Download to read offline
Uploaded byFAIRMATE Construction Chemicals
Anchorgrout
Anchorgrout is a thixotropic, polyester grout that provides high early strength and durability. It is corrosion and weather resistant, allowing it to be used in damp conditions. Anchorgrout sets and cures rapidly, gaining 60 MPa of compressive strength within 24 hours. It can be used to anchor bolts, dowels, and rebar in vertical, horizontal, or overhead applications where the hole is 4-25 mm larger than the bar.
More Related Content
More from FAIRMATE Construction Chemicals
Anchorgrout
- 1.
- 2. Benefits • Rapid strengthgain • Vibration resistant • Corrosion resistant • High early strength • Extremely durable • Weather resistant • Can be used in damp conditions • Fast setting and self curing.
- 3. Product A high strength,fast setting, fast curing grout of thixotropic consistency. ANCHORGROUT complies to BS 6319 Part-2,3 : 1985, BS 6319 Part-3 : 1990, BS 2782 Part-2 and BS 6319 Part-2 : 1983.
- 4. Uses • ANCHORGROUT canbe used for high strength corrosion resistant, anchoring of bolts and a permanent installation of reinforcement doweling and starter bars, foundation bolts, base plates, hand rails, safety fences, wall tiles, railway tracks, tie back anchors and grout for tower cranes. • Due to its thixotropic nature, ANCHORGROUT can be used in vertical, horizontal and overhead situations where the hole diameter exceeds the bar diameter by not less than 4 mm and not more than 25 mm.
- 5. Properties • Compressive Strength: 24 hours - 60 N/mm² Ultimate - 85 N/mm² • Gel time(Temp in ºC) Gel time(min) 20 40 30 30 40 15 • Density - 1.66 gm/cm³ (Typical axial pull out strength is 48 N/mm² in concrete using mild studding in holes drilled by rotary percussive equipment.) • Chemical resistance : The cured ANCHORGROUT is resistant to salt water, petrol, oil, grease and most acids, alkalis and solvents.
- 6. Packing ANCHORGROUT is suppliedin 1 Kg.
- 7. Packing ANCHORGROUT is suppliedin 1 Kg.