Access2007

A Quick Microsoft Access 2007 Tutorial
By Charles W. Neville, © Charles W. Neville, with modification by Leith Chan, Vicky Wong and Steven L

Verbatim copying and redistribution of this tutorial are permitted in any medium provided this
notice and the copyright notice are preserved.

This tutorial is intended for students who need a quick introduction to Microsoft Access, but it
will be useful to anyone needing such an introduction. To get the full benefit of this tutorial, you
will need a computer with 500 megahertz (MHz) processor or higher and running one of
Microsoft Windows XP with Service Pack (SP) 2, Windows Server 2003 with SP1, or later
operating system. You will also need at least 1.5 gigabyte (GB) hard disk space to have
Microsoft Access 2007 installed (a portion of this disk space will be freed after installation if the
original download package is removed from the hard drive).
Microsoft Access 2007 provides a library of prebuilt database solutions to get you started quickly

Introduction

Though Microsoft Access is NOT synonymous with database systems; there are more copies
of Microsoft Access in use than any other database system. It therefore behooves computer
science students to be at least superficially familiar with MS Access. This tutorial will guide you
through some of the basic point-and-click stuff, and will even show you how to issue complex
SQL (Structured Query Language) queries. You will open the Northwind Microsoft sample
database and query it in various ways. This is a HANDS-ON tutorial; it gives you step-by-step
directions for carrying out simple tasks in Access. As you read, you should have a copy of the
Northwind database open in Microsoft Access 2007, and you should carry out the tasks
yourself, exactly as directed.
First, a few words about what Microsoft Access 2007 is and isn't. People who don't really
understand what a relational database system is, and people who don't actually understand
what Microsoft Access 2007 is, will
IMSE1013: Database: A Quick Microsoft Access 2007 Tutorial Page 1

tell you that Microsoft Access is not a fully relational database system. In the database world,
not being fully relational is very bad. Don't worry! The people who tell you that are like those
who try to tell you that Linux is not a 32 bit operating system. Microsoft Access 2007, and its
predecessors Access 95, 97, 02 and 03, are excellent fully relational database systems.

But Microsoft Access 2007 does have a few shortcomings. The principle shortcoming is that it
is almost impossible to enforce reasonable security restrictions with Microsoft Access 2007. So
if you want a variety of users to interact with a database, you should move up to Microsoft's
SQL Server, an Oracle database above the level of Oracle Personal Edition, or the wonderful,
and FREE, MySQL. (And let us not forget to mention the higher levels of FileMaker Pro as
good possibilities.) As a certified Microsoft hater, I would naturally prefer that you move up to
Oracle, MySQL, or FileMaker Pro, but I have to be fair. Microsoft's database products are
extremely good, easy to develop for, readily accepted by the outside world, and always good
choices.
An Access Database Open and Ready for Use

This tutorial is divided into chapters. You probably should go through the chapters in
sequence, starting with chapter 1.

Chapters
1. GettingStarted.
2. Adding and Changing
Data. 3. Simple Queries.
4. Creating Append
Queries 5. Creating QBE
Queries. 6. Multi-table
QBE Queries. 7. SQL
Queries.


Chapter 1. Getting Started
Copying the Northwind Sample Database

The first thing you need to do is make a copy of the Northwind sample database to avoid
altering and perhaps permanently disabling it. You should use this copy instead of the original
database while you go through this tutorial. You can copy the Nothwind sample database from
P: IMSE1013Access Northwind.mdb to your U: drive.

Opening the Northwind Sample Database

Step 1. Open your copy of Northwind by double clicking it. Microsoft Access will start up with
a security warning. Click the “Options... ＂ button, check the “Enable this content ＂
checkbox and then press OK button.

Step 2. If all goes well, you will see the opening screen of the Northwind database. Press the
OK button to get the Northwind Traders splash screen out of the way and start working with the
actual Northwind database.
The opening screen of the Northwind database


Moving around the Northwind Database

Once the opening splash screen is out of the way, you can see the database window. It
consists of a number of tabs, each of which displays a different aspect of the database.
Typically, the Northwind database opens with the Forms tab selected. In Microsoft applications,
Forms are windows used to interact with the application. Later, after you have finished this
tutorial, you might want to satisfy your curiosity about forms. If so, try selecting the Main
Switchboard form, dragging it to the layout (or double clicking it). As is typical in Microsoft
applications, you can close a form by clicking the small x at the top right of the form on its title
bar. (Be careful not to click on the x at the top right of the Microsoft Access title bar, or you will
close Access completely.) If you want to find out how to build your own forms and develop
Microsoft Access applications, try find a book on Microsoft Access.
The forms tab of the Northwind database window

We are mainly interested in the relational database aspects of Microsoft Access, so let us open
the Tables tab and look at some of the tables in the Northwind database.

Step 1. Press the tab marked Tables under the list of Objects at the left of the database
window, and then clicks ONCE on Customers to select the Customers Table.


The tables tab of the Northwind database window with Customers selected

Step 2. Right-click the Customers Table and click Design View on the shortcut menu to view
the design (table definition) of the Customers Table. Notice the small key by CustomerID. As
you have probably already guessed, this means that CustomerID is a key field.


The design of the Customers Table

Move the small vertical scroll bar at the right side of the table description window up and down,
if necessary, so you can read the names and data types of all the fields in the Customers
Table.
Caution: Do not change any of the table field definitions, as you do not want to mess up the
database. (Changing table field definitions without knowing what you are doing is one of the
few really bad things you can do to a database. If you change the table field definitions, you will
destroy a large part of the data in the table.)

Step 3. After you have inspected the Customers Table design, click on the small x at the top
right of the Customers Table on its title bar to close the table definition panel and return to the
Tables tab. Again, be careful not to click on the x at the top right of the Microsoft Access title
bar, or you will close Access completely.

Viewing the Data in the Customers Table

Step 1. Be sure the Tables tab is visible in the database window. Open the Customers Table
by double- clicking on it. This will display the data in the table.


The Customers table opened

The Customers Table contains only 91 records, so it is easy to scroll through the opened table
and view all the records. Move the vertical scrollbar up and down so you can inspect the data
in some of the records. Move the horizontal scrollbar back and forth to view all the fields in a
given record. Then close the table by clicking on the small x at the top right of the table on its
title bar. Again, be careful not to close Access itself.
Getting Familiar with the Remaining Tables

View the definitions and data for each of the other tables in the database window. Note the
large number of datatypes supported by Access. These include text fields of various sizes,
memo fields which are text fields of unlimited size, number fields, autonumber fields, and even
image fields. To actually see the images in the Picture field in the Categories Table, you have
to double click them while the table is open. Those of you familiar with object technology will be
able to see that Microsoft Access 2007 is in part an object oriented database because access
methods (to view images for instance) are bundled with the data. However, Microsoft Access
2007 is not fully object oriented because (1) it does not support inheritance, and (2) you are not
able to specify the access methods for fields in a table.
What's Next?

The next thing to do is to study how to Add and Change Data


Chapter 2. Adding and Changing Data
Adding Data to the Customers Table

To add records to a table, all you have to do is type them in. Let's add a record for a new
customer, Restaurante Villa, to the Customers Table.

Step 1. Be sure the Customers Table is open in the database window with its data displayed.
Click on the button at the bottom of the Customers Table window to move to the blank record
at the end of the Customers table. The cursor should be positioned in the Customer ID field of
the record.
Adding a new record

Step 2. Enter RSTVA in the Customer ID field. Click on the next field, the Company Name field
and enter Restaurante Villa. Then repeat this process to add the following information to the
following fields of the Restaurante Villa record: Pancho Villa to Contact Name, Manager to
Contact Title, Avda. Azteca 123 to Address, Juarez to City, Mexico to Country, (5) 555 4781 to
Phone, and (5) 555 4782 to Fax. Click anywhere outside of the new record to save it. (There
will be no feedback that the new record has been saved.)
The completed Restaurante Villa record


Changing Data in the Customers Table

Suppose you have just learned that Pancho Villa is not the manager of Restaurante Villa,
rather he is the owner. To make the change, all you have to do is type it in.

Step 1. Be sure the Restaurante Villa record is visible in the Customers Table window. Click
anywhere on Manager in the Contact Title field to place the cursor there.

Ready to change the Contact Title field of the Restaurante Villa record

Step 2. Use the Delete or Backspace key to erase Manager, and then type Owner in its place
to make the change. Click anywhere outside the Contact Title field to save the change. (There
will be no feedback that the change has been saved.)

Changing the Restaurante Villa record


Deleting Data from the Customers Table

Sometimes you need to completely delete a record. Let's delete the Restaurante Villa record
so we can restore your copy of the Northwind sample database to its original state.

Step 1. Be sure the Restaurante Villa record is visible in the Customers Table window. Click
anywhere on the record to select it. This is VERY IMPORTANT, as not selecting the correct
record may result in the WRONG RECORD being deleted.

Ready to delete the Restuarante Villa record

Step 2. On the Home tab, in the Records group, click the down arrow next to Delete and click
Delete Record. Deleting the Restaurante Villa record


Step 3. Because deleting a record is an extreme change and an irreversible process, you will
be asked to confirm the deletion. Check carefully to be sure you are deleting the correct record.

Confirming the deletion of the Restaurante Villa record

Step 4. Click Yes on the confirmation box to finish deleting the record. Observe that the
Restaurante Villa record is no longer there.

After deleting the Restaurante Villa record

Finding Records in the Customers Table

To find a record in the Customers Table, On the Home tab, in the Find group, click Find . (Alternate

procedure: Press CTRL+F.) This figure shows the command:. Find works just about the way Find

works in your favorite word processor, so I won't present you with any screen shots. Just be
careful that the cursor is located in the column of the table containing the item you are
looking for, because the default is to search only down the current column. You should
practice using Find. Try moving to the first record in the table and then finding TOMSP in the
Customer ID column. Then go back to the top or the table and repeat this for Karin Josephs
in the Contact Name column.
The last thing you should do is close the Customer's Table by clicking the small x at the top
right of the table on its title bar. Be careful not to click on the x at the top right of the Microsoft
Access title bar, or you will close Access completely.

What's Next?

The next thing to do is to study Simple Queries


Chapter 3. Simple Queries
What Are Queries?

It is easier to give examples of queries than to give a formal definition. So consider, for
example, the Products table in the Northwind sample database. The Products table lists both
current and discontinued products. You can tell which is which by looking at the Discontinued
field of the Products table. Suppose you want a list of all current products. It is inconvenient to
print out all 77 product records in the table and then run down the list by hand and check off
those which are not discontinued. It would be far easier to let the computer do the work by
querying the database and getting a machine prepared list of current products. This is where
queries come in.
Microsoft Access 2007 allows you to create queries and store them for reuse. The stored
queries are listed in the Queries tab of the database window. As it turns out, the designers of
the Northwind database have already created and stored the very query we are interested in to
list all current products. The name of the query is Current Product List. Let us examine and
then run it.
Examining the Current Product List Query

Step 1. Be sure the database window is visible. Click on the Queries tab of the database
window to make the list of stored queries visible. Click ONCE on the Current Product List query
to select it.
The queries tab of the Northwind database window with Current Product List selected

Step 2. Right-click the Current Product List query and click Design View on the shortcut menu
to view the design (query definition) of the Current Product List query.


The design of the Current Product List query

The design view of the query, which you are looking at now, presents the design of the query
in a graphical format. Move the vertical scroll bars in the Product List box up and down to see
what fields are available in the Product List table. Notice the checks at the bottom of the
ProductID and ProductName columns of the design window. These indicate that the ProductID
and ProductName fields will be shown when the query is run. Notice the lack of a check at the
bottom of the Discontinued column. This indicates that the Discontinued field will not be shown
when the query is run. Finally, notice the No in the Criteria row at the very bottom of the
Discontinued column. This indicates that that only those records with No in their Discontinued
fields will be selected when the query is run. In this way, the query will list the product IDs and
names of all current products, but will not list any discontinued products.
Note. You may have wondered, where did the Product List table come from? After all, the
correct name of the table in the database is Products. The answer is that Product List is an
alias for the Products table. This introduces an unnecessary complication into the query, and I
suppose the designers of the Northwind database used this alias just to prove they could.

Another note. The graphical format used by design view has another name, Query By Example
or QBE, so design view could equally well be called QBE View. Of course, Microsoft doesn't
call it that, perhaps because QBE was invented by IBM. QBE was originally a simple text
based method for entering queries. The second generation of QBE became known as
graphical QBE because it used a tabular graphical interface similar to the one used by
Microsoft and many other database vendors today. The graphical interface for second
generation QBE was much simpler than Microsoft Access 2007's because second generation
QBE, despite its name of graphical QBE, ran on the text based terminals used by the
mainframes of the time.

Running the Current Product List Query

Step 1. Be sure the Current Product List query is open in design view. On the Design tab, in the
Results group, click Run to run the query.(Alternate procedure: double-click the Current
Product List query in the Navigation Pane, or click it and then press ENTER.)

Running the Current Product List query

If all goes well, the Current Product List query will run rather quickly, and the following table of
results will appear,

The result of running the Current Product List query

This table of results is referred to as the Datasheet View of the query.


Move the vertical scroll bars at the right of the table up and down to view all 69 records in the
table of results. This is a lot easier than examining all 77 records in the original table by hand,
isn't it?. And with real data, where there may be thousands or even millions of records,
machine run queries are essential.
The SQL View of the Current Product List Query

A query is really an SQL (Structured Query Language) statement or statements. Microsoft
Access 2007 makes it possible for you to examine and edit the actual SQL statements making
up a query by switching to SQL View. Let us switch to SQL View and look at the SQL
statements making up the CurrentProductList query.
Step 1. Be sure the Current Product List query is open in design view. On the Design tab, in the
Results group, click View Menu and then click SQL View to look at the query in SQL view.
(Alternate procedure: Be sure the Current Product List query is open in Datasheet view. On the
Home tab, in the Views group, click View Menu and then click SQL View to look at the query in
SQL view.)
Changing to the SQL View of the Current Product List query

Or,


If all goes well, you will see the following window appear, The SQL
View of the Current Product List query

This window is actually a simple text editor. You can edit the SQL, enter more SQL, and cut,
copy and paste text. Thus, if you already have some SQL queries prepared in a text file, say
one you wrote in Notepad or UltraEdit 32, you can create an Access 2007 query by clicking
Query Design in the Other group of the Create tab to start a new query, switching to SQL
view, deleting the small amount of text in the SQL view window, and then pasting in the text of
your prepared SQL query. The really nice thing is that if you switch back to design view, your
query will appear there nicely in graphical QBE. Of course, you can run your new query as we
just did. You will get to do these things when you study SQL Queries.
Note. The SQL produced by Access 2007 when you create a QBE query in design view is
often unnecessarily complicated. In the example above, there are lots of unnecessary
parentheses. This is typical of machine generated code, and Access 2007 should not be
criticized on this account.
The last thing you should do is close the Current Product List query by clicking the small x at
the top right of the SQL View window on its title bar. Be careful not to click on the x at the top
right of the Microsoft Access title bar, or you will close Access completely.

What's Next?

The next thing to do is to study how to create an append query. After that, you will be
prepared to study how to create QBE Queries.


Chapter 4. Creating Append Queries
What are append queries?

An append query adds a set of records (rows) from one or more source tables (or queries) to
one or more destination tables. Typically, the source and destination tables reside in the same
database, but they don't have to. For example, suppose that you acquire some new customers
and a database that contains a table of information about those customers. To avoid entering
that new data manually, you can append it to the appropriate table in your database. You can
also use append queries to: (1) Append fields that are based on criteria. For example, you
might want to append only the names and addresses of customers who have outstanding
orders. (2) Append records when some of the fields in one table don't exist in the other table.
For example, suppose that your Customers table has 11 fields, and the fields in the Clients
table in another database match 9 of your 11 fields. You can use an append query to add only
the data in the matching fields and ignore the others.
Note. You cannot use append queries to change the data in individual fields in existing
records. You can only use append queries to add rows of data.

Create a select query?

Step 1. Be sure the database window is visible. On the Create tab, in the Other group, click
Query Design. Starting a new query

Step 2. This displays a new blank query in design view, and also presents you with the Show
Table dialog box so you can choose which tables will be involved in the query. Select the
Shippers table and press the Add button.


The new blank query in design view with the Show Table dialog box

Step 3. Double-click the fields that you want to append. The selected fields appear in the
Field row in the design grid (the lower section of the query designer).

The new blank query in design view with selected fields


Testing the new Query

You should always test a new query by running it.

On the Design tab, in the Results group, click Run to run
the query. Running
the new query

If all goes well, the new query will run rather quickly, and the following table of results
will appear, The result of running the new query


Saving the New Query

You need to save your new query for future use. To save the query, click the Microsoft Office Button
,
and then click Save. Save the query as AppendQuery.

Convert the select query to an append query

Step 1. Right-click the AppendQuery and then click Design View on the
shortcut menu. The design of the
AppendQuery

Step 2. On the Design tab, in the Query Type group, click Append. The Append dialog
box appears. The AppendQuery with the Append dialog
box


Step 3. In the Append dialog box, click Current Database (if it isn't already selected),
and then select Suppliers as the destination table from the Table Name combo box.

Appending records to a table in the same database

Step 4. Microsoft Access 2007 now adds all the fields in the destination table to the
Append to row in the design grid.

Appending records to a table in the same database


Testing the New Query


Step 1. On the Design tab, in the Results group, click Run to run
the query. Running the
new query

Step 2. Click Yes on the confirmation box to finish appending the
record The table of results for the
AppendQuery

What's Next?

The next thing to do is to study how to create your own QBE Queries. After that, you will
be prepared to study how to create SQL Queries.


Chapter 5. Creating QBE Queries
Creating a New Query

The Current Product List query only displayed the Product ID and Product Name fields of the
products which have not been discontinued. Let us create a new query which will also display
the Supplier and Category fields. The fastest way to do this would be to open the Current
Product List query in design view, and then alter the query. But instead, for practice, we shall
create a new query from scratch.
Step 1. Be sure the database window is visible. On the Create tab, in the Other group, click
Query Design. Starting a new query

Step 2. This displays a new blank query in design view, and also presents you with the Show
Table dialog box so you can choose which tables will be involved in the query. Select the
Products table and press the Add button.

The new blank query in design view with the Show Table dialog box

Step 3. As the Products table will be the only table involved in the query for the time being,
press the Close button on the Show Table dialog box. You are now ready to begin the real
design work.

Ready to begin the real design work on the new query

Step 4. Be sure the cursor is in the first box of the Field row and press thein the box to display the
button
field choices for the Products table. Select ProductID.

Selecting the ProductID field for display

Step 5. Click on the second box of the Field row and press the button again to display the
field choices for the Products table. Select ProductName. Continue in this fashion, with
CategoryID in the third box and Discontinued in the fourth box.


The completed query

Testing the New Query


Step 1. On the Design tab, in the Results group, click Run to run
the query. Running the
new query

If all goes well, the new query will run rather quickly, and the following table of results will appear,


The result of running the new query

You should inspect all the records in the table of results. You will immediately notice a problem.
There are 77 records instead of the expected 69, and some of the records have their
Discontinued fields checked. We forgot to specify that the value of the Discontinued field
should be No. We have to correct this error. This is why you should always test your queries.

We also forgot to uncheck the checkbox in the Discontinued field column. But this was
fortunate because it helped us diagnose the problems with our query.

Correcting the New Query

Step 1. Right-Click on its title bar and then click on Design View to change back to
design view. Changing back to design view

Step 2. Enter No in the Criteria row of the fourth column.

The partially corrected query

Step 3. Run the partially corrected query to test it. Testing the
partially corrected query by running it

Inspect all the records in the table of results. Observe that there are the expected number of
records, 69, and that none of the records have their Discontinued fields checked. Thus, the
query appears to be correct, except for the display of the Discontinued field.

Step 4. Return to design view. Click on the check box in the Discontinued column to uncheck
it. This completes the corrections to the query.


The fully corrected query

Step 5. Test the fully corrected query one more time by running it.
Testing the fully corrected query by
running it

Once more, carefully inspect the table of results. Observe that the query appears to be correct.

Saving the Fully Corrected Query

You need to save your new query for future use. To save the query, click the Microsoft Office
Button, and then click Save. Save the query as CurrentProducts so you don't overwrite the
Current Product List query which comes as part of your copy of the Northwind sample
database. Save works just about the way Save works in your favorite word processor, so I
won't present you with any screen shots. The only difference is that you save the query inside
your copy of the Northwind database, so you don't get the usual Windows File Save dialog
box. Instead, you just get a dialog box where you type in the name under which to save the
query.
After you have saved the query, close it by clicking on the small x at the top right of the table of
results on its title bar. (Be careful not to click on the x at the top right of the Microsoft Access
title bar, or you will close Access completely.) Then inspect the Query tab and verify that your
new query, CurrentProducts, is listed there. You can reopen and run the query any time you
want by double clicking its name, CurrentProducts.
What's Next?

The next thing to do is to study Multi-table QBE Queries

Chapter 6. Multi-table QBE Queries
Converting the CurrentProducts Query to a Multi-table Query

The CurrentProducts query that you developed and saved in the last chapter only displays the
ProductID, ProductName, and CategoryID fields of the products which have not been
discontinued. These fields, and the Discontinued field, are all part of the Products table, so you
only needed that one table in the design of the query.

But suppose you wanted to change the query so it would also present the name of the supplier
of each product, and the suppliers telephone number. The supplier name is available in the
Products table in the SupplierID field. (Strictly speaking, this isn't true; instead the numerical
SupplierID is available. But the designers of the Northwind sample database made it appear as
though the supplier name is available.) However, the supplier's telephone number is NOT
available in the Products table, so we have to use a second table, the Suppliers table, where it
is available.
Let us convert the CurrentProducts query to a multi-table query.

Step 1. Be sure the Queries tab is selected and visible in the database window. Open the
CurrentProducts query in design view by right-clicking it and then clicking on the Design
View button.
Opening the CurrentProducts query in Design View

If all goes well, you will see the familiar CurrentProducts query you designed, tested, and
saved in the last chapter.


The Design View of the CurrentProducts query

Step 2. On the Design tab, in the Query Setup group, click Show Table to display the Show
Table dialog box. Displaying the Show Table dialog box

Step 3. When the Show Table dialog box appears, select the Suppliers table and press the Add button.


Adding the Suppliers Table

Step 4. Close the Show Table dialog box by pressing the Close button. If all goes well, you
will see both the Products table and the Suppliers table in the design view window.

The Products and the Suppliers tables both displayed

The line running from Products to Suppliers denotes a many-one relationship between the two
tables. Microsoft Access 2007 incorporates relationships as objects separate from tables, so
you can design directly from Entity-Relationship diagrams. Access also uses relationships to
automatically generate joins between tables. In this chapter of the tutorial, you can safely
ignore relationships.
Step 5. Be sure the cursor is in the box in the Table row immediately to the right of the
Discontinued column. Press thebutton in the box to display the table choices. Select Suppliers.


Selecting the Suppliers table

Step 6. Click on the box of the Field row just above where you selected the Suppliers table, so
you can choose the proper field from the Suppliers table.

Ready to select a field from the Suppliers table

Step 7. Press thebutton again to display the field choices for the Suppliers table. Select SupplierID.


Selecting the SupplierID field

Step 8. Enter Products.SupplierID in the box in the Criteria row and the Suppliers column. This
will guarantee that Suppliers.SupplierID = Products.SupplierID, so that you will match up the
correct product with the correct supplier.

Entering Products.SupplierID in the criterion box

Note. Strictly speaking, this is not necessary because of the Microsoft Access many-one
relationship between Products and Suppliers. But we have included it for clarity. (Remember,
we are ignoring Access relationships in this chapter.)

Step 9. Click the check box in the Suppliers column to uncheck it.


The query with the Suppliers column checkbox unchecked

Step 10. Repeat steps 5 through 7 in the blank column immediately to the right of the Suppliers
column you just completed. Select the Suppliers table and the CompanyName field. Be sure
you leave the check box checked, and be sure you leave the box in the Criteria row blank.

Step 11. Repeat this in the next blank column immediately to the right of the Suppliers column
you just completed. Select the Suppliers table and the Phone field. This completes the multi-
table query.


The completed query

Testing the Multi-table Query

Remember, you should always test a new query by
running it. Step 1. Run the completed query.

The table of results for the multi-table query

Carefully examine the table of results. It appears to be correct, so the completed query appears to be co

Saving the Completed Multi-table Query

Save the completed multi-column query for future use as CurrentProductsAndSuppliers. (The
period is there for grammatical reasons and is not part of the name.) Be sure you use Save As
rather than Save from the
Microsoft Office Button , and then click, because Save doesn't allow you rename the query.

Displaying the Multi-table Query in SQL View

Let us look at the SQL behind the query by displaying the query in SQL View.


Step 1. On the Home tab, in the Views group, click View Menu and then click SQL View to
look at the query in SQL view.

Displaying the query in SQL view

If all goes well, the SQL View display of the query will look like
The SQL view of the multi-table
query

Note. The INNER JOIN appears in the SQL because of the Access many-one relationship
between the Products table and the Suppliers table. The query will work correctly without the
INNER JOIN, as we shall see in the next chapter.

What's Next?

The next thing to do is to study SQL Queries


Chapter 7. SQL Queries
Overview

You need to become familiar with SQL (Structured Query Language) because you will need it if
you ever develop a Microsoft Access application and have to issue queries through code. You
also need SQL to query other database systems, such as Oracle and MySQL. Finally, once
you know SQL, it is often easier to write a query directly in SQL than to design it using
Access's QBE interface.
One of the best ways to learn SQL is to build QBE queries and then inspect and alter the query
in SQL View. You are going to do just that with the CurrentProductsAndSuppliers query that
you developed and saved in the last chapter. In detail, you are going to copy the SQL from the
CurrentProductsAndSuppliers query, start a new blank query, paste the SQL into the new
query, and save the new query under a new name. Then, you are going to change the SQL
behind the new query.
Copying the SQL from the CurrentProductsAndSuppliers Query

Step 1. Be sure the CurrentProductsAndSuppliers query is visible in SQL view. By now, you
know how to open the query and change to SQL view if it is not.

The SQL view of the CurrentProductsAndSuppliers query

Step 2. Select the SQL text and copy it to the clipboard using the
Edit menu. Copying the SQL text
to the clipboard


Step 3. Close the query by clicking on the small x at the top right of the SQL View window on
its title bar. (Be careful not to close Microsoft Access by clicking on the x at the top right of the
Microsoft Access title bar.) If a dialog box comes up asking you if you want to save the
changes to the query, answer No.
Starting the New Query

Step 1. Be sure the Queries tab is visible. On the Create tab, in the Other group, click
Query Design. Starting the new query

Step 2. Because you want to start a new blank query, press Close as soon as the Show
Table dialog box appears.

Closing the Show Table dialog box

You should see a new blank query in design view, with no tables.


The new blank query in design view

Step 3. Change to SQL view. By now, you know how. The
new blank query in SQL view

Pasting SQL into the New Query

Step 1. Paste the SQL you have previously copied to the clipboard into the new query's SQL
view window by selecting the text in the window if necessary, clicking Paste on the Paste
menu in clipboard group of the Home tab.


Pasting the SQL into the SQL view window

The result will be that you have the SQL from the CurrentProductsAndSuppliers query pasted
into the SQL view window of your new query

The SQL pasted into the new query SQL view window

Simplifying the New Query SQL

The SQL view window is a complete, though simple, text editor. You are going to simplify the
SQL you have just pasted in by editing it.

Step 1. The parentheses in the SQL are not needed, so delete them.

Step 2. The INNER JOIN statement is not needed either, so remove it too. (Remove everything
after the FROM on the INNER JOIN line.) You do need to say what tables you are
using though, so insert PRODUCTS, SUPPLIERS after the FROM. The simplified SQL in the
SQL view window of the new query should look like


The simplified SQL

Testing the Simplified New Query

Remember, you should always test a new query by
running it. Step 1. Run the completed query.

The table of results for the simplified new query

Note that the table of results is the same as that for the CurrentProductsAndSuppliers query.
Thus the new query appears to be equivalent to the CurrentProductsAndSuppliers query, even
though the SQL has been greatly simplified by replacing the INNER JOIN by a WHERE clause.
Most people who write SQL use WHERE clauses instead of JOINs because WHERE clauses
are so much simpler.
Saving the Simplified New Query

Save the simplified new query for future use as SQLQuery. (The period is there for
grammatical reasons and is not part of the name.) Yes, the name SQLQuery is a dumb one,
but there are only so many variations on the more descriptive CurrentProductsAndSuppliers
name.
Displaying the SQL Query in Design View

Once a query has been built with SQL, it has a perfectly reasonable design view (QBE
view). Let us verify this by displaying the SQL query in design view.

Step 1. Change to the Design View of the query. By now, you
know how. The SQL query in
design view

Note that the design view of the SQL query is nearly the same as the design view of
the CurrentProductsAndSuppliers query. Note the two tables displayed in the tables panel of
the design view window. Only the line denoting the Access many-one relationship is missing.
Note how similar the tabular QBE panel of the SQL query is to the QBE panel of the
CurrentProductsAndSuppliers query. Only the order of some of the columns is different.

You can switch back and forth between designing a query in SQL View and Design View at
will. You should mix and match, and use whatever is simplest at the time.

What's Next?

Congratulations! You have finished A Quick Microsoft Access 2007 Tutorial. If you want to
review, you should go back to the introduction to select the chapters you want to revisit.

If, for any reason, you want to delete any of the queries you have saved, you select the query
to be deleted and use Delete from the Edit menu.

There is much more to learn about Microsoft Access, especially about Forms. In Microsoft
applications, Forms are windows used to interact with the application. Most Microsoft Access
databases use Forms to make it easy for people to interact with the database.


If want to satisfy your curiosity about forms, try selecting the Forms tab and then open the Main
Switchboard form. Then use it to open various other forms in the Northwind sample database.
By now, you know enough to switch back and forth between form view and design view, so you
can learn something about how forms are constructed. Each form has an associated code
module, written in a form of Visual Basic called VBA (Visual Basic for Applications). To view
the code, switch to code view.
To close Microsoft Access 2007, Click the Microsoft Office Button, and then click Close Database.
(Alternate procedure: Click on the small x at the very top right of the Microsoft Access window.) But I'm s
you already know that.


Access2007

More Related Content

What's hot (19)

Similar to Access2007 (20)

Recently uploaded (20)

Access2007