Audio Post Production

| www.JoenasrApp.com 1
ON THE SUBJECT OF
AUDIO POST-PRODUCTION

WHAT IS AUDIO POST-PRODUCTION?
| What is involved? | The Steps | The Mixing Realm !
Audio Post-Production is the process of creating the soundtrack for a visual program of some
kind. Ever since silent movies began to talk, filmmakers have been looking to control and
improve the quality of the sound of their creation. As soon as creators realized there was a way
to control and enhance the sound of their pictures, Audio Post was born, and has been a fact of
life ever since. In Television, audio was originally "live", like the visual program it was part of. As TV
evolved, and the art form grew to include "videotaped" and "filmed" programming, the need for
Audio Post increased. Nowadays, it would be difficult to find any feature film or television show
that hasn't been through audio post.

What is involved in Audio-Post Production?
Audio-Post usually consists of several processes. Each different project may need some, or all of
these processes in order to be complete. The processes are:
1. Production Dialogue Editing
2. ADR (Automated Dialogue Replacement - if needed)
3. Sound Effects Editing and Design
4. Foley Recording (human sound and sound effects recorded in sync with the motion picture)
5. Music Composition
6. Music Editing
7. Mixing (also called re-recording in some countries)
8. Mastering
What does all that mean?
It's really pretty simple, once you know the breakdown:
1. Production Dialogue Editing - In order for the production audio recorded on the set or on
location to be properly mixed, a Dialogue Editor needs to properly prepare it. This means
locating the proper take from the recorded production audio, checking sync (so it actually
works with the picture properly), and eliminate extraneous noise so the Mixer has clean dialogue
to use during the Mix.
2. ADR (Automated Dialogue Replacement) - In cases where the production audio is too noisy,
or otherwise unusable (bad line reading, airplane fly-by, etc.) the Dialogue Editor will "cue" the
line for ADR. This means replacing that line or lines of dialogue using the Automated process of
Dialogue Replacement. This process takes place on the ADR Stage, a specialized recording
studio where the actor can record lines in sync with the picture. Once a replacement line of
dialogue has been recorded, the Dialogue or ADR Editor will check the sync carefully, editing
the take if necessary to precisely match it to the picture, and prepare it for the Mixing Stage. This
process is also known as "looping".
3. Sound Effects Editing& Design - Ever wonder how they made the sound of Darth Vader's
helmet breath, or the Empire's Tie Fighters, or that great train wreck sequence from "The
Fugitive"? - Sound Effects Editors and Sound Designers are how. The process of adding sound
effects (backgrounds like: air, rivers, birds, traffic, and hard effects like: gunshots, door slams,
body falls, etc.) has been the domain of sound effects editors for years. Although originally
edited using 35mm magnetic film, recent years have seen the development of many different
Digital Sound Editing systems. More and more projects are using digital technology because of
the efficiency and quality it can bring to sound effects. Sound Designers use digital and

analogue technology to create sound effects that have never been heard before, or to
artistically create specific "mood" sounds to complement the director's vision of the visuals.
4. Foley - Taking its name from Jack Foley, the Hollywood sound effects person generally
regarded as the "father" of these effects, Foley effects are sounds that are created by recording
human movement in sync with the picture. Different from the environmental backgrounds and
hard effects that comprise edited sound effects, Foley effects are sounds like footsteps, prop
movement, cloth rustling, etc. The players involved in this process are the Foley Mixer, who
records the sounds, and the Foley Walkers who create those sounds. After the Foley Effects are
recorded, the Foley Editor will make any slight timing adjustments necessary to ensure that they
are exactly in sync with the final picture.
5. Music Composition - Music for film/TV falls into three general categories: Score, Source and
Songs. The Composer is the individual hired with the responsibility to prepare the dramatic
underscore. Source music is that music we hear coming from an on screen or off screen device
of some kind; some examples are radio source music, phonograph records, TV show themes,
when seen on a TV set in the shot, and many other similar variations. Source music may be
original, or licensed from a number of libraries that specialize in the creation of "generic" music.
Songs may occupy either function, depending on the dramatic intent of the director. Using "Pulp
Fiction" as an example, Director Quentin Tarantino hired a Music Supervisor (Karyn Rachtman,
FYI) to "score" the picture using period music of the 1970's almost exclusively. Most contemporary
films use a combination of score and source music.
6. Music Editing - The Music Editor assists the Composer in the preparation of the dramatic
underscore. Frequently working also with the Music Supervisor the Music Editor will take timings
for the Composer, (usually during a spotting session )in order to notate the specific locations in
the film where underscore or source music will punctuate the narrative. Once the underscore is
recorded, and the source music gathered, the Music Editor will usually be the person who edits
or supervises the final synchronization of all music elements prior to the mix.
7. Mixing - The Mixers have the responsibility of balancing the various elements, i.e., - the
Dialogue (and ADR), Music, Sound Effects, and Foley Effects, in the final mix. The Dialogue Mixer,
(also called the Lead Mixer or Gaffing Mixer) commands the mixing stage; his partners in the mix
are the Effects Mixer and the Music Mixer. On large features, it is not uncommon to have an
additional mixer handling just the Foley effects. On huge pictures with tight deadlines, it is
possible that several teams of mixers are working simultaneously on numerous stages in order to
complete the mix by the release date.
8. Mastering - The final "magical" touch of the sound after a decent Mixing. It is the technical
and creative act of balancing, equalizing and enhancing, analog or digital tracks so that the
finished product will have attained the maximum musicality and competitiveness in the open
market. To simplify, Mastering is the process of putting anything on your final mix to make the
final sound goes from good to great to better in all its aspects.
What does the Production Sound Mixer do?
The production mix team is the individuals charged with recording your live dialogue, in sync
with the camera team. The Production Sound Mixer is your most important ally at this stage in the
movie's production. Although you will be anxious to complete as many setups as possible during

each shooting day, a little extra time given to the sound mixer to allow him to capture scene
ambience (called room tone/room noise) will pay off handsome dividends later during our
dialogue editing. The production mixer will have with him a boom operator, who handles the
boom mics, and usually a cable person, who will be in charge of wrangling the audio cables
needed to mike the set appropriately. Usually they will record on a Nagra recorder, but digital
recordings on Portable Time code DAT machines are becoming more common.
We Are Shooting Our Film On Location...What Now?
Generally, each day after the completion of the shoot, the production audio rolls will be sent to
an audio post house for transfer to "dailies" form. If the film is being edited filmstyle, using 35mm
mag audio and film dupes (as opposed to electronically, using an Avid or Lightworks edit
system), the production select takes will be transferred to 35mm mag film. This sprocket-based
medium will allow the film editor or assistant to sync that day's select film takes with the audio
track that corresponds to it.
If the production is being edited electronically, using a computer based edit system; the options
are a bit different. Frequently, a video post house will be engaged during shooting to telecine
the selected and printed film takes. In addition, they will transfer the production audio from
Nagra or DAT and generally synchronize the dailies onto some form of videotape, for later
digitizing into the Avid or Lightworks editing system.
Syncing dailies at the video house eliminated the need for the assistant film editor to do it, and
allows the assistant to load the editing system instead. An important task to accomplish during
the digitizing is for the assistant to correctly log in the dailies time code that is recorded on the
Nagra or DAT location tracks. This will allow the EDL (edit decision list) that is created later on to
accurately reflect the original time code that was shot with that scene, and allows the audio
post house to electronically automate the re-loading of the production dailies, should they need
to be replaced.
And this goes on all during the filming?
Yes. Dailies transfers will continue until there are no more dailies coming in, and shooting has
wrapped. During this time the editor may also need reprints of previously transferred takes, or
prints of previously unprinted takes. They are processed in the same manner.
We are done shooting... Now what happens?
Now the real fun begins. The editor has been syncing dailies all during shooting, choosing which
scenes should begin to form the final cut. During the next several weeks, the process of editing
will continue as the decisions are narrowed down to final choices. It is at this time that the final
form of the film begins to take shape. Although the film editor may have been assembling the
"editor's cut" during the shooting period, the first formal edit period is generally referred to as the
director's cut, and it is when the first full assembly of the film is refined.

Do I need Audio-Post during editing?
Well, yes. During the editing you may still need reprints of selected takes or outtakes. The audio
post facility will duplicate these for you. But the real job is starting to come into view: the locked
cut.
What is the 'Locked-Cut'?
In short, the final version of the finished film! Although it may receive a small edit here or there in
the next few weeks, the film is essentially "locked" into this form.
Audio Post begins now in earnest!
Once the cut has been locked, the film can be spotted for the placement of sound effects and
music. The Supervising Sound Editor, the Director and possibly the Film Editor and Composer will
gather at one or more spotting sessions to determine the film's audio post needs. "Spotting for
music" is the process of viewing the locked cut and deciding where the music score will be, and
where the source music will be needed. "Spotting for sound" is the process of determining: if and
where any dialogue problems may exist, so that ADR can be cued to be recorded where sound
effects are needed and what kind what Foley effects will be needed in the film, and where If
Sound design (the creation of special sound effects), will also be needed.
What actually happens after 'Spotting'?
The real job of audio post has now begun. In the next weeks or months, the sound editors will
locate and synchronize all of the sound effects needed in the film. If necessary, they will create
Field Recordings of new sound effects needed for the film. The Foley supervisor will cue all of the
Foley effects that will be open in browser PRO version Are you a developer? Try out the HTML to
PDF API pdfcrowd.com needed; they will be recorded by the Foley Mixer and the Foley Walkers;
the ADR supervisor will cue all of the Automated Dialogue Replacement lines that need to be
recorded during the ADR sessions, and the Music Editor will begin providing for the needs of the
Composer and/or music supervisor. The Dialogue editor(s) will begin preparing the production
audio for final mixing, and the ADR editors can commence editing in the ADR lines, once they
have been recorded.
Typically, the next few weeks or months are occupied with sound editing of all types. The
Director will be checking on the various aspects of the sound job as time progresses, to be sure
that his vision is being realized. Usually, there is provision for one or more "effects reviews" where
the effects are listen to and approved. The same goes for Foley, Dialogue, ADR, Sound Design
and Music. When everything is completed and approved, the next step is Mixing (also called
'dubbing' or 're-recording').

What happens during the Mix?
During the mix, the edited production dialogue and ADR, sound effects, Foley and Musical
elements that will comprise the soundtrack are assembled in their edited form, and balanced by
a number of mixers to become the final soundtrack. In New York, open in browser PRO version
Are you a developer? Single-mixer-sessions are more commonplace than in Hollywood, where
two-mixer and three-mixer teams are the norm. The mixers traditionally divide the chores
between themselves: the Lead Mixer usually handles dialogue and ADR, and may also handle
music in a two-man team. In that case, the Effects mixer will handle sound effects and Foley. In
three-man teams, they usually split Dialogue, Effects and Music; sometimes the music mixer
handles Foley, sometimes the effects mixer covers it. To keep the mix from becoming
overwhelming, each mixer is actually creating a small set of individual sub-mixes, called STEMS.
These mix stems (dialogue, effects, Foley, music, adds, extras, etc.) are easier to manipulate and
update during the mix.
When Mixing is done, what then?
After the mix is completed and approved, films generally require a last step called Print-
mastering, which combines the various stems into a final composite soundtrack. When this is
completed, an optical or digital sound track can be created for a feature film release print. It is
also usual at this time to run a 'M & E' (which stands for Music and Effects) track. This is essentially
the film's soundtrack with the English language dialogue removed. This allows foreign language
versions of the project to be dubbed easily, while preserving the original music, sound effects
and Foley. During the M & E, effects or Foley that are married to the production dialogue tracks
are removed along with the dialogue. To "fully fill" an M & E for a quality foreign release, those
effects and Foley must be replaced. Television movies usually do not require print masters, unless
they have been created using SURROUND SOUND techniques. In most cases, the final stems are
combined during a process called LAYBACK, at which time the soundtrack is united with a final
edited master videotape for ultimate delivery.
What about "Optical Soundtracks"?
Almost all of the release formats, including the digital ones have provision for some kind of
optical soundtrack, even if only as a backup. The optical soundtrack refers to the two-channel
soundtrack that is carried on the optical track of the film release print.
How do I get an "Optical Soundtrack"?
Once your surround sound format has been selected (see the paragraph below for more), you
need to order an optical soundtrack negative for the film. In the case of LCRS mixes, a
traditional two-channel; Print-master track is created, and this is sent to an optical sound house
for the creation of the optical negative. The optical sound house will record the soundtrack onto
35mm film using a special camera, and some will also develop their own soundtrack masters.
Once the optical negative is shot and developed, it can be incorporated into your answer

printing process, and a composite answer print containing your complete soundtrack can be
printed or "shot" at your film lab. This usually happens during the first or second trial answer print
phase.
Now what about those names we keep hearing or reading on Movie Posters:
THX - Dolby - Ultra/Stereo - DTS - SDDS?
This is a BIG question. This one point alone causes much confusion amongst filmmakers. Please
take a moment and read this paragraph carefully. If you need more information after that,
please contact either Gnome Productions or Magnolia Studios and we will help you out.
First, about THX!
THX [tm] is not something that you DO to your soundtrack, it is just a set of sound reproduction or
mixing conditions that optimize the sound of your film's soundtrack in exhibition. Simply put, the
THX standards that many dubbing stages and movie theatres adhere to are a way of being
certain that "what you mix is what you get", so to speak. You may choose to mix in a stage that is
THX certified, and you may not. If you do, your soundtrack should sound reasonably the same in
THX theatres all around the world. It is this standardization that THX brings to the filmmaking
community.
To make sense out of the rest of the names, we need to know about Film (and Television)
Surround Sound Film sound tracks (and some television ones) go beyond just Left and Right
Stereo Channels; there is a Center Channel (CC) for the dialogue, and at least one ‘Surround
Sound’ Channel (SSC).
The SSC is used to project the sound out into the theatre, to "surround" the audience. This is to
enhance the illusion of being "in the picture". This ‘four-channel format’ is called LCRS (for the
Left, Center, Right and Surround channels that the soundtrack contains). Although the technical
means behind this process is beyond the scope of this discussion, suffice it to say that it works
well enough to have become a standard format for release prints for many years.
LCRS - You've probably already figured out that you cannot reproduce a four-channel
soundtrack from a medium that only plays back two tracks. You are very right. In order to
reproduce the LCRS soundtrack from a traditional film optical soundtrack (more on optical later)
you need a way to encode the channels....the Matrix The Surround Sound Matrix Encoder (or,
how to put FOUR into the space where TWO should go!) The solution is to use an encoding
device that can fold the four channels of audio down into the two channels available on the
film's optical soundtrack. When the audio tracks have been processed this way, they are
labeled Lt/Rt [Left total/Right total] in order to distinguish them from ordinary Left/Right Stereo
soundtracks.
The Surround Sound Matrix Encoder is a necessary piece of hardware that the audio post house
must have available during your film's mix, in order to create the surround soundtrack.
The Licensing of Surround Sound formats now we're really getting into the heart of the matter.

Dolby Labs, Ultra-Stereo Labs, DTS (Digital Theater Systems) and Sony [SDDS] all have
technologies available for the encoding of film surround soundtracks into film release prints.
Although these processes vary somewhat as to their method, they essentially accomplish similar
things. Additionally, some of these vendors offer Digital Encoding Additionally, some of these
vendors offer Digital Encoding formats (Dolby Digital, DTS and SDDS currently, and Ultra-Stereo
soon to come.
The Differences in Surround Sound formats...
In the most basic form, Theatrical Surround Sound consists of LCRS: Left, Center, Right, and mono
Surround. A soundtrack can be encoded into this format by using a Dolby or Ultra-Stereo
encoding matrix during the film's Print-mastering session. DTS also has a process called DTS Stereo
that can create a typical LCRS film soundtrack (check with DTS directly for more on their specific
processes...).
Surround Sound formats beyond L-C-R-S: Some of the surround sound encoding processes can
create different, more complex soundtrack formats; Dolby SR/D and DTS, for example, can
create six-track soundtracks for release, and Sony's SDDS is an eight-track format. In the case of
six tracks, you get Left, Center, Right, Left Surround, Right Surround and a Subwoofer channel (for
enhanced low-frequency response). The split surrounds (as they are called) make it possible to
move sounds around in the surround speakers, or to use stereo background sounds for even
more impressive film soundtracks (Jurassic Park comes to mind, here).
And if you heard ‘Jurassic Park’ in a good THX theatre with a DTS open in browser Pro version -
Are you a sound developer or critic? Digital soundtrack, you should know what the Sub-woofers
are there for! That T-Rex really gave the sub-woofers a run for their money, as well as Jeff
Goldblum... Six-track sound reproduction has been with us for a while, since 70mm film releases
have had the ability to deliver a six-track soundtrack that was magnetically encoded on the
release print. This, unfortunately, was very expensive to produce, and problematic to control
quality. Sony's SDDS (Sony Dynamic Digital Sound) uses an eight-track delivery configuration that
adds two speakers in between the Left/Center and Center/Right positions in the front speaker
wall. Known variously as InterLeft, InterRight or LeftCenter and RightCenter, these channels allow
for additional separation of music, effects and dialogue in the front speaker wall, while
preserving the split surround format.
The Differences in Digital Sound delivery methods, the three digital systems (Dolby, DTS and
SDDS) use proprietary methods to deliver the digital audio to the theatre; two of these methods
(Dolby, SDDS) encode the digital soundtrack onto the release print.
DTS uses a different method, that of encoding a "timing stripe" onto the release print, and
synchronizing a digital audio playback from an accompanying CD-ROM that carries the
encoded soundtrack. In either case, the digital audio is reproduced in the theatre with the same
fidelity it was recorded at during the encoding process. This system neatly bypasses the
traditional limitations of optical soundtracks:
Noise, Bandwidth limitations, and Headroom (transient peak) Limits.

Soundtracks sound cleaner, clearer and louder as a result. Please don't take this as a
condemnation of optical soundtracks. A well-mixed movie can (and they still do) sound great
with a well-produced optical soundtrack.
To summarize this difficult topic!
 THX specify a set of standards that affect how sound is recorded and reproduced in a
movie theatre. You get the benefits of the THX standard whenever you mix in a THX-
certified mixing stage. There is no additional fee required. You may display the THX logo
in your film's credits if you sign a simple one-page form.
 Dolby Surround is a 4-channel optical surround format; this format is encoded in the
optical soundtrack You must license this format from Dolby Labs; There is a license fee for
this service.
 Ultra-Stereo is a 4-channel optical surround format; this format is encoded in the optical
soundtrack You must license this format from Ultra-Stereo Labs; There IS a license fee for
this service.
 DTS is a 6-channel digitally-encoded surround format; this format is encoded on an
external CD-ROM, but the timing and other information in encoded on the film release
print; You must license this format from Digital Theatre Systems (DTS). There is a license fee
for this service.
 Dolby Digital is a 6-channel digitally-encoded surround format; it is encoded on the film
release print; You must license this format from Dolby Labs; There is a license fee for this
service.
 SDDS is an 8-channel digitally-encoded surround format; it is encoded on the film release
print; You must license this format from Sony Corporation - SDDS division; There is a license
fee for this service.
What's this DVD, AC-3?
Relax - take a breath - and we'll walk you through this...
It's actually pretty simple Surround Sound program on video materials are now released in a
number of analog and digital forms... Straight Left-Right Stereo program is still utilized a lot for
Television, and Industrial formats... VHS Home video releases can be encoded in Dolby Surround
(L,C,R,S), just like feature films; Laserdisc releases have also been using digitally encoded L,C,R,S
surround formats, just like VHS New Digital Video Release Formats allowed for new Digital Sound
Format AC-3.
AC3 - is a digitally-encoded surround sound format that is capable of reproducing six tracks of
sound AC-3 actually refers to Dolby's Audio Compression 3 format used to compress the data

DVD releases are also utilizing AC-3 digital sound format as well as traditional Surround Sound All
of these formats can easily be handled or prepared by a knowledgeable sound house.
My Print Isn't In Sync!
Well, we didn't say this would be easy, just that we could help take some of the mystery out of it
for you...You should Immediately contact your post-sound house and tell them what you've
experienced. The Sound Supervisor on your show should be willing to take some time and help
you sort this out. In the meantime, here are a few things that you can check on:
Some likely possibilities
(1) If the Final Mix Printmaster has been transferred or copied, be sure the copy was done
correctly. We have had experiences where a perfectly fine Printmaster was thrown out of sync
because a copy was made first, and the optical shot from the copy;
(2) If the soundtrack DRIFTS from being in sync to gradually being more and more OUT of sync
during the reel, suspect this possibility: If the Printmaster is on Multitrack tape, the SMPTE code on
the tape could cause the optical soundtrack to drift in speed; If you mixed to VIDEO TAPE, a
slight difference between 29.97 frame code and 30.00 frame code could throw you out of sync
by many frames over 1000 film feet. If the soundtrack was shot on Mag, a mistake in running the
film chain at video speed could cause the Mag to be "off-speed", just like the Multrack tape
example above;
(3) If the Mag Printmaster was in sync when you reviewed the final mix, check to be sure the film
lab didn't accidentally "misprint" the soundtrack by moving the optical negative a perf or two, or
a frame or two when they married it to the picture. This can easily happen IF THE HEAD POP or
TAIL POP is not EXACTLY CORRECT on your final Printmaster.
(4) If you print mastered in 2000-foot film reels, and FOR ANY REASON these reels were then
separated and rejoined later, this poses a prime opportunity for sync to slip. If the beginning of a
2000 foot reel is in sync, and the last 1000 feet is suddenly (and consistently) out of sync until the
end of the reel, suspect this phenomenon immediately.
(5) If one or two shots suddenly are out of sync but were IN sync when you mixed, ask yourself
this: did you mix from an Avid or Lightworks (or other electronic edit system) output? If so, it's
possible the film negative was not cut to the exact same shot length as the electronic
output; Have you verified the length of all optical effects? If you have inserted optical effects,
they may not have been counted exactly right, and you may have gained (or lost) a perf or
frame or two in the effect; either way, your soundtrack will lose sync right then and there, and
STAY out of sync for the rest of the reel (unless another optical effect error magically puts it back
in sync again!)
(6) Finally, when all else fails, it is remotely possible that the optical negative might be off-speed.
A quick call to the optical sound house will help them verify this for you. accepted standards.

For further questions, please feel free to send an email to joe.nasr@aol.com or simon.laham@aol.com, or visit the site.

Audio Post Production

More Related Content

What's hot

Viewers also liked

Similar to Audio Post Production

More from Joe Nasr

Recently uploaded

Audio Post Production