C Programming Unit-2

Introduction to Decision Control statements:
Using decision control statements we can control the
flow of program in such a way so that it executes
certain statements based on the outcome of a
condition (i.e. true or false). In C Programming
language we have following decision control
statements.
1. if statement
2. if-else & else-if statement
3. switch-case statements

The conditional branching statements help to jump
from one art of the program to another depending on
whether a particular condition is satisfied or not.
Generally they are two types of branching statements.
1. Two way selection
- if statement
- if-else statement
- if-else-if statement or nested-if
2. Multi way selection
- switch statement

IF:
The if statement is a powerful decision making
statement and is used to control the flow of execution
of statements. It is basically a two way decision
statement and is used in conjunction with an
expression. It takes the following form
if(test-expression)
It allows the computer to evaluate the expression first
and them depending on whether the value of the
expression is "true" or "false", it transfer the control to
a particular statements. This point of program has two
paths to flow, one for the true and the other for the
false condition.

if(test-expression)
{
statement-block
}
statement-x;
Example: C Program to check equivalence of two
numbers using if statement
void main()
{
int m,n,large;
clrscr();
printf(" n enter two numbers:");
scanf(" %d %d", &m, &n);
if(m>n)
large=m;
else
large=n;
printf(" n large number is = %d", large);
return 0;
}

if-else statement:
The if-else statement is an extension of the simple
if statement. The general form is
if(test-expression)
{true-block statements
}
else
{
false-block statements
}
statement-x
If the test-expression is true, then true-block statements immediately
following if statement are executed otherwise the false-block
statements are executed. In other case, either true-block or false-block
will be executed, not both.

Example: C program to find largest of two numbers
void main()
{
int m,n,large;
clrscr();
printf(" n enter two numbers:");
scanf(" %d %d", &m, &n);
if(m>n)
large=m;
else
large=n;
printf(" n large number is = %d", large);
return 0;
}

Nested if statement
If(test-condition-1)
{
if(test-condition-2)
{
statement-1;
}
else
{
statement-2;
}
}
else
{
statement-3;
}
statement-x

Iteration:
Iteration is the process where a set of instructions or
statements is executed repeatedly for a specified
number of time or until a condition is met. These
statements also alter the control flow of the program
and thus can also be classified as control
statements in C Programming Language.

Iteration statements are most commonly know as loops.
Also the repetition process in C is done by using loop
control instruction. There are three types of looping
statements:
For Loop
While Loop
Do-while loop
A loop basically consists of three parts:
initialization,testexpression, increment/decrement or upd
ate value. For the different type of loops, these
expressions might be present at different stages of the
loop. Have a look at this flow chart to better understand
the working of loops(the update expression might or
might not be present in the body of the loop in
case break statement is used):

FOR LOOP:
Example:
#include <stdio.h>
int main()
{
int i;
for(i=1; i<=5; i++)
printf("CodinGeekn");
return 0;
}
for(initialization; test expression; update expression)
{
//body of loop
}
Output:-
CodinGeek
CodinGeek
CodinGeek
CodinGeek
CodinGeek

DIFFERENT TYPES OF FOR LOOP
INFINITE FOR LOOP
An infinite for loop is the one which goes on
repeatedly for infinite times. This can happen in two
cases:
1.When the loop has no expressions.
for(;;)
{
printf("CodinGeek");
}
2.When the test condition never becomes false.
for(i=1;i<=5;)
{
printf("CodinGeek");
}

EMPTY FOR LOOP
for(i=1;i<=5;i++)
{ }
NESTED FOR LOOP:
for(initialization; test; update)
{
for(initialization;test;update)//using another variable
{
//body of the inner loop
}
//body of outer loop(might or might not be present)
}

Example:
The following program will illustrate the use of nested loops:
#include <stdio.h>
int main()
{
int i,j;
for(i=1;i<=5;i++)
{
for(j=1;j<=i;j++)
printf("%d",j);
printf("n");
}
return 0;
}
Output:-
1
12
123
1234
12345

Break Statement:
The break statement terminates the loop (for, while
and do...while loop) immediately when it is
encountered. Its syntax is:
break;

Example 1: break statement
// Program to calculate the sum of maximum of 10 numbers
// If negative number is entered, loop terminates and sum is displayed
# include <stdio.h>
int main()
{
int i;
double number, sum = 0.0;
for(i=1; i <= 10; ++i)
{
printf("Enter a n%d: ",i);
scanf("%lf",&number);
// If user enters negative number, loop is terminated
if(number < 0.0)
{
break;
}
sum += number; // sum = sum + number;
}
printf("Sum = %.2lf",sum);
return 0;
}
Output
Enter a n1: 2.4
Enter a n2: 4.5
Enter a n3: 3.4
Enter a n4: -3
Sum = 10.30

continue Statement
The continue statement skips statements after it inside
the loop. Its syntax is:
continue;
The continue statement is almost always used
with if...else statement

Example : continue statement
// Program to calculate sum of maximum of 10 numbers
// Negative numbers are skipped from calculation
# include <stdio.h>
int main()
{
int i;
double number, sum = 0.0;
for(i=1; i <= 10; ++i)
{
printf("Enter a n%d: ",i);
scanf("%lf",&number);
if(number < 0.0)
{
continue;
}
sum += number; // sum = sum + number;
}
printf("Sum = %.2lf",sum);
return 0;
}
Output
Enter a n1: 1.1
Enter a n2: 2.2
Enter a n3: 5.5
Enter a n4: 4.4
Enter a n5: -3.4
Enter a n6: -45.5
Enter a n7: 34.5
Enter a n8: -4.2
Enter a n9: -1000
Enter a n10: 12
Sum = 59.70

 GOTO:
A goto statement in C programming provides an
unconditional jump from the 'goto' to a labeled
statement in the same function.
Syntax:
The syntax for a goto statement in C is as follows
goto label;
..
.
label: statement;
Here label can be any plain text except C keyword
and it can be set anywhere in the C program above or
below to gotostatement.

Example:
#include <stdio.h>
int main () {
/* local variable definition */
int a = 10;
/* do loop execution */
LOOP:do {
if( a == 15) {
/* skip the iteration */
a = a + 1;
goto LOOP;
}
printf("value of a: %dn", a);
a++;
}while( a < 20 );
return 0;
}
Output:
value of a: 10
value of a: 11
value of a: 12
value of a: 13
value of a: 14
value of a: 16
value of a: 17
value of a: 18
value of a: 19

C Functions
 In c, we can divide a large program into the basic
building blocks known as function. The function
contains the set of programming statements
enclosed by {}. A function can be called multiple
times to provide reusability and modularity to the C
program. In other words, we can say that the
collection of functions creates a program. The
function is also known as procedure or subroutine in
other programming languages.

SN C function aspects Syntax
1 Function declaration return_type function_name (argument list);
2 Function call function_name (argument_list)
3 Function definition return_type function_name (argument list) {function body;}
The syntax of creating function in c language is given below:
1. return_type function_name(data_type parameter...){
2. //code to be executed
3. }

Function Aspects:
There are three aspects of a C function.
 Function declaration A function must be declared globally in a c program to tell the
compiler about the function name, function parameters, and return type.
 Function call Function can be called from anywhere in the program. The parameter
list must not differ in function calling and function declaration. We must pass the same
number of functions as it is declared in the function declaration.
 Function definition It contains the actual statements which are to be executed. It is
the most important aspect to which the control comes when the function is called.
Here, we must notice that only one value can be returned from the function.
SN C function aspects Syntax
1 Function declaration return_type function_name (argument list);
2 Function call function_name (argument_list)
3 Function definition return_type function_name (argument list) {function body;}

Return Value:
 A C function may or may not return a value from the
function. If you don't have to return any value from
the function, use void for the return type.
 Let's see a simple example of C function that doesn't
return any value from the function.
 Example without return value:
void hello(){
printf("hello c");
}
 If you want to return any value from the function, you
need to use any data type such as int, long, char,
etc. The return type depends on the value to be
returned from the function.

 Let's see a simple example of C function that returns
int value from the function.
Example with return value:
int get(){
return 10;
}
 In the above example, we have to return 10 as a
value, so the return type is int. If you want to return
floating-point value (e.g., 10.2, 3.1, 54.5, etc), you
need to use float as the return type of the method.

Parameter Passing in C:
 Parameters are the data values that are passed from
calling function to called function.
 In C, there are two types of parameters they are
1. Actual Parameters
2. Formal Parameters
 The actual parameters are the parameters that are
speficified in calling function.
 The formal parameters are the parameters that are
declared at called function.
 When a function gets executed, the copy of actual
parameter values are copied into formal parameters.

 In C Programming Language, there are two methods
to pass parameters from calling function to called
function and they are as follows...
 Call by Value
 Call by Reference
Call by Value:
 In call by value parameter passing method, the
copy of actual parameter values are copied to formal
parameters and these formal parameters are used in
called function. The changes made on the formal
parameters does not effect the values of actual
parameters.

Example Program
#include<stdio.h>
#include<conio.h>
void main(){
int num1, num2 ;
void swap(int,int) ; // function declaration
clrscr() ;
num1 = 10 ;
num2 = 20 ;
printf("nBefore swap: num1 = %d, num2 = %d", num1, num2) ;
swap(num1, num2) ; // calling function
printf("nAfter swap: num1 = %dnnum2 = %d", num1, num2);
getch() ;
}
void swap(int a, int b) // called function
{
int temp ;
temp = a ;
a = b ;
b = temp ;
}
Output:

 Call by Reference
 In Call by Reference parameter passing method,
the memory location address of the actual
parameters is copied to formal parameters. This
address is used to access the memory locations of
the actual parameters in called function. In this
method of parameter passing, the formal parameters
must be pointer variables.
 That means in call by reference parameter passing
method, the address of the actual parameters is
passed to the called function and is recieved by the
formal parameters (pointers). Whenever we use
these formal parameters in called function, they
directly access the memory locations of actual
parameters. So the changes made on the formal
parameters effects the values of actual

Example Program
#include<stdio.h>
#include<conio.h>
void main(){
int num1, num2 ;
void swap(int *,int *) ; // function declaration
clrscr() ;
num1 = 10 ;
num2 = 20 ;
printf("nBefore swap: num1 = %d, num2 = %d", num1, num2) ;
swap(&num1, &num2) ; // calling function
printf("nAfter swap: num1 = %d, num2 = %d", num1, num2);
getch() ;
}
void swap(int *a, int *b) // called function
{
int temp ;
temp = *a ;
*a = *b ;
*b = temp ;
}
Output:

Scope of Variables:
 A scope is a region of a program. Variable Scope is
a region in a program where a variable is declared
and used. So, we can have three types of
scopes depending on the region where these are
declared and used –
1. Local variables are defined inside a function or a
block
2. Global variables are outside all functions
3. Formal parameters are defined in function
parameters

Local Variables:
 Variables that are declared inside a function or a
block are called local variables and are said to
have local scope. These local variables can only be
used within the function or block in which these are
declared.
 Local variables are created when the control reaches
the block or function containg the local variables and
then they get destroyed after that.

Example:
#include <stdio.h>
void fun1()
{
/*local variable of function fun1*/
int x = 4;
printf("%dn",x);
}
int main()
{
/*local variable of function main*/
int x = 10;
{
/*local variable of this block*/
int x = 5;
printf("%dn",x);
}
printf("%dn",x);
fun1();
}
Output
5
10
4

Global Variables
 Variables that are defined outside of all the functions
and are accessible throughout the program
are global variables and are said to have global
scope. Once declared, these can be accessed and
modified by any function in the program. We can
have the same name for a local and a global variable
but the local variable gets priority inside a function.

Example:
#include <stdio.h>
/*Global variable*/
int x = 10;
void fun1()
{
/*local variable of same name*/
int x = 5;
printf("%dn",x);
}
int main()
{
printf("%dn",x);
fun1();
}
Output
10
5

Storage Classes in C
 Storage classes in C are used to determine the
lifetime, visibility, memory location, and initial value
of a variable. There are four types of storage classes
in C
1. Automatic
2. External
3. Static
4. Register

Storage
Classes
Storage
Place
Default
Value
Scope Lifetime
auto RAM Garbage
Value
Local Within function
extern RAM Zero Global Till the end of the main program Maybe
declared anywhere in the program
static RAM Zero Local Till the end of the main program, Retains
value between multiple functions call
register Register Garbage
Value
Local Within the function

Automatic:
 Automatic variables are allocated memory automatically at runtime.
 The visibility of the automatic variables is limited to the block in which they are
defined.
 The scope of the automatic variables is limited to the block in which they are
defined.
 The automatic variables are initialized to garbage by default.
 The memory assigned to automatic variables gets freed upon exiting from the block.
 The keyword used for defining automatic variables is auto.
 Every local variable is automatic in C by default.
Example
#include <stdio.h>
int main()
{
int a; //auto
char b;
float c;
printf("%d %c %f",a,b,c); // printing initial default value of automatic variables a, b, and
c.
return 0;
}
Output:

Static:
 The variables defined as static specifier can hold their value between the
multiple function calls.
 Static local variables are visible only to the function or the block in which
they are defined.
 A same static variable can be declared many times but can be assigned at
only one time.
 Default initial value of the static integral variable is 0 otherwise null.
 The visibility of the static global variable is limited to the file in which it has
declared.
 The keyword used to define static variable is static.
Example
#include<stdio.h>
static char c;
static int i;
static float f;
static char s[100];
void main ()
{
printf("%d %d %f %s",c,i,f); // the initial default value of c, i, and f will be printed.
}
Output:

Register:
 The variables defined as the register is allocated the memory into the CPU
registers depending upon the size of the memory remaining in the CPU.
 We can not dereference the register variables, i.e., we can not use
&operator for the register variable.
 The access time of the register variables is faster than the automatic
variables.
 The initial default value of the register local variables is 0.
 The register keyword is used for the variable which should be stored in the
CPU register. However, it is compiler?s choice whether or not; the variables
can be stored in the register.
 We can store pointers into the register, i.e., a register can store the address
of a variable.
 Static variables can not be stored into the register since we can not use
more than one storage specifier for the same variable.
Example :
#include <stdio.h>
int main()
{
register int a; // variable a is allocated memory in the CPU register. The initial
default value of a is 0.
printf("%d",a);
}
Output:

External:
 The external storage class is used to tell the compiler that the variable
defined as extern is declared with an external linkage elsewhere in the
program.
 The variables declared as extern are not allocated any memory. It is only
declaration and intended to specify that the variable is declared elsewhere in
the program.
 The default initial value of external integral type is 0 otherwise null.
 We can only initialize the extern variable globally, i.e., we can not initialize
the external variable within any block or method.
 An external variable can be declared many times but can be initialized at
only once.
 If a variable is declared as external then the compiler searches for that
variable to be initialized somewhere in the program which may be extern or
static. If it is not, then the compiler will show an error.
Example 1
#include <stdio.h>
int main()
{
extern int a;
printf("%d",a);
}
Output
main.c:(.text+0x6): undefined reference to `a'collect2: error: ld returned 1 exit
status

Recursion in C
 Recursion is the process which comes into existence
when a function calls a copy of itself to work on a smaller
problem. Any function which calls itself is called recursive
function, and such function calls are called recursive
calls. Recursion involves several numbers of recursive
calls. However, it is important to impose a termination
condition of recursion. Recursion code is shorter than
iterative code however it is difficult to understand.
 Recursion cannot be applied to all the problem, but it is
more useful for the tasks that can be defined in terms of
similar subtasks. For Example, recursion may be applied
to sorting, searching, and traversal problems.
 Generally, iterative solutions are more efficient than
recursion since function call is always overhead. Any
problem that can be solved recursively, can also be
solved iteratively. However, some problems are best
suited to be solved by the recursion, for example, tower
of Hanoi, Fibonacci series, factorial finding, etc.

In the following example, recursion is used to calculate the factorial of a number.
#include <stdio.h>
int fact (int);
int main()
{
int n,f;
printf("Enter the number whose factorial you want to calculate?");
scanf("%d",&n);
f = fact(n);
printf("factorial = %d",f);
}
int fact(int n)
{
if (n==0)
{
return 0;
}
else if ( n == 1)
{
return 1;
}
else
{
return n*fact(n-1);
}

 We can understand the above program of the
recursive method call by the figure given below:

C Programming Unit-2

Recommended

More Related Content

What's hot (20)

Similar to C Programming Unit-2 (20)

More from Vikram Nandini (20)

Recently uploaded (20)

C Programming Unit-2