sound effects along with the main sound. I kept the sound effects and the main sound in separate audio places so that I could make the sounds louder or quieter easier than if they were on the same audio set. Overall this went well and this helped a lot with my audio skills for the future.
• 4.
  Process I used someaudio effects such as a fade out at the end of some of the sound effects. I did this by going onto audio effects and then clicking crossfade and dragging and dropping exponential fade onto the sound effect I wanted to put it on. This worked well as it morphed the sound into my work a lot more. I will use this in the future as it is a very strong effect and works in many places.
• 5.
  Process I collected mysounds from the YouTube audio library. It had all of the sounds that I needed and helped a lot when I was looking for sounds. I stored them all together on my USB stick from the internet to make sure that I had them safe in case Premier pro couldn’t find my file or it got corrupted and the premier file could not open it. I had it backed up if this happened.
• 6.
  Reflection • What elementsof your experiments will you include in your final product? – I will use elements such as the different mixing of sounds. – I will also use different fade in and out effects as well. – I am also going to script my final piece like I did in my experiments to make sure my final piedce is clear and profffesional.