Download to read offline
![RGB Model
In this model, the primary colors are red, green, and blue. It is
an additive model, in which colors are produced by adding
components, with white having all colors present and black
being the absence of any color.
This is the model used for active displays such as television
and computer screens.
The RGB model is usually represented by a unit cube with one
corner located at the origin of a three-dimensional color
coordinate system, the axes being labeled R, G, B, and having
a range of values [0, 1]. The origin (0, 0, 0) is considered
black and the diagonally opposite corner (1, 1, 1) is called
white. The line joining black to white represents a gray scale
and has equal components of R, G, B.](https://image.slidesharecdn.com/chapter7-colorimageprocessing-240620193252-9a2881ad/75/Color-Image-Processing-ppt-24-2048.jpg)
![• The Gray Scale [0,L-1] is divided into L levels; where l0
represents Black (f(x,y)=0) and lL-1 represents white
(f(x,y)=L-1)
• Suppose that P planes perpendicular to the intensity axis
are defined at levels l1,l2…..,lp
• Then assuming that 0<P<L-1 the P planes partition the
gray scale into P+1 intervals, V1,V2…….Vp+1
Intensity Slicing](https://image.slidesharecdn.com/chapter7-colorimageprocessing-240620193252-9a2881ad/75/Color-Image-Processing-ppt-41-2048.jpg)
![Color Transformations
• Color transformation can be represented by the
expression ::
g(x,y)=T[f(x,y)]
f(x,y): input image
g(x,y): processed (output) image
T[*]: an operator on f defined over neighborhood of (x,y).
The pixel values here are triplets or quartets (i.e group of 3
or 4 values)](https://image.slidesharecdn.com/chapter7-colorimageprocessing-240620193252-9a2881ad/75/Color-Image-Processing-ppt-49-2048.jpg)
More Related Content
Similar to Color Image Processing................ppt
Color Image Processing................ppt
- 1. Computer Graphics Chapter Seven ColorImage Processing
- 2. The useof color Image Processing is motivated by two principal factors: Color is a powerful descriptor Humans can distinguish between thousands of color shades and intensities compared to about only two dozen shades of gray Color Image Processing
- 3. Full Color Processingvs Pseudo-Color Processing In Full Color Processing the image in question typically are acquired with a Full-Color sensor e.g. Color TV camera or Color Scanner In Pseudo-color Processing the problem is of assigning a color to a particular monochrome intensity or a range of intensities
- 4.
- 5.
- 6. Physical Background • Visiblelight: a narrow band of electromagnetic radiation → 380nm (blue) - 780nm (red) • Wavelength: Each physically distinct colour corresponds to at least one wavelength in this band.
- 7. Color Fundamentals Thecolors that humans and some animals perceive in an object are determined by the nature of light reflected from the object
- 8. Achromatic vs ChromaticLight Achromatic (void of color) Light: Its only contribute is its ‘Intensity’ or amount Chromatic Light: spans the electromagnetic spectrum from approximately 400 to 700nm
- 9. Quantities for descriptionof quantity of Chromatic Source of Light Three basic quantities are used to describe the quantity of a chromatic source of light: Radiance Luminance Brightness
- 10. Radiance The totalamount of Energy that flows from a Light Source It is measured in Watts
- 11. Luminance Luminance givesa measure of amount of energy an observer perceives from a light source (measured in Lumens(lm) ) For example light emitted from a source operating in Infrared region of Spectrum could have significant energy (Radiance) but a human observer will hardly perceive it so luminance is zero.
- 12. Brightness It isa subjective measure It embodies the achromatic notion of intensity and is one of the key factors in describing color sensation
- 13. Human Perception Detailedexperimental evidences has established that the 6 to 7 million cones in the human eye can be divided into three principal sensing categories, corresponding roughly to red, green and blue Approximately 65% of all cones are sensitive to Red Light, 33% are sensitive to Green Light and about 2% are sensitive to Blue Light (most sensitive)
- 14. Human Perception Dueto these absorption characteristic of Human Eye colors are seen as variable combinations of the so-called ‘Primary Colors’ Red, Green and Blue The primary colors can be added to produce secondary colors of Light Magenta (Red+Blue) Cyan (Green+Blue) Yellow (Red+Green)
- 15. Absorption of Lightby red, green and blue cones in Human Eye Mixing the three primaries or a secondary with its opposite primary colors in the right intensities produces white light
- 16. Primary Color ofLight vs Primary Color of Pigments Red, Green and Blue Colors are Primary Colors of Light In Primary Color of Pigments a primary color is defined as the one that subtracts or absorbs a primary color of Light and reflects or transmits the other two Therefore the Primary Colors of Pigments are Magenta, Cyan and Yellow and secondary colors are Red, Green and Blue A proper combination of three pigment primaries or a secondary with its opposite primary produces Black Color Television Reception is an example of the additive nature of Light Colors
- 18. Tri-Stimulus Values Theamount of Red, Green and Blue needed to form a particular color (denoted by X, Y and Z) A color is then specified by its “Tri-chromatic Coefficients” • Thus x+y+z=1
- 19. Chromaticity Diagram Anotherapproach for specifying colors is to use chromaticity diagram Shows color compositions as a function of x(red) and y(green) For any x and y the corresponding value of z(blue) can be obtained as z=1-x-y
- 20.
- 21. Chromaticity Diagram Todetermine the range of colors that can be obtained from the 3 given colors in the CD, we simply draw connecting lines to each of the three color points. The result is a triangle and any color inside a triangle is produced by various combinations of the three initial colors. The triangle shows a typical range of colors (called the color gamut) produced by RGB monitor
- 22. Color Models Thepurpose of a color model (also called Color Space or Color System) is to facilitate the specification of colors in some standard way A color model is a specification of a coordinate system and a subspace within that system where each color is represented by a single point Color Models RGB (Red, Green, Blue) CMY (Cyan, Magenta, Yellow) HSI (Hue, Saturation, Intensity) YIQ (Luminance,In phase, Quadrature) YUV (Y' stands for the luma component (the brightness) and U and V are the chrominance (color) components )
- 23. RGB Model Eachcolor is represented in its primary color components Red, Green and Blue This model is based on Cartesian Coordinate System
- 24. RGB Model Inthis model, the primary colors are red, green, and blue. It is an additive model, in which colors are produced by adding components, with white having all colors present and black being the absence of any color. This is the model used for active displays such as television and computer screens. The RGB model is usually represented by a unit cube with one corner located at the origin of a three-dimensional color coordinate system, the axes being labeled R, G, B, and having a range of values [0, 1]. The origin (0, 0, 0) is considered black and the diagonally opposite corner (1, 1, 1) is called white. The line joining black to white represents a gray scale and has equal components of R, G, B.
- 25. RGB Color Cube The total number of colors in a 24 Bit image is (28)3 =16,777,216 (> 16 million)
- 26.
- 27. CMY and CMYKColor Model Cyan, magenta, and yellow are the secondary colors with respect to the primary colors of red, green, and blue. However, in this subtractive model, they are the primary colors and red, green, and blue, are the secondaries. In this model, colors are formed by subtraction, where adding different pigments causes various colors not to be reflected and thus not to be seen. Here, white is the absence of colors, and black is the sum of all of them. This is generally the model used for printing. Most devices that deposit color pigments on paper (such as Color Printers and Copiers) requires CMY data input or perform RGB to CMY conversion internally C M Y R G B = 1.00 1.00 1.00 -
- 28. CMY and CMYKColor Model CMY is a Subtractive Color Model Equal amounts of Pigment primaries (Cyan, Magenta and Yellow) should produce Black In practice combining these colors for printing produces a “Muddy-Black” color So in order to produce “True-Black” a fourth color “Black” is added giving rise to CMYK model
- 29.
- 30.
- 31. HSI Color Model Hue (dominant colour seen) Wavelength of the pure colour observed in the signal. Distinguishes red, yellow, green, etc. More the 400 hues can be seen by the human eye. Saturation (degree of dilution) Inverse of the quantity of “white” present in the signal. A pure colour has 100% saturation, the white and grey have 0% saturation. Distinguishes red from pink, marine blue from royal blue, etc. About 20 saturation levels are visible per hue. Intensity Distinguishes the gray levels.
- 32. HSI Color Model Separates out intensity I from the coding Two values (Hue & Saturation) encode chromaticity Intensity encode monochrome part. Hue and saturation of colors respond closely to the way humans perceive color, and thus this model is suited for interactive manipulation of color images .
- 34. Properties of HSI(HSV) Hue H is defined by an angle Saturation S models the purity of the color I=(R+G+B)/3
- 35. Conversion from RGBto HSI Given an image in RGB color format, the H component of each RGB pixel is obtained using the equation:
- 36. Conversion from HSIto RGB
- 37. Conversion from HSIto RGB
- 38. Pseudo-Color (False Color)Image Processing Pseudo-color Image Processing consists of assigning colors to gray levels based on specific criterion Generally, the eye cannot distinguish more than about 50 gray levels in an image. Thus subtle detail can easily be lost in looking at gray scale images. To enhance variations in gray level and make them more obvious, gray scale images are frequently pseudo-colored, where each gray scale (generally at least 256 levels for most displays) are mapped to a color level through a LUT. The eye is extremely sensitive to color and can distinguish thousands of color values in a picture.
- 39. Pseudo-Coloring using LUT CLUT(Color lookup table):: A mapping of a pixel value to a color value shown on a display device. • For example, in a grayscale image with levels 0, 1, 2, 3, and 4, pseudocoloring is a color lookup table that maps 0 to black, 1 to red, 2 to green, 3 to blue, and 4 to white.
- 40. • The techniqueof intensity slicing or density slicing or color coding is one of the simplest example of Pseudo-color image processing Intensity Slicing
- 41. • The GrayScale [0,L-1] is divided into L levels; where l0 represents Black (f(x,y)=0) and lL-1 represents white (f(x,y)=L-1) • Suppose that P planes perpendicular to the intensity axis are defined at levels l1,l2…..,lp • Then assuming that 0<P<L-1 the P planes partition the gray scale into P+1 intervals, V1,V2…….Vp+1 Intensity Slicing
- 42. Intensity Slicing • Graylevel to color assignments are made according to the relation: f(x,y)= ck if f(x,y)€vk • Where ck is the color associated with the kth intensity interval vk defined by the partition planes at l=k-1 and l=k
- 43. An Alternative Viewof Intensity Slicing
- 46. Basics of FullColor Image Processing • Full color image processing fall into 2 categories. • In 1st category we process each component image individually and then form a composite processed color image from the individually processed component. • In 2nd category we work with color pixels directly. Because full color images have at least three components, color pixels are really vectors. • Let c represent an arbitrary vector in RGB color space:
- 47. Basics of FullColor Image Processing • Color components are the function of co-ordinates(x,y) so we can write it as: • For an image of size MxN there are MN such vectors, c(x,y), for x=0,1,2,…,M-1; y=0,1,2,…,N-1
- 48. Basics of FullColor Image Processing
- 49. Color Transformations • Colortransformation can be represented by the expression :: g(x,y)=T[f(x,y)] f(x,y): input image g(x,y): processed (output) image T[*]: an operator on f defined over neighborhood of (x,y). The pixel values here are triplets or quartets (i.e group of 3 or 4 values)
- 50. Color Transformations • Si=Ti(r1,r2,…,rn)i=1,2,3,….n ri and Si are variables denoting the color components of f(x,y) and g(x,y) at any point (x,y). n is the no of color components {T1,T2,…..,Tn} is a set of transformation or color mapping functions. • Note that n transformations combine to produce a single transformation T
- 51. Color Transformations • Thecolor space chosen determine the value of n. • If RGB color space is selected then n=3 & r1,r2,r3 denotes the red, blue and green components of the image. • If CMYK color space is selected then n=4 & r1,r2,r3,r4 denotes the cyan, hue, magenta and black components of the image. • Suppose we want to modify the intensity of the given image using g(x,y)=k*f(x,y) where 0<k<1
- 52. Color Transformations • InHSI color space this can be done with the simple transformation s3=k*r3 where s1=r1 and s2=r2 Only intensity component r3 is modified. • In RGB color space 3 components must be transformed: si=k*ri i=1,2,3. • Using k=0.7 the intensity of an image is decreased by 30%
- 53.
- 54. Color Complements • Thehues opposite to one another on the Color Circle are called Complements. • Color Complement transformation is equivalent to image negative in Grayscale images
- 55.
- 56. Color Slicing •Highlighting aspecific range of colors in an image is useful for separating objects from their surroundings. •Display the colors of interest so that they are distinguished from background. •One way to slice a color image is to map the color outside some range of interest to a non prominent neutral color.
- 57. Histogram Processing •Color imagesare composed of multiple components, however it is not suitable to process each plane independently in case of histogram equalization. This results in erroneous color. •A more logical approach is to spread the color intensities uniformly, leaving the colors themselves( hue, saturation) unchanged. •HSI approach is ideally suited to this type of approach.
- 58. Color Image Smoothing •Colorimages can be smoothed in the same way as gray scale images, the difference is that instead of scalar gray level values we must deal with component vectors of the following form: •The average of the RGB component vector in this neighborhood is:
- 59. Color Image Smoothing •Werecognize the components of this vector as the scalar images that would be obtained by independently smoothing each plane of the starting RGB image using conventional gray scale neighborhood processing. •Thus we conclude that smoothing by neighborhood averaging can be carried out on a per color plane basis.
- 60.
- 61.
- 62.
- 63. Noise in ColorImages •Noise in color images can be removed through various noise models which we use in Image Restoration in case the noise content of a color image has the same characteristics in each color channel. •But it is possible for color channels to be affected differently by noise so in this case noise are removed from the image by independently processing each plane •Remove noise by applying smoothing filters (e.g gaussian, average, median) to each plane individually and then combine the result.
- 64. Noise in ColorImages
- 65. Color Image Compression •Compression is the process of reducing or eliminating redundant and/or irrelevant information • A compressed image is not directly displayable it must be decompressed before input to a color monitor. •In case if in a compressed image 1 bit of data represents 230 bits of data in the original image, then compressed image could be transmitted over internet in 1 minute as compared to original image which will take 4 hours to transmit.
- 66. Discussion points 1. whatare the different color model and their application in computer graphics? 2.Describe the common practices that colors can be used in computer graphics? 3.Explain noise in image processing and how it can be eliminated?
- 67.