Ap 6511 ss_0610

Ap 6511 ss_0610

• 1.
  SPECIFICATION Sheet AP 6511 802.11n Wall Plate Access Point Powerful Wi-Fi for hotels, dormitories, hospitals and other multiple dwelling units that is fast and easy to deploy and manage Conventional access points (AP) can be challenging to deploy in the hallways of multiple dwelling units and require careful planning, drilling holes, pulling cable and installing ceiling brackets. In addition, high attenuation factors obstruct hallway APs including fire walls, mirrors, plumbing, and bathroom tile. The AP 6511 can be installed in the guest room in minutes, not hours, by standard service personnel using existing CAT5/6 cabling in the walls. The product’s sleek “hide in sight” design and small size matches the décor of any room. The universal mounting bracket can be installed on any wall surface or a structured wiring telecom box in minutes. Features/ Benefits Operation Flexibility be managed by the RFS series of controllers for very high The native SMART RF feature continually tunes power scalability (thousands of APs), simplified management, Powerful and channels to ensure top performance without and seamless wireless networks, including the Motorola 802.1 1a/b/g/n, 2x2 MIMO, 26dBm operator intervention. In addition, failover is seamless indoor and outdoor access points. and automatic, as user sessions will move to functioning access points that adjust their power to compensate Each radio in an AP 6511 can be repurposed as a sensor Fast for the loss of a neighboring access point. The 802.11n for AirDefense connectivity troubleshooting and spectrum Snap-on install in minutes MIMO technology along with Motorola’s optimized radio analysis in realtime, so the level-1 technician in the design covers six to ten rooms from any CAT5/6 wiring network operations center can immediately respond location. The AP 6511 supports all current 802.11a/b/g/n to user issues and provide highly useful, real-time Easy Self optimizing devices with role based access control, 802.1x on wireless troubleshooting without the expense of placing separate, virtual controller and wired ports, fast roaming, WMM QoS, intrusion fixed sensors. prevention, and other enterprise WLAN services. Sleek Design Modular Flexibility Low-profile, modular de- The AP 6511 features a snap-in port for any keystone style sign enables a guest room wireless LAN without connector (e.g. RJ11 or TV coax), so multiple services can disrupting operations. be supported on a single integrated AP 6511. Because guest rooms often require additional Ethernet ports for voice service, minibar monitoring or even guest wireline, Multiple Dwelling Unit a snap-on three-port Ethernet module is available to easily (MDU) Design Unique design and expand the number of available ports. The rapid installation deployment provides is predictable and repeatable across multiple properties. better coverage in Rapid and convenient installation provides predictable MDUs such performance to dramatically lower deployment costs. as hotels. Centrally manage the network from a cluster manager, Architecture Flexibility RF controller, or The AP 6511 includes self optimizing intelligent controller AirDefense Services AP code, so any single AP 6511 can serve as a master Platform for up-to 25 AP 6511 access points. Small properties and facilities will have all the benefits of a centralized RF controller - automatic adoption and centralized Hallway Installed AP Guest Room Installed AP Cluster Manager Rapid Deployment Manage a network of up configuartion - without the cost of a dedicated switch. And Extensive Planning Disruptive Uses Existing CAT5/6 Cabling to 25 AP 6511s from the because the operating system is Motorola’s Wi-NG , it can Installation Expensive cable pull native controller code Integrated Controller integrated into the APs. Automatic cluster manager election, or administrator selection.
• 2.
  SPEC IFICATION SHEET AP 6511 Wall Plate AP Available Interfaces WLAN and Networking Wireless Interface: Single radio; 802.11a/b/g/n; 2.4Ghz or 5.2Ghz BSS: 8 BSSIDs, 16 SSIDs LAN Ethernet port: IEEE 802.3 10/100Mb auto-sensing via 8-pin Virtual AP: Beacon en/dis, client isolation, SSID, auth, header enc, bitrate, VID Uplink LAN Ethernet: IEEE 802.3 10/100Mb auto-sensing VLANs: 4000 VLANs; VIDs 1 - 4095 Snap-in port: Supports any Keystone or QuickPort® style connector Security AP Mgmt: Encrypted management protocol Wireless Specifications WLAN: WEP static, WEP Dynamic (802.1x) Medium: DSSS, OFDM, MIMO WPA/TKIP Personal and Enterprise Standards: 802.11a, 802.11b, 802.11g, 802.11n WPA2/TKIP/AES Personal and Enterprise, Data Rates: 802.11b: 1, 2, 5.5, 11Mbps all EAP types 802.11g: 6,9,12,18,24,36,48, 54Mbps 802.11a: 6,9,12,18,24,36,48, 54Mbps Power 802.11n: MCS 0-15 up to 300Mbps AP+1 LAN port ~6.5W typical, AP+4 LAN ports ~9W Operating Channels: 2.4GHz: Chan 1-13 (2412-2472 MHz) 5.2GHz: All channels from 5150 MHz 802.3af compliant uplink LAN port or 48V external power supply to 5850 MHz Actual operating frequencies depend on national Physical regulatory limits 5” x 2.95” x 1” (12.8cm x 7.5cm x 25.4cm). 12oz (0.34Kg) Transmit Power: 6dBm to 20dBm, in 1dB increments; settings Actual Tx power dependant on national Two single color status LEDs; power, error, packets, operating frequency regulatory limits Receiver Sensitivity: 802.11b, 1Mb, -93dBm; 802.11g, 54Mb, -78dBm Environmental 2.4Ghz: 802.11n, MCS15 40Mhz, -69dBm 0 - 40 degrees Celsius, 5% to 90% NC 802.11a, 54Mb, -79Bm 5.2GHz: 802.11n, MCS15 40Mhz, -69dBm Mounting Antenna Configuration: Two internal omni-directional, 3.5dBi peak 1x2 or 2x2 MIMO operation Universal mounting bracket for worldwide telecom plates; mounting op- Note: Transmit power and receiver sensitivity are based on preliminary tions include engineering tests. Specifications are subject to change. over a telecom wall plate or flush surface mount Ordering Information Compliance AP-6511-60010-US Single radio 802.11a/b/g/n WallPlate AP Low . FCC 15.247 15.407 / EN300 328, EN 301 893 , profile. One Ethernet PD uplink port, one FE LAN UL EU EN 60950-1 2nd Ed., ANZ C-Tick port included. Optional Ethernet Module. Cluster Manager included. US-only version supports FCC Part 15 Subpart B, EN 55022: 2006 + A1: 2007 , ICES – 003 (Class B) FCC channel set. EN 55024: 1998 + A1: 2001 + A2: 2003 AP-6511-60010-WR Single radio 802.11a/b/g/n WallPlate AP Low . EU RoHS Directive 2002/95/EC profile. One Ethernet PD uplink port, one FE CE, IC, FCC, TELEC LAN port included. Optional Ethernet Module. Cluster Manager included. WR version supports individual country channel sets as required. KT-6511-0000D-WR Three port Fast Ethernet Module for AP-6511 motorola.com Part number SS-AP6511 Printed in USA 06/10. MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service namesare the property of their respective owners. QuickPort is a registered trademark of Leviton Corporation. © 2010 Motorola, Inc. All rights reserved. For system, product or service availability and specific information within your country, please contact your local Motorola office or Business Partner. Specifications are subject to change without notice.