C 9103

C 9103

• 1.
  Conventional Dual Heat DetectorC-9103 Detector Installation It is installed onto a standard one gang electrical box with a mounting hole that have 6.5cm spacing. Point the detector in the base by the mark-line and secure the detector in that position by rotates it clockwise until it reaches the next mark line. EMBEDDED BOX CONCRETE PAD OR HOLDING PAD MARK−LINE Features and Benefits 1. 2. 3. 4. Fixed Temperature and Rate of Rise Detection Built-in Remote Indicator Output Twin LED for 360º vision Low profile design Description LED INDICATOR ROTATE CLOCKWISE Wiring and Connection Connect the wires to the required terminal according to the wire diagram with matching active end of line (P-9907).and (DZ-03D) required base. Using active end of line can connect up to 15 detectors and base with diode. Using 4.7KΩ end of line resistor can connect up to 25 detectors. The cable must be fire rated type and the size depends on the distance and application. Minimum size gauge 1.0mm²(18 AWG) CONVENTIONAL PANEL OR + C-9103 Conventional Rate of Rise and Fixed Temperature Heat Detector (hereinafter called the detector) checks ambient temperature with the sensitive feature of thermo-sensitive elements. With a built-in SCM, it’s fixed with highly reliable fire judging program. Special processing technology ensures its stable and reliable operation. Matching with P-9907 Active End of Line Unit, it can connect with compatible fire alarm controller to conduct the processing of detector signals. 2ND MARK−LINE ZONE MONITOR MODULE − 1 2 1 2 1 4 3 4 3 2 4 3 P−9907 ACTIVE END OF LINE Technical Specifications C−9103 HEAT DETECTOR C−9103 HEAT DETECTOR C−9314P Remote Indicator • • • • • • • • • • • • • Standard: EN54-part5,part6 Approval: LPCB,CE Protection rating: IP 32 Detecting Range: 30 sqm for normal area; and 20 sqm for high risk Operating voltage: 24Vdc (9Vdc to 24Vdc) polarized Operating Current: Stanby: 0.8mA; Alarm: 1.4mA Operating temperature: -10°C to +50°C Relative humidity: 95% Application: Indoor use Material and colour: ABS, off-white Wiring: 1 pair polarized Dimensions: diameter 10cm; height 5cm Selection of compatible Control Panels Compatible with all GST Conventional panel and GST Intelligent Fire Alarm Panels using Zone monitor module: − + 1 2 FROM CONTROL PANEL 1 PAIR FIRE CABLE TO NEXT DEVICE 1 PAIR FIRE CABLE HOLE HOLE 4 3 Ordering Information: Part No C-9103 DZ-03 DZ-03D Description Conventional Dual Heat Detector Detector Base -EOLR Base with Diode AOL Weigh t/Kg 0.123 Pack Qty per Box 120 0.05 0.05 360 360 MANUFACTURED IN ACCORDANCE WITH Note: Specifications are subject to change without notice.