Ap300 spec sheet

Ap300 spec sheet

• 1.
  SPECIFICATION Sheet AP300 Access Port Plug-n-play 802.11a/b/g Access Ports: Securely mobilizing the Wireless Enterprise FEATURES More functionality for a fraction at a fraction of the cost required to deliver the same of the cost of access points functionality in a first generation access point-based Mobility Supports Mobility at Access ports are a key component of Motorola’s network. Each AP300 supports four BSSIDs (Basic Layer 2 and Layer 3, award winning wireless switch system, the Service Set Identifiers) and 16 ESSIDs (Extended working in conjunction wireless LAN architecture that does more, yet Service Set Identifiers) per radio, enabling granular with Motorola’s enterprise wireless LAN switches costs less. Working in conjunction with Motorola’s segmentation of the wireless LAN into multiple wireless switches, the AP300 Access Port (AP) broadcast domains to meet specific enterprise needs. Security delivers robust and feature rich IEEE 802.11a/b/g Typical access points support only one BSSID, utilizing This unique dual-function connectivity. It can also be used as a sensor in ESSIDs (instead of BSSIDs) to create wireless VLANs. device can execute and enforce the IDS/IPS security conjunction with Motorola’s Wireless Intrusion policies configured in the Protection System (IPS). The AP300 can be adopted Dual-radio 802.11a and 802.11g design Motorola wireless switch, as either a Layer 2 or Layer 3 AP, supporting Layer Simultaneous service to 802.11a, 802.11b and and can also be utilized as a 24x7 dedicated sensor with 3 Mobility — substantially reducing the cost of 802.11g mobile devices provides high-bandwidth Wireless IPS from Air Defense deploying, implementing and managing a wireless wireless connectivity at speeds of up to 54 Mbps LAN while significantly increasing features, in both the 2.4 GHz and 5.2 GHz ISM bands. Load balancing, pre-emptive roaming functionality and the security of the wireless and rate scaling LAN infrastructure. Thin AP design Increases reliability and The AP300 requires no configuration or manual resilience of the wireless Virtual AP enables true Wireless VLANs for firmware maintenance. The Motorola wireless network to support mission critical applications better device and network performance switch discovers access ports on the network With Virtual AP, each access port can support four and automatically downloads all configuration 802.1x supplicant separate wireless broadcast domains — functionality parameters and firmware, greatly reducing installation, Allows authentication to a RADIUS server to enable that would otherwise require the installation of four maintenance and troubleshooting costs for Layer 2 an 802.1x-protected first-generation access points. These true wireless and Layer 3 deployments. Ethernet port VLANs enable separation of mobile end-users, ensuring that broadcast traffic reaches only those For more information, visit us on the Web recipients for whom it is intended. Overall network at www.motorola.com/ap300 or access traffic is reduced, network and device performance our global contact directory at is improved, and device battery life is increased — www.motorola.com/enterprisemobility/contactus
• 2.
  SPECIFICATION Sheet AP300 ACCESS PORT Plug-n-play 802.11a/b/g Access Ports: Securely mobilizing the Wireless Enterprise 802.11i Support for IEEE standards- based security protocols for AP300 Specifications strong Encryption (AES, TKIP), Physical Characteristics AP300 (internal antenna) AP300 (external antenna) Authentication and Key Management (802.1x-EAP) Dimensions: 9.5 in. L x 7.0 in. W x 2.0 in. H/24.1 cm L x 17.8 cm W x 5.1 cm H 9.25 in. L x 5.75 in. W x 1.0 in. H/23.5 cm L x 14.6 cm W x 2.54 cm H Weight: 1.0 lbs./0.45 kg 1.6 lbs./0.73 kg 802.11h Part number:* WSAP-5110-100-WWR; WSAP-5110-050-WWR WSAP-5100-100-WWR; WSAP-5100-050-WWR Enables worldwide operation through support Available mounting configurations: Ceiling-mount (to suspended ceiling T-bars, below tile); wall mount Ceiling-mount (above tile); wall-mount for standards-based Plenum rated: No Yes, certified to UL 2043 dynamic frequency LED indicators: 2 LED indicators with multiple modes indicating 802.11a/802.11g Activity, Power, Sensor, Adoption and Errors selection and power control Wireless Data Communications and Networking 802.3af Data rates supported: 802.11a: 6, 9, 12, 18, 24, 36, 48 and 54 Mbps; 802.11b/g: 1, 2, 5.5, 6, 9,11, 12, 18, 24, 36, 48, 54 Mbps Simplifies and reduces total Network standard: 802.11a, 802.11b, 802.11g cost of installation through support of standards-based Wireless medium: Direct Sequence Spread Spectrum (DSSS) and Orthogonal Frequency Division Multiplexing (OFDM) Power-over-Ethernet (PoE) VLANs/WLANs supported: WS2000 — 4 VLANs/8 WLANs; WS5100 — 32 VLANS/32 WLANs; RFS6000 — 32 VLANs/32 WLANs; RFS7000 — 256 VLANs/256 WLANs Uplink: Auto-sensing 10/100Base-T Ethernet Dual form-factors Plenum-rated external Radio Characteristics antenna model with Frequency: 802.11b/g: 2.412 GHz to 2.484 GHz; 802.11a: 4.9 GHz to 5.875 GHz metal housing is ideal for FCC (US and Canada): 2.412 to 2.462 GHz; 5.150 to 5.250 (UNII -1); 5.725 to 5.850 (ISM) installation above ceiling tiles; the plastic internal- EU: 2.412 GHz to 2.472 GHz; 5.250 to 5.350 GHz (Country Specific) antenna housing allows Japan: 2.400 to 2.484 GHz; 5.150 to 5.250 GHz; 5.250 to 5.350 GHz for installation within the China: 2.412 GHz to 2.472 GHz 5.725 GHz to 5.850 GHz “carpeted-space” and provides cost-effective Operating channels: 802.11b/g: ETSI: 13; North America: 11; TELEC (Japan): 13 coverage via the integrated 802.11a: ETSI: Country Specific; North America: 12; UNII I, II, III; (approval for 5.4-5.7 GHz pending); TELEC (Japan): 8 2.4 GHz and 5.2 GHz Available transmit power 4-20 dBM antennas settings for 802.11a/b/g: Receiver sensitivity: 802.11b ( -dBm) 802.11g (-dBm) 802.11a (-dBm) Flexible mounting options 1 -96 6 -92 6 -91 Fast and easy installation 2 -93 9 -89 9 -88 with wall, ceiling and 5.5 -92 12 -87 12 -86 above-ceiling tile mounting 11 -87 18 -86 18 -86 options; internal antenna 24 -83 24 -83 36 -78 36 -77 version snaps on to T-bars 48 -74 48 -74 of suspended ceilings 54 -72 54 -72 without the use of any hardware; external antenna User environment version installs above Operating temperature: 32°F to 104° F/0°C to 40° C -4°F to 122° F/-20°C to 50° C ceiling tiles Storage temperature: -40°F to 158° F/-40°C to 70° C Operating humidity: 5%-95% (non-condensing) Operating altitude: 8,000 ft./2438 m Storage altitude: 15,000 ft./4572 m Electrostatic discharge: +/- 15 kV (Air), +/- 8 kV (contact) Power Specifications Operating voltage: 48 VDC @ 7W (typical), 36 VDC to 57 VDC (range) Operating current: 145mA @ 48VDC (typical) Integrated Power-over-Ethernet support: Standards-based IEEE 802.3af Antenna Specifications Type: Integrated 2.4 GHz and 5.2 GHz Dual-Antenna; elements with diversity Two RSMA and two RBNC connectors for external antennas (not included) Band: 2.4 GHz to 2.5 GHz; 4.9 GHz to 5.850 GHz (actual operating frequencies depend on regulatory rules and certification agency) VSWR: 2.4 GHz: Less than 2:1; 5.2 GHz: Less than 1.5:1 Antenna-specific Gain: 2.4 GHz:2 dBi; 5.2 GHz: 3.8 dBi Antenna-specific Regulatory Product safety certifications: UL 60950, cUL, EU EN 60950, TUV and UL 2043 (external antenna) Radio approvals: FCC (USA), Industry Canada, CE (Europe) and TELEC (Japan) * S-2000-1C-ABG-WWR (WS2000 and 1 AP300 (802.11a/b/g) bundle); WS-2000-2C-ABG-WWR (WS2000 and 2 AP300 (802.11a/b/g) bundle); WS-2000-2C-BG-WWR (WS2000 and W 2 AP300 (802.11b/g) bundle) ; WS-2000-1ES-ABG-WR; WS-2000-2ES-ABG-WR; WS-2000-2ES-BG-WR motorola.com Part number SS-AP300. Printed in USA 11/08. MOTOROLA and the Stylized M Logo are registered in the US Patent Trademark Office. All other product or service names are the property of their respective owners. ©2008 Motorola, Inc. All rights reserved. For system, product or services availability and specific information within your country, please contact your local Motorola office or Business Partner. Specifications are subject to change without notice.