Bearing

Bhausaheb Vartak Polytechnic
A PRESENTATION
ON
BEARING
Prepared By
AKASH PANCHAL
S.Y.P.T – 1429

2/18/2013 Author - Akash Panchal 1429

Bearing


What Is Bearing

A bearing is a machine element that constrains
relative motion between moving parts to only
the desired motion..

The term "bearing" is derived from the verb "to
bear; a bearing being a machine element that
allows one part to bear (i.e., to support)
another.


History

The invention of the rolling bearing, in the form of
wooden rollers supporting, or bearing, an object
being moved is of great antiquity, and may predate
the invention of the wheel.

Leonardo da Vinci incorporated drawings of ball
bearings in his design for a helicopter around the
year 1500. This is the first recorded use of bearings in
an aerospace design.


Today ball and roller bearings are used
in many applications which include a
rotating component. Examples include
ultra high speed bearings in dental
drills, Aerospace Bearings in the Mars
Rover, gearbox and wheel bearings on
automobiles, flexure bearings in
optical alignment systems and bicycle
wheel hubs.

Function Of A Bearing
The main function of Bearing is rotating shaft is to
transmit power from one end of the line to the
other.

It needs a good support to ensure stability and
frictionless rotation. The support for the shaft is
known as “bearing”.

The shaft has a “running fit” in a bearing. All
bearing are provided some lubrication arrangement
to reduced friction between shaft and bearing.
2/18/2013
Author - Akash Panchal 1429

Bearings are classified under two main
categories:

Plain or slider bearing : -

In which the rotating shaft has a sliding
contact with the bearing which is held
stationary . Due to large contact area
friction between mating parts is high
requiring greater lubrication.

Rolling or anti-friction bearing: Due to less
contact area rolling friction is much lesser
than the sliding friction , hence these
bearings are also known as antifriction
bearing.
2/18/2013

Ball and roller bearings
Frictional resistance considerably less than in plain bearings

Rotating – non-rotating pairs separated by balls or rollers

Ball or rollers has rolling contact and sliding friction is
eliminated and replaced by much lower rolling friction.

In plain bearing the starting resistance is much larger than the
running resistance due to absence of oil film.

In ball and rolling bearings the initial resistance to motion is
only slightly more than their resistance to continuous running.

Types of rolling bearing
• Incorporating a deep hardened
Single row raceway which makes them
suitable for radial and axial loads
deep-groove in either direction, provided the
ball bearing: radial loads are greater than the
axial loads.

• Roller bearing have a greater
Single row load-carrying capacity than ball
roller bearing of equivalent size as they
make line contact rather than
bearing: point contact with their rings.


Ball and Roller bearing

Races and balls are high carbon • The cages are made of low-carbon steel,
chrome steel (to provide resistance
bronzes or brasses, though for high
to wear) machined and ground to
fine limits of 0.0025 mm, highly temperature application case-hardened
polished and hardened. and stainless steels are used.


The Ball And Roller Bearing Consists Following Parts:-

 Inner ring or race which fits on
the shaft.
 Outer ring or race which fits
inside the housing.
 Ball and roller arranged
between the surfaces of two
races. These provide rolling
action between the races.
 The radius of the track for balls is
slightly greater 5 to 10 % than that
of the ball themselves.
 Note that the rotating surfaces
rotate in opposite directions.
 Cage which separates the balls
The Disadvantage of the ball and roller or rollers from one another.
bearings are high cost, they cannot be
used in half, and greater noise. Author - Akash Panchal 1429
2/18/2013

Types of ball bearings
Double Row Self-Aligning
Single And Double Row Roller Bearing
Deep grove ball bearing
Angular contact ball bearing
Cylindrical roller bearing
Tapered roller bearing
Self-aligning roller bearing
Needle ball bearing
Thrust ball bearing
2/18/2013

Prelubricated sealed ball bearing


2/18/2013

Selection of bearing through catalogue


Bearing Arrangement
Shafts are generally supported by two
bearings in the radial and axial directions.

The side that fixes relative movement of the shaft and housing in the
axial direction is called the “fixed side bearing," and the side that allows
movement is called the "floating side bearing."

The floating side bearing is needed to absorb
mounting error and avoid stress caused by
expansion and contraction of the shaft due to
temperature change.
2/18/2013

Positions of bearing


Bearing fits:
Extreme fits, whether loose or tight, are not
recommended. The effect of press fits on contact angle
or radial play must be considered.

Size tolerance of the shaft and housing should be equal
to those of the bearing bore .Surface finish should be
held as close as possible.

Extreme fits will depend upon tolerances on the
bearings, shaft, and housing


Adhesives offer several advantages in producing proper fits:

End play can be removed by applying a light external thrust load during curing
time.
Extreme fits can be eliminated, since the adhesive will fill up any reasonable
clearance.
Rotational accuracy can be improved by driving the shaft at slow speed during
cure time.

Disadvantages to using adhesives include:

Certain adhesives are attacked by lubricants or solvents.

To ensure a good bond, bearing surface, shaft, and housing must be
thoroughly clean of oil and dirt.

Adhesives may get into the bearing and cause damage.
2/18/2013

Axial positioning:
Accurate axial positioning of the shaft relative to the housing requires shoulders,
snap rings, or bearing flanges.

Shaft and housing shoulders: Diameter of a shaft or housing shoulder must be
sufficient to ensure solid seating and support for applied thrust loads, yet small
enough to avoid interference with other parts of the bearing. Fit accuracy between
shoulder and mounting diameter should be as good as bearing accuracy.

The corner between the shoulder and mounting diameter should be undercut
because undercutting provides a more accurate machining of the shoulder surface.
However, a radius is permissible if proper clearance is allowed.


Retaining rings: Certain cautions must be observed with this
method:

Recommendations as to the groove dimensions should be followed.

Locating grooves machined into the shaft or housing must be
controlled for squareness of groove face to bearing mounting
diameter. Recommended value is 0.0002-in.

Avoid a snap ring that locates directly on the shaft or housing
diameter (no groove) if heavy thrust loads are involved.

Flanges: Squareness of face-to-bore of the housing is critical and
should be maintained to within 0.0003-in
2/18/2013

Classification of the sliding contact
bearing

JOURNAL BEARING

FOOTSTEP BEARING

COLLAR THRUST BEARING

Journal bearing – in this the bearing pressure is exerted at right angles to the
axis of the axis of the shaft. The portion of the shaft lying within the bearing in
known as journal. Shaft are generally made of mild steel.

Foot step or pivot bearing – in this bearing the bearing pressure is exerted
parallel to the shaft whose axis is vertical. Note that in this case the end of the
shaft rests within the bearing.

Thrust bearing – in this bearing supporting pressure is • Thrust bearings
parallel to the axis of the shaft having end thrust. Thrust
also known as
bearing are used in bevel mountings, propeller drives,
turbines, etc. note here the shaft ,unlike foot-strep “collar
bearing passes through and beyond the bearing. bearing”.

2/18/2013

Journal Bearing
• It is simply a block of cast iron
with a hole for the shaft

Simple providing running fit. An oil hole
is drilled at the top for
lubrication.

journal or • The main disadvantage of this
type of bearing are
• There is no provision for wear

solid and adjustment on account of
wear.
• The shaft must be passed into

bearing the bearing axially, i.e.
endwise.
• Limited load on shaft and
speed of shaft is low.

Footstep or pivot bearing
It suitable for supporting a vertical shaft with axial loads.

In a footstep bearing a gun metal bush having a collar on top is placed inside the
C.I. sole. The end of the shaft rests on a gun metal disc placed at the bottom in the
bush.

The disc is prevented from rotation with the help of a pin or sung fitted in the sole.
The disc act as a thrust bearing whereas the bush fitted in the casting supports the
shaft in position. The bush can take radial loads, if any, on the shaft.

The disadvantage of footstep bearing is that it cannot be efficiently lubricated and
there is unequal wear on the bottom disc.

Thrust bearing
A thrust bearing is a particular type of
rotary bearing. Like other bearings they
permit rotation between parts, but they are
designed to support a high axial load .

Thrust • Thrust Ball Bearings
• Cylindrical Thrust Roller Bearings
Bearings come • Tapered Roller Thrust Bearing s
in several • Spherical Roller Thrust Bearings
varieties.

A spherical roller thrust bearing A thrust ball bearing


Bush Bearing

In this the bush of soft material like
brass or gun metal is provided and the
body or main block is made of cast iron.
Bush is hollow cylindrical piece which is
fitted in a housing to accommodate the
mating part. When the bush gets worn
out it can be easily replaced.


Bush Bearing
The outside of the bush is a driving fit (interference fit) in the hole
of the casting where as the inside is a running fit for the shaft.

The bearing material used may be white metal (Babbit –
Tin/Cu/Lead/antimony) , copper alloy (brass, gunmetal) or
aluminum alloy.

Solid bushes are entirely made of bearing material and find the
general application. In lined bush as the bearing material is applied
as a lining to a backing material .

Applications: turbines, large diesel engines etc

Bush and Direct-lined housing

Direct lined housings

In this type of the housing is lined directly by means of
metallurgical bonding.
Low-melting point white metal is used as a lining on the cast iron
housing


Plummer block or Pedestal bearing
It is a split type of bearing. This type of bearing is
used for higher speeds, heavy loads and large sizes.

• Cast iron pedestal or block with a sole
The component of • Brass or gun-metal or phosphorus-bronze
“Brasses”, bushes or steps made in two halves.
the bearing: • Cast iron cap.
• Two mild steel bolts and nuts.

This bearing facilitates the placements and removal
of the of the shaft from the bearing.


Prevention of rotation of brasses
The steps are made octagonal on the outside and they are
made to fit inside a corresponding hole.

A snug is cast on the lower brass top which fits a
corresponding hole in the casting. The oil hole is drilled
through the sung.

Snug are provided at the side, and the corresponding
recesses left in the casting

The steps on the lower brass are made rectangular on the
outside and they are made to fit inside a corresponding
hole.

Prevention of rotation of brasses


Bearing Life Calculation
Calculations Rolling bearings Bearing life
Equivalent bearing loads and basic rating life
Minimum load
Viscosity
Dynamic axial load carrying capacity of cylindrical roller bearings
Frictional moment - power loss
Relubrication intervals
Grease life for sealed deep groove ball bearings
Bearing frequencies
Influence of load and oil viscosity on reference speed/permissible speed
CARB, axial displacement - misalignment
CARB, axial displacement - clearance
CARB, free space on the sides of the bearing
Shaft tolerances and resultant fits
Housing tolerances and resultant fits
SKF Bearing Select
SKF DialSet
Plain bearings Spherical plain bearings and rod ends - Basic rating service life
Frictional moment
Composite dry sliding bearings - Basic rating service life

Advantages and disadvantages of the
plain bearing
Plain bearing are cheap to produce and have noiseless
operation. They can be easily machined, occupy small
radial space and have vibration damping properties.
Also they can cope with tapped foreign matter.

Disadvantages are they require large supply of
lubricating oil, they are suitable only for relative low
temperature and speed; and starting resistance is much
greater than running resistance due to slow build up of
lubricant film around the bearing surface.


Bearing

More Related Content

What's hot

Viewers also liked

Similar to Bearing

Bearing