Concrete box culvert design and detailing (british)

CONCRETE CULVERT DESIGN AND
DETAILING MANUAL
Ministry
of
Transportation
QUALITY AND STANDARDS
TRANSPORTATION ENGINEERING BRANCH
BRIDGE OFFICE
ST. CATHARINES, ONTARIO
August, 2003
ISBN 0-7729-4279-X
© The Queen’s Printer of Ontario, 2000.
Reproduced with permission.

ISBN 0-7794-5308-5
© The Queen’s Printer for Ontario.
Reproduced with permission.
Although the contents of this manual have been checked no warranty, expressed or implied, is made by
the Ministry of Transportation as to the accuracy of the contents of this manual, nor shall the fact of
distribution constitute any such warranty, and no responsibility is assumed by the Ministry of
Transportation in any connection therewith. It is the responsibility of the user to verify its currency and
appropriateness for the use intended, to obtain the revisions, and to disregard obsolete or inapplicable
information.

To all users of the: CONCRETE CULVERT DESIGN AND DETAILING
MANUAL
Enquiries regarding the purchase and distribution of this manual should be directed to:
Publications Ontario
880 Bay Street
Toronto, Ontario
Canada, M7A 1N8
www.publications.gov.on.ca
Phone: 416 326 5300
800 668 9938
TTY: 800 268 7095
Fax: 613 566 2234
Enquires regarding amendments, suggestions or comments should be directed to:
Ministry of Transportation
Policy, Planning and Standards Division
Engineering Standards Branch
Bridge Office
2nd
Floor, 301 St. Paul Street
St. Catharines, Ontario
L2R 7R4
or
Phone: 905 704 2406
Fax: 905 704 2060

CONCRETE CULVERT DESIGN AND DETAILING MANUAL
2003 08 08 TABLE OF CONTENTS Page i
1 INTRODUCTION ......................................................................... 1
1.1 General ................................................................................... 1
1.2 Divisions ................................................................................... 1
1.3 Numbering System ...................................................................... 1
1.4 Existing Handbook and Drawings ................................................ 1
1.5 Distribution .................................................................................. 2
1.6 Revisions ................................................................................... 2
1.7 Standard Drawings ...................................................................... 2
2 DEFINITIONS .............................................................................. 3
3 NOTATION .................................................................................. 5
4 GENERAL INFORMATION ......................................................... 7
4.1 Introduction .................................................................................. 7
4.1.1 Scope ................................................................................... 7
4.1.2 Design Criteria ......................................................................... 7
4.1.3 Limitations ................................................................................ 7
4.2 Standard Concrete Culverts ........................................................ 8
4.2.1 Rigid Frame Concrete Culverts ................................................ 8
4.2.2 Non-Rigid Frame Concrete Culverts ........................................ 8
4.2.3 Fill Heights for Standard Culverts ............................................ 9
4.2.4 Culvert Extensions ................................................................... 9
4.2.5 Skewed End Culverts .............................................................. 9
4.2.6 Use of Culvert Header Walls .................................................... 10
4.2.7 Use of Culvert Apron Walls ...................................................... 10
4.2.8 Use of Retaining Walls ............................................................ 10
4.2.9 Use of Traversable Safety Grating ........................................... 10
4.3 Standard Drawings ...................................................................... 12
4.3.1 Professional Engineers Stamping ............................................ 12
4.3.2 Information to be Added to Standard Drawings ....................... 12
4.3.3 Scales for Added Details .......................................................... 13
4.4 Designation of Reinforcing Steel ................................................. 13
4.4.1 Reinforcing Steel Schedule ...................................................... 15
4.5 Contract Preparation System .......................................................... 15
5 RIGID FRAME OPEN FOOTING CULVERTS ............................ 16
5.1 Culvert Dimensions and Reinforcement ...................................... 16
5.2 Footing Design ............................................................................ 19
5.2.1 General Information ................................................................. 19
5.2.2 Calculation of Bearing Pressure .............................................. 20
5.2.3 Determination of Lateral Sliding Resistance ............................ 20
5.2.4 Modification of Footing Concrete Quantities ............................ 21
5.2.5 Modification of Footing Steel Quantities .................................. 21

2003 08 08 TABLE OF CONTENTS Page ii
5.3 Detailing of Open Footing Culvert Drawings ................................ 23
5.3.1 Details for Standard Drawings ................................................. 23
5.3.2 Steel Table for Culvert ............................................................. 25
5.3.3 Steel Table for Header Wall ..................................................... 25
5.3.4 Adjustment of Concrete Quantities .......................................... 25
5.3.5 Quantity Tables ........................................................................ 26
5.4 Detailing Tables ........................................................................... 27
6 RIGID FRAME BOX CULVERTS ................................................ 73
6.2 Foundation Investigation ................................................................. 73
6.3 Detailing of Box Culvert Drawings ............................................... 76
6.3.3 Steel Table for Apron Wall and Header Wall ........................... 78
6.3.5 Quantity Tables ........................................................................ 78
6.4 Detailing Tables ........................................................................... 79
7 NON-RIGID FRAME BOX CULVERTS ....................................... 125
7.1 General ................................................................................... 125
7.3 Detailing of Box Culvert Drawings ............................................... 128
7.3.3 Steel Table for Apron Wall ....................................................... 129
7.3.5 Quantity Table ......................................................................... 129
7.4 Detailing Table ............................................................................ 130
8 CULVERT DETAILS ................................................................... 131
8.1 Reinforcing Steel Details ............................................................. 131
8.1.1 Vertical and Transverse Bars ................................................... 131
8.1.2 Longitudinal Bars ..................................................................... 131
8.1.3 Reinforcing Steel Quantity Adjustment for R and W Bars ........ 132
8.2 Apron Walls ................................................................................. 133
8.2.1 Details of Apron Walls ............................................................. 133
8.2.2 Concrete Quantity for Apron Wall ............................................ 133
8.2.3 Reinforcing Steel Quantity for Apron Wall ............................... 134
8.3 Header Walls ............................................................................... 135
8.3.1 Details of Header Walls ........................................................... 135
8.3.2 Concrete Quantity for Header Wall .......................................... 135
8.3.3 Reinforcing Steel Quantity for Header Wall ............................. 136

2003 03 14 TABLE OF CONTENTS Page iii
8.4 Skewed End Culverts .................................................................. 139
8.4.1 Details of Skewed End Culverts ............................................... 139
8.4.2 Concrete Quantity Adjustment for Skewed End Culverts ......... 139
8.4.3 Reinforcing Steel Quantity Adjustment for Skewed End
Culverts ................................................................................... 139
8.4.4 Extension of Culverts ............................................................... 142
8.5 Intersecting Drains, Catch Basins or Manholes ........................... 143
8.5.1 Hole Diameter or Side Dimension Not Exceeding 300mm ...... 144
8.5.2 Holes 301mm to 760mm Diameter or Rectangular Holes with
301mm to 600mm Side Dimension .......................................... 145
8.6 Retaining Walls for Culverts ........................................................ 147
8.6.1 General ................................................................................... 147
8.6.2 Plan View of Culvert with Retaining Wall ................................. 148
8.6.3 Modification of Culvert to Suit Retaining Walls ........................ 149
8.6.4 Retaining Wall Details .............................................................. 153
8.7 Special Treatment of Culvert Ends .............................................. 158
9 APPENDIX .................................................................................. 161
9.1 Appendix A: Half-Size Prints of Standard Drawings .................... 162
9.2 Appendix B: Reduced Print of Design Data Form for Concrete
Culverts .................................................................. 166
9.3 Appendix C: Deviations From CHBDC ........................................ 168
9.4 Appendix D: Material and Construction Specifications for Precast
Reinforced Concrete Box Culverts and Box
Sewers .................................................................... 169
9.5 Appendix E: Methodology Used for Rigid Frame Culvert
Design .................................................................... 170
INDEX ................................................................................... 175

DETAILING MANUAL
DIVISION 1 – INTRODUCTION
August 2003

2003 03 14 INTRODUCTION Page 1
1 INTRODUCTION
1.1 GENERAL
The Concrete Culvert Design and Detailing Manual have been prepared to
facilitate the design and detailing of standard rectangular concrete
culverts.
1.2 DIVISIONS
This Manual is divided up into the following divisions:
Division 1 Introduction
Division 2 Definitions
Division 3 Notation
Division 4 General Information
Division 5 Rigid Frame Open Footing Culverts
Division 6 Rigid Frame Box Culverts
Division 7 Non-Rigid Frame Box Culverts
Division 8 Culvert Details
Division 9 Appendix
1.3 NUMBERING SYSTEM
Within each of the above-described divisions, the material is subdivided
into sections and subsections. The standard drawings corresponding to
the various divisions are numbered independently of the Manual's
numbering system.
1.4 EXISTING HANDBOOK AND DRAWINGS
This Manual supersedes the 1988 edition of the Concrete Culvert Design
and Detailing Manual.

2003 03 14 INTRODUCTION Page 2
1.5 DISTRIBUTION
Copies of the Manual and revisions may be obtained from:
Ronen Publishing House, Inc.
505 Consumers Road, Suite 910
Toronto, Ontario
M2J 4V8
Tel: 1-800-856-2196
Fax: 1-800-870-7239
1.6 REVISIONS
When additions or revisions are necessary, they will be made available
through Ronen Publishing House, Inc., as detailed in Section 1.5. The
date shown at top left corner of each page indicates the date of (re)issue.
1.7 STANDARD DRAWINGS
Electronic CAD files containing standard drawings in AutoCAD may be
obtained from Ronen Publishing House Inc. The latest revision date will be
that available from Ronen House.

DETAILING MANUAL
DIVISION 2 – DEFINITIONS
August 2003

2003 03 14 DEFINITIONS Page 3
2 DEFINITIONS
Apron Wall - Also known as a cutoff wall; a vertical non-structural
concrete wall built across the full width of the ends of box culverts and
extending below the level of the bottom slab.
Bar Mass - The mass of a reinforcing bar per unit length (kg/m).
Bearing Capacity - The maximum load that can be applied to a soil at the
respective limit state.
Box Culvert - A culvert in the shape of an enclosed rectangle and
consisting of a bottom slab, two wall elements and a top slab.
Culvert Extension - A portion of a culvert built beyond the limits of a
previously existing culvert.
Designer - Individual(s) designated by the Structural Engineer to use this
manual to design and detail culverts.
Fill Height - The vertical distance from the top of the top slab of a culvert
to the riding surface of the roadway above it.
Geotechnical Engineer - A licensed professional engineer designated a
specialist in the soils or geotechnical field.
Haunch - The increase in thickness of a culvert's walls or slabs at the
corners.
Header Wall - A vertical concrete wall across the full width of the ends of
a culvert and extending upwards from the level of the top slab.
Height - For box culverts this is the vertical distance measured from the
top of the bottom slab to the bottom of the top slab at mid-span. For open
footing culverts this is the vertical distance measured from the level of the
top of the footings to the bottom of the top slab at mid-span.
Length - The length of a culvert is the distance between the ends, along
the longitudinal axis of the culvert.
Longitudinal Axis - The longitudinal axis of a culvert is located at the
geometric centroid of the culvert cross-section and is parallel to the walls
of the culvert.

2003 03 14 DEFINITIONS Page 4
Non-Rigid Frame Culvert - A non-rigid frame culvert is one detailed so
that there is no intended transfer of bending moment between wall and
slab elements.
Open Footing Culvert - A culvert in the shape of an open rectangle,
consisting of two wall elements supported on footings and a top slab. Note
that there is no bottom slab.
Retaining Wall - A retaining wall for the purpose of this Manual is an
earth retaining structure consisting of a vertical stem element supported
by a horizontal footing element and built of reinforced concrete.
Rigid Frame Culvert - A rigid frame culvert is one detailed so that full
continuity of bending moment is assured between the wall and slab
elements.
Set - A set of longitudinal reinforcing bars refers to the placement of a
reinforcing bar in a specific location on a cross-section.
Skew Angle - The skew angle is the angle between the centreline of the
highway and a line perpendicular to the longitudinal axis of the culvert.
Skew Number - The skew number is the angle between the centreline of
the highway and the longitudinal axis of the culvert, measured clockwise.
Skewed End Culvert - A skewed end culvert is one with ends not at a
right angle to the longitudinal axis of the culvert. Usually the ends are built
at right angles to the longitudinal axis of the culvert.
Span - The span of a culvert is the minimum horizontal distance
measured between the inside faces of the walls.
Standard Culvert - A culvert detailed in accordance with this Manual.
Structural Engineer - A licensed professional engineer of Ontario
specializing in structural design.
Strut - A member placed between the footings of an open footing culvert.
Traversable Grate - A safety grating over the open tapered ends of
concrete culverts that do not have traffic protection.

DETAILING MANUAL
DIVISION 3 – NOTATION
August 2003

2003 08 08 NOTATION Page 5
3 NOTATION
A’ the effective contact area of a footing, square metres
a a detailing dimension for culverts with skewed ends, mm
B thickness of the bottom slab of a box culvert, mm
b spacing between adjacent bars as per detailing tables, mm
C a coefficient used in the determination of reinforcing bar
quantities.
CANBAS Canadian Bridge Analysis System
c’ the effective cohesion between the base of the footing and
the soil at the ULS, as per CHBDC. kPa
CHBDC Canadian Highway Bridge Design Code, 2000 Edition
CGSB Canadian General Standards Board
F width of footing for open footing culverts, mm
F1 a reinforcing bar spacing factor, mm-1
HULS maximum factored horizontal reaction at the level of the base
of the footing at the ULS, kN
Lc culvert length measured along the longitudinal axis, m
OCPA Ontario Concrete Pipe Association
OMBAS Ontario Modular Bridge Analysis System
OPSS Ontario Provincial Standard Specifications
S culvert span measured perpendicular to the longitudinal axis
of the culvert, mm
SLS serviceability limit states, as per CHBDC
T thickness of top slab of culvert, mm

2003 08 08 NOTATION Page 6
tan φ’ effective friction coefficient for concrete cast against soil.
ULS ultimate limit states, as per CHBDC
V unfactored vertical reaction due to the dead load of cast-in-
place concrete and soil fill, at the level of the base of the
footing, kN
VSLS maximum vertical reaction at the level of the base of the
footing at SLS, kN
VULS maximum factored vertical reaction at the level of the base of
the footing at ULS, kN
W thickness of wall of culvert, mm
γ the acute angle between the normal to the longitudinal axis
and the end of the same culvert, degrees
φ’ the effective angle of internal friction, as per CHBDC, degrees
θ skew angle of culvert, degrees

2003 03 14 GENERAL INFORMATION Page 7
4 GENERAL INFORMATION
4.1 INTRODUCTION
4.1.1 SCOPE
This Manual contains all data necessary to complete the standard
drawings and quantities for concrete box and open footing culverts that fall
within the size range of "Standard Concrete Culverts" specified in Sections
4.2.1 and 4.2.2. Data is also provided to permit the detailing of:
i. Simple retaining walls for use with these culverts.
ii. Intersecting drains, catch basins and manholes.
iii. Culverts with skewed ends.
The Manual provides quantities per unit length of culvert but no data is
provided for the calculation of extra quantities for footings, apron and
header walls or for retaining walls. Concrete quantities are in cubic
metres and steel quantities are in kilograms. Provision is made on the
drawings for inserting a breakdown of quantities for progress payment
purposes. The Designer must compute these quantities.
4.1.2 DESIGN CRITERIA
Design and detailing data contained in this Manual conforms to the
requirements of the 2000 edition of the Canadian Highway Bridge Design
Code with the exception of the criteria listed in the Appendix. Calculations
are based on 30 MPa concrete and grade 400 reinforcing steel.
4.1.3 LIMITATIONS
The following topics are considered to be beyond the scope of this
Manual:
i. Selection of culvert type and size, and all information usually
shown on form PH-D-353, or DB-RD-77 or “Design Data Form
for Concrete Culverts”.
ii. Culverts with less than 0.6 m fill (require special attention).
iii. Culverts with skew angle exceeding 25°.

DETAILING MANUAL
DIVISION 4 – GENERAL INFORMATION
August 2003

iv. Hydrological considerations and selection of type and extent of
end treatment.
v. Granular backfill requirements.
vi. Bedding requirements for box culverts.
vii. Future deepening of municipal drains.
viii. Precast concrete box culverts (See Appendix D).
ix. Pipe culverts.
4.2 STANDARD CONCRETE CULVERTS
4.2.1 RIGID FRAME CONCRETE CULVERTS
Standard rigid frame culverts are rectangular single cell cast-in-place
concrete culverts (open footing or box) which conform to the dimensions
specified in Table 4-2, have fill heights as specified in Section 4.2.3, and
have skew angles not exceeding 25 degrees.
Note that the spans are in increments of 0.5 metres and the heights are in
increments of 0.25 and 0.5 metres. Spans and heights which fall between
these increments are not standard and should be rounded up to the
nearest standard value.
4.2.2 NON-RIGID FRAME CONCRETE CULVERTS
Details for smaller box culverts of the non-rigid frame type are included in
this package. These culverts comprise the following sizes (in metres):
Span Height
1.25 x 1.25
1.50 x 1.25
1.50 x 1.50
Concrete culverts with spans less than 1.25 metres or heights less than
1.25 metres are impracticable due to the difficulty in removing interior
forms and falsework.

4.2.3 FILL HEIGHTS FOR STANDARD CULVERTS
Rigid frame culverts described in this Manual are designed for fill heights
ranging from 0.6 to 6.0 metres. Non-rigid frame culverts are designed for
fill heights ranging from 0.6 to 5.0 metres.
Culverts with fill heights between 0.6 and 1.0 metre shall be designed for
0.6 metres of fill. With this exception, all culverts for which the fill height
does not correspond to the listed fill heights shall be designed for the next
highest listed fill height.
Culverts with less than 0.6 or more than 6.0 metres of fill are not covered
by this Manual.
For cast-in-place culverts with less than 0.6 m fill, the use of a distribution
slab is not mandatory. However, if no distribution slab is provided, the
culvert will have to be structurally designed for the effect of direct wheel
load, and the required concrete cover will have to reflect the applicable
environmental exposure from Section 8 of the CHBDC.
For precast culverts with less than 0.6 m of fill, a reinforced distribution
slab is required to provide an improved live load shear transfer between
the units, as well as an enhanced live load distribution.
Detailing tables are provided for each type of culvert, giving all necessary
design and detailing information for the listed height of fill.
4.2.4 CULVERT EXTENSIONS
Culvert extensions may be detailed using this Manual provided
modifications are made to the standard drawings and to the detailing
procedures described in Divisions 5, 6, 7 and 8 and as specified in
Section 8.4.4.
4.2.5 SKEWED END CULVERTS
Ends of culverts may be skewed to permit a reduction in total length; for
extensions, to accommodate existing skewed end culverts; or to suit
geometric constraints or other reasons.

4.2.6 USE OF CULVERT HEADER WALLS
Header walls shall be provided only when one or more of the following
criteria apply:
i. When the culvert has retaining walls, header walls are
recommended to allow a further reduction in culvert length.
(Note, where recovery distance requirements dictate the culvert
length, this further reduction in length may not be desirable).
ii. When a skewed end culvert has a skew angle greater than 15°.
iii. When the skew angle of an existing culvert is greater than 15° a
header wall may be provided on top of the top slab and below the
bottom slab of the extension at the end abutting the existing
culvert, as prescribed in Section 8.4.4.
Header wall details are described in Division 8.
4.2.7 USE OF CULVERT APRON WALLS
Apron walls are to be added at the ends of all box culverts and shall be
detailed as shown in Division 8.
4.2.8 USE OF RETAINING WALLS
Retaining walls may be built at the ends of culverts to reduce the total
length of culvert, for hydraulic considerations, or for other reasons.
Retaining wall details are described in Division 8.
4.2.9 USE OF TRAVERSABLE SAFETY GRATING
Concrete culverts that have tapered ends that match the slope of the
roadway fill, and have no traffic protection around them shall be equipped
with the traversable safety grating. Contact the Ministry for the relevant
Special Provision and standard drawing on the requirement of such
grating. Refer to further details in Section 8.7.

TABLE 4-2
STANDARD RIGID FRAME BOX AND OPEN FOOTING CULVERT SIZES
CULVERT
HEIGHT
(m)
CULVERT SPAN (m)
2.0
1.25
2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0
1.50
1.75
2.00
2.50
3.00
3.50
4.00
STANDARD
SIZES
NOTE: Range of fill heights are 0.6, 1.0, 1.5, 2.0, 2.5, 3.0, 4.0, 5.0 and
6.0 metres.

4.3 STANDARD DRAWINGS
The following standard drawings are used for detailing standard culverts:
SS114-1 Rigid Frame Open Footing Culvert.
SS114-2 Rigid Frame Box Culvert.
SS114-3 Non-Rigid Frame Box Culvert.
4.3.1 PROFESSIONAL ENGINEERS STAMPING
Standard drawings shall be reviewed together with the corresponding text
in the Manual to determine what information, if any, needs to be added to
them.
Where information in tables and dimensions are added to standard
drawings for their completion, the drawings shall bear the seal, date
and signature of a Professional Engineer. This Engineer accepts full
responsibility for the accuracy of the added information only.
Where engineering design changes are made on standard drawings
that affect the original design, these drawings shall be identified as
“Modified” and bear the seals, dates and signatures of two
Professional Engineers. These Engineers accept full responsibility
for the design that results from these changes.
4.3.2 INFORMATION TO BE ADDED TO STANDARD DRAWINGS
When the culvert is without skewed ends, retaining walls, or openings in
walls or slabs, all information necessary to complete the drawings is
available directly from the detailing tables and from “Design Data Form for
Concrete Culverts”.
The following special information must be added to the drawings when a
culvert has skewed ends, retaining walls or openings in walls or slabs:
- Plan view of the culvert showing location of applicable features.
- Details of steel arrangement at skewed ends.
- Header wall length and steel arrangement at skewed ends.
- Apron wall length and steel arrangement for box culverts with
skewed ends.

- Retaining wall dimensions and reinforcing steel.
- Steel table for retaining walls.
- Details of reinforcement at openings.
- Steel table for such reinforcement.
4.3.3 SCALES FOR ADDED DETAILS
The selection of scales for details to be added to drawings (as specified in
Section 4.3.1 above) is important, since the drawings will be reduced for
inclusion in the contract documents.
The plan view of the culvert should normally be drawn at 1:50 scale when
many additional details are required (e.g. for skewed end culvert with
retaining walls).
All details should be drawn to a sufficiently large scale to ensure legibility
after reduction to contract size.
4.4 DESIGNATION OF REINFORCING STEEL
The standard notation for designating reinforcing steel bars has been
adopted to maintain a degree of uniformity with bridges or other concrete
structures that may be included in the same contract as concrete culverts.
The system uses one alphabetical character followed by five numerical
characters e.g. P15001.
The alphabetical character indicates the part of the culvert where the bar
is located as follows:
H - transverse bar, outside face, top and bottom slab.
J - vertical/transverse bar, outside face, walls and slabs, alternating
with K bar.
K - vertical/transverse bar, outside face, walls and slabs, alternating
with J bar.
P - transverse bar, inside face, top slab.
Q – transverse bar, inside face, bottom slab.

R - longitudinal bar, walls and slabs.
S - vertical/transverse bar, inside face, bottom haunch (rigid frame
box culvert), or,
S - transverse bar, footing (rigid frame open footing culvert).
T - vertical bar, inside face, walls
U - vertical/transverse bar, inside face, top haunch
V - vertical bar, footing
W - longitudinal bar, footing
L - apron wall
M - apron wall
Y - header wall
Z - header wall
The first two numerical characters denote the size of the bar.
e.g. P 15001 is a size 15 bar
Q 20001 is a size 20 bar
The remaining three numerical characters are for use as bar mark
numbers so that up to 999 different bars could be used with the same
alphabetical character.
The culverts in this book are detailed so that there is generally only one
bar type for each alphabetical character with the final three characters
001; however bars in retaining wall systems or around apertures may
have several mark numbers.
The character N is used for bars specifically added to reinforce apertures
in culvert walls or slabs.
The letters A to G should be used for designating steel for retaining walls.
The letters I, O and X shall not be used for designating reinforcing bars.

4.4.1 REINFORCING STEEL SCHEDULE
Section 12.2.1 of the Structural Manual describes when separate
computerized reinforcing steel schedules are required for culverts.
4.5 CONTRACT PREPARATION SYSTEM
Capital construction contract tender documents are produced for the
ministry by using the Contract Preparation System (CPS). This is an
integrated application facility for the preparation of tender item documents,
item quantity sheets, modified and fill-in special provisions, etc., for road
design, structural and electrical work.
The designer should be aware of the main tender items and associated
specifications shown in Table 4.5 that are to be used, where applicable, in
conjunction with concrete culverts.
OPSS SPEC. No. CPS ITEM UNIT
902 Earth Excavation for Structure cubic metre
902 Rock Excavation for Structure cubic metre
902 Unwatering Structure Excavation lump sum
902 Clay Seal lump sum
904 Concrete in Culverts cubic metre
905 Reinforcing Steel Bar lump sum
314 Granular B, Type I tonne
314 Granular B, Type II tonne
539 Roadway Protection lump sum
539 Track Protection lump sum
TABLE 4.5 – CPS ITEMS FOR CONCRETE CULVERTS
Guidance on estimating quantities and other information on the above
tender items may be found in the ministry’s manuals “Contract Design,
Estimating and Documentation” (CDED) Volumes I and II.

DETAILING MANUAL
DIVISION 5 – RIGID FRAME OPEN FOOTING CULVERTS
August 2003

2003 03 14 RIGID FRAME OPEN FOOTING CULVERTS Page 16
5 RIGID FRAME OPEN FOOTING CULVERTS
5.1 CULVERT DIMENSIONS AND REINFORCEMENT
Dimensions and detailing information for standard rigid frame open footing
culverts is given in Figure 5.1(a). Construction joints indicated are optional
and are provided for the contractor's convenience. Note that both the
height and width of the haunches are equal to the thickness of the top slab
of the culvert. The standard footing depth is shown as 1.2 metres, the
minimum for frost protection in Ontario. Culverts to be founded on piles
are beyond the scope of this Manual.
Figure 5.1(b) details the layout of the reinforcing steel for standard rigid
frame open footing culverts. Table 5-1 identifies the various bar sizes and
shapes used for this type of culvert.
The detailing tables at the end of the division should be read in
conjunction with Figures 5.1(a) and (b) and Table 5-1.
Details of header walls and retaining walls are provided in Division 8.
The design assumption and parameters, as well as the load cases and
combinations, as per CHBDC are summarized in Appendix E
(Section 9.5).

T
CONSTRUCTION
JOINT (TYP)
SPAN
W
HEIGHT
T
T
F
D=1200
FIGURE 5.1(a) RIGID FRAME OPEN FOOTING CULVERT DIMENSIONS
FIGURE 5.1(b) RIGID FRAME OPEN FOOTING CULVERT REINFORCEMENT
R Bars @ 300
R Bars @ 300 H Bars
J & K Bars
Alternating
U Bars @ 300
T Bars
S Bars @ 300
V Bars Lap
With T Bars
V Bars
Lap With
J & K
Bars
R
Bars
@
300

TABLE 5-1 REINFORCING STEEL IDENTIFICATION
B
D*
R = RADIUS
C 45°
45°
180
180
1780 mm*
B
230
190
225
C*
P BARS STRAIGHT BOTTOM OF TOP SLAB
STAGGERED
H BARS STRAIGHT
TOP OF TOP SLAB
15M BARS
J & K BARS J BARS ALTERNATE WITH K BARS
T BARS STRAIGHT INSIDE FACE OF WALLS
U BARS 15M BARS
HAUNCH
R BARS STRAIGHT
LONGITUDINAL
15M BARS
V BARS
FOOTING DOWELS
20M BARS
TOP OF FOOTING
15M BARS
STRAIGHT
S BARS
LONGITUDINAL IN FOOTING
20M BARS
STRAIGHT
W BARS
Y BARS STRAIGHT HEADER WALL
HEADER WALL
15M BARS
Z BARS
MARK DETAILS REMARKS
NOTE: -All dimensions shown to centreline of bar.
-* represents vertical dimension

5.2 FOOTING DESIGN
5.2.1 GENERAL INFORMATION
A foundation investigation is generally necessary for culvert design and
documentation in the contract for culvert construction purposes.
Foundation information such as subsurface conditions, soil strength
parameters, settlement limitations, and any dewatering and shoring
requirements will be needed. In addition, information will be useful for the
contractor to plan his work and as a baseline in the event of any
construction disputes. The need and the level of detail required for the
foundation investigation shall be determined by the designer and should
be based on:
(a) the complexity and the importance of the culvert, and
(b) the data currently available for the foundation material.
It is important to realize that the footing width shown on the detailing
tables is the minimum width compatible with the wall thickness of the
culvert. It does not take into account any geotechnical considerations.
The detailing tables also list four values of footing reactions per metre of
culvert: maximum factored vertical reactions at the footing level for the
ultimate limit state and serviceability limit state, (VULS and VSLS); maximum
factored horizontal reaction at the footing level for the ultimate limit state
(HULS) and the unfactored vertical reaction due to the dead load of cast-in-
place concrete and soil fill at the footing level (V). The maximum vertical
reactions are intended for use in calculating the maximum bearing
pressures for the relevant limit states. The maximum factored horizontal
reaction and unfactored vertical reaction are provided in order that the
lateral sliding resistance of the footing can be checked.
If the bearing capacity of the founding soil is not exceeded by using the
footing widths shown on the detailing tables and if the lateral sliding
stability of the footing has been checked, then the geotechnical
considerations are deemed to have been satisfied and the tabulated
footing width is adequate.
If the bearing capacities are exceeded or lateral sliding stability is not
assured, then the Geotechnical Engineer and the Structural Engineer shall
be consulted.
IN ANY CASE, rigid frame open footing culverts should only be used
when the foundation conditions are such so as to permit the use of the
minimum footing width, or very close to it.

5.2.2 CALCULATION OF BEARING PRESSURE
The maximum applied factored pressure at the ultimate limit state is:
MAXIMUM FACTORED VERTICAL REACTION @ULS, kN
FOOTING AREA, square metres
and must not exceed the factored bearing capacity at the ultimate limit
state.
The maximum applied bearing pressure at the serviceability limit state, is:
MAXIMUM VERTICAL REACTION @ SLS, kN
FOOTING AREA, square metres
and must not exceed the bearing capacity at this limit state.
5.2.3 DETERMINATION OF LATERAL SLIDING RESISTANCE
For cast-in-place rigid frame open footing culverts, the designer must
check for the possibility of a sliding failure in the soil. The following
expression may be used:
0.8 A' c‘+ 0.8 V tan φ' ≥HULS
Values of the parameters c‘ and tan φ’ for the culvert site can be found in
the foundation report or from the Geotechnical Engineer.
For those cases where a check of the lateral sliding stability of the footings
is not satisfied, several options are available. Depending on the
structure’s characteristics and site conditions, one of the following options
may be utilized:
i. The open footing culvert may be replaced with a box culvert or
bridge.
ii. The designer may design and detail reinforced concrete "struts"
to be placed at regular intervals along the full length of the culvert
and spanning the full distance between its footings.

iii. Given that it has been determined that the footings will slide,
analyze the structure to see how much horizontal movement
takes place at the base of the footing. From this, calculate the
additional moments induced into the culvert, and provide
reinforcement sufficient for the Total moment in each member of
the culvert structure.
5.2.4 MODIFICATION OF FOOTING CONCRETE QUANTITIES
The concrete quantities given in the detailing tables are based on the
minimum footing dimensions. If the minimum footing width and depth is
used, then these quantities are correct. If the footing must be enlarged,
then the quantities given in the tables must be adjusted in proportion to
the new footing dimensions.
The additional volume of concrete required to construct the four 100 mm
lips at the ends of the footings of an open footing culvert must be
determined and added to the total volume of footing concrete. This volume
must be based on the actual footing dimensions.
5.2.5 MODIFICATION OF FOOTING STEEL QUANTITIES
The steel quantities given in the detailing tables are based on the
minimum footing dimensions. If the minimum footing width and depth is
used, then these quantities are correct. If the footings are made larger,
then the quantities must be increased. In the following expressions,
footing dimensions and bar spacing are in millimeters. The resulting
quantities are in kilograms per metre of culvert length.
(a) Additional Steel for Widened Footings
The horizontal leg of each V bar must be lengthened by an amount equal
to half the increase in footing width. Therefore, the total additional quantity
of V type bars for widened footings is:
1.570 x (INCREASE IN FOOTING WIDTH) x F1

where,
The length of the S bar must be increased by an amount equal to the
increase in footing width, hence the total additional quantity of S bars is:
0.011 X (INCREASE IN FOOTING WIDTH)
(b) Additional Steel for Deepened Footings
When a footing is deepened, the vertical leg of each V bar must be
lengthened by an amount equal to the increase in footing depth. In this
case the total additional quantity of V type reinforcement for a deepened
footing is:
3.140 X (INCREASE IN FOOTING DEPTH) X F1
F =
1
EXTERIOR V BAR SPACING
+
INTERIOR V BAR SPACING

5.3 DETAILING OF OPEN FOOTING CULVERT DRAWINGS
5.3.1 DETAILS FOR STANDARD DRAWINGS
The following is a suggested procedure for completing the drawing for
standard rigid frame open footing culverts, SS114-1, with no skewed end,
retaining walls or other special features:
- Obtain culvert size, length, and height of fill from “Design Data
Form for Concrete Culverts”.
- Select appropriate standard drawing for rigid frame open footing
culvert.
- Determine from “Design Data Form for Concrete Culverts”
whether culvert is an extension or not:
If culvert is an extension, change vertical centreline on left
side of section detail 1 to a solid line and label - "END OF
EXISTING CULVERT".
Insert length of culvert extension on the horizontal
dimension line:
e.g. 16 m EXTN RT
17 m EXTN LT
If culvert is not an extension, label centreline "Centre-Line
Highway" and add culvert length each side of Centre-Line
Highway.
e.g. 16 m RT
17 m LT
- Select from Division 5 appropriate detailing table for required size
of culvert.
- Insert span and height of culvert and dimensions of top slab,
haunch and wall on "Typical Culvert Section" detail.
- Determine maximum soil bearing pressure as per Section 5.2.
- Determine footing width required and insert footing dimensions
on "Typical Culvert Section" detail. The dimension showing the
footing projection may be found from the following expression:

FOOTING WIDTH – WALL THICKNESS
2
- Insert bar size and/or spacing for H, J, K and P bars where
required on all details. Note that P bar spacing is at mid-span.
Insert spacing for V bars. Insert Y bar size on Detail B.
- Insert bar size and spacing for T bars.
- Insert dimensions on Detail 2 for layout of P bars, noting that
smaller dimension is half of the wall thickness and larger
dimension is P bar length.
- Add additional P bar at each end of culvert where no header wall
is required.
- Add header walls where required as specified in Sections 4.2.6.
WARNING NOTE: a dimension is required on Detail 1 to show the
actual distance between any J bar and the adjacent K bar. This is
necessary to avoid confusion about the spacing of alternating bars,
since the space between adjacent bars is 1/2 of the J spacing.
i.e., if J bar spacing is 300 mm and
K bar spacing is 300 mm
then distance between adjacent bars is 150 mm.
THIS IS AN EXTREMELY IMPORTANT POINT.
- Complete steel bar table for culvert and for header wall.
- Multiply unit quantities by culvert length.
- Calculate modifications to steel and concrete quantities required
if actual footing size exceeds minimum footing size and modify
unit quantities given.
- Add adjustment to steel quantity for R and W bar laps.

- Add adjustment to footing concrete quantity for 100 mm lip at
each end of footings.
- Add header wall quantities where applicable.
- Insert total quantities in “Culvert Quantities” table on standard
drawings.
- The Standard Drawing shall be sealed, dated and signed
according to 4.3.1.
5.3.2 STEEL TABLE FOR CULVERT
Spacing, bar length, and bar bending dimensions are available from the
culvert detailing tables located at the end of this division.
Numbers of H, J, K, P, S, T, U and V bars required can be calculated as
per Division 8. This procedure considers only one bar per cross-section;
therefore for J, K, S, T, U and V bars, numbers given must be multiplied
by 2.
Exterior face V bars lap with J bars. For culverts less than or equal to 2
metres high and, if J bar spacing exceeds 400 mm, then exterior face V
bars lap with both J and K bars. Interior face V bars lap with T bars.
For R bars the number of sets of bars is available from the detail tables;
the number of bars per set and bar length are as given in Division 8.
For W bars the number of sets are always 12 (6 per footing) regardless of
the footing width. The bar length and number of bars per set are found as
described in Division 8.
5.3.3 STEEL TABLE FOR HEADER WALL
Length and number of Y bars required and number of Z bars required
are as given in Division 8.
Modification of these quantities is required for skewed end culverts.
5.3.4 ADJUSTMENT OF CONCRETE QUANTITIES
The additional volume of concrete required for header walls is described
in Division 8.
Modification of these quantities is required for skewed end culverts.

5.3.5 QUANTITY TABLE
Complete the quantity table. Concrete and steel quantities should be total
quantities for complete length of culvert including header wall, where
applicable.

5.4 DETAILING TABLES
The following pages contain the detailing tables. These tables list various
culvert dimensions; concrete and reinforcing steel quantities, and
reinforcing steel detailing information.
All dimensions, spacings and lengths given are in millimetres.
Steel quantities given are in kilograms, per metre length of culvert.
Concrete quantities given are in cubic metres, per metre length of culvert.

DETAILING TABLE SPAN: 2.00
DIMENSIONS & QUANTITIES HEIGHT: 1.25
* - The designer must check the resistance to SLIDING, according to Section 5.2.3 of this Manual.
FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 210 210 210 210 210 210 210 220 220
T 210 210 210 210 210 210 210 220 220
F 500 500 500 500 500 500 500 500 500
QUANTITIES STEEL 211.4 196.8 195.4 197.6 204.4 216.6 237.8 254.9 276.8
CONC. 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3
FOOTING V ULS 137.7 122.7 120.1 127.9 138.3 152.3 184.6 222.4 258
REACTION V SLS 86.1 82.2 85.8 94.9 105.4 117.8 144.9 175.7 204.7
* H ULS 46.1 46.6 50.2 54.7 59.7 65 75.8 86.9 98.1
V 46 57 72 86 101 115 145 175 204
P BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 300 400 425 425 425 375 300 275 225
LENGTH 2210 2210 2210 2210 2210 2210 2210 2220 2220
H BARS C/C - - - - - - - - -
LENGTH - - - - - - - - -
J BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 550 630 630 625 575 525 425 375 325
LENGTH 3080 2950 2890 2890 2890 2890 2890 2910 2910
B 1610 1480 1420 1420 1420 1420 1420 1420 1420
D 1250 1250 1250 1250 1250 1250 1250 1250 1250
R 140 140 140 140 140 140 140 150 150
K BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 550 630 630 625 575 525 425 375 325
LENGTH 2650 2520 2420 2360 2310 2280 2250 2260 2240
B 1180 1050 950 890 840 810 780 770 750
D 1250 1250 1250 1250 1250 1250 1250 1250 1250
R 140 140 140 140 140 140 140 150 150
U BARS LENGTH 910 910 910 910 910 910 910 960 960
C 550 550 550 550 550 550 550 600 600
T BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 400 425 425 400 375 325 300 275 250
LENGTH 1250 1250 1250 1250 1250 1250 1250 1250 1250
R BARS # SETS 37 37 37 37 37 37 37 37 37
V BARS LENGTH 1995 1995 1995 1995 1995 1995 1995 2000 2000
B 215 215 215 215 215 215 215 220 220
S BARS LENGTH 360 360 360 360 360 360 360 360 360
W BARS # SETS 12 12 12 12 12 12 12 12 12

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 210 210 210 210 210 210 210 210 230
T 210 210 210 210 210 210 210 210 230
F 500 500 500 500 500 500 500 500 500
CONC. 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.5
FOOTING V ULS 139.2 124.2 121.6 129.4 139.9 153.8 186.2 221.1 259.6
REACTION V SLS 87.4 83.4 87.1 96.2 106.7 119.1 146.2 174.7 208.6
* H ULS 53 53.8 58 63.2 68.9 74.9 87.2 99.8 112.5
V 47 58 73 88 102 117 146 175 208
P BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 300 400 450 450 425 400 325 275 250
LENGTH 2210 2210 2210 2210 2210 2210 2210 2210 2230
H BARS C/C - - - - - - - - -
LENGTH - - - - - - - - -
J BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 550 625 600 575 500 450 375 300 300
LENGTH 3370 3370 3310 3210 3140 3140 3140 3140 3170
B 1650 1650 1590 1490 1420 1420 1420 1420 1420
D 1500 1500 1500 1500 1500 1500 1500 1500 1500
R 140 140 140 140 140 140 140 140 160
K BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 550 625 600 575 500 450 375 300 300
LENGTH 3140 3140 2870 2780 2710 2670 2610 2580 2610
B 1420 1420 1150 1060 990 950 890 860 860
D 1500 1500 1500 1500 1500 1500 1500 1500 1500
R 140 140 140 140 140 140 140 140 160
U BARS LENGTH 910 910 910 910 910 910 910 910 1000
C 550 550 550 550 550 550 550 550 640
T BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 325 350 325 300 275 250 225 200 200
LENGTH 1500 1500 1500 1500 1500 1500 1500 1500 1500
R BARS # SETS 39 39 39 39 39 39 39 39 41
V BARS LENGTH 1995 1995 1995 1995 1995 1995 1995 1995 2005
B 215 215 215 215 215 215 215 215 225
S BARS LENGTH 360 360 360 360 360 360 360 360 360
W BARS # SETS 12 12 12 12 12 12 12 12 12

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 210 210 210 210 210 210 210 220 240
T 210 210 210 210 210 210 210 220 230
F 500 500 500 500 500 500 500 500 500
CONC. 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.6 2.7
FOOTING V ULS 140.7 125.8 123.2 131 141.4 155.4 187.7 225.6 267.1
REACTION V SLS 88.7 84.7 88.3 97.5 108 120.4 147.5 178.4 212.2
* H ULS 60.2 61.4 66.1 72 78.4 85 98.8 112.8 127.8
V 48 60 74 89 103 118 147 178 212
P BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 300 400 450 450 450 425 350 300 275
LENGTH 2210 2210 2210 2210 2210 2210 2210 2220 2240
H BARS C/C - - - - - - - - -
LENGTH - - - - - - - - -
J BARS SIZE 15 15 15 15 15 15 15 15 20
C/C 500 575 550 500 450 400 325 300 400
LENGTH 3620 3620 3620 3620 3610 3540 3450 3430 3600
B 1650 1650 1650 1650 1640 1570 1480 1440 1600
D 1750 1750 1750 1750 1750 1750 1750 1750 1750
R 140 140 140 140 140 140 140 150 160
K BARS SIZE 15 15 15 15 15 15 15 15 20
C/C 500 575 550 500 450 400 325 300 400
LENGTH 3390 3390 3390 3390 3180 3110 3020 3010 2980
B 1420 1420 1420 1420 1210 1140 1050 1020 980
D 1750 1750 1750 1750 1750 1750 1750 1750 1750
R 140 140 140 140 140 140 140 150 160
U BARS LENGTH 910 910 910 910 910 910 910 960 1010
C 550 550 550 550 550 550 550 600 650
T BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 275 275 275 250 225 200 175 150 150
LENGTH 1750 1750 1750 1750 1750 1750 1750 1750 1750
R BARS # SETS 43 43 43 43 43 43 43 43 45
V BARS LENGTH 1995 1995 1995 1995 1995 1995 1995 2000 2010
B 215 215 215 215 215 215 215 220 230
S BARS LENGTH 360 360 360 360 360 360 360 360 360
W BARS # SETS 12 12 12 12 12 12 12 12 12

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 210 210 210 210 210 210 220 230 250
T 210 210 210 210 210 210 210 220 240
F 500 500 500 500 500 500 500 500 500
CONC. 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.7 2.9
FOOTING V ULS 142.3 127.3 124.7 132.5 143 156.9 189.2 229.6 272.3
REACTION V SLS 89.9 86 89.6 98.8 109.3 121.7 150.5 181.7 216.4
* H ULS 67.9 69.3 74.6 81.1 88.1 95.5 110.5 126.9 142.5
V 49 61 76 90 105 119 149 181 216
P BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 325 425 450 450 450 450 375 325 325
LENGTH 2210 2210 2210 2210 2210 2210 2220 2230 2250
H BARS C/C - - - - - - - - -
LENGTH - - - - - - - - -
J BARS SIZE 15 15 15 15 15 15 20 20 20
C/C 475 525 475 425 375 325 400 375 375
LENGTH 3870 3870 3870 3870 3870 3870 4080 4020 4050
B 1650 1650 1650 1650 1650 1650 1860 1780 1780
D 2000 2000 2000 2000 2000 2000 2000 2000 2000
R 140 140 140 140 140 140 140 150 170
K BARS SIZE 15 15 15 15 15 15 20 20 20
C/C 475 525 475 425 375 325 400 375 375
LENGTH 3640 3640 3640 3640 3640 3640 3780 3410 3430
B 1420 1420 1420 1420 1420 1420 1560 1170 1160
D 2000 2000 2000 2000 2000 2000 2000 2000 2000
R 140 140 140 140 140 140 140 150 170
U BARS LENGTH 910 910 910 910 910 910 930 970 1050
C 550 550 550 550 550 550 570 610 690
T BARS SIZE 15 15 15 15 15 15 15 20 20
C/C 225 225 225 200 175 150 150 200 200
LENGTH 2000 2000 2000 2000 2000 2000 2000 2000 2000
R BARS # SETS 47 47 47 47 47 47 47 49 49
V BARS LENGTH 1995 1995 1995 1995 1995 1995 2000 2005 2015
B 215 215 215 215 215 215 220 225 235
S BARS LENGTH 360 360 360 360 360 360 360 360 360
W BARS # SETS 12 12 12 12 12 12 12 12 12

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 210 210 210 210 210 210 210 220 240
T 210 210 210 210 210 210 220 230 250
F 500 500 500 500 500 500 500 500 500
CONC. 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.5 2.6
FOOTING V ULS 162.7 139 141.7 150.9 164.3 180.6 219.6 264.2 314.2
REACTION V SLS 101.1 93.3 100.8 111.7 124.8 139.5 172.7 208.8 249.2
* H ULS 46 46 49 53 57.5 62.2 72 81.9 92
V 51 65 82 100 117 135 170 207 247
P BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 200 275 275 275 250 225 200 175 150
LENGTH 2710 2710 2710 2710 2710 2710 2710 2720 2740
H BARS C/C - - - 425 400 350 300 400 375
LENGTH - - - 1540 1560 1580 1600 1160 1320
J BARS SIZE 15 15 15 15 15 15 15 20 20
C/C 375 450 450 425 400 350 300 400 375
LENGTH 3140 3140 3140 2400 2390 2380 2380 2610 2560
B 1670 1670 1670 930 920 910 890 1110 1030
D 1250 1250 1250 1250 1250 1250 1250 1250 1250
R 140 140 140 140 140 140 150 160 180
K BARS SIZE 15 15 15 15 15 15 15 20 20
C/C 375 450 450 425 400 350 300 400 375
LENGTH 2460 2390 2330 1970 1950 1940 1960 1990 1960
B 990 920 860 500 480 470 470 490 430
D 1250 1250 1250 1250 1250 1250 1250 1250 1250
R 140 140 140 140 140 140 150 160 180
U BARS LENGTH 910 910 910 910 910 910 940 980 1070
C 550 550 550 550 550 550 580 620 710
T BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 400 450 450 425 400 375 350 325 350
LENGTH 1250 1250 1250 1250 1250 1250 1250 1250 1250
R BARS # SETS 40 40 40 40 40 40 40 42 42
V BARS LENGTH 1995 1995 1995 1995 1995 1995 1995 2000 2010
B 215 215 215 215 215 215 215 220 230
S BARS LENGTH 360 360 360 360 360 360 360 360 360
W BARS # SETS 12 12 12 12 12 12 12 12 12

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 210 210 210 210 210 210 210 230 250
T 210 210 210 210 210 210 220 240 260
F 500 500 500 500 500 500 500 500 500
CONC. 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.7 2.8
FOOTING V ULS 164.2 140.5 143.2 152.5 165.8 182.2 221.8 268.8 319.3
REACTION V SLS 102.4 94.6 102.1 113 126.1 140.7 174 212.6 253.4
* H ULS 53.2 53.5 57.2 62 67.3 72.8 84 95.8 107.6
V 52 66 83 101 119 136 171 211 251
P BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 200 275 275 275 250 225 200 175 175
LENGTH 2710 2710 2710 2710 2710 2710 2710 2730 2750
H BARS C/C - - - - - 350 400 400 400
LENGTH - - - - - 1300 900 1100 1120
J BARS SIZE 15 15 15 15 15 15 20 20 20
C/C 375 450 450 425 375 350 400 400 400
LENGTH 3390 3390 3390 3390 3390 2770 2980 2910 2930
B 1670 1670 1670 1670 1670 1050 1240 1140 1130
D 1500 1500 1500 1500 1500 1500 1500 1500 1500
R 140 140 140 140 140 140 150 170 190
K BARS SIZE 15 15 15 15 15 15 20 20 20
C/C 375 450 450 425 375 350 400 400 400
LENGTH 2830 2750 2660 2610 2570 2340 2370 2290 2330
B 1110 1030 940 890 850 620 630 520 530
D 1500 1500 1500 1500 1500 1500 1500 1500 1500
R 140 140 140 140 140 140 150 170 190
U BARS LENGTH 910 910 910 910 910 910 940 1030 1110
C 550 550 550 550 550 550 580 670 750
T BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 325 350 350 325 300 275 250 250 250
LENGTH 1500 1500 1500 1500 1500 1500 1500 1500 1500
R BARS # SETS 42 42 42 42 42 42 42 44 44
V BARS LENGTH 1995 1995 1995 1995 1995 1995 1995 2005 2015
B 215 215 215 215 215 215 215 225 235
S BARS LENGTH 360 360 360 360 360 360 360 360 360
W BARS # SETS 12 12 12 12 12 12 12 12 12

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 210 210 210 210 210 220 220 240 260
T 210 210 210 210 210 210 230 250 270
F 500 500 500 500 500 500 500 500 500
CONC. 2.6 2.6 2.6 2.6 2.6 2.6 2.7 2.8 3.0
FOOTING V ULS 165.8 142 144.8 154 167.4 185.5 225.4 272.9 323.8
REACTION V SLS 103.6 95.9 103.3 114.3 127.3 143.5 177.5 216.5 257.7
* H ULS 60.7 61.4 65.7 71.2 77.3 84 96.6 110 123.5
V 53 67 85 102 120 138 174 213 254
P BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 200 275 275 275 275 250 225 200 200
LENGTH 2710 2710 2710 2710 2710 2720 2720 2740 2760
H BARS C/C - - - - - - - - -
LENGTH - - - - - - - - -
J BARS SIZE 15 15 15 15 15 15 15 20 20
C/C 375 425 425 400 350 325 300 400 400
LENGTH 3690 3640 3640 3640 3640 3640 3670 3840 3870
B 1720 1670 1670 1670 1670 1670 1670 1810 1810
D 1750 1750 1750 1750 1750 1750 1750 1750 1750
R 140 140 140 140 140 140 160 180 200
K BARS SIZE 15 15 15 15 15 15 15 20 20
C/C 375 425 425 400 350 325 300 400 400
LENGTH 3260 3150 3030 2960 2920 2860 2900 2930 2970
B 1290 1180 1060 990 950 890 900 900 910
D 1750 1750 1750 1750 1750 1750 1750 1750 1750
R 140 140 140 140 140 140 160 180 200
U BARS LENGTH 910 910 910 910 910 930 980 1070 1150
C 550 550 550 550 550 570 620 710 790
T BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 250 275 275 250 225 200 200 200 200
LENGTH 1750 1750 1750 1750 1750 1750 1750 1750 1750
R BARS # SETS 46 46 46 46 46 46 48 48 48
V BARS LENGTH 1995 1995 1995 1995 1995 2000 2000 2010 2020
B 215 215 215 215 215 220 220 230 240
S BARS LENGTH 360 360 360 360 360 360 360 360 360
W BARS # SETS 12 12 12 12 12 12 12 12 12

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 210 210 210 210 210 210 230 250 280
T 210 210 210 210 210 210 230 260 280
F 500 500 500 500 500 500 500 500 500
CONC. 2.7 2.7 2.7 2.7 2.7 2.7 2.9 3.0 3.3
FOOTING V ULS 167.3 143.6 146.3 155.6 168.9 185.3 229.9 277.8 332.7
REACTION V SLS 104.9 97.2 104.6 115.6 128.6 143.3 180.6 220.5 264.3
* H ULS 68.6 69.6 74.5 80.7 87.5 94.5 109.2 124.1 139.1
V 54 68 86 103 121 138 178 217 261
P BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 200 275 300 300 275 250 225 225 200
LENGTH 2710 2710 2710 2710 2710 2710 2730 2750 2780
H BARS C/C - - - - - - - - -
LENGTH - - - - - - - - -
J BARS SIZE 15 15 15 15 15 15 20 20 20
C/C 350 400 400 350 325 300 400 400 375
LENGTH 4120 4050 3890 3890 3890 3890 4060 4110 4140
B 1900 1830 1670 1670 1670 1670 1810 1810 1810
D 2000 2000 2000 2000 2000 2000 2000 2000 2000
R 140 140 140 140 140 140 160 190 210
K BARS SIZE 15 15 15 15 15 15 20 20 20
C/C 350 400 400 350 325 300 400 400 375
LENGTH 3890 3620 3450 3360 3290 3250 3260 3310 3350
B 1670 1400 1230 1140 1070 1030 1010 1010 1020
D 2000 2000 2000 2000 2000 2000 2000 2000 2000
R 140 140 140 140 140 140 160 190 210
U BARS LENGTH 910 910 910 910 910 910 1000 1110 1210
C 550 550 550 550 550 550 640 750 850
T BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 200 225 225 200 175 175 175 175 175
LENGTH 2000 2000 2000 2000 2000 2000 2000 2000 2000
R BARS # SETS 50 50 50 50 50 50 52 50 50
V BARS LENGTH 1995 1995 1995 1995 1995 1995 2005 2015 2030
B 215 215 215 215 215 215 225 235 250
S BARS LENGTH 360 360 360 360 360 360 360 360 360
W BARS # SETS 12 12 12 12 12 12 12 12 12

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 210 210 210 210 210 220 220 230 260
T 220 210 210 210 210 220 240 260 290
F 500 500 500 500 500 500 500 500 500
CONC. 2.5 2.5 2.5 2.5 2.5 2.6 2.6 2.7 3.0
FOOTING V ULS 185.7 155.5 162.5 173.7 189.8 212.2 258.1 311 371.8
REACTION V SLS 115.2 104.7 115.4 128.3 143.9 163.4 202.3 245.6 294.9
* H ULS 45.2 44.7 46.9 50.2 54 57.9 66.5 75.3 83.8
V 56 72 93 113 134 156 197 241 291
P BARS SIZE 15 15 15 15 15 15 15 20 20
C/C 150 200 200 200 175 175 150 200 175
LENGTH 3210 3210 3210 3210 3210 3220 3220 3230 3260
H BARS C/C - 325 325 300 400 350 300 300 325
LENGTH - 1620 2000 2040 1760 1780 1760 1740 1760
J BARS SIZE 20 15 15 15 20 20 20 20 20
C/C 400 325 325 300 400 350 300 300 325
LENGTH 3550 2610 2420 2400 2540 2550 2570 2600 2640
B 2060 1140 950 930 1070 1060 1050 1050 1040
D 1250 1250 1250 1250 1250 1250 1250 1250 1250
R 150 140 140 140 140 150 170 190 220
K BARS SIZE 20 15 15 15 20 20 20 20 20
C/C 400 325 325 300 400 350 300 300 325
LENGTH 2550 2150 1990 1970 1920 1930 1960 2000 2080
B 1060 680 520 500 450 440 440 450 480
D 1250 1250 1250 1250 1250 1250 1250 1250 1250
R 150 140 140 140 140 150 170 190 220
U BARS LENGTH 940 910 910 910 910 960 1010 1080 1210
C 580 550 550 550 550 600 650 720 850
T BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 425 450 450 450 450 450 450 450 450
LENGTH 1250 1250 1250 1250 1250 1250 1250 1250 1250
R BARS # SETS 43 43 43 43 43 43 45 45 45
V BARS LENGTH 1995 1995 1995 1995 1995 2000 2000 2005 2020
B 215 215 215 215 215 220 220 225 240
S BARS LENGTH 360 360 360 360 360 360 360 360 360
W BARS # SETS 12 12 12 12 12 12 12 12 12

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 210 210 210 210 210 210 220 240 270
T 230 210 210 210 210 220 250 270 290
F 500 500 500 500 500 500 500 500 500
CONC. 2.7 2.6 2.6 2.6 2.6 2.6 2.8 2.9 3.1
FOOTING V ULS 187.3 157.1 164 175.2 191.4 212.1 259.7 315.8 376.3
REACTION V SLS 117 105.9 116.7 129.6 145.2 163.4 204.3 249.5 298.6
* H ULS 52.5 52.6 55.6 59.8 64.4 69.3 79.6 90 100.5
V 58 73 94 114 135 155 200 245 293
P BARS SIZE 15 15 15 15 15 15 15 20 20
C/C 175 200 200 200 175 175 150 200 200
LENGTH 3210 3210 3210 3210 3210 3210 3220 3240 3270
H BARS C/C - - 325 300 400 375 325 325 325
LENGTH - - 1920 1980 1580 1560 1700 1700 1740
J BARS SIZE 20 15 15 15 20 20 20 20 20
C/C 400 325 325 300 400 375 325 325 325
LENGTH 3810 3640 2710 2680 2880 2900 2850 2880 2910
B 2060 1920 990 960 1160 1160 1070 1070 1060
D 1500 1500 1500 1500 1500 1500 1500 1500 1500
R 160 140 140 140 140 150 180 200 220
K BARS SIZE 20 15 15 15 20 20 20 20 20
C/C 400 325 325 300 400 375 325 325 325
LENGTH 2880 2720 2280 2250 2270 2280 2250 2290 2340
B 1130 1000 560 530 550 540 470 480 490
D 1500 1500 1500 1500 1500 1500 1500 1500 1500
R 160 140 140 140 140 150 180 200 220
U BARS LENGTH 970 910 910 910 910 940 1040 1130 1220
C 610 550 550 550 550 580 680 770 860
T BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 325 375 375 350 350 325 325 350 375
LENGTH 1500 1500 1500 1500 1500 1500 1500 1500 1500
R BARS # SETS 47 45 45 45 45 45 47 47 47
V BARS LENGTH 1995 1995 1995 1995 1995 1995 2000 2010 2025
B 215 215 215 215 215 215 220 230 245
S BARS LENGTH 360 360 360 360 360 360 360 360 360
W BARS # SETS 12 12 12 12 12 12 12 12 12

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 210 210 210 210 210 210 230 260 280
T 230 210 210 210 220 230 250 280 300
F 500 500 500 500 500 500 500 500 500
CONC. 2.8 2.7 2.7 2.7 2.7 2.8 2.9 3.2 3.3
FOOTING V ULS 188.8 158.6 165.6 176.8 192.9 213.6 264.2 323 381.8
REACTION V SLS 118.3 107.2 117.9 130.9 147 165.3 207.3 255.5 303.1
* H ULS 60.2 60.8 64.5 69.5 75 80.6 92.5 104.8 117.1
V 59 74 95 116 136 158 202 251 297
P BARS SIZE 15 15 15 15 15 15 15 15 20
C/C 150 175 200 200 200 175 150 150 200
LENGTH 3210 3210 3210 3210 3210 3210 3230 3260 3280
H BARS C/C - - - 300 375 350 350 350 350
LENGTH - - - 1580 1480 1480 1500 1520 1540
J BARS SIZE 20 15 15 15 20 20 20 20 20
C/C 400 325 325 300 375 350 350 350 350
LENGTH 4060 3890 3890 3130 3190 3190 3210 3250 3270
B 2060 1920 1920 1160 1200 1190 1180 1170 1160
D 1750 1750 1750 1750 1750 1750 1750 1750 1750
R 160 140 140 140 150 160 180 210 230
K BARS SIZE 20 15 15 15 20 20 20 20 20
C/C 400 325 325 300 375 350 350 350 350
LENGTH 3240 3050 2970 2660 2570 2580 2610 2670 2720
B 1240 1080 1000 690 580 580 580 590 610
D 1750 1750 1750 1750 1750 1750 1750 1750 1750
R 160 140 140 140 150 160 180 210 230
U BARS LENGTH 970 910 910 910 940 970 1050 1180 1270
C 610 550 550 550 580 610 690 820 910
T BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 275 275 275 275 250 250 250 275 275
LENGTH 1750 1750 1750 1750 1750 1750 1750 1750 1750
R BARS # SETS 51 49 49 49 49 51 51 49 50
V BARS LENGTH 1995 1995 1995 1995 1995 1995 2005 2020 2030
B 215 215 215 215 215 215 225 240 250
S BARS LENGTH 360 360 360 360 360 360 360 360 360
W BARS # SETS 12 12 12 12 12 12 12 12 12

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 210 210 210 210 210 210 250 270 290
T 240 210 210 210 220 230 260 280 310
F 500 500 500 500 500 500 500 500 500
CONC. 2.9 2.8 2.8 2.8 2.8 2.9 3.2 3.3 3.6
FOOTING V ULS 191 160.2 167.1 178.3 195.1 215.9 268 327.4 387.4
REACTION V SLS 120.2 108.5 119.2 132.2 148.3 166.6 212.9 259 307.7
* H ULS 67.7 69.2 73.7 79.4 85.4 91.7 105.8 119.8 133.6
V 61 76 96 117 137 159 208 253 302
P BARS SIZE 15 15 15 15 15 15 15 15 20
C/C 150 175 200 200 175 175 175 150 200
LENGTH 3210 3210 3210 3210 3210 3210 3250 3270 3290
H BARS C/C - - - - - - 375 350 350
LENGTH - - - - - - 1260 1500 1480
J BARS SIZE 20 15 15 20 20 20 20 20 20
C/C 400 300 300 400 375 325 375 350 350
LENGTH 4370 4140 4140 4280 4300 4310 3610 3520 3570
B 2100 1920 1920 2060 2060 2060 1310 1190 1190
D 2000 2000 2000 2000 2000 2000 2000 2000 2000
R 170 140 140 140 150 160 190 210 240
K BARS SIZE 20 15 15 20 20 20 20 20 20
C/C 400 300 300 400 375 325 375 350 350
LENGTH 3750 3410 3310 3270 3270 3270 3020 2950 3030
B 1480 1190 1090 1050 1030 1020 720 620 650
D 2000 2000 2000 2000 2000 2000 2000 2000 2000
R 170 140 140 140 150 160 190 210 240
U BARS LENGTH 1000 910 910 910 940 970 1110 1200 1310
C 640 550 550 550 580 610 750 840 950
T BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 225 225 225 200 200 175 225 225 225
LENGTH 2000 2000 2000 2000 2000 2000 2000 2000 2000
R BARS # SETS 55 53 53 53 53 55 53 53 54
V BARS LENGTH 1995 1995 1995 1995 1995 1995 2015 2025 2035
B 215 215 215 215 215 215 235 245 255
S BARS LENGTH 360 360 360 360 360 360 360 360 360
W BARS # SETS 12 12 12 12 12 12 12 12 12

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 210 210 220 220 220 220 220 260 290
T 240 220 220 230 230 240 270 300 330
F 500 500 500 500 500 500 500 500 500
CONC. 2.7 2.6 2.7 2.7 2.7 2.8 2.9 3.1 3.4
FOOTING V ULS 207.4 172.6 181.3 199.1 218.3 242.5 294.8 359.8 431.8
REACTION V SLS 128.8 116.5 129.4 147.6 165.4 186.6 231.7 286.8 343.2
* H ULS 43.7 42.8 44.1 46.5 49.5 52.9 60.3 66.9 72.7
V 62 80 105 128 152 177 225 280 336
P BARS SIZE 20 15 15 15 15 20 20 20 20
C/C 200 150 175 175 150 200 175 175 175
LENGTH 3710 3710 3720 3720 3720 3720 3720 3760 3790
H BARS C/C - 350 375 350 325 300 400 450 425
LENGTH - 1940 2140 2160 2200 2200 1740 1800 1780
J BARS SIZE 20 20 20 20 20 20 25 25 25
C/C 325 350 375 350 325 300 400 450 425
LENGTH 3830 2710 2620 2610 2590 2600 2840 2870 2930
B 2310 1220 1130 1110 1090 1080 1280 1260 1270
D 1250 1250 1250 1250 1250 1250 1250 1250 1250
R 170 150 150 160 160 170 200 230 260
K BARS SIZE 20 20 20 20 20 20 25 25 25
C/C 325 350 375 350 325 300 400 450 425
LENGTH 2660 2100 2000 1990 1980 1980 2070 2100 2190
B 1140 610 510 490 480 460 510 490 530
D 1250 1250 1250 1250 1250 1250 1250 1250 1250
R 170 150 150 160 160 170 200 230 260
U BARS LENGTH 1000 940 960 980 980 1010 1100 1240 1370
C 640 580 600 620 620 650 740 880 1010
T BARS SIZE 15 15 15 15 15 15 15 15 20
C/C 450 450 450 450 450 450 450 450 450
LENGTH 1250 1250 1250 1250 1250 1250 1250 1250 1250
R BARS # SETS 49 47 47 49 49 49 48 48 48
V BARS LENGTH 1995 1995 2000 2000 2000 2000 2000 2020 2035
B 215 215 220 220 220 220 220 240 255
S BARS LENGTH 360 360 360 360 360 360 360 360 360
W BARS # SETS 12 12 12 12 12 12 12 12 12

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 220 220 220 220 220 220 230 260 290
T 250 220 220 230 240 250 270 300 340
F 500 500 500 500 500 500 500 500 500
CONC. 2.9 2.8 2.8 2.8 2.9 2.9 3.0 3.3 3.6
FOOTING V ULS 210.3 175.2 182.9 200.7 219.9 244.1 297.2 364.9 434.8
REACTION V SLS 131.4 118.6 130.8 149 167.4 188.6 234.6 288.4 345.8
* H ULS 51.4 51.2 53.3 56.7 60.6 64.9 74.3 82.9 91.6
V 65 82 106 129 154 178 227 282 338
P BARS SIZE 20 15 15 15 15 20 20 20 20
C/C 200 150 150 150 150 200 175 150 175
LENGTH 3720 3720 3720 3720 3720 3720 3730 3760 3790
H BARS C/C - 375 375 350 325 300 450 450 450
LENGTH - 1880 1980 2020 2160 2160 1740 1740 1740
J BARS SIZE 20 20 20 20 20 20 25 25 25
C/C 350 375 375 350 325 300 450 450 450
LENGTH 4090 3000 2950 2930 2870 2870 3100 3150 3200
B 2310 1260 1210 1180 1100 1090 1290 1290 1280
D 1500 1500 1500 1500 1500 1500 1500 1500 1500
R 180 150 150 160 170 180 200 230 270
K BARS SIZE 20 20 20 20 20 20 25 25 25
C/C 350 375 375 350 325 300 450 450 450
LENGTH 2990 2380 2330 2320 2260 2270 2330 2380 2470
B 1210 640 590 570 490 490 520 520 550
D 1500 1500 1500 1500 1500 1500 1500 1500 1500
R 180 150 150 160 170 180 200 230 270
U BARS LENGTH 1040 960 960 980 1010 1040 1110 1240 1390
C 680 600 600 620 650 680 750 880 1030
T BARS SIZE 15 15 15 15 15 15 15 15 20
C/C 375 425 450 450 450 450 450 450 450
LENGTH 1500 1500 1500 1500 1500 1500 1500 1500 1500
R BARS # SETS 50 49 49 51 51 50 50 48 50
V BARS LENGTH 2000 2000 2000 2000 2000 2000 2005 2020 2035
B 220 220 220 220 220 220 225 240 255
S BARS LENGTH 360 360 360 360 360 360 360 360 360
W BARS # SETS 12 12 12 12 12 12 12 12 12

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 210 220 220 220 220 220 240 280 310
T 250 220 220 230 240 250 280 310 340
F 500 500 500 500 500 500 500 500 600
CONC. 3.0 2.9 2.9 2.9 3.0 3.0 3.2 3.5 4.0
FOOTING V ULS 210.5 176.8 184.5 203.1 222.3 246.5 303.8 370 442.3
REACTION V SLS 132 120 132.1 150.3 168.8 189.9 238.4 294.6 351.9
* H ULS 59 59.7 62.7 66.9 71.7 76.8 87.6 98.5 109
V 65 83 107 131 155 179 231 287 346
P BARS SIZE 20 15 15 15 15 20 20 20 20
C/C 200 150 150 150 150 200 175 175 175
LENGTH 3710 3720 3720 3720 3720 3720 3740 3780 3810
H BARS C/C - 375 375 350 325 300 300 300 300
LENGTH - 1520 1920 1940 1940 1920 2120 2180 2180
J BARS SIZE 20 20 20 20 20 20 20 20 20
C/C 325 375 375 350 325 300 300 300 300
LENGTH 4340 3430 3230 3220 3230 3240 3180 3210 3250
B 2310 1440 1240 1220 1210 1210 1100 1080 1080
D 1750 1750 1750 1750 1750 1750 1750 1750 1750
R 180 150 150 160 170 180 210 240 270
K BARS SIZE 20 20 20 20 20 20 20 20 20
C/C 325 375 375 350 325 300 300 300 300
LENGTH 3330 2820 2620 2610 2620 2630 2610 2670 2730
B 1300 830 630 610 600 600 530 540 560
D 1750 1750 1750 1750 1750 1750 1750 1750 1750
R 180 150 150 160 170 180 210 240 270
U BARS LENGTH 1030 960 960 980 1010 1040 1150 1290 1420
C 670 600 600 620 650 680 790 930 1060
T BARS SIZE 15 15 15 15 15 15 15 15 20
C/C 275 325 325 325 325 325 325 375 425
LENGTH 1750 1750 1750 1750 1750 1750 1750 1750 1750
R BARS # SETS 54 53 53 55 55 54 52 54 54
V BARS LENGTH 1995 2000 2000 2000 2000 2000 2010 2030 2095
B 215 220 220 220 220 220 230 250 315
S BARS LENGTH 360 360 360 360 360 360 360 360 460
W BARS # SETS 12 12 12 12 12 12 12 12 12

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 220 220 220 220 220 220 260 290 320
T 260 230 230 230 240 250 290 320 340
F 500 500 500 500 500 500 500 500 600
CONC. 3.2 3.0 3.0 3.0 3.1 3.1 3.5 3.8 4.2
FOOTING V ULS 213.5 178.5 186.1 204.7 223.9 248.1 309.9 377.8 448.2
REACTION V SLS 134.7 121.9 134.1 151.6 170.1 191.3 244.1 299 356
* H ULS 67.3 68.4 72.2 77.2 82.8 88.7 101.4 114 126.8
V 68 85 108 132 157 180 236 292 350
P BARS SIZE 20 15 15 15 15 20 20 20 20
C/C 200 150 175 150 150 200 200 175 175
LENGTH 3720 3720 3720 3720 3720 3720 3760 3790 3820
H BARS C/C - - 375 350 300 300 300 300 300
LENGTH - - 1540 1860 1860 1860 1920 2120 2180
J BARS SIZE 20 20 20 20 20 20 20 20 20
C/C 350 375 375 350 300 300 300 300 300
LENGTH 4610 4560 3670 3510 3520 3520 3560 3500 3510
B 2310 2310 1420 1260 1250 1240 1210 1110 1090
D 2000 2000 2000 2000 2000 2000 2000 2000 2000
R 190 160 160 160 170 180 220 250 270
K BARS SIZE 20 20 20 20 20 20 20 20 20
C/C 350 375 375 350 300 300 300 300 300
LENGTH 3730 3440 3060 2900 2900 2910 2990 2960 3000
B 1430 1190 810 650 630 630 640 570 580
D 2000 2000 2000 2000 2000 2000 2000 2000 2000
R 190 160 160 160 170 180 220 250 270
U BARS LENGTH 1070 980 980 980 1010 1040 1210 1340 1440
C 710 620 620 620 650 680 850 980 1080
T BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 250 250 250 250 250 225 275 275 300
LENGTH 2000 2000 2000 2000 2000 2000 2000 2000 2000
R BARS # SETS 56 59 59 59 59 56 56 58 58
V BARS LENGTH 2000 2000 2000 2000 2000 2000 2020 2035 2100
B 220 220 220 220 220 220 240 255 320
S BARS LENGTH 360 360 360 360 360 360 360 360 460
W BARS # SETS 12 12 12 12 12 12 12 12 12

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 220 220 220 220 230 250 290 320 350
T 280 230 230 240 260 270 300 330 360
F 500 500 500 500 500 500 500 600 600
CONC. 3.5 3.3 3.3 3.3 3.4 3.6 4.0 4.5 4.8
FOOTING V ULS 218.3 182.4 190.1 208.7 229.8 259 320 390.7 463.5
REACTION V SLS 138.6 124.6 136.8 155 175.6 200.2 253.6 309.6 368.5
* H ULS 83.4 86.4 91.7 98 105.5 113.4 129.5 146 162.2
V 71 88 112 135 161 188 245 304 361
P BARS SIZE 15 15 15 15 15 15 15 20 20
C/C 150 150 150 150 150 150 150 200 175
LENGTH 3720 3720 3720 3720 3730 3750 3790 3820 3850
H BARS C/C - - - - - - 350 325 325
LENGTH - - - - - - 1480 1880 1900
J BARS SIZE 20 20 20 20 20 20 20 20 20
C/C 350 350 350 300 300 325 350 325 325
LENGTH 5440 5060 5060 5080 5110 5120 4310 4160 4200
B 2610 2310 2310 2310 2310 2310 1450 1250 1240
D 2500 2500 2500 2500 2500 2500 2500 2500 2500
R 210 160 160 170 190 200 230 260 290
K BARS SIZE 20 20 20 20 20 20 20 20 20
C/C 350 350 350 300 300 325 350 325 325
LENGTH 5140 4200 4060 4020 4010 3990 3740 3630 3700
B 2310 1450 1310 1250 1210 1180 880 720 740
D 2500 2500 2500 2500 2500 2500 2500 2500 2500
R 210 160 160 170 190 200 230 260 290
U BARS LENGTH 1130 980 980 1010 1080 1140 1280 1410 1540
C 770 620 620 650 720 780 920 1050 1180
T BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 175 175 150 150 150 175 175 200 200
LENGTH 2500 2500 2500 2500 2500 2500 2500 2500 2500
R BARS # SETS 64 65 65 65 64 64 66 66 64
V BARS LENGTH 2000 2000 2000 2000 2005 2015 2035 2100 2115
B 220 220 220 220 225 235 255 320 335
S BARS LENGTH 360 360 360 360 360 360 360 460 460
W BARS # SETS 12 12 12 12 12 12 12 12 12

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 220 220 220 220 220 220 250 290 330
T 260 240 240 250 260 270 300 330 370
F 500 500 500 500 500 500 500 500 600
CONC. 3.1 3.0 3.0 3.0 3.1 3.1 3.4 3.7 4.3
FOOTING V ULS 220.6 192.6 201.6 224.9 247.4 274.3 341.3 413.8 497.5
REACTION V SLS 138.9 130.9 144.7 166.5 188.2 211.4 267.6 329.2 395.9
* H ULS 50.1 49 50.4 53.1 56.3 60.2 67.1 73.9 79
V 70 90 117 144 172 198 258 321 389
P BARS SIZE 20 20 20 20 20 20 20 20 20
C/C 175 200 200 175 175 150 150 150 150
LENGTH 4220 4220 4220 4220 4220 4220 4250 4290 4330
H BARS C/C - 325 300 300 400 375 375 400 375
LENGTH - 2300 2520 2560 2140 2160 2180 2240 2240
J BARS SIZE 20 20 20 20 25 25 25 25 25
C/C 300 325 300 300 400 375 375 400 375
LENGTH 4360 3050 2940 2920 3140 3130 3170 3200 3260
B 2560 1280 1170 1140 1340 1320 1310 1290 1290
D 1500 1500 1500 1500 1500 1500 1500 1500 1500
R 190 170 170 180 190 200 230 260 300
K BARS SIZE 20 20 20 20 25 25 25 25 25
C/C 300 325 300 300 400 375 375 400 375
LENGTH 3070 2430 2320 2310 2370 2360 2400 2460 2560
B 1270 660 550 530 570 550 540 550 590
D 1500 1500 1500 1500 1500 1500 1500 1500 1500
R 190 170 170 180 190 200 230 260 300
U BARS LENGTH 1070 1010 1010 1040 1070 1100 1220 1370 1540
C 710 650 650 680 710 740 860 1010 1180
T BARS SIZE 15 15 15 15 15 15 15 20 20
C/C 400 450 450 450 450 450 450 450 450
LENGTH 1500 1500 1500 1500 1500 1500 1500 1500 1500
R BARS # SETS 54 54 54 54 54 54 52 54 53
V BARS LENGTH 2000 2000 2000 2000 2000 2000 2015 2035 2105
B 220 220 220 220 220 220 235 255 325
S BARS LENGTH 360 360 360 360 360 360 360 360 460
W BARS # SETS 12 12 12 12 12 12 12 12 12

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 220 220 220 220 220 220 260 300 340
T 260 240 240 250 260 270 310 340 380
F 500 500 500 500 500 500 500 500 600
CONC. 3.2 3.1 3.1 3.1 3.2 3.2 3.6 3.9 4.6
FOOTING V ULS 222.2 194.2 203.2 226.5 249.9 275.9 346.2 421.6 503.6
REACTION V SLS 140.2 132.2 146.1 167.8 189.6 212.7 271.6 333.7 400.9
* H ULS 58.1 57.7 60.1 63.7 68 72.6 81.7 90.3 98.6
V 72 92 119 145 173 200 262 324 394
P BARS SIZE 20 20 20 20 20 20 20 20 20
C/C 150 200 200 175 175 150 150 150 150
LENGTH 4220 4220 4220 4220 4220 4220 4260 4300 4340
H BARS C/C - 325 300 450 400 375 400 400 400
LENGTH - 2220 2340 2100 2120 2120 2160 2200 2220
J BARS SIZE 20 20 20 25 25 25 25 25 25
C/C 300 325 300 450 400 375 400 400 400
LENGTH 4610 3340 3280 3400 3400 3400 3450 3480 3540
B 2560 1320 1260 1370 1350 1340 1320 1310 1300
D 1750 1750 1750 1750 1750 1750 1750 1750 1750
R 190 170 170 180 190 200 240 270 310
K BARS SIZE 20 20 20 25 25 25 25 25 25
C/C 300 325 300 450 400 375 400 400 400
LENGTH 3390 2730 2670 2630 2630 2630 2690 2750 2850
B 1340 710 650 600 580 570 560 580 610
D 1750 1750 1750 1750 1750 1750 1750 1750 1750
R 190 170 170 180 190 200 240 270 310
U BARS LENGTH 1070 1010 1010 1040 1070 1100 1270 1410 1580
C 710 650 650 680 710 740 910 1050 1220
T BARS SIZE 15 15 15 15 15 15 15 20 20
C/C 325 350 375 400 400 400 450 450 450
LENGTH 1750 1750 1750 1750 1750 1750 1750 1750 1750
R BARS # SETS 58 58 58 58 58 58 58 58 59
V BARS LENGTH 2000 2000 2000 2000 2000 2000 2020 2040 2110
B 220 220 220 220 220 220 240 260 330
S BARS LENGTH 360 360 360 360 360 360 360 360 460
W BARS # SETS 12 12 12 12 12 12 12 12 12

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 220 220 220 220 220 230 270 310 350
T 260 240 240 250 260 280 310 350 380
F 500 500 500 500 500 500 500 600 600
CONC. 3.3 3.2 3.2 3.3 3.3 3.4 3.8 4.4 4.8
FOOTING V ULS 223.9 195.8 204.8 228.1 251.5 280.3 348.1 427.3 509.9
REACTION V SLS 141.6 133.6 147.4 169.2 190.9 216.3 275 338.4 405.2
* H ULS 66.4 66.6 69.8 74.3 79.4 84.9 96.1 107 117.7
V 73 93 120 148 174 203 265 331 397
P BARS SIZE 20 20 20 20 20 20 20 20 20
C/C 150 175 200 175 175 175 150 150 150
LENGTH 4220 4220 4220 4220 4220 4230 4270 4310 4350
H BARS C/C - 300 300 450 400 400 425 425 425
LENGTH - 1680 2260 1860 1880 2080 2160 2160 2220
J BARS SIZE 20 20 20 25 25 25 25 25 25
C/C 300 300 300 450 400 400 425 425 425
LENGTH 4860 3860 3570 3770 3770 3690 3710 3770 3800
B 2560 1590 1300 1490 1470 1360 1330 1330 1310
D 2000 2000 2000 2000 2000 2000 2000 2000 2000
R 190 170 170 180 190 210 240 280 310
K BARS SIZE 20 20 20 25 25 25 25 25 25
C/C 300 300 300 450 400 400 425 425 425
LENGTH 3730 3190 2960 3000 3010 2920 2950 3050 3120
B 1430 920 690 720 710 590 570 610 630
D 2000 2000 2000 2000 2000 2000 2000 2000 2000
R 190 170 170 180 190 210 240 280 310
U BARS LENGTH 1070 1010 1010 1040 1070 1140 1280 1450 1590
C 710 650 650 680 710 780 920 1090 1230
T BARS SIZE 15 15 15 15 15 15 15 15 20
C/C 250 275 275 275 275 300 350 400 450
LENGTH 2000 2000 2000 2000 2000 2000 2000 2000 2000
R BARS # SETS 60 62 62 60 60 60 62 61 63
V BARS LENGTH 2000 2000 2000 2000 2000 2005 2025 2095 2115
B 220 220 220 220 220 225 245 315 335
S BARS LENGTH 360 360 360 360 360 360 360 460 460
W BARS # SETS 12 12 12 12 12 12 12 12 12

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 220 220 220 220 240 260 300 340 370
T 280 250 250 260 270 300 330 360 390
F 500 500 500 500 500 500 500 600 600
CONC. 3.6 3.5 3.5 3.5 3.7 3.9 4.3 5.0 5.3
FOOTING V ULS 227.9 199.1 208.9 231.4 259.3 290.5 362.9 440.6 521.9
REACTION V SLS 145.7 137 150.8 172.6 197.4 225.5 285.4 349.3 415.1
* H ULS 83.5 85.3 89.7 96 103.1 110.4 125.2 140.3 155.1
V 77 96 123 150 180 211 274 342 406
P BARS SIZE 20 20 20 20 20 20 20 20 20
C/C 175 200 200 200 175 200 175 175 150
LENGTH 4220 4220 4220 4220 4240 4260 4300 4340 4370
H BARS C/C - - - 400 425 450 300 300 450
LENGTH - - - 1320 1760 1780 2280 2360 2160
J BARS SIZE 20 20 20 25 25 25 20 20 25
C/C 300 300 300 400 425 450 300 300 450
LENGTH 5390 5340 5340 4550 4350 4380 4190 4210 4350
B 2560 2560 2560 1750 1540 1520 1280 1250 1350
D 2500 2500 2500 2500 2500 2500 2500 2500 2500
R 210 180 180 190 200 230 260 290 320
K BARS SIZE 20 20 20 25 25 25 20 20 25
C/C 300 300 300 400 425 450 300 300 450
LENGTH 4660 4210 4100 3780 3580 3610 3660 3720 3670
B 1830 1430 1320 980 770 750 750 760 670
D 2500 2500 2500 2500 2500 2500 2500 2500 2500
R 210 180 180 190 200 230 260 290 320
U BARS LENGTH 1130 1040 1040 1070 1130 1240 1380 1520 1650
C 770 680 680 710 770 880 1020 1160 1290
T BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 175 175 175 175 175 200 225 250 250
LENGTH 2500 2500 2500 2500 2500 2500 2500 2500 2500
R BARS # SETS 68 68 68 68 68 68 70 67 69
V BARS LENGTH 2000 2000 2000 2000 2010 2020 2040 2110 2125
B 220 220 220 220 230 240 260 330 345
S BARS LENGTH 360 360 360 360 360 360 360 460 460
W BARS # SETS 12 12 12 12 12 12 12 12 12

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 230 220 230 250 270 290 330 370 400
T 300 260 270 280 290 310 350 380 410
F 500 500 500 500 500 500 600 600 600
CONC. 4.0 3.7 3.9 4.0 4.2 4.5 5.2 5.6 6.0
FOOTING V ULS 232.9 203.1 214.6 241.8 270.6 302.5 375.6 455.9 538.6
REACTION V SLS 150.8 140.3 156.3 181.2 206.6 234.7 296.7 361.9 428.7
* H ULS 101 104.7 111.1 119.6 128.3 137.3 155.9 174.3 192.8
V 82 100 128 157 188 220 288 353 419
P BARS SIZE 20 20 15 15 15 20 20 20 20
C/C 175 200 150 150 150 200 200 175 150
LENGTH 4230 4220 4230 4250 4270 4290 4330 4370 4400
H BARS C/C - - - - - - 300 300 300
LENGTH - - - - - - 1600 2280 2300
J BARS SIZE 20 25 25 20 20 20 20 20 20
C/C 300 425 450 300 300 300 300 300 300
LENGTH 6220 6000 6010 5890 5910 5940 5070 4790 4820
B 2860 2700 2700 2560 2560 2560 1630 1300 1290
D 3000 3000 3000 3000 3000 3000 3000 3000 3000
R 230 190 200 210 220 240 280 310 340
K BARS SIZE 20 25 25 20 20 20 20 20 20
C/C 300 425 450 300 300 300 300 300 300
LENGTH 5920 5150 4940 4780 4740 4740 4430 4320 4380
B 2560 1850 1630 1450 1390 1360 990 830 850
D 3000 3000 3000 3000 3000 3000 3000 3000 3000
R 230 190 200 210 220 240 280 310 340
U BARS LENGTH 1200 1070 1110 1170 1220 1310 1480 1620 1750
C 840 710 750 810 860 950 1120 1260 1390
T BARS SIZE 20 20 20 20 15 15 15 15 15
C/C 200 175 200 200 150 150 150 175 175
LENGTH 3000 3000 3000 3000 3000 3000 3000 3000 3000
R BARS # SETS 72 74 74 74 74 74 73 75 75
V BARS LENGTH 2005 2000 2005 2015 2025 2035 2105 2125 2140
B 225 220 225 235 245 255 325 345 360
S BARS LENGTH 360 360 360 360 360 360 460 460 460
W BARS # SETS 12 12 12 12 12 12 12 12 12

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 250 250 260 280 300 320 360 400 430
T 320 270 280 290 310 330 370 400 430
F 500 500 500 500 500 600 600 600 700
CONC. 4.5 4.2 4.4 4.6 4.8 5.3 5.8 6.3 7.0
FOOTING V ULS 240.4 213 225.2 253.1 282.7 315.5 390.1 472 556.1
REACTION V SLS 157.3 147.9 164.3 189.8 216.7 245.4 308.6 375.2 443.2
* H ULS 121.8 127.4 135 145 155.2 165.8 187.7 209.5 231.2
V 88 106 136 166 197 232 298 365 435
P BARS SIZE 20 15 15 15 15 15 15 20 20
C/C 200 150 175 175 150 150 150 200 175
LENGTH 4250 4250 4260 4280 4300 4320 4360 4400 4430
H BARS C/C - - - - - - - - -
LENGTH - - - - - - - - -
J BARS SIZE 20 20 20 20 20 20 20 20 25
C/C 300 300 300 300 300 300 300 300 450
LENGTH 6750 6610 6390 6410 6440 6470 6530 6580 6770
B 2860 2800 2560 2560 2560 2560 2560 2560 2700
D 3500 3500 3500 3500 3500 3500 3500 3500 3500
R 250 200 210 220 240 260 300 330 360
K BARS SIZE 20 20 20 20 20 20 20 20 25
C/C 300 300 300 300 300 300 300 300 450
LENGTH 6450 6020 5740 5550 5500 5490 5480 5520 5580
B 2560 2210 1910 1700 1620 1580 1510 1500 1510
D 3500 3500 3500 3500 3500 3500 3500 3500 3500
R 250 200 210 220 240 260 300 330 360
U BARS LENGTH 1280 1140 1180 1240 1320 1410 1580 1720 1850
C 920 780 820 880 960 1050 1220 1360 1490
T BARS SIZE 20 20 20 20 20 20 20 20 20
C/C 175 150 150 175 175 175 200 200 200
LENGTH 3500 3500 3500 3500 3500 3500 3500 3500 3500
R BARS # SETS 82 80 80 80 82 82 83 81 81
V BARS LENGTH 2015 2015 2020 2030 2040 2100 2120 2140 2205
B 235 235 240 250 260 320 340 360 425
S BARS LENGTH 360 360 360 360 360 460 460 460 560
W BARS # SETS 12 12 12 12 12 12 12 12 12

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 290 290 290 310 330 350 390 420 460
T 340 290 290 300 310 330 380 410 450
F 500 500 500 600 600 600 600 700 700
CONC. 5.2 4.9 4.9 5.4 5.6 5.9 6.5 7.2 7.8
FOOTING V ULS 251.2 223.8 235.7 264.3 293.9 327.5 404.5 485 574.6
REACTION V SLS 166.8 158.3 173.1 199.2 226 255.3 320.5 385.9 458.4
* H ULS 146.7 151.9 161.4 172.9 185.1 197.1 221.7 245.8 270.8
V 97 116 143 177 208 241 309 378 449
P BARS SIZE 15 15 15 15 15 15 15 15 20
C/C 150 175 200 200 175 175 175 150 200
LENGTH 4290 4290 4290 4310 4330 4350 4390 4420 4460
H BARS C/C - - - - - - - - -
LENGTH - - - - - - - - -
J BARS SIZE 20 20 20 20 25 25 25 25 25
C/C 325 325 300 300 450 450 450 425 425
LENGTH 7280 7210 7130 6920 7080 7110 7190 7230 7300
B 2860 2860 2780 2560 2700 2700 2700 2700 2700
D 4000 4000 4000 4000 4000 4000 4000 4000 4000
R 270 220 220 230 240 260 310 340 380
K BARS SIZE 20 20 20 20 25 25 25 25 25
C/C 325 325 300 300 450 450 450 425 425
LENGTH 6980 6910 6570 6300 6160 6150 6200 6260 6340
B 2560 2560 2220 1940 1780 1740 1710 1730 1740
D 4000 4000 4000 4000 4000 4000 4000 4000 4000
R 270 220 220 230 240 260 310 340 380
U BARS LENGTH 1390 1250 1250 1310 1370 1450 1650 1780 1950
C 1030 890 890 950 1010 1090 1290 1420 1590
T BARS SIZE 20 20 25 20 20 20 20 20 20
C/C 150 150 225 150 150 150 150 150 150
LENGTH 4000 4000 4000 4000 4000 4000 4000 4000 4000
R BARS # SETS 90 88 88 90 90 90 89 89 91
V BARS LENGTH 2035 2035 2035 2095 2105 2115 2135 2200 2220
B 255 255 255 315 325 335 355 420 440
S BARS LENGTH 360 360 360 460 460 460 460 560 560
W BARS # SETS 12 12 12 12 12 12 12 12 12

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 220 220 220 220 220 240 280 330 380
T 280 260 260 270 280 300 340 380 410
F 500 500 500 500 500 500 500 600 600
CONC. 3.4 3.3 3.3 3.4 3.4 3.6 4.0 4.7 5.1
FOOTING V ULS 233 211.4 222.7 248.5 276.9 311.1 387.8 475.6 568.2
REACTION V SLS 148.3 144.5 161.1 184.7 210.6 240 305.2 376.6 451.7
* H ULS 56.6 55.6 57.2 60.2 63.7 67.4 74 80.3 85.2
V 78 101 130 161 191 224 292 368 442
P BARS SIZE 25 20 20 20 20 20 25 25 25
C/C 225 175 175 150 150 150 225 225 225
LENGTH 4720 4720 4720 4720 4720 4740 4780 4830 4880
H BARS C/C - 425 375 350 325 350 350 375 350
LENGTH - 2220 2480 2540 2540 2580 2600 2660 2720
J BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 400 425 375 350 325 350 350 375 350
LENGTH 5030 3600 3470 3440 3450 3460 3510 3560 3590
B 2950 1550 1420 1380 1370 1350 1340 1320 1310
D 1750 1750 1750 1750 1750 1750 1750 1750 1750
R 210 190 190 200 210 230 270 310 340
K BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 400 425 375 350 325 350 350 375 350
LENGTH 3520 2830 2700 2680 2680 2690 2780 2880 2940
B 1440 780 650 620 600 580 610 640 660
D 1750 1750 1750 1750 1750 1750 1750 1750 1750
R 210 190 190 200 210 230 270 310 340
U BARS LENGTH 1130 1070 1070 1100 1130 1210 1380 1560 1720
C 770 710 710 740 770 850 1020 1200 1360
T BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 350 400 450 450 450 450 400 350 300
LENGTH 1750 1750 1750 1750 1750 1750 1750 1750 1750
R BARS # SETS 59 61 61 61 59 58 60 60 62
V BARS LENGTH 2000 2000 2000 2000 2000 2010 2030 2105 2130
B 220 220 220 220 220 230 250 325 350
S BARS LENGTH 360 360 360 360 360 360 360 460 460
W BARS # SETS 12 12 12 12 12 12 12 12 12

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 220 220 220 220 220 250 290 340 390
T 280 260 260 270 280 310 350 380 410
F 500 500 500 500 500 500 500 600 600
CONC. 3.5 3.4 3.4 3.5 3.5 3.8 4.3 4.9 5.3
FOOTING V ULS 234.6 213 225.3 250.1 279.4 315.7 393.1 480.5 573.8
REACTION V SLS 149.7 145.8 162.4 186 212 243.8 309.5 380.6 456.2
* H ULS 65 64.7 67.3 71.2 75.8 80.4 89.5 98 105.7
V 80 102 131 162 192 227 297 371 445
P BARS SIZE 25 20 20 20 25 25 20 25 25
C/C 225 150 150 150 225 225 150 225 225
LENGTH 4720 4720 4720 4720 4720 4750 4790 4840 4890
H BARS C/C - 425 400 350 325 375 375 375 375
LENGTH - 2120 2260 2500 2520 2540 2580 2660 2720
J BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 400 425 400 350 325 375 375 375 375
LENGTH 5280 3900 3830 3710 3710 3750 3790 3820 3850
B 2950 1600 1530 1400 1380 1370 1350 1330 1320
D 2000 2000 2000 2000 2000 2000 2000 2000 2000
R 210 190 190 200 210 240 280 310 340
K BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 400 425 400 350 325 375 375 375 375
LENGTH 3860 3130 3060 2950 2940 2990 3070 3140 3190
B 1530 830 760 640 610 610 630 650 660
D 2000 2000 2000 2000 2000 2000 2000 2000 2000
R 210 190 190 200 210 240 280 310 340
U BARS LENGTH 1130 1070 1070 1100 1130 1250 1420 1580 1730
C 770 710 710 740 770 890 1060 1220 1370
T BARS SIZE 15 15 15 15 15 15 20 20 20
C/C 275 300 325 350 350 425 450 450 450
LENGTH 2000 2000 2000 2000 2000 2000 2000 2000 2000
R BARS # SETS 63 63 63 63 63 62 64 66 64
V BARS LENGTH 2000 2000 2000 2000 2000 2015 2035 2110 2135
B 220 220 220 220 220 235 255 330 355
S BARS LENGTH 360 360 360 360 360 360 360 460 460
W BARS # SETS 12 12 12 12 12 12 12 12 12

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 220 220 220 220 250 270 320 360 400
T 290 260 260 270 290 320 360 400 430
F 500 500 500 500 500 500 600 600 600
CONC. 3.8 3.7 3.7 3.7 4.0 4.3 5.0 5.5 5.9
FOOTING V ULS 237.8 216.3 228.5 253.4 287.3 324.4 406.3 492.8 584.7
REACTION V SLS 153.1 148.5 165.1 188.7 220 250.9 319.6 390.8 465.2
* H ULS 82.7 83.6 87.9 93.4 99.9 106.6 120 133.3 146.4
V 83 105 135 165 200 235 308 381 454
P BARS SIZE 20 20 20 20 20 20 20 25 25
C/C 150 150 150 150 150 150 150 225 225
LENGTH 4720 4720 4720 4720 4750 4770 4820 4860 4900
H BARS C/C - - 375 325 375 400 425 425 400
LENGTH - - 1720 2140 2240 2240 2560 2580 2640
J BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 400 400 375 325 375 400 425 425 400
LENGTH 5800 5750 4600 4390 4390 4420 4340 4390 4420
B 2950 2950 1800 1580 1540 1530 1380 1370 1350
D 2500 2500 2500 2500 2500 2500 2500 2500 2500
R 220 190 190 200 220 250 290 330 360
K BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 400 400 375 325 375 400 425 425 400
LENGTH 4640 4310 3830 3630 3620 3670 3630 3720 3780
B 1790 1510 1030 820 770 780 670 700 710
D 2500 2500 2500 2500 2500 2500 2500 2500 2500
R 220 190 190 200 220 250 290 330 360
U BARS LENGTH 1150 1070 1070 1100 1200 1310 1490 1660 1800
C 790 710 710 740 840 950 1130 1300 1440
T BARS SIZE 15 15 15 15 15 15 15 15 20
C/C 175 175 200 200 225 250 300 325 350
LENGTH 2500 2500 2500 2500 2500 2500 2500 2500 2500
R BARS # SETS 71 71 71 71 71 72 70 72 72
V BARS LENGTH 2000 2000 2000 2000 2015 2025 2100 2120 2140
B 220 220 220 220 235 245 320 340 360
S BARS LENGTH 360 360 360 360 360 360 460 460 460
W BARS # SETS 12 12 12 12 12 12 12 12 12

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 230 220 240 260 280 310 350 390 420
T 300 270 270 290 310 340 370 410 450
F 500 500 500 500 500 600 600 600 700
CONC. 4.2 3.9 4.1 4.3 4.5 5.2 5.6 6.1 6.8
FOOTING V ULS 242 220.4 234.3 264 300.7 338.9 419.4 507.3 599
REACTION V SLS 157.6 152 171.4 199 229.5 262.9 330.3 402.7 477
* H ULS 101.2 103.2 109.6 117.2 125.8 134.3 151.5 168.6 185.6
V 87 108 140 174 207 248 318 392 468
P BARS SIZE 20 20 20 20 20 20 20 20 25
C/C 150 150 175 175 175 175 150 150 225
LENGTH 4730 4720 4740 4760 4780 4810 4850 4890 4920
H BARS C/C - - - - 425 450 450 450 425
LENGTH - - - - 1760 2180 2280 2320 2560
J BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 400 375 400 425 425 450 450 450 425
LENGTH 6510 6260 6260 6300 5170 5000 5010 5050 4990
B 3150 2950 2950 2950 1790 1580 1540 1520 1390
D 3000 3000 3000 3000 3000 3000 3000 3000 3000
R 230 200 200 220 240 270 300 340 380
K BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 400 375 400 425 425 450 450 450 425
LENGTH 5750 5140 4880 4810 4410 4270 4310 4390 4380
B 2390 1830 1570 1460 1030 850 840 860 780
D 3000 3000 3000 3000 3000 3000 3000 3000 3000
R 230 200 200 220 240 270 300 340 380
U BARS LENGTH 1200 1100 1130 1210 1290 1420 1560 1730 1890
C 840 740 770 850 930 1060 1200 1370 1530
T BARS SIZE 20 20 15 15 15 15 15 15 15
C/C 200 200 150 150 175 175 200 200 200
LENGTH 3000 3000 3000 3000 3000 3000 3000 3000 3000
R BARS # SETS 74 77 77 77 76 76 76 78 77
V BARS LENGTH 2005 2000 2010 2020 2030 2095 2115 2135 2200
B 225 220 230 240 250 315 335 355 420
S BARS LENGTH 360 360 360 360 360 460 460 460 560
W BARS # SETS 12 12 12 12 12 12 12 12 12

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 250 260 270 290 310 340 380 420 460
T 320 290 300 310 330 360 390 430 460
F 500 500 500 500 600 600 600 700 700
CONC. 4.7 4.6 4.7 4.9 5.4 5.8 6.3 7.1 7.6
FOOTING V ULS 249.7 230.5 247.8 277.4 313.1 352.3 434.5 523.9 619
REACTION V SLS 164.2 161.7 181.1 208.6 239.8 274 342.7 416.4 493.4
* H ULS 122.3 126 134 143.5 153.2 163.4 184.1 204.8 225.7
V 93 117 149 182 220 258 330 407 483
P BARS SIZE 20 20 20 20 20 20 20 20 20
C/C 150 200 200 200 200 200 175 175 150
LENGTH 4750 4760 4770 4790 4810 4840 4880 4920 4960
H BARS C/C - - - - - - 300 450 425
LENGTH - - - - - - 1660 2220 2300
J BARS SIZE 25 20 25 20 20 20 20 25 25
C/C 450 300 450 300 300 300 300 450 425
LENGTH 7210 6660 6810 6690 6720 6770 5860 5650 5660
B 3320 2810 2950 2810 2810 2810 1860 1580 1550
D 3500 3500 3500 3500 3500 3500 3500 3500 3500
R 250 220 230 240 260 290 320 360 390
K BARS SIZE 25 20 25 20 20 20 20 25 25
C/C 450 300 450 300 300 300 300 450 425
LENGTH 6840 5990 5670 5520 5490 5510 5130 5010 5050
B 2950 2140 1810 1640 1580 1550 1130 940 940
D 3500 3500 3500 3500 3500 3500 3500 3500 3500
R 250 220 230 240 260 290 320 360 390
U BARS LENGTH 1280 1210 1250 1310 1390 1520 1660 1830 1970
C 920 850 890 950 1030 1160 1300 1470 1610
T BARS SIZE 20 20 20 20 20 15 15 15 15
C/C 175 175 175 175 200 150 150 150 150
LENGTH 3500 3500 3500 3500 3500 3500 3500 3500 3500
R BARS # SETS 84 83 82 84 84 84 86 84 85
V BARS LENGTH 2015 2020 2025 2035 2095 2110 2130 2200 2220
B 235 240 245 255 315 330 350 420 440
S BARS LENGTH 360 360 360 360 460 460 460 560 560
W BARS # SETS 12 12 12 12 12 12 12 12 12

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 290 290 300 320 340 370 410 450 500
T 350 310 310 330 350 370 410 450 480
F 500 500 500 600 600 600 700 700 700
CONC. 5.4 5.2 5.3 5.8 6.1 6.5 7.3 7.9 8.6
FOOTING V ULS 262.3 241.5 258.6 290 326.5 365.6 449.3 541.4 641.4
REACTION V SLS 175 171 190.1 219 250.9 285 355.9 430.8 511.9
* H ULS 146.6 150.7 160.5 171 182.2 194.5 218.6 242.1 267.1
V 103 125 157 195 230 268 345 421 501
P BARS SIZE 20 15 15 15 15 15 20 20 20
C/C 200 150 150 150 150 150 200 175 175
LENGTH 4790 4790 4800 4820 4840 4870 4910 4950 5000
H BARS C/C - - - - - - - - -
LENGTH - - - - - - - - -
J BARS SIZE 20 20 20 20 20 25 25 25 25
C/C 300 300 300 300 300 450 450 425 400
LENGTH 7550 7490 7190 7220 7250 7420 7480 7550 7590
B 3110 3110 2810 2810 2810 2950 2950 2950 2950
D 4000 4000 4000 4000 4000 4000 4000 4000 4000
R 280 240 240 260 280 300 340 380 410
K BARS SIZE 20 20 20 20 20 25 25 25 25
C/C 300 300 300 300 300 450 450 425 400
LENGTH 7250 7190 6430 6310 6260 6200 6190 6280 6290
B 2810 2810 2050 1900 1820 1730 1660 1680 1650
D 4000 4000 4000 4000 4000 4000 4000 4000 4000
R 280 240 240 260 280 300 340 380 410
U BARS LENGTH 1420 1310 1320 1410 1490 1590 1760 1930 2090
C 1060 950 960 1050 1130 1230 1400 1570 1730
T BARS SIZE 20 20 20 20 20 20 20 20 20
C/C 150 150 150 150 150 150 175 175 175
LENGTH 4000 4000 4000 4000 4000 4000 4000 4000 4000
R BARS # SETS 90 92 92 92 90 92 92 93 93
V BARS LENGTH 2035 2035 2040 2100 2110 2125 2195 2215 2240
B 255 255 260 320 330 345 415 435 460
S BARS LENGTH 360 360 360 460 460 460 560 560 560
W BARS # SETS 12 12 12 12 12 12 12 12 12

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 220 220 220 220 240 270 330 380 420
T 300 270 270 290 310 330 380 410 450
F 500 500 500 500 500 500 600 600 700
CONC. 3.8 3.6 3.6 3.7 4.0 4.2 5.1 5.5 6.2
FOOTING V ULS 249.5 228.6 244 271.4 308.9 350.8 437.2 536.7 636.8
REACTION V SLS 159.7 157.6 176.4 203.1 235.8 270.9 346.5 425.2 506.5
* H ULS 63.5 62.8 64.5 67.8 71.3 74.7 81 86.1 92.1
V 87 110 143 177 214 252 335 413 497
P BARS SIZE 25 20 25 25 25 25 25 25 25
C/C 200 150 225 225 200 200 225 225 200
LENGTH 5220 5220 5220 5220 5240 5270 5330 5380 5420
H BARS C/C - 350 325 300 300 325 350 325 325
LENGTH - 2600 2880 2920 2960 3020 3100 3140 3160
J BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 350 350 325 300 300 325 350 325 325
LENGTH 5560 3910 3770 3770 3780 3790 3840 3880 3940
B 3200 1600 1460 1420 1400 1380 1350 1350 1340
D 2000 2000 2000 2000 2000 2000 2000 2000 2000
R 230 200 200 220 240 260 310 340 380
K BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 350 350 325 300 300 325 350 325 325
LENGTH 3940 3140 3000 3000 3020 3050 3150 3220 3320
B 1580 830 690 650 640 640 660 690 720
D 2000 2000 2000 2000 2000 2000 2000 2000 2000
R 230 200 200 220 240 260 310 340 380
U BARS LENGTH 1180 1100 1100 1150 1240 1340 1560 1720 1890
C 820 740 740 790 880 980 1200 1360 1530
T BARS SIZE 15 15 15 15 15 20 20 20 20
C/C 300 325 375 425 450 450 450 450 450
LENGTH 2000 2000 2000 2000 2000 2000 2000 2000 2000
R BARS # SETS 66 66 66 66 66 68 68 67 69
V BARS LENGTH 2000 2000 2000 2000 2010 2025 2105 2130 2200
B 220 220 220 220 230 245 325 350 420
S BARS LENGTH 360 360 360 360 360 360 460 460 560
W BARS # SETS 12 12 12 12 12 12 12 12 12

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 230 220 240 260 290 320 360 410 450
T 310 280 290 310 330 350 390 430 460
F 500 500 500 500 500 600 600 700 700
CONC. 4.1 3.9 4.1 4.3 4.6 5.1 5.6 6.4 6.9
FOOTING V ULS 255.3 233.8 252.3 284.4 324.7 366.9 452.3 552.4 652.9
REACTION V SLS 164.4 161.1 183.2 213.1 248 284.1 357.1 438.2 519.7
* H ULS 81.6 81.8 85.9 90.9 96.4 101.8 112.9 123.9 134.4
V 91 114 150 186 224 266 344 428 509
P BARS SIZE 25 25 25 20 20 20 20 25 25
C/C 200 225 225 150 150 150 150 225 200
LENGTH 5230 5220 5240 5260 5290 5320 5360 5410 5450
H BARS C/C - 350 350 350 375 375 375 350 350
LENGTH - 1740 2560 2640 2960 3020 3080 3120 3180
J BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 350 350 350 350 375 375 375 350 350
LENGTH 6080 4850 4470 4460 4340 4350 4380 4440 4460
B 3200 2020 1620 1580 1430 1410 1380 1370 1350
D 2500 2500 2500 2500 2500 2500 2500 2500 2500
R 240 210 220 240 260 280 320 360 390
K BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 350 350 350 350 375 375 375 350 350
LENGTH 4690 3990 3700 3700 3600 3630 3710 3800 3860
B 1810 1160 850 820 690 690 710 730 750
D 2500 2500 2500 2500 2500 2500 2500 2500 2500
R 240 210 220 240 260 280 320 360 390
U BARS LENGTH 1220 1130 1180 1270 1370 1460 1630 1820 1960
C 860 770 820 910 1010 1100 1270 1460 1600
T BARS SIZE 15 15 15 15 15 15 20 20 20
C/C 175 200 225 250 300 350 450 450 450
LENGTH 2500 2500 2500 2500 2500 2500 2500 2500 2500
R BARS # SETS 74 74 74 76 76 74 76 75 77
V BARS LENGTH 2005 2000 2010 2020 2035 2100 2120 2195 2215
B 225 220 230 240 255 320 340 415 435
S BARS LENGTH 360 360 360 360 360 460 460 560 560
W BARS # SETS 12 12 12 12 12 12 12 12 12

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 230 230 240 260 300 330 370 420 460
T 320 280 290 310 340 360 400 450 480
F 500 500 500 500 500 600 600 700 700
CONC. 4.4 4.2 4.3 4.6 5.0 5.6 6.1 7.0 7.5
FOOTING V ULS 257.1 237.1 255.8 288.2 332.1 374.8 462.3 563.6 665.1
REACTION V SLS 168.1 165 186.2 216.3 254.1 290.7 364.5 447.4 529.8
* H ULS 100 102.1 108 115 122.9 130.7 146.1 161.6 176.9
V 94 117 152 189 230 273 351 436 518
P BARS SIZE 25 25 20 25 20 20 25 25 25
C/C 200 225 150 225 150 150 225 225 225
LENGTH 5230 5230 5240 5260 5300 5330 5370 5420 5460
H BARS C/C - - - 350 400 425 400 375 375
LENGTH - - - 2480 2600 2680 3000 3040 3080
J BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 375 350 350 350 400 425 400 375 375
LENGTH 6590 6530 6550 5040 5030 5040 4940 5000 5030
B 3200 3200 3200 1660 1610 1580 1420 1400 1390
D 3000 3000 3000 3000 3000 3000 3000 3000 3000
R 250 210 220 240 270 290 330 380 410
K BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 375 350 350 350 400 425 400 375 375
LENGTH 5730 5110 4900 4280 4300 4330 4280 4390 4440
B 2340 1780 1550 900 880 870 760 790 800
D 3000 3000 3000 3000 3000 3000 3000 3000 3000
R 250 210 220 240 270 290 330 380 410
U BARS LENGTH 1250 1140 1180 1270 1410 1510 1680 1890 2030
C 890 780 820 910 1050 1150 1320 1530 1670
T BARS SIZE 15 15 15 15 15 15 15 15 20
C/C 150 150 150 175 200 225 250 275 300
LENGTH 3000 3000 3000 3000 3000 3000 3000 3000 3000
R BARS # SETS 78 80 80 80 80 80 81 81 81
V BARS LENGTH 2005 2005 2010 2020 2040 2105 2125 2200 2220
B 225 225 230 240 260 325 345 420 440
S BARS LENGTH 360 360 360 360 360 460 460 560 560
W BARS # SETS 12 12 12 12 12 12 12 12 12

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 250 260 280 300 330 350 410 450 490
T 340 300 310 340 350 380 420 460 500
F 500 500 500 500 600 600 700 700 700
CONC. 4.9 4.8 5.0 5.3 5.9 6.2 7.2 7.8 8.4
FOOTING V ULS 266.1 247.3 266.8 303.1 343.9 386.4 480.4 576.7 680.7
REACTION V SLS 175.5 173.7 196.8 228.5 263.9 300.3 379.4 460.6 545.3
* H ULS 121.3 125.1 132.4 141.2 151.1 160.2 179.9 199 218.3
V 101 125 162 200 242 281 368 449 533
P BARS SIZE 25 20 20 20 20 20 20 20 25
C/C 225 150 150 175 175 150 150 150 225
LENGTH 5250 5260 5280 5300 5330 5350 5410 5450 5490
H BARS C/C - - - - 425 425 425 425 400
LENGTH - - - - 1960 2540 2700 2740 3040
J BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 400 400 425 425 425 425 425 425 400
LENGTH 7490 7060 7080 7120 5890 5640 5640 5680 5600
B 3570 3200 3200 3200 1950 1650 1590 1570 1420
D 3500 3500 3500 3500 3500 3500 3500 3500 3500
R 270 230 240 270 280 310 350 390 430
K BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 400 400 425 425 425 425 425 425 400
LENGTH 7120 5900 5640 5580 5090 4950 4990 5070 5030
B 3200 2040 1760 1660 1150 960 940 960 850
D 3500 3500 3500 3500 3500 3500 3500 3500 3500
R 270 230 240 270 280 310 350 390 430
U BARS LENGTH 1340 1240 1290 1410 1480 1590 1790 1960 2130
C 980 880 930 1050 1120 1230 1430 1600 1770
T BARS SIZE 20 20 20 20 15 15 15 15 15
C/C 175 175 200 200 150 150 175 175 200
LENGTH 3500 3500 3500 3500 3500 3500 3500 3500 3500
R BARS # SETS 88 86 88 88 88 90 87 89 89
V BARS LENGTH 2015 2020 2030 2040 2105 2115 2195 2215 2235
B 235 240 250 260 325 335 415 435 455
S BARS LENGTH 360 360 360 360 460 460 560 560 560
W BARS # SETS 12 12 12 12 12 12 12 12 12

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 290 300 310 330 360 380 440 480 520
T 360 330 330 350 370 400 440 480 520
F 500 500 600 600 600 600 700 700 800
CONC. 5.7 5.6 5.9 6.2 6.6 6.9 8.0 8.6 9.5
FOOTING V ULS 279.5 261.3 280.6 314.9 357.8 401.1 497 597.7 703.6
REACTION V SLS 186.4 185.4 206.8 238.3 275.3 312.4 393 475.5 561.5
* H ULS 146.3 150.2 159.4 169.4 180.7 191.4 214.9 237.7 260.6
V 110 136 174 212 253 292 380 463 551
P BARS SIZE 20 20 20 20 20 20 20 20 20
C/C 150 175 200 175 175 175 175 150 150
LENGTH 5290 5300 5310 5330 5360 5380 5440 5480 5520
H BARS C/C - - - - - - 425 400 400
LENGTH - - - - - - 1800 2640 2680
J BARS SIZE 25 20 25 25 25 25 25 25 25
C/C 450 300 450 450 450 450 425 400 400
LENGTH 8030 7470 7610 7640 7670 7720 6630 6270 6320
B 3570 3060 3200 3200 3200 3200 2050 1630 1610
D 4000 4000 4000 4000 4000 4000 4000 4000 4000
R 290 260 260 280 300 330 370 410 450
K BARS SIZE 25 20 25 25 25 25 25 25 25
C/C 450 300 450 450 450 450 425 400 400
LENGTH 7660 6810 6380 6280 6210 6260 5830 5680 5770
B 3200 2400 1970 1840 1740 1740 1250 1040 1060
D 4000 4000 4000 4000 4000 4000 4000 4000 4000
R 290 260 260 280 300 330 370 410 450
U BARS LENGTH 1450 1380 1390 1480 1580 1690 1890 2060 2230
C 1090 1020 1030 1120 1220 1330 1530 1700 1870
T BARS SIZE 20 20 20 20 20 20 20 20 20
C/C 150 150 150 175 175 175 200 200 200
LENGTH 4000 4000 4000 4000 4000 4000 4000 4000 4000
R BARS # SETS 94 96 96 94 96 95 97 97 97
V BARS LENGTH 2035 2040 2095 2105 2120 2130 2210 2230 2300
B 255 260 315 325 340 350 430 450 520
S BARS LENGTH 360 360 460 460 460 460 560 560 660
W BARS # SETS 12 12 12 12 12 12 12 12 12

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 220 220 260 260 280 310 360 410 480
T 320 280 300 320 350 370 410 450 490
F 500 500 500 500 500 600 600 700 700
CONC. 4.1 3.8 4.1 4.3 4.6 5.1 5.6 6.4 7.0
FOOTING V ULS 267.2 246.4 265.8 303.4 343.6 392.3 486.4 592.3 710.6
REACTION V SLS 171.6 169.4 196.3 227.1 263.4 303.3 382.8 469.4 564.3
* H ULS 61.9 60.5 61.5 63 65.2 67.1 70.5 73.3 93.4
V 94 119 159 198 239 283 368 458 551
P BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 175 200 200 200 225 200 200 200 200
LENGTH 5720 5720 5760 5760 5780 5810 5860 5910 5980
H BARS C/C 300 300 300 300 325 300 325 300 300
LENGTH 2660 3040 3440 3400 3420 3480 3520 3580 3660
J BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 300 300 300 300 325 300 325 300 300
LENGTH 4160 3950 3800 3830 3860 3870 3920 3970 4020
B 1770 1620 1440 1440 1420 1400 1390 1370 1360
D 2000 2000 2000 2000 2000 2000 2000 2000 2000
R 250 210 230 250 280 300 340 380 420
K BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 300 300 300 300 325 300 325 300 300
LENGTH 3420 3210 3060 3100 3140 3170 3260 3350 3440
B 1030 880 700 710 700 700 730 750 780
D 2000 2000 2000 2000 2000 2000 2000 2000 2000
R 250 210 230 250 280 300 340 380 420
U BARS LENGTH 1240 1130 1240 1290 1410 1510 1690 1870 2090
C 880 770 880 930 1050 1150 1330 1510 1730
T BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 325 400 300 300 300 300 300 300 250
LENGTH 2000 2000 2000 2000 2000 2000 2000 2000 2000
R BARS # SETS 70 70 70 72 71 71 71 73 73
V BARS LENGTH 2000 2000 2020 2020 2030 2095 2120 2195 2230
B 220 220 240 240 250 315 340 415 450
S BARS LENGTH 360 360 360 360 360 460 460 560 560
W BARS # SETS 12 12 12 12 12 12 12 12 12

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 230 230 230 260 300 320 370 430 480
T 320 290 300 330 360 380 420 460 500
F 500 500 500 500 500 600 600 700 700
CONC. 4.4 4.2 4.2 4.6 5.0 5.5 6.1 7.0 7.6
FOOTING V ULS 271.9 252.1 269.1 307.3 352.6 400 495.2 606 717.6
REACTION V SLS 175.5 174.2 195.7 231.2 270.7 309.7 390.1 479.7 571.3
* H ULS 80.6 80.4 83.2 87.5 91.9 96.7 105.7 114 121.5
V 97 123 160 202 245 289 375 468 558
P BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 175 200 200 200 225 200 200 200 200
LENGTH 5730 5730 5730 5760 5800 5820 5870 5930 5980
H BARS C/C - 300 300 325 325 350 325 325 300
LENGTH - 2860 2980 3320 3380 3420 3500 3580 3620
J BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 300 300 300 325 325 350 325 325 300
LENGTH 6340 4560 4500 4380 4410 4420 4450 4490 4550
B 3450 1710 1640 1470 1450 1430 1400 1380 1370
D 2500 2500 2500 2500 2500 2500 2500 2500 2500
R 250 220 230 260 290 310 350 390 430
K BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 300 300 300 325 325 350 325 325 300
LENGTH 4720 3820 3760 3640 3700 3730 3800 3890 3980
B 1830 970 900 730 740 740 750 780 800
D 2500 2500 2500 2500 2500 2500 2500 2500 2500
R 250 220 230 260 290 310 350 390 430
U BARS LENGTH 1250 1170 1200 1320 1460 1550 1730 1930 2120
C 890 810 840 960 1100 1190 1370 1570 1760
T BARS SIZE 15 15 15 15 15 20 20 20 20
C/C 200 225 250 325 400 450 450 450 400
LENGTH 2500 2500 2500 2500 2500 2500 2500 2500 2500
R BARS # SETS 78 78 78 80 77 77 79 81 78
V BARS LENGTH 2005 2005 2005 2020 2040 2100 2125 2205 2230
B 225 225 225 240 260 320 345 425 450
S BARS LENGTH 360 360 360 360 360 460 460 560 560
W BARS # SETS 12 12 12 12 12 12 12 12 12

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 230 230 260 290 320 350 400 440 500
T 340 290 320 340 370 390 440 480 520
F 500 500 500 500 600 600 600 700 700
CONC. 4.7 4.4 4.8 5.1 5.8 6.1 6.8 7.6 8.3
FOOTING V ULS 276.5 255.5 279.7 318.9 363.2 412.3 506.8 616.4 733.4
REACTION V SLS 180.1 177 204.5 239.9 278.6 319.8 402.6 489.3 584.4
* H ULS 99.6 101.3 106.3 112.7 119.3 126.1 139.8 153.4 166.1
V 101 126 168 209 256 298 386 476 570
P BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 200 200 200 225 225 225 225 200 200
LENGTH 5730 5730 5760 5790 5820 5850 5900 5940 6000
H BARS C/C - - 325 350 350 375 375 350 325
LENGTH - - 2840 3000 3060 3400 3480 3500 3580
J BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 325 300 325 350 350 375 375 350 325
LENGTH 6870 6800 5110 5070 5090 4960 5000 5050 5100
B 3450 3450 1720 1650 1620 1460 1420 1410 1390
D 3000 3000 3000 3000 3000 3000 3000 3000 3000
R 270 220 250 270 300 320 370 410 450
K BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 325 300 325 350 350 375 375 350 325
LENGTH 5640 5110 4370 4340 4390 4280 4370 4460 4550
B 2220 1760 980 920 920 780 790 820 840
D 3000 3000 3000 3000 3000 3000 3000 3000 3000
R 270 220 250 270 300 320 370 410 450
U BARS LENGTH 1310 1170 1290 1390 1520 1620 1830 2000 2200
C 950 810 930 1030 1160 1260 1470 1640 1840
T BARS SIZE 15 15 15 15 15 15 15 20 20
C/C 150 150 175 200 250 275 325 350 400
LENGTH 3000 3000 3000 3000 3000 3000 3000 3000 3000
R BARS # SETS 84 84 84 84 83 85 85 85 86
V BARS LENGTH 2005 2005 2020 2035 2100 2115 2140 2210 2240
B 225 225 240 255 320 335 360 430 460
S BARS LENGTH 360 360 360 360 460 460 460 560 560
W BARS # SETS 12 12 12 12 12 12 12 12 12

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 250 260 280 310 340 370 430 470 530
T 360 310 330 360 380 400 450 500 540
F 500 500 500 600 600 600 700 700 800
CONC. 5.2 5.0 5.3 5.9 6.3 6.7 7.8 8.4 9.5
FOOTING V ULS 284 265.9 288.2 329.4 373.4 423.2 525.3 634.1 753
REACTION V SLS 187.7 185.7 211.6 248.6 287 328.8 414.9 503.9 600.5
* H ULS 120.2 124.6 130.8 138.9 147.8 156.7 174.5 192.2 209.6
V 108 134 175 220 263 307 401 489 588
P BARS SIZE 25 25 20 20 20 20 25 25 25
C/C 200 225 150 150 150 150 225 200 200
LENGTH 5750 5760 5780 5810 5840 5870 5930 5970 6030
H BARS C/C - - - 375 400 400 375 375 350
LENGTH - - - 2820 2960 3060 3420 3440 3540
J BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 375 350 375 375 400 400 375 375 350
LENGTH 7580 7330 7360 5700 5670 5660 5570 5630 5660
B 3620 3450 3450 1740 1680 1640 1470 1450 1420
D 3500 3500 3500 3500 3500 3500 3500 3500 3500
R 290 240 260 290 310 330 380 430 470
K BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 375 350 375 375 400 400 375 375 350
LENGTH 6880 5840 5660 4990 4980 5000 4950 5060 5130
B 2920 1960 1750 1030 990 980 850 880 890
D 3500 3500 3500 3500 3500 3500 3500 3500 3500
R 290 240 260 290 310 330 380 430 470
U BARS LENGTH 1390 1270 1350 1480 1580 1680 1900 2100 2300
C 1030 910 990 1120 1220 1320 1540 1740 1940
T BARS SIZE 20 20 20 15 15 15 15 15 15
C/C 200 175 200 150 175 175 200 225 250
LENGTH 3500 3500 3500 3500 3500 3500 3500 3500 3500
R BARS # SETS 91 92 92 91 93 91 93 92 94
V BARS LENGTH 2015 2020 2030 2095 2110 2125 2205 2225 2305
B 235 240 250 315 330 345 425 445 525
S BARS LENGTH 360 360 360 460 460 460 560 560 660
W BARS # SETS 12 12 12 12 12 12 12 12 12

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 290 300 320 350 370 400 460 510 560
T 380 340 350 370 390 420 470 510 550
F 500 500 600 600 600 600 700 800 800
CONC. 6.0 5.8 6.3 6.7 7.0 7.5 8.6 9.6 10.3
FOOTING V ULS 297.8 277.9 300.4 343.6 386.4 438.3 542.4 655.7 773.5
REACTION V SLS 198.9 197.3 223.3 260.4 297.8 341.3 428.9 520.6 616.2
* H ULS 145.3 149.2 157.4 167.9 178 188.6 210.3 231.9 253.4
V 117 145 188 231 273 319 413 508 602
P BARS SIZE 20 20 20 20 20 20 20 25 25
C/C 150 150 150 150 150 150 150 225 200
LENGTH 5790 5800 5820 5850 5870 5900 5960 6010 6060
H BARS C/C - - - - 400 425 400 375 375
LENGTH - - - - 1900 2940 3060 3140 3500
J BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 425 425 425 425 400 425 400 375 375
LENGTH 8310 7870 7890 7920 6730 6260 6290 6320 6210
B 3820 3450 3450 3450 2230 1710 1660 1630 1460
D 4000 4000 4000 4000 4000 4000 4000 4000 4000
R 310 270 280 300 320 350 400 440 480
K BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 425 425 425 425 400 425 400 375 375
LENGTH 7940 6710 6420 6270 5810 5610 5690 5760 5690
B 3450 2290 1980 1800 1310 1060 1060 1070 940
D 4000 4000 4000 4000 4000 4000 4000 4000 4000
R 310 270 280 300 320 350 400 440 480
U BARS LENGTH 1510 1410 1460 1560 1650 1780 2000 2190 2370
C 1150 1050 1100 1200 1290 1420 1640 1830 2010
T BARS SIZE 20 20 20 20 20 15 15 15 15
C/C 175 175 175 200 200 150 150 150 175
LENGTH 4000 4000 4000 4000 4000 4000 4000 4000 4000
R BARS # SETS 97 100 97 97 99 99 101 100 100
V BARS LENGTH 2035 2040 2100 2115 2125 2140 2220 2295 2320
B 255 260 320 335 345 360 440 515 540
S BARS LENGTH 360 360 460 460 460 460 560 660 660
W BARS # SETS 12 12 12 12 12 12 12 12 12

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 310 310 310 320 310 340 400 470 550
T 360 320 340 360 380 400 450 490 540
F 600 600 600 600 600 600 600 700 800
CONC. 5.2 4.9 5.0 5.2 5.3 5.6 6.3 7.2 8.2
FOOTING V ULS 299.1 272.3 298.8 340.3 377.8 429.1 536.5 655.3 786.7
REACTION V SLS 195.6 190.5 218.9 255.6 289.3 332.4 422.4 519.8 626.2
* H ULS 61 57.1 55.8 56 58.3 58.3 74 102.5 135.2
V 112 140 181 224 264 310 404 505 612
P BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 225 225 225 225 200 200 200 200 200
LENGTH 6310 6310 6310 6320 6310 6340 6400 6470 6550
H BARS C/C 300 300 300 300 300 300 300 300 300
LENGTH 3420 3780 3800 3840 3860 3900 3960 4060 4160
J BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 300 300 300 300 300 300 300 300 300
LENGTH 4150 3940 3940 3950 3940 3960 4020 4060 4120
B 1690 1550 1520 1490 1450 1440 1420 1400 1380
D 2000 2000 2000 2000 2000 2000 2000 2000 2000
R 290 250 270 290 310 330 380 420 470
K BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 300 300 300 300 300 300 300 300 300
LENGTH 3440 3230 3230 3240 3250 3290 3400 3490 3590
B 980 840 810 780 760 770 800 830 850
D 2000 2000 2000 2000 2000 2000 2000 2000 2000
R 290 250 270 290 310 330 380 420 470
U BARS LENGTH 1480 1370 1420 1490 1540 1630 1860 2070 2330
C 1120 1010 1060 1130 1180 1270 1500 1710 1970
T BARS SIZE 20 20 20 20 20 20 20 20 20
C/C 450 450 450 450 450 450 450 400 350
LENGTH 2000 2000 2000 2000 2000 2000 2000 2000 2000
R BARS # SETS 74 74 74 74 74 74 73 75 77
V BARS LENGTH 2095 2095 2095 2100 2095 2110 2140 2225 2315
B 315 315 315 320 315 330 360 445 535
S BARS LENGTH 460 460 460 460 460 460 460 560 660
W BARS # SETS 12 12 12 12 12 12 12 12 12

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 310 310 310 280 310 340 410 460 530
T 360 320 330 350 380 410 460 500 540
F 600 600 600 500 600 600 700 700 800
CONC. 5.5 5.2 5.3 5.0 5.7 6.0 7.1 7.7 8.7
FOOTING V ULS 305 276.7 302.2 337 382.4 435.3 546 661 789
REACTION V SLS 199.4 194.3 221.7 252.9 293.1 337.6 430.2 524.6 628.3
* H ULS 81.3 78.9 79.9 83.6 87 90.4 95.9 101.6 104.9
V 116 144 185 220 269 315 415 510 615
P BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 200 225 225 200 200 175 200 175 175
LENGTH 6310 6310 6310 6280 6310 6340 6410 6460 6530
H BARS C/C 300 300 300 300 325 300 325 300 300
LENGTH 3160 3540 3780 3780 3840 3880 3960 4020 4100
J BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 300 300 300 300 325 300 325 300 300
LENGTH 4780 4560 4450 4430 4450 4470 4530 4580 4630
B 1820 1670 1540 1490 1460 1440 1420 1400 1390
D 2500 2500 2500 2500 2500 2500 2500 2500 2500
R 290 250 260 280 310 340 390 430 470
K BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 300 300 300 300 325 300 325 300 300
LENGTH 4050 3850 3740 3720 3760 3810 3920 4020 4100
B 1090 960 830 780 770 780 810 840 860
D 2500 2500 2500 2500 2500 2500 2500 2500 2500
R 290 250 260 280 310 340 390 430 470
U BARS LENGTH 1480 1370 1390 1410 1540 1660 1900 2090 2300
C 1120 1010 1030 1050 1180 1300 1540 1730 1940
T BARS SIZE 15 15 20 20 20 20 20 20 20
C/C 325 375 450 425 450 450 450 400 350
LENGTH 2500 2500 2500 2500 2500 2500 2500 2500 2500
R BARS # SETS 80 82 82 80 80 82 83 81 83
V BARS LENGTH 2095 2095 2095 2030 2095 2110 2195 2220 2305
B 315 315 315 250 315 330 415 440 525
S BARS LENGTH 460 460 460 360 460 460 560 560 660
W BARS # SETS 12 12 12 12 12 12 12 12 12

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 240 240 260 300 330 360 420 480 530
T 360 310 330 360 390 420 470 510 560
F 500 500 500 500 600 600 700 700 800
CONC. 5.1 4.7 5.0 5.5 6.2 6.6 7.6 8.4 9.4
FOOTING V ULS 297.9 270.5 298.4 346 392.2 445.9 555.8 674.7 799.7
REACTION V SLS 194 188.8 218.6 260.4 301.2 346.4 438.4 535.8 637.2
* H ULS 98.6 99.8 103.9 109.4 115.1 121 132.4 142.9 153.9
V 110 137 179 226 276 323 422 521 623
P BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 175 175 175 200 200 200 200 175 175
LENGTH 6240 6240 6260 6300 6330 6360 6420 6480 6530
H BARS C/C - 300 300 325 325 350 325 325 300
LENGTH - 2080 3320 3460 3780 3840 3920 4000 4020
J BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 325 300 300 325 325 350 325 325 300
LENGTH 7160 5720 5130 5120 5000 5020 5070 5110 5180
B 3700 2340 1720 1660 1500 1470 1440 1420 1410
D 3000 3000 3000 3000 3000 3000 3000 3000 3000
R 290 240 260 290 320 350 400 440 490
K BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 325 300 300 325 325 350 325 325 300
LENGTH 5660 4730 4420 4410 4320 4370 4470 4550 4670
B 2200 1350 1010 950 820 820 840 860 900
D 3000 3000 3000 3000 3000 3000 3000 3000 3000
R 290 240 260 290 320 350 400 440 490
U BARS LENGTH 1380 1240 1320 1460 1590 1720 1950 2140 2360
C 1020 880 960 1100 1230 1360 1590 1780 2000
T BARS SIZE 15 15 15 15 15 15 20 20 20
C/C 150 175 200 250 300 350 450 400 350
LENGTH 3000 3000 3000 3000 3000 3000 3000 3000 3000
R BARS # SETS 86 84 86 86 88 88 87 87 89
V BARS LENGTH 2010 2010 2020 2040 2105 2120 2200 2230 2305
B 230 230 240 260 325 340 420 450 525
S BARS LENGTH 360 360 360 360 460 460 560 560 660
W BARS # SETS 12 12 12 12 12 12 12 12 12

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 260 270 290 340 370 400 470 510 570
T 380 340 350 380 410 430 480 530 580
F 500 500 500 600 600 600 700 800 800
CONC. 5.6 5.4 5.7 6.5 7.0 7.3 8.5 9.5 10.4
FOOTING V ULS 306.4 282.1 310.1 360.8 408.1 461.6 576.2 697.5 823.2
REACTION V SLS 201.8 198.6 228.2 272.6 314.4 359.3 455.2 551.1 656.5
* H ULS 120.7 123 128.9 136.7 144.4 152.2 167.8 183.7 198.9
V 117 146 189 240 288 335 437 537 641
P BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 200 200 200 225 225 225 200 200 200
LENGTH 6260 6270 6290 6340 6370 6400 6470 6510 6570
H BARS C/C - - 350 350 350 350 350 325 325
LENGTH - - 3120 3400 3460 3820 3940 3940 4020
J BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 325 350 350 350 350 350 350 325 325
LENGTH 7690 7620 5770 5700 5710 5580 5610 5680 5730
B 3700 3700 1830 1710 1680 1510 1470 1460 1430
D 3500 3500 3500 3500 3500 3500 3500 3500 3500
R 310 270 280 310 340 360 410 460 510
K BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 325 350 350 350 350 350 350 325 325
LENGTH 6570 5920 5040 5020 5050 4940 5020 5140 5240
B 2580 2000 1100 1030 1020 870 880 920 940
D 3500 3500 3500 3500 3500 3500 3500 3500 3500
R 310 270 280 310 340 360 410 460 510
U BARS LENGTH 1460 1370 1420 1580 1700 1800 2040 2240 2470
C 1100 1010 1060 1220 1340 1440 1680 1880 2110
T BARS SIZE 20 20 15 15 15 15 15 20 20
C/C 175 200 150 175 200 225 275 300 325
LENGTH 3500 3500 3500 3500 3500 3500 3500 3500 3500
R BARS # SETS 94 94 94 96 94 94 95 97 97
V BARS LENGTH 2020 2025 2035 2110 2125 2140 2225 2295 2325
B 240 245 255 330 345 360 445 515 545
S BARS LENGTH 360 360 360 460 460 460 560 660 660
W BARS # SETS 12 12 12 12 12 12 12 12 12

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 300 300 320 360 390 420 480 540 600
T 400 360 370 390 420 440 500 550 590
F 500 500 600 600 600 700 700 800 800
CONC. 6.4 6.1 6.6 7.1 7.6 8.2 9.3 10.4 11.3
FOOTING V ULS 316.7 290.6 322.6 371.3 419.3 473.6 588.5 712.6 844.4
REACTION V SLS 213.3 208.2 238.7 281.3 323.7 369.3 465.4 567.1 672.8
* H ULS 144.1 148 155.8 165.5 175 185 205 224.9 244.5
V 126 155 201 249 297 347 448 552 656
P BARS SIZE 25 20 20 20 25 25 25 25 25
C/C 225 150 150 150 225 225 225 200 200
LENGTH 6300 6300 6320 6360 6390 6420 6480 6540 6600
H BARS C/C - - - 375 375 375 375 350 325
LENGTH - - - 2260 3300 3460 3500 3920 4000
J BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 400 375 375 375 375 375 375 350 325
LENGTH 8380 8160 8170 6790 6320 6280 6360 6230 6280
B 3860 3700 3700 2290 1770 1700 1680 1480 1460
D 4000 4000 4000 4000 4000 4000 4000 4000 4000
R 330 290 300 320 350 370 430 480 520
K BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 400 375 375 375 375 375 375 350 325
LENGTH 7710 6700 6430 5840 5650 5650 5770 5710 5800
B 3190 2240 1960 1340 1100 1070 1090 960 980
D 4000 4000 4000 4000 4000 4000 4000 4000 4000
R 330 290 300 320 350 370 430 480 520
U BARS LENGTH 1580 1460 1520 1630 1760 1860 2120 2340 2540
C 1220 1100 1160 1270 1400 1500 1760 1980 2180
T BARS SIZE 20 20 20 15 15 15 15 15 15
C/C 175 175 175 150 150 150 175 200 200
LENGTH 4000 4000 4000 4000 4000 4000 4000 4000 4000
R BARS # SETS 102 100 100 102 102 102 101 103 105
V BARS LENGTH 2040 2040 2100 2120 2135 2200 2230 2310 2340
B 260 260 320 340 355 420 450 530 560
S BARS LENGTH 360 360 460 460 460 560 560 660 660
W BARS # SETS 12 12 12 12 12 12 12 12 12

DETAILING MANUAL
DIVISION 6 – RIGID FRAME BOX CULVERTS
August 2003

2003 08 08 RIGID FRAME BOX CULVERTS Page 73
6 RIGID FRAME BOX CULVERTS
Dimensions and detailing information for standard rigid frame box culverts
are given in Figure 6.1(a). Construction joints indicated are optional and
are provided for the contractor's convenience. Note that both the
horizontal and vertical dimensions of all haunches are equal to the
thickness of the top slab of the culvert.
Reinforcing details for standard rigid frame box culverts are shown in
Figure 6.1(b). Table 6-1 identifies the bar sizes and shapes used for these
culverts.
The detailing tables should be read in conjunction with Figures 6.1(a) and
(b) and Table 6-1.
Details of apron walls, header walls and retaining walls are provided in
Division 8.
The design assumption and parameters, as well as the load cases and
combinations, as per CHBDC are summarized in Appendix E
(Section 9.5).
6.2 FOUNDATION INVESTIGATION
For foundation investigation requirements of rigid frame box culverts, refer
to Section 5.2.1.

FIGURE 6.1(a) RIGID FRAME BOX CULVERT DIMENSIONS
SPAN
W
OPTIONAL
CONSTRUCTION
JOINT (TYP)
T
T
HEIGHT
T
B
FIGURE 6.1(b) RIGID FRAME BOX CULVERT REINFORCEMENT
P Bars Staggered
H Bars
J & K Bars
Alternating
U Bars @ 300
T Bars @ 300
S Bars @ 300
100 25 Cover
Q Bars Staggered
R Bars @ 300
R Bars @ 300
H Bars J & K Bars
Alternating
R
Bars
@
300

B
D*
R = RADIUS
C 45°
45°
180
180
230
190
225
C*
P BARS STRAIGHT BOTTOM OF TOP SLAB
STAGGERED
Q BARS STRAIGHT
STAGGERED
TOP OF BOTTOM SLAB
J & K BARS J BARS
S BARS 15M BARS
HAUNCH
M BARS STRAIGHT 15M BARS, APRON WALL
HEADER WALL
15M BARS
Z BARS
H BARS STRAIGHT
TOP OF TOP SLAB &
15M BARS
BOTTOM OF BOTTOM SLAB
(AT BOTTOM)
T BARS STRAIGHT 15M BARS
INSIDE FACE OF WALLS
180 180
U BARS
45° C 45°
(AT TOP)
15M BARS
HAUNCH
R BARS STRAIGHT 15M BARS
LONGITUDINAL
500
1080*
L BARS 15M BARS
DOWELS TO APRON WALL
Y BARS STRAIGHT 15M BARS, HEADER WALL
ALTERNATE WITH
K BARS
-represents vertical dimension

6.3 DETAILING OF BOX CULVERT DRAWINGS
The following is the procedure used for completing the structural standard
drawing for standard rigid frame box culverts, SS114-2, with no skewed
ends, retaining walls or other special features:
- Obtain culvert size, length, and height of fill from “Design Data
Form for Concrete Culverts”.
- Select appropriate standard drawing for rigid frame box culvert.
- Determine from “Design Data Form for Concrete Culverts”
whether culvert is extension or not:
side of section 1 to a solid line and label - "END OF
EXISTING CULVERT" Insert length of culvert extension on
the horizontal dimension line:
e.g. 9 m EXTN RT
11 m EXTN LT
If culvert is not an extension, label centreline "Centre-line
Highway" and add culvert length each side of Centre-line
Highway
e.g. 16 m RT
13 m LT
of culvert.
haunch, bottom slab and wall on "Typical Culvert Section" detail.
- Insert bar size and/or spacing for H, J, K, P, and Q bars where
required on all details. Note that P and Q bar spacing is
specified at mid-span. Insert Y bar size on Detail B.
- Insert dimensions on Section 2 for layout of P and Q bars, noting
that the smaller dimension is half the wall thickness and that the
larger dimension is the P bar or Q bar length.

WARNING NOTE: a dimension is required on Section 1 to show the
actual distance between any J bar and the adjacent K bar. This is
necessary to avoid confusion about the spacing of alternating bars,
since the space between adjacent bars is 1/2 of the J spacing.
i.e., if J bar spacing is 300 mm and
K bar spacing is 300 mm
then distance between adjacent bars is 150 mm.
THIS IS AN EXTREMELY IMPORTANT POINT.
- Complete steel bar table for culvert, apron wall and header wall,
where applicable.
- Add additional P Bar at each end of culvert if no header wall is
required.
- Add header walls where required as specified in Sections 4.2.6.
- Add adjustment to steel quantity for R bar laps.
- Add apron wall quantities.
- Add header wall quantities, where applicable.
- Insert total quantities in "Culvert Quantities" table on standard
drawing.
according to 4.3.1.
Spacing, bar length, and bar bending dimensions are available from the
individual culvert detailing tables at the end of this division.
The number of H, J, K, P, Q, S, T and U bars required can be calculated
using the expression given in Division 8. This procedure considers only
one bar per cross-section, therefore, the number of S, T and U bars must
be doubled, and the number of J and K bars must be quadrupled.

For R bars the number of sets of bars is available on the detailing tables;
the number of bars per set and bar length in Division 8.
For H bars the spacing and length of bar are given in the detailing tables,
when these bars are required.
6.3.3 STEEL TABLE FOR APRON WALL AND HEADER WALL
The length and number of L, M, Y and Z bars required for apron and
header walls are as given in Division 8.
Modification of these quantities is required for culverts with skewed ends.
The additional volume of concrete required for apron and header walls is
discussed in Division 8.
Modification of these quantities is required for culverts with skewed ends.
Complete the quantity table. Concrete and steel quantities should be the
total quantity for the complete length of culvert including apron wall and
header wall, where applicable.

6.4 DETAILING TABLES
The following pages contain the detailing tables. These tables list various
culvert dimensions, concrete and reinforcing steel quantities, and
reinforcing steel detailing information.
All dimensions, spacings and lengths given are in millimetres.
Steel quantities given are in kilograms, per metre length of culvert.
Concrete quantities given are in cubic metres, per metre length of culvert.

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 210 210 210 210 210 210 220 220 240
T 220 220 220 220 220 220 220 220 240
B 220 220 230 230 230 230 230 250 280
CONC. 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.8 2
P BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 325 375 400 400 375 325 275 250 225
LENGTH 2210 2210 2210 2210 2210 2210 2220 2220 2240
H BARS C/C 525 630 630 625 600 525 450 375 350
LENGTH 1070 1170 1230 1250 1270 1270 1290 1290 1290
J BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 525 630 630 625 600 525 450 375 350
LENGTH 2190 2140 2110 2100 2090 2090 2090 2090 2120
B 910 860 830 820 810 810 810 810 810
D 1050 1050 1050 1050 1050 1050 1050 1050 1050
R 145 145 145 145 145 145 145 145 165
K BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 525 630 630 625 600 525 450 375 350
LENGTH 1770 1710 1700 1690 1680 1680 1680 1680 1740
B 490 430 420 410 400 400 400 400 430
D 1050 1050 1050 1050 1050 1050 1050 1050 1050
R 145 145 145 145 145 145 145 145 165
S BARS LENGTH 900 900 910 910 910 910 930 960 1050
C 540 540 550 550 550 550 570 600 690
T BARS LENGTH 1250 1250 1250 1250 1250 1250 1250 1250 1250
U BARS LENGTH 940 940 940 940 940 940 960 960 1040
C 580 580 580 580 580 580 600 600 680
Q BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 300 350 350 325 300 275 250 200 200
LENGTH 2210 2210 2210 2210 2210 2210 2220 2220 2240
R BARS # SETS 54 54 54 54 54 54 54 54 58

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 210 210 210 210 210 210 220 220 240
T 220 220 220 220 220 220 220 220 240
B 220 220 230 230 230 230 230 250 280
CONC. 1.8 1.8 1.8 1.8 1.8 1.8 1.9 1.9 2.1
P BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 300 350 375 350 325 300 250 225 225
LENGTH 2210 2210 2210 2210 2210 2210 2220 2220 2240
H BARS C/C 575 630 630 630 630 600 475 400 400
LENGTH 730 1070 1170 1210 1210 1230 1250 1270 1270
J BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 575 630 630 630 630 600 475 400 400
LENGTH 2480 2310 2260 2240 2240 2230 2230 2220 2250
B 1080 910 860 840 840 830 830 820 820
D 1170 1170 1170 1170 1170 1170 1170 1170 1170
R 145 145 145 145 145 145 145 145 165
K BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 575 630 630 630 630 600 475 400 400
LENGTH 2050 1890 1850 1830 1820 1820 1820 1820 1880
B 650 490 450 430 420 420 420 420 450
D 1170 1170 1170 1170 1170 1170 1170 1170 1170
R 145 145 145 145 145 145 145 145 165
S BARS LENGTH 900 900 910 910 910 910 930 960 1050
C 540 540 550 550 550 550 570 600 690
T BARS LENGTH 1500 1500 1500 1500 1500 1500 1500 1500 1500
U BARS LENGTH 940 940 940 940 940 940 960 960 1040
C 580 580 580 580 580 580 600 600 680
Q BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 275 325 325 300 275 250 225 175 175
LENGTH 2210 2210 2210 2210 2210 2210 2220 2220 2240
R BARS # SETS 56 56 56 56 56 56 56 56 60

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 210 210 210 210 210 210 220 220 240
T 220 220 220 220 220 220 220 220 240
B 220 220 230 230 230 230 230 250 280
CONC. 1.9 1.9 1.9 1.9 1.9 1.9 2 2 2.2
P BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 275 325 350 325 325 275 250 200 200
LENGTH 2210 2210 2210 2210 2210 2210 2220 2220 2240
H BARS C/C - 630 630 630 630 630 525 450 425
LENGTH - 810 1070 1110 1130 1150 1190 1190 1230
J BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 625 630 630 630 630 630 525 450 425
LENGTH 2950 2570 2440 2420 2410 2400 2390 2390 2400
B 1420 1040 910 890 880 870 860 860 840
D 1300 1300 1300 1300 1300 1300 1300 1300 1300
R 145 145 145 145 145 145 145 145 165
K BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 625 630 630 630 630 630 525 450 425
LENGTH 2090 2140 2030 2010 2000 1990 1970 1980 2040
B 560 610 500 480 470 460 440 450 480
D 1300 1300 1300 1300 1300 1300 1300 1300 1300
R 145 145 145 145 145 145 145 145 165
S BARS LENGTH 900 900 910 910 910 910 930 960 1050
C 540 540 550 550 550 550 570 600 690
T BARS LENGTH 1750 1750 1750 1750 1750 1750 1750 1750 1750
U BARS LENGTH 940 940 940 940 940 940 960 960 1040
C 580 580 580 580 580 580 600 600 680
Q BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 250 300 300 275 275 250 200 175 150
LENGTH 2210 2210 2210 2210 2210 2210 2220 2220 2240
R BARS # SETS 60 60 60 60 60 60 60 60 64

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 210 210 210 210 210 210 220 220 240
T 220 220 220 220 220 220 220 220 240
B 220 220 230 230 230 230 230 250 280
CONC. 2 2 2 2 2 2 2.1 2.1 2.4
P BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 250 300 325 325 300 275 225 200 200
LENGTH 2210 2210 2210 2210 2210 2210 2220 2220 2240
H BARS C/C - - 630 630 630 630 550 475 450
LENGTH - - 770 930 970 1030 1090 1110 1130
J BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 630 630 630 630 630 630 550 475 450
LENGTH 3070 3070 2710 2630 2610 2580 2560 2550 2570
B 1420 1420 1060 980 960 930 910 900 890
D 1420 1420 1420 1420 1420 1420 1420 1420 1420
R 145 145 145 145 145 145 145 145 165
K BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 630 630 630 630 630 630 550 475 450
LENGTH 2330 2240 2300 2220 2190 2170 2150 2160 2210
B 680 590 650 570 540 520 500 510 530
D 1420 1420 1420 1420 1420 1420 1420 1420 1420
R 145 145 145 145 145 145 145 145 165
S BARS LENGTH 900 900 910 910 910 910 930 960 1050
C 540 540 550 550 550 550 570 600 690
T BARS LENGTH 2000 2000 2000 2000 2000 2000 2000 2000 2000
U BARS LENGTH 940 940 940 940 940 940 960 960 1040
C 580 580 580 580 580 580 600 600 680
Q BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 225 275 275 275 250 225 200 150 150
LENGTH 2210 2210 2210 2210 2210 2210 2220 2220 2240
R BARS # SETS 64 64 64 64 64 64 64 64 68

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 210 210 210 210 220 220 230 240 260
T 220 220 220 220 220 220 230 240 270
B 220 220 240 240 240 240 260 280 320
CONC. 1.9 1.9 2 2 2 2 2.1 2.3 2.6
P BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 225 275 300 275 275 250 200 175 175
LENGTH 2710 2710 2710 2710 2720 2720 2730 2740 2760
H BARS C/C 325 400 425 400 375 325 300 375 350
LENGTH 1490 1590 1650 1670 1690 1690 1710 1270 1250
J BARS SIZE 15 15 15 15 15 15 15 20 20
C/C 325 400 425 400 375 325 300 375 350
LENGTH 2230 2180 2150 2140 2140 2140 2140 2520 2570
B 950 900 870 860 860 860 850 1070 1070
D 1050 1050 1050 1050 1050 1050 1050 1190 1190
R 145 145 145 145 145 145 155 165 195
K BARS SIZE 15 15 15 15 15 15 15 20 20
C/C 325 400 425 400 375 325 300 375 350
LENGTH 1810 1760 1730 1720 1720 1720 1740 1910 1990
B 530 480 450 440 440 440 450 460 490
D 1050 1050 1050 1050 1050 1050 1050 1190 1190
R 145 145 145 145 145 145 155 165 195
S BARS LENGTH 900 900 930 930 940 940 1000 1050 1180
C 540 540 570 570 580 580 640 690 820
T BARS LENGTH 1250 1250 1250 1250 1250 1250 1250 1250 1250
U BARS LENGTH 940 940 940 940 960 960 1000 1040 1150
C 580 580 580 580 600 600 640 680 790
Q BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 225 250 250 250 225 200 175 150 150
LENGTH 2710 2710 2710 2710 2720 2720 2730 2740 2760
R BARS # SETS 60 60 60 60 60 60 64 64 64

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 210 210 210 210 220 220 230 240 280
T 220 220 220 220 220 220 230 240 290
B 220 220 240 240 240 240 260 280 330
CONC. 2 2 2.1 2.1 2.1 2.1 2.2 2.4 2.9
P BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 200 250 275 250 250 225 200 175 175
LENGTH 2710 2710 2710 2710 2720 2720 2730 2740 2780
H BARS C/C 350 450 450 425 400 375 325 400 300
LENGTH 1450 1590 1650 1670 1690 1690 1710 1290 1690
J BARS SIZE 15 15 15 15 15 15 15 20 15
C/C 350 450 450 425 400 375 325 400 300
LENGTH 2370 2300 2270 2260 2260 2260 2260 2630 2360
B 970 900 870 860 860 860 850 1060 850
D 1170 1170 1170 1170 1170 1170 1170 1310 1170
R 145 145 145 145 145 145 155 165 215
K BARS SIZE 15 15 15 15 15 15 15 20 15
C/C 350 450 450 425 400 375 325 400 300
LENGTH 1940 1880 1860 1850 1850 1840 1860 2030 2020
B 540 480 460 450 450 440 450 460 510
D 1170 1170 1170 1170 1170 1170 1170 1310 1170
R 145 145 145 145 145 145 155 165 215
S BARS LENGTH 900 900 930 930 940 940 1000 1050 1250
C 540 540 570 570 580 580 640 690 890
T BARS LENGTH 1500 1500 1500 1500 1500 1500 1500 1500 1500
U BARS LENGTH 940 940 940 940 960 960 1000 1040 1240
C 580 580 580 580 600 600 640 680 880
Q BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 200 225 225 225 200 175 150 150 150
LENGTH 2710 2710 2710 2710 2720 2720 2730 2740 2780
R BARS # SETS 62 62 62 62 62 62 66 66 66

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 220 220 220 220 230 230 240 260 280
T 220 220 220 220 230 230 240 260 290
B 220 220 240 240 240 240 270 320 340
QUANTITIES STEEL 272 247.4 244 249.6 260.9 274.9 295.4 310.2 314.9
CONC. 2.2 2.2 2.2 2.2 2.3 2.3 2.5 2.8 3.1
P BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 200 250 250 250 250 225 200 175 175
LENGTH 2720 2720 2720 2720 2730 2730 2740 2760 2780
H BARS C/C 400 475 500 475 450 400 350 325 325
LENGTH 1310 1530 1610 1650 1650 1670 1690 1690 1670
J BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 400 475 500 475 450 400 350 325 325
LENGTH 2580 2470 2430 2410 2420 2410 2420 2450 2500
B 1050 940 900 880 880 870 860 860 860
D 1300 1300 1300 1300 1300 1300 1300 1300 1300
R 145 145 145 145 155 155 165 185 215
K BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 400 475 500 475 450 400 350 325 325
LENGTH 2160 2050 2030 2010 2020 2010 2040 2100 2170
B 630 520 500 480 480 470 480 510 530
D 1300 1300 1300 1300 1300 1300 1300 1300 1300
R 145 145 145 145 155 155 165 185 215
S BARS LENGTH 910 910 940 940 970 970 1040 1170 1270
C 550 550 580 580 610 610 680 810 910
T BARS LENGTH 1750 1750 1750 1750 1750 1750 1750 1750 1750
U BARS LENGTH 960 960 960 960 1000 1000 1040 1130 1240
C 600 600 600 600 640 640 680 770 880
Q BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 175 225 225 200 200 175 150 150 150
LENGTH 2720 2720 2720 2720 2730 2730 2740 2760 2780
R BARS # SETS 66 66 66 66 70 70 70 70 70

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 220 220 220 220 230 230 240 260 270
T 220 220 220 220 230 230 240 260 290
B 220 220 240 240 240 250 270 330 350
QUANTITIES STEEL 279.8 257.8 253.1 260.4 271.4 281 305.3 313.6 336.4
CONC. 2.3 2.3 2.3 2.3 2.4 2.4 2.6 3 3.2
P BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 200 225 250 225 225 200 175 175 150
LENGTH 2720 2720 2720 2720 2730 2730 2740 2760 2770
H BARS C/C - 525 525 500 475 450 375 350 325
LENGTH - 1370 1530 1570 1590 1610 1630 1630 1630
J BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 425 525 525 500 475 450 375 350 325
LENGTH 3320 2670 2590 2570 2570 2560 2570 2600 2630
B 1670 1020 940 920 910 900 890 890 870
D 1420 1420 1420 1420 1420 1420 1420 1420 1420
R 145 145 145 145 155 155 165 185 215
K BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 425 525 525 500 475 450 375 350 325
LENGTH 2340 2250 2190 2170 2170 2170 2180 2260 2330
B 690 600 540 520 510 510 500 550 570
D 1420 1420 1420 1420 1420 1420 1420 1420 1420
R 145 145 145 145 155 155 165 185 215
S BARS LENGTH 910 910 940 940 970 980 1040 1180 1270
C 550 550 580 580 610 620 680 820 910
T BARS LENGTH 2000 2000 2000 2000 2000 2000 2000 2000 2000
U BARS LENGTH 960 960 960 960 1000 1000 1040 1130 1220
C 600 600 600 600 640 640 680 770 860
Q BARS SIZE 15 15 15 15 15 15 15 15 20
C/C 175 200 225 200 200 175 150 150 200
LENGTH 2720 2720 2720 2720 2730 2730 2740 2760 2770
R BARS # SETS 70 70 70 70 74 74 74 72 74

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 230 230 230 240 250 250 270 300 320
T 230 230 230 240 250 250 270 300 340
B 250 250 250 250 260 260 310 370 390
QUANTITIES STEEL 321.8 293.2 292.3 296.9 300.5 328.5 343 372.7 390.7
CONC. 2.3 2.3 2.3 2.4 2.5 2.5 2.9 3.3 3.7
P BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 200 225 250 250 225 200 200 175 175
LENGTH 3230 3230 3230 3240 3250 3250 3270 3300 3320
H BARS C/C 375 300 300 300 300 375 350 325 300
LENGTH 1450 1970 2030 2070 2090 1670 1670 1650 1630
J BARS SIZE 20 15 15 15 15 20 20 20 20
C/C 375 300 300 300 300 375 350 325 300
LENGTH 2660 2260 2230 2230 2230 2580 2620 2670 2730
B 1230 970 940 920 910 1120 1120 1130 1120
D 1190 1050 1050 1050 1050 1190 1190 1190 1190
R 155 155 155 165 175 175 195 225 265
K BARS SIZE 20 15 15 15 15 20 20 20 20
C/C 375 300 300 300 300 375 350 325 300
LENGTH 2040 1850 1810 1830 1840 1980 2040 2120 2230
B 610 560 520 520 520 520 540 580 620
D 1190 1050 1050 1050 1050 1190 1190 1190 1190
R 155 155 155 165 175 175 195 225 265
S BARS LENGTH 980 980 980 1010 1050 1050 1180 1350 1460
C 620 620 620 650 690 690 820 990 1100
T BARS LENGTH 1250 1250 1250 1250 1250 1250 1250 1250 1250
U BARS LENGTH 1000 1000 1000 1040 1080 1080 1170 1290 1440
C 640 640 640 680 720 720 810 930 1080
Q BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 225 250 225 200 200 175 175 150 150
LENGTH 3230 3230 3230 3240 3250 3250 3270 3300 3320
R BARS # SETS 70 70 70 70 70 70 70 72 70

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 230 230 230 230 240 240 260 280 320
T 230 230 230 240 250 250 260 280 340
B 230 230 250 250 260 260 310 370 390
QUANTITIES STEEL 331.9 299.7 299.5 306.8 317 339.2 361.2 390 398.7
CONC. 2.4 2.4 2.5 2.5 2.6 2.6 2.9 3.3 3.8
P BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 175 200 225 200 200 175 175 150 150
LENGTH 3230 3230 3230 3230 3240 3240 3260 3280 3320
H BARS C/C 400 325 325 325 300 400 350 325 325
LENGTH 1430 1990 2050 2090 2090 1670 1670 1690 1650
J BARS SIZE 20 15 15 15 15 20 20 20 20
C/C 400 325 325 325 300 400 350 325 325
LENGTH 2790 2370 2340 2330 2340 2690 2720 2740 2840
B 1240 960 930 900 900 1110 1120 1110 1110
D 1310 1170 1170 1170 1170 1310 1310 1310 1310
R 155 155 155 165 175 175 185 205 265
K BARS SIZE 20 15 15 15 15 20 20 20 20
C/C 400 325 325 325 300 400 350 325 325
LENGTH 2160 1960 1920 1930 1950 2080 2120 2180 2330
B 610 550 510 500 510 500 520 550 600
D 1310 1170 1170 1170 1170 1310 1310 1310 1310
R 155 155 155 165 175 175 185 205 265
S BARS LENGTH 960 960 980 1000 1040 1040 1150 1300 1460
C 600 600 620 640 680 680 790 940 1100
T BARS LENGTH 1500 1500 1500 1500 1500 1500 1500 1500 1500
U BARS LENGTH 1000 1000 1000 1030 1070 1070 1130 1210 1440
C 640 640 640 670 710 710 770 850 1080
Q BARS SIZE 15 15 15 15 15 15 15 20 20
C/C 175 200 200 175 175 150 150 200 200
LENGTH 3230 3230 3230 3230 3240 3240 3260 3280 3320
R BARS # SETS 70 70 72 72 72 72 72 74 72

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 220 220 220 230 230 240 240 260 290
T 220 220 230 230 240 250 250 280 330
B 220 220 240 240 250 260 310 360 410
QUANTITIES STEEL 352.2 316.2 308.3 319.7 329.2 339.8 388.6 396 409.1
CONC. 2.4 2.4 2.5 2.5 2.6 2.7 2.9 3.3 3.9
P BARS SIZE 15 15 15 15 15 15 15 20 20
C/C 150 175 200 200 175 175 150 200 200
LENGTH 3220 3220 3220 3230 3230 3240 3240 3260 3290
H BARS C/C 400 325 350 325 325 300 350 350 350
LENGTH 1390 1970 2070 2090 2110 2110 1670 1670 1650
J BARS SIZE 20 15 15 15 15 15 20 20 20
C/C 400 325 350 325 325 300 350 350 350
LENGTH 2930 2500 2450 2450 2450 2460 2820 2860 2930
B 1260 970 910 910 890 890 1110 1100 1090
D 1440 1300 1300 1300 1300 1300 1440 1440 1440
R 145 145 155 155 165 175 175 205 255
K BARS SIZE 20 15 15 15 15 15 20 20 20
C/C 400 325 350 325 325 300 350 350 350
LENGTH 2290 2080 2050 2050 2060 2080 2220 2300 2430
B 620 550 510 510 500 510 510 540 590
D 1440 1300 1300 1300 1300 1300 1440 1440 1440
R 145 145 155 155 165 175 175 205 255
S BARS LENGTH 910 910 960 970 1000 1040 1110 1250 1440
C 550 550 600 610 640 680 750 890 1080
T BARS LENGTH 1750 1750 1750 1750 1750 1750 1750 1750 1750
U BARS LENGTH 960 960 980 1000 1030 1070 1070 1180 1370
C 600 600 620 640 670 710 710 820 1010
Q BARS SIZE 15 15 15 15 15 15 20 20 20
C/C 150 175 175 175 150 150 175 175 175
LENGTH 3220 3220 3220 3230 3230 3240 3240 3260 3290
R BARS # SETS 72 72 74 76 76 76 76 74 76

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 220 220 220 230 230 240 240 270 300
T 220 230 230 230 240 250 250 280 330
B 220 230 240 240 250 260 320 360 430
CONC. 2.5 2.6 2.6 2.7 2.7 2.9 3.1 3.5 4.2
P BARS SIZE 15 15 15 15 15 15 20 20 20
C/C 150 175 175 175 175 150 200 200 200
LENGTH 3220 3220 3220 3230 3230 3240 3240 3270 3300
H BARS C/C 300 375 375 350 325 325 375 375 375
LENGTH 1690 1910 2010 2050 2070 2070 1650 1670 1630
J BARS SIZE 15 15 15 15 15 15 20 20 20
C/C 300 375 375 350 325 325 375 375 375
LENGTH 2760 2650 2600 2590 2590 2600 2950 2990 3070
B 1110 990 940 930 910 910 1120 1110 1110
D 1420 1420 1420 1420 1420 1420 1560 1560 1560
R 145 155 155 155 165 175 175 205 255
K BARS SIZE 15 15 15 15 15 15 20 20 20
C/C 300 375 375 350 325 325 375 375 375
LENGTH 2320 2230 2200 2190 2200 2220 2360 2450 2590
B 670 570 540 530 520 530 530 570 630
D 1420 1420 1420 1420 1420 1420 1560 1560 1560
R 145 155 155 155 165 175 175 205 255
S BARS LENGTH 910 940 960 970 1000 1040 1130 1270 1480
C 550 580 600 610 640 680 770 910 1120
T BARS LENGTH 2000 2000 2000 2000 2000 2000 2000 2000 2000
U BARS LENGTH 960 980 980 1000 1030 1070 1070 1200 1380
C 600 620 620 640 670 710 710 840 1020
Q BARS SIZE 20 15 15 15 15 20 20 20 20
C/C 200 150 150 150 150 200 175 175 175
LENGTH 3220 3220 3220 3230 3230 3240 3240 3270 3300
R BARS # SETS 76 78 78 80 80 78 78 80 80

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 230 230 230 240 250 260 300 330 370
T 250 250 240 240 250 260 300 340 380
B 250 250 270 270 270 290 320 400 460
QUANTITIES STEEL 397.8 362.1 375 379.5 396.3 399.1 437.5 463.4 495.3
CONC. 2.7 2.7 2.7 2.7 2.8 3 3.5 4.1 4.8
P BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 150 200 200 175 175 175 175 150 150
LENGTH 3730 3730 3730 3740 3750 3760 3800 3830 3870
H BARS C/C 300 350 325 325 300 300 450 425 400
LENGTH 1850 1930 1990 2010 2030 2050 1630 1610 1590
J BARS SIZE 20 20 20 20 20 20 25 25 25
C/C 300 350 325 325 300 300 450 425 400
LENGTH 2720 2680 2650 2650 2650 2660 3060 3130 3200
B 1260 1220 1200 1200 1190 1180 1390 1390 1400
D 1190 1190 1190 1190 1190 1190 1320 1320 1320
R 175 175 165 165 175 185 225 265 305
K BARS SIZE 20 20 20 20 20 20 25 25 25
C/C 300 350 325 325 300 300 450 425 400
LENGTH 2120 2080 2040 2030 2040 2070 2290 2420 2540
B 660 620 590 580 580 590 620 680 740
D 1190 1190 1190 1190 1190 1190 1320 1320 1320
R 175 175 165 165 175 185 225 265 305
S BARS LENGTH 1010 1010 1030 1040 1070 1130 1280 1490 1690
C 650 650 670 680 710 770 920 1130 1330
T BARS LENGTH 1250 1250 1250 1250 1250 1250 1250 1250 1250
U BARS LENGTH 1050 1050 1030 1040 1080 1130 1290 1450 1620
C 690 690 670 680 720 770 930 1090 1260
Q BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 175 175 175 175 150 150 150 150 150
LENGTH 3730 3730 3730 3740 3750 3760 3800 3830 3870
R BARS # SETS 76 76 78 78 76 76 80 78 82

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 230 230 230 240 250 260 300 330 370
T 250 240 240 240 250 260 300 340 380
B 250 250 270 270 270 290 330 400 480
CONC. 2.8 2.7 2.8 2.9 3 3.1 3.7 4.3 5
P BARS SIZE 15 15 15 15 15 15 15 15 15
C/C 150 175 175 175 175 150 150 150 150
LENGTH 3730 3730 3730 3740 3750 3760 3800 3830 3870
H BARS C/C 300 350 350 350 325 300 300 450 425
LENGTH 1870 1970 2010 2050 2070 2070 2090 1650 1630
J BARS SIZE 20 20 20 20 20 20 20 25 25
C/C 300 350 350 350 325 300 300 450 425
LENGTH 2830 2780 2760 2750 2750 2770 2820 3240 3310
B 1250 1210 1190 1180 1170 1170 1160 1370 1380
D 1310 1310 1310 1310 1310 1310 1310 1450 1450
R 175 165 165 165 175 185 225 265 305
K BARS SIZE 20 20 20 20 20 20 20 25 25
C/C 300 350 350 350 325 300 300 450 425
LENGTH 2230 2170 2140 2140 2140 2170 2270 2520 2650
B 650 600 570 570 560 570 610 650 720
D 1310 1310 1310 1310 1310 1310 1310 1450 1450
R 175 165 165 165 175 185 225 265 305
S BARS LENGTH 1010 1000 1030 1040 1070 1130 1300 1490 1720
C 650 640 670 680 710 770 940 1130 1360
T BARS LENGTH 1500 1500 1500 1500 1500 1500 1500 1500 1500
U BARS LENGTH 1050 1030 1030 1040 1080 1130 1290 1450 1620
C 690 670 670 680 720 770 930 1090 1260
Q BARS SIZE 15 15 15 15 15 20 20 20 20
C/C 150 175 150 150 150 200 200 200 200
LENGTH 3730 3730 3730 3740 3750 3760 3800 3830 3870
R BARS # SETS 78 80 80 80 78 78 80 80 84

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 230 230 230 240 250 260 300 330 370
T 250 240 240 240 250 260 300 340 380
B 250 250 270 270 270 290 320 400 480
QUANTITIES STEEL 423.8 396.6 390.6 411.8 409.8 431 442.9 472.5 490
CONC. 2.9 2.9 2.9 3 3.1 3.3 3.8 4.5 5.2
P BARS SIZE 20 15 15 15 15 15 15 20 20
C/C 200 150 175 150 150 150 150 200 200
LENGTH 3730 3730 3730 3740 3750 3760 3800 3830 3870
H BARS C/C 325 375 375 350 350 325 325 300 300
LENGTH 1870 1970 2030 2070 2090 2090 2110 2090 2070
J BARS SIZE 20 20 20 20 20 20 20 20 20
C/C 325 375 375 350 350 325 325 300 300
LENGTH 2960 2910 2880 2870 2870 2890 2940 3010 3080
B 1250 1210 1180 1170 1160 1160 1150 1150 1160
D 1440 1440 1440 1440 1440 1440 1440 1440 1440
R 175 165 165 165 175 185 225 265 305
K BARS SIZE 20 20 20 20 20 20 20 20 20
C/C 325 375 375 350 350 325 325 300 300
LENGTH 2360 2290 2270 2260 2260 2290 2390 2500 2630
B 650 590 570 560 550 560 600 640 710
D 1440 1440 1440 1440 1440 1440 1440 1440 1440
R 175 165 165 165 175 185 225 265 305
S BARS LENGTH 1010 1000 1030 1040 1070 1130 1280 1490 1720
C 650 640 670 680 710 770 920 1130 1360
T BARS LENGTH 1750 1750 1750 1750 1750 1750 1750 1750 1750
U BARS LENGTH 1050 1030 1030 1040 1080 1130 1290 1450 1620
C 690 670 670 680 720 770 930 1090 1260
Q BARS SIZE 15 15 15 20 20 20 20 20 20
C/C 150 150 150 200 200 175 175 175 175
LENGTH 3730 3730 3730 3740 3750 3760 3800 3830 3870
R BARS # SETS 82 84 84 84 82 82 84 84 88

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 250 250 250 260 270 270 290 330 360
T 260 250 250 260 270 270 300 340 390
B 260 250 250 280 300 310 390 460 490
CONC. 3.2 3.1 3.1 3.3 3.5 3.6 4.2 4.9 5.5
P BARS SIZE 20 15 15 15 15 15 20 20 20
C/C 200 150 175 175 150 150 200 200 175
LENGTH 3750 3750 3750 3760 3770 3770 3790 3830 3860
H BARS C/C 375 300 300 300 400 350 325 325 325
LENGTH 1810 2370 2430 2490 2090 2090 2070 2090 2070
J BARS SIZE 20 15 15 15 20 20 20 20 20
C/C 375 300 300 300 400 350 325 325 325
LENGTH 3140 2710 2680 2670 3030 3030 3070 3130 3190
B 1290 1020 990 960 1160 1160 1160 1150 1140
D 1560 1420 1420 1420 1560 1560 1560 1560 1560
R 185 175 175 185 195 195 225 265 315
K BARS SIZE 20 15 15 15 20 20 20 20 20
C/C 375 300 300 300 400 350 325 325 325
LENGTH 2550 2320 2290 2290 2450 2450 2520 2640 2760
B 700 630 600 580 580 580 610 660 710
D 1560 1420 1420 1420 1560 1560 1560 1560 1560
R 185 175 175 185 195 195 225 265 315
S BARS LENGTH 1070 1040 1040 1110 1170 1180 1370 1580 1730
C 710 680 680 750 810 820 1010 1220 1370
T BARS LENGTH 2000 2000 2000 2000 2000 2000 2000 2000 2000
U BARS LENGTH 1110 1080 1080 1130 1170 1170 1280 1450 1630
C 750 720 720 770 810 810 920 1090 1270
Q BARS SIZE 15 15 15 15 20 20 20 20 20
C/C 150 150 150 150 200 175 175 175 150
LENGTH 3750 3750 3750 3760 3770 3770 3790 3830 3860
R BARS # SETS 84 84 84 84 84 84 88 90 92

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 250 250 250 260 270 270 290 340 390
T 260 250 250 260 270 270 300 340 400
B 260 250 250 290 310 320 390 460 500
CONC. 3.5 3.4 3.4 3.6 3.8 3.9 4.4 5.3 6.1
P BARS SIZE 20 15 15 15 15 20 20 20 20
C/C 175 150 150 150 150 200 175 175 175
LENGTH 3750 3750 3750 3760 3770 3770 3790 3840 3890
H BARS C/C 300 325 325 325 300 400 375 350 350
LENGTH 1330 2310 2410 2430 2470 2050 2030 2030 2070
J BARS SIZE 15 15 15 15 15 20 20 20 20
C/C 300 325 325 325 300 400 375 350 350
LENGTH 3490 2990 2940 2950 2950 3300 3340 3420 3480
B 1530 1050 1000 990 970 1180 1180 1190 1160
D 1670 1670 1670 1670 1670 1810 1810 1810 1810
R 185 175 175 185 195 195 225 265 325
K BARS SIZE 15 15 15 15 15 20 20 20 20
C/C 300 325 325 325 300 400 375 350 350
LENGTH 2860 2590 2550 2600 2620 2750 2820 2950 3090
B 900 650 610 640 640 630 660 720 770
D 1670 1670 1670 1670 1670 1810 1810 1810 1810
R 185 175 175 185 195 195 225 265 325
S BARS LENGTH 1070 1040 1040 1130 1180 1200 1370 1590 1800
C 710 680 680 770 820 840 1010 1230 1440
T BARS LENGTH 2500 2500 2500 2500 2500 2500 2500 2500 2500
U BARS LENGTH 1110 1080 1080 1130 1170 1170 1280 1460 1700
C 750 720 720 770 810 810 920 1100 1340
Q BARS SIZE 20 20 20 20 20 20 20 20 20
C/C 200 200 200 200 175 175 150 150 150
LENGTH 3750 3750 3750 3760 3770 3770 3790 3840 3890
R BARS # SETS 92 92 92 92 92 92 96 98 96

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 240 240 240 240 270 280 300 360 390
T 260 250 250 260 280 300 320 410 410
B 260 260 270 280 310 330 360 440 550
CONC. 3.2 3.1 3.2 3.3 3.6 3.9 4.2 5.4 6.1
P BARS SIZE 20 15 15 15 15 15 20 15 20
C/C 200 150 150 150 150 150 175 150 200
LENGTH 4240 4240 4240 4240 4270 4280 4300 4360 4390
H BARS C/C 425 300 300 425 450 425 375 375 350
LENGTH 1750 2350 2410 1930 1990 2030 2050 1970 2010
J BARS SIZE 25 20 20 25 25 25 25 25 25
C/C 425 300 300 425 450 425 375 375 350
LENGTH 3300 2850 2820 3210 3220 3220 3240 3400 3410
B 1560 1270 1240 1470 1450 1420 1410 1420 1430
D 1450 1310 1310 1450 1450 1450 1450 1450 1450
R 185 175 175 185 205 225 245 335 335
K BARS SIZE 25 20 20 25 25 25 25 25 25
C/C 425 300 300 425 450 425 375 375 350
LENGTH 2490 2250 2220 2400 2430 2450 2500 2740 2790
B 750 670 640 660 660 650 670 760 810
D 1450 1310 1310 1450 1450 1450 1450 1450 1450
R 185 175 175 185 205 225 245 335 335
S BARS LENGTH 1050 1040 1050 1080 1200 1270 1370 1690 1890
C 690 680 690 720 840 910 1010 1330 1530
T BARS LENGTH 1500 1500 1500 1500 1500 1500 1500 1500 1500
U BARS LENGTH 1100 1070 1070 1100 1200 1270 1350 1690 1730
C 740 710 710 740 840 910 990 1330 1370
Q BARS SIZE 15 15 20 20 20 20 20 20 20
C/C 150 150 200 175 200 175 175 175 150
LENGTH 4240 4240 4240 4240 4270 4280 4300 4360 4390
R BARS # SETS 86 86 86 86 86 88 88 90 92

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 250 240 240 250 260 280 310 350 400
T 270 250 250 260 280 300 330 370 440
B 270 270 270 280 310 330 400 450 560
CONC. 3.5 3.3 3.3 3.4 3.7 4 4.7 5.4 6.6
P BARS SIZE 20 20 20 20 20 20 20 20 20
C/C 175 200 200 200 200 200 175 175 175
LENGTH 4250 4240 4240 4250 4260 4280 4310 4350 4400
H BARS C/C 300 300 300 300 300 450 425 400 400
LENGTH 2250 2350 2430 2470 2490 2070 2050 2050 2010
J BARS SIZE 20 20 20 20 20 25 25 25 25
C/C 300 300 300 300 300 450 425 400 400
LENGTH 3060 2980 2940 2940 2950 3320 3380 3440 3550
B 1310 1270 1230 1210 1190 1400 1410 1410 1410
D 1440 1440 1440 1440 1440 1570 1570 1570 1570
R 195 175 175 185 205 225 255 295 365
K BARS SIZE 20 20 20 20 20 25 25 25 25
C/C 300 300 300 300 300 450 425 400 400
LENGTH 2470 2370 2340 2350 2380 2550 2640 2740 2940
B 720 660 630 620 620 630 670 710 800
D 1440 1440 1440 1440 1440 1570 1570 1570 1570
R 195 175 175 185 205 225 255 295 365
S BARS LENGTH 1100 1050 1050 1100 1180 1270 1450 1630 1960
C 740 690 690 740 820 910 1090 1270 1600
T BARS LENGTH 1750 1750 1750 1750 1750 1750 1750 1750 1750
U BARS LENGTH 1140 1070 1070 1110 1180 1270 1390 1560 1830
C 780 710 710 750 820 910 1030 1200 1470
Q BARS SIZE 20 20 20 20 20 20 20 20 20
C/C 200 200 200 175 175 175 150 150 150
LENGTH 4250 4240 4240 4250 4260 4280 4310 4350 4400
R BARS # SETS 90 90 90 90 88 92 92 92 94

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 250 250 250 250 250 280 310 340 400
T 260 260 260 260 270 300 330 380 450
B 260 260 270 300 320 360 430 480 570
CONC. 3.5 3.5 3.5 3.7 3.8 4.3 5 5.7 6.9
P BARS SIZE 20 20 20 20 20 20 20 20 20
C/C 175 200 200 200 175 200 175 150 175
LENGTH 4250 4250 4250 4250 4250 4280 4310 4340 4400
H BARS C/C 300 350 325 300 300 300 450 425 425
LENGTH 2270 2370 2450 2470 2490 2490 2050 2050 2030
J BARS SIZE 20 20 20 20 20 20 25 25 25
C/C 300 350 325 300 300 300 450 425 425
LENGTH 3160 3110 3070 3060 3060 3100 3510 3570 3680
B 1310 1260 1220 1210 1190 1190 1410 1390 1390
D 1560 1560 1560 1560 1560 1560 1700 1700 1700
R 185 185 185 185 195 225 255 305 375
K BARS SIZE 20 20 20 20 20 20 25 25 25
C/C 300 350 325 300 300 300 450 425 425
LENGTH 2570 2510 2480 2470 2480 2540 2770 2900 3100
B 720 660 630 620 610 630 670 720 810
D 1560 1560 1560 1560 1560 1560 1700 1700 1700
R 185 185 185 185 195 225 255 305 375
S BARS LENGTH 1070 1070 1080 1130 1170 1310 1490 1680 1990
C 710 710 720 770 810 950 1130 1320 1630
T BARS LENGTH 2000 2000 2000 2000 2000 2000 2000 2000 2000
U BARS LENGTH 1110 1110 1110 1110 1140 1270 1390 1580 1860
C 750 750 750 750 780 910 1030 1220 1500
Q BARS SIZE 20 20 20 20 20 20 20 20 25
C/C 175 200 175 175 150 150 150 150 200
LENGTH 4250 4250 4250 4250 4250 4280 4310 4340 4400
R BARS # SETS 92 92 92 92 92 96 96 98 98

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 250 250 250 260 280 310 310 370 430
T 270 250 250 260 280 310 320 410 480
B 270 260 270 300 330 340 440 500 580
QUANTITIES STEEL 522.3 493.3 504.7 516.8 521 533.7 585.3 579.5 638.5
CONC. 3.8 3.7 3.7 4 4.3 4.7 5.3 6.5 7.8
P BARS SIZE 20 20 20 20 20 20 20 20 20
C/C 150 175 175 175 175 175 150 150 175
LENGTH 4250 4250 4250 4260 4280 4310 4310 4370 4430
H BARS C/C 350 375 350 350 350 350 300 325 325
LENGTH 2090 2350 2430 2450 2470 2490 2470 2470 2450
J BARS SIZE 20 20 20 20 20 20 20 20 20
C/C 350 375 350 350 350 350 300 325 325
LENGTH 3510 3360 3320 3330 3350 3390 3400 3520 3630
B 1390 1280 1240 1230 1220 1210 1210 1180 1180
D 1810 1810 1810 1810 1810 1810 1810 1810 1810
R 195 175 175 185 205 235 245 335 405
K BARS SIZE 20 20 20 20 20 20 20 20 20
C/C 350 375 350 350 350 350 300 325 325
LENGTH 2920 2760 2730 2750 2790 2860 2880 3120 3300
B 800 680 650 650 660 680 690 780 850
D 1810 1810 1810 1810 1810 1810 1810 1810 1810
R 195 175 175 185 205 235 245 335 405
S BARS LENGTH 1100 1050 1070 1140 1240 1340 1490 1790 2090
C 740 690 710 780 880 980 1130 1430 1730
T BARS LENGTH 2500 2500 2500 2500 2500 2500 2500 2500 2500
U BARS LENGTH 1140 1080 1080 1130 1210 1340 1370 1700 1990
C 780 720 720 770 850 980 1010 1340 1630
Q BARS SIZE 20 20 20 20 20 20 25 20 25
C/C 175 175 175 150 150 150 225 150 150
LENGTH 4250 4250 4250 4260 4280 4310 4310 4370 4430
R BARS # SETS 100 100 100 100 100 104 104 104 108

*T BARS to be Size 20M. Modify drawing SS114-2 accordingly.
FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 250 250 250 270 280 290 320 380 430
T 280 280 280 280 280 290 340 410 460
B 280 280 280 300 360 370 450 500 590
QUANTITIES STEEL 587.4 519.4 526.8 546 562.8 585.8 621.8 602.5 657.7
CONC. 4.2 4.2 4.2 4.4 4.8 4.9 5.8 6.9 8.1
P BARS SIZE 20 20 20 20 20 20 20 20 20
C/C 150 175 175 175 175 175 150 150 150
LENGTH 4250 4250 4250 4270 4280 4290 4320 4380 4430
H BARS C/C - 300 300 400 375 350 325 350 325
LENGTH - 2050 2470 2330 2410 2410 2390 2430 2370
J BARS SIZE 20 15 15 20 20 20 20 20 20
C/C 375 300 300 400 375 350 325 350 325
LENGTH 4940 3640 3430 3660 3630 3650 3720 3800 3900
B 2560 1400 1190 1280 1250 1250 1240 1210 1240
D 2060 1920 1920 2060 2060 2060 2060 2060 2060
R 205 205 205 205 205 215 265 335 385
K BARS SIZE 20 15 15 20 20 20 20 20 20
C/C 375 300 300 400 375 350 325 350 325
LENGTH 3460 3080 2980 3110 3130 3140 3260 3430 3580
B 1080 840 740 730 750 740 780 840 920
D 2060 1920 1920 2060 2060 2060 2060 2060 2060
R 205 205 205 205 205 215 265 335 385
S BARS LENGTH 1130 1130 1130 1180 1280 1320 1550 1800 2070
C 770 770 770 820 920 960 1190 1440 1710
T BARS* LENGTH 3000* 3000* 3000* 3000* 3000* 3000* 3000 3000 3000
U BARS LENGTH 1170 1170 1170 1200 1210 1250 1440 1720 1930
C 810 810 810 840 850 890 1080 1360 1570
Q BARS SIZE 20 20 20 20 20 25 25 25 25
C/C 150 175 150 150 150 225 225 225 175
LENGTH 4250 4250 4250 4270 4280 4290 4320 4380 4430
R BARS # SETS 106 106 106 106 108 108 108 110 112

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 260 260 270 280 290 300 330 380 450
T 280 260 270 280 310 330 350 410 460
B 280 280 300 340 370 400 470 510 610
CONC. 4.5 4.4 4.6 4.9 5.3 5.7 6.4 7.4 8.8
P BARS SIZE 20 20 20 20 20 20 20 20 20
C/C 150 150 175 175 175 150 150 150 150
LENGTH 4260 4260 4270 4280 4290 4300 4330 4380 4450
H BARS C/C - 300 300 300 300 400 375 375 350
LENGTH - 1070 1810 1910 2070 2050 2070 2050 2010
J BARS SIZE 20 15 15 15 15 20 20 20 20
C/C 400 300 300 300 300 400 375 375 350
LENGTH 5190 4380 4030 3990 3940 4110 4140 4240 4350
B 2560 1920 1550 1500 1400 1400 1400 1400 1440
D 2310 2170 2170 2170 2170 2310 2310 2310 2310
R 205 185 195 205 235 255 275 335 385
K BARS SIZE 20 15 15 15 15 20 20 20 20
C/C 400 300 300 300 300 400 375 375 350
LENGTH 3830 3550 3410 3410 3430 3610 3680 3800 3940
B 1200 1090 930 920 890 900 940 960 1030
D 2310 2170 2170 2170 2170 2310 2310 2310 2310
R 205 185 195 205 235 255 275 335 385
S BARS LENGTH 1140 1110 1170 1250 1350 1440 1610 1820 2130
C 780 750 810 890 990 1080 1250 1460 1770
T BARS LENGTH 3500 3500 3500 3500 3500 3500 3500 3500 3500
U BARS LENGTH 1180 1130 1170 1210 1310 1380 1480 1720 1960
C 820 770 810 850 950 1020 1120 1360 1600
Q BARS SIZE 20 20 20 20 20 25 25 25 25
C/C 150 175 150 150 150 225 225 200 200
LENGTH 4260 4260 4270 4280 4290 4300 4330 4380 4450
R BARS # SETS 112 112 112 112 116 116 116 116 120

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 280 280 280 300 320 320 360 420 480
T 290 280 280 300 340 350 380 430 490
B 310 310 330 350 390 410 480 570 660
QUANTITIES STEEL 587.6 556.4 568.9 567 573.4 599.9 612.5 653 673.8
CONC. 5.1 5.1 5.2 5.6 6.2 6.3 7.2 8.6 10
P BARS SIZE 20 20 20 20 20 20 20 20 20
C/C 150 175 175 175 175 150 150 150 150
LENGTH 4280 4280 4280 4300 4320 4320 4360 4420 4480
H BARS C/C - - - - 325 300 300 400 400
LENGTH - - - - 750 850 1190 1350 1210
J BARS SIZE 15 15 15 15 15 15 15 20 20
C/C 300 325 300 325 325 300 300 400 400
LENGTH 5180 5160 5160 5190 4900 4850 4740 4890 5050
B 2420 2420 2420 2420 2060 2000 1840 1770 1840
D 2420 2420 2420 2420 2420 2420 2420 2560 2560
R 215 205 205 225 265 275 305 355 415
K BARS SIZE 15 15 15 15 15 15 15 20 20
C/C 300 325 300 325 325 300 300 400 400
LENGTH 4240 3950 3830 4010 4070 4060 4060 4290 4460
B 1480 1210 1090 1240 1230 1210 1160 1170 1250
D 2420 2420 2420 2420 2420 2420 2420 2560 2560
R 215 205 205 225 265 275 305 355 415
S BARS LENGTH 1220 1210 1240 1320 1460 1510 1710 1990 2290
C 860 850 880 960 1100 1150 1350 1630 1930
T BARS LENGTH 4000 4000 4000 4000 4000 4000 4000 4000 4000
U BARS LENGTH 1240 1210 1210 1290 1440 1460 1610 1830 2090
C 880 850 850 930 1080 1100 1250 1470 1730
Q BARS SIZE 20 20 20 20 20 25 25 25 25
C/C 150 150 150 150 150 225 225 225 225
LENGTH 4280 4280 4280 4300 4320 4320 4360 4420 4480
R BARS # SETS 120 120 120 124 124 120 124 126 130

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 290 290 290 290 290 320 330 420 470
T 310 310 310 310 320 340 350 440 490
B 300 320 320 350 380 400 470 550 660
CONC. 4.3 4.4 4.4 4.6 4.8 5.2 5.6 7.1 8.4
P BARS SIZE 20 15 15 20 20 20 20 20 20
C/C 175 150 150 200 175 175 150 175 175
LENGTH 4790 4790 4790 4790 4790 4820 4830 4920 4970
H BARS C/C 300 325 300 450 400 400 350 375 350
LENGTH 2610 2730 2810 2410 2430 2450 2450 2430 2410
J BARS SIZE 20 20 20 25 25 25 25 25 25
C/C 300 325 300 450 400 400 350 375 350
LENGTH 3190 3130 3090 3420 3410 3450 3460 3610 3700
B 1380 1320 1280 1480 1460 1460 1460 1470 1480
D 1440 1440 1440 1570 1570 1570 1570 1570 1570
R 235 235 235 235 245 265 275 365 415
K BARS SIZE 20 20 20 25 25 25 25 25 25
C/C 300 325 300 450 400 400 350 375 350
LENGTH 2640 2580 2540 2660 2660 2720 2740 2990 3170
B 830 770 730 720 710 730 740 850 950
D 1440 1440 1440 1570 1570 1570 1570 1570 1570
R 235 235 235 235 245 265 275 365 415
S BARS LENGTH 1250 1280 1280 1320 1380 1480 1610 1970 2270
C 890 920 920 960 1020 1120 1250 1610 1910
T BARS LENGTH 1750 1750 1750 1750 1750 1750 1750 1750 1750
U BARS LENGTH 1310 1310 1310 1310 1340 1440 1480 1860 2070
C 950 950 950 950 980 1080 1120 1500 1710
Q BARS SIZE 15 15 15 20 20 20 20 20 20
C/C 150 150 150 175 175 175 150 150 150
LENGTH 4790 4790 4790 4790 4790 4820 4830 4920 4970
R BARS # SETS 94 96 96 96 96 96 98 100 102

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 280 280 280 280 300 310 320 400 470
T 310 300 300 300 320 340 350 440 490
B 310 320 320 350 380 400 470 550 660
CONC. 4.4 4.4 4.4 4.6 5 5.3 5.7 7.2 8.6
P BARS SIZE 20 20 20 20 20 20 20 20 20
C/C 175 200 200 175 175 175 150 175 175
LENGTH 4780 4780 4780 4780 4800 4810 4820 4900 4970
H BARS C/C 300 325 300 450 450 425 350 375 375
LENGTH 2650 2750 2830 2430 2450 2470 2450 2450 2430
J BARS SIZE 20 20 20 25 25 25 25 25 25
C/C 300 325 300 450 450 425 350 375 375
LENGTH 3280 3220 3180 3520 3540 3560 3580 3710 3820
B 1350 1310 1270 1470 1460 1440 1450 1440 1470
D 1560 1560 1560 1700 1700 1700 1700 1700 1700
R 235 225 225 225 245 265 275 365 415
K BARS SIZE 20 20 20 25 25 25 25 25 25
C/C 300 325 300 450 450 425 350 375 375
LENGTH 2740 2660 2620 2750 2790 2830 2860 3090 3240
B 810 750 710 700 710 710 730 820 890
D 1560 1560 1560 1700 1700 1700 1700 1700 1700
R 235 225 225 225 245 265 275 365 415
S BARS LENGTH 1250 1250 1250 1300 1390 1460 1590 1950 2270
C 890 890 890 940 1030 1100 1230 1590 1910
T BARS LENGTH 2000 2000 2000 2000 2000 2000 2000 2000 2000
U BARS LENGTH 1290 1270 1270 1270 1350 1420 1460 1830 2070
C 930 910 910 910 990 1060 1100 1470 1710
Q BARS SIZE 20 15 20 20 20 20 25 20 25
C/C 200 150 175 175 150 150 225 150 200
LENGTH 4780 4780 4780 4780 4800 4810 4820 4900 4970
R BARS # SETS 98 98 98 100 100 100 102 104 106

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 280 280 280 280 300 310 330 400 490
T 310 290 290 300 320 340 350 440 520
B 320 300 300 330 380 400 470 600 660
QUANTITIES STEEL 577.2 543 567.2 588.6 604.1 616.5 699.3 693.6 731.4
CONC. 4.8 4.6 4.6 4.8 5.3 5.6 6.1 7.9 9.5
P BARS SIZE 20 20 20 20 20 20 25 20 20
C/C 150 175 175 175 150 150 225 150 150
LENGTH 4780 4780 4780 4780 4800 4810 4830 4900 4990
H BARS C/C 325 350 325 300 300 300 400 425 425
LENGTH 2610 2750 2850 2870 2890 2890 2470 2450 2450
J BARS SIZE 20 20 20 20 20 20 25 25 25
C/C 325 350 325 300 300 300 400 425 425
LENGTH 3550 3470 3420 3410 3430 3460 3830 3960 4100
B 1370 1320 1270 1250 1240 1230 1450 1440 1450
D 1810 1810 1810 1810 1810 1810 1950 1950 1950
R 235 215 215 225 245 265 275 365 445
K BARS SIZE 20 20 20 20 20 20 25 25 25
C/C 325 350 325 300 300 300 400 425 425
LENGTH 3010 2900 2860 2860 2900 2940 3120 3370 3600
B 830 750 710 700 710 710 740 850 950
D 1810 1810 1810 1810 1810 1810 1950 1950 1950
R 235 215 215 225 245 265 275 365 445
S BARS LENGTH 1270 1210 1210 1270 1390 1460 1610 2020 2340
C 910 850 850 910 1030 1100 1250 1660 1980
T BARS LENGTH 2500 2500 2500 2500 2500 2500 2500 2500 2500
U BARS LENGTH 1290 1240 1240 1270 1350 1420 1480 1830 2190
C 930 880 880 910 990 1060 1120 1470 1830
Q BARS SIZE 20 20 20 20 20 25 25 25 25
C/C 175 175 150 150 150 225 200 225 200
LENGTH 4780 4780 4780 4780 4800 4810 4830 4900 4990
R BARS # SETS 108 106 106 108 108 108 108 112 114

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 280 280 280 290 300 320 330 410 490
T 310 310 310 310 320 340 360 440 520
B 310 310 320 350 390 400 470 590 660
CONC. 5 5 5.1 5.3 5.6 6 6.5 8.3 9.9
P BARS SIZE 20 20 20 20 20 20 25 20 20
C/C 150 150 150 150 150 150 225 150 150
LENGTH 4780 4780 4780 4790 4800 4820 4830 4910 4990
H BARS C/C 350 400 400 350 325 325 450 300 300
LENGTH 2030 2630 2730 2810 2830 2850 2410 2870 2730
J BARS SIZE 20 20 20 20 20 20 25 20 20
C/C 350 400 400 350 325 325 450 300 300
LENGTH 4090 3790 3740 3710 3710 3740 4120 3870 4070
B 1660 1360 1310 1280 1270 1260 1470 1240 1310
D 2060 2060 2060 2060 2060 2060 2200 2060 2060
R 235 235 235 235 245 265 285 365 445
K BARS SIZE 20 20 20 20 20 20 25 20 20
C/C 350 400 400 350 325 325 450 300 300
LENGTH 3420 3240 3210 3200 3210 3250 3440 3530 3750
B 990 810 780 770 770 770 790 900 990
D 2060 2060 2060 2060 2060 2060 2200 2060 2060
R 235 235 235 235 245 265 285 365 445
S BARS LENGTH 1250 1250 1270 1320 1410 1480 1620 2020 2340
C 890 890 910 960 1050 1120 1260 1660 1980
T BARS* LENGTH 3000* 3000* 3000* 3000 3000 3000 3000 3000 3000
U BARS LENGTH 1290 1290 1290 1310 1350 1440 1510 1850 2190
C 930 930 930 950 990 1080 1150 1490 1830
Q BARS SIZE 20 20 20 20 25 25 25 25 25
C/C 150 175 150 150 225 225 175 200 150
LENGTH 4780 4780 4780 4790 4800 4820 4830 4910 4990
R BARS # SETS 110 110 112 112 112 112 114 118 120

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 280 280 290 290 300 310 320 420 480
T 310 310 310 310 320 340 360 450 520
B 310 320 320 360 400 400 480 580 670
CONC. 5.3 5.3 5.4 5.6 6 6.2 6.8 8.8 10.4
P BARS SIZE 25 20 20 20 20 25 25 25 25
C/C 225 150 150 150 150 225 200 225 225
LENGTH 4780 4780 4790 4790 4800 4810 4820 4920 4980
H BARS C/C - 300 400 375 350 325 300 325 300
LENGTH - 1990 2450 2630 2670 2710 2710 2610 2450
J BARS SIZE 20 15 20 20 20 20 20 20 20
C/C 375 300 400 375 350 325 300 325 300
LENGTH 5490 4220 4140 4050 4040 4050 4070 4270 4450
B 2810 1680 1460 1370 1350 1320 1310 1370 1440
D 2310 2170 2310 2310 2310 2310 2310 2310 2310
R 235 235 235 235 245 265 285 375 445
K BARS SIZE 20 15 20 20 20 20 20 20 20
C/C 375 300 400 375 350 325 300 325 300
LENGTH 3920 3540 3570 3550 3570 3590 3660 3880 4070
B 1240 1000 890 870 880 860 900 980 1060
D 2310 2170 2310 2310 2310 2310 2310 2310 2310
R 235 235 235 235 245 265 285 375 445
S BARS LENGTH 1250 1270 1280 1340 1420 1460 1620 2030 2340
C 890 910 920 980 1060 1100 1260 1670 1980
T BARS LENGTH 3500 3500 3500 3500 3500 3500 3500 3500 3500
U BARS LENGTH 1290 1290 1310 1310 1350 1420 1490 1890 2170
C 930 930 950 950 990 1060 1130 1530 1810
Q BARS SIZE 20 20 20 25 25 25 25 25 25
C/C 150 150 150 225 200 200 175 175 150
LENGTH 4780 4780 4790 4790 4800 4810 4820 4920 4980
R BARS # SETS 118 120 120 120 120 120 122 124 128

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 290 290 300 310 340 340 370 460 490
T 300 300 300 310 340 350 400 480 520
B 340 330 330 370 410 460 500 630 700
CONC. 5.8 5.7 5.8 6.2 6.8 7.2 8 10.2 11.1
P BARS SIZE 25 20 20 20 20 20 25 20 25
C/C 225 150 150 150 150 150 225 150 225
LENGTH 4790 4790 4800 4810 4840 4840 4870 4960 4990
H BARS C/C - - 400 375 400 350 350 350 325
LENGTH - - 1810 1890 2030 2110 2130 2010 1990
J BARS SIZE 20 15 20 20 20 20 20 20 20
C/C 375 300 400 375 400 350 350 350 325
LENGTH 5720 5440 4710 4690 4670 4630 4680 4880 4940
B 2810 2670 1800 1760 1690 1640 1610 1680 1680
D 2560 2420 2560 2560 2560 2560 2560 2560 2560
R 225 225 225 235 265 275 325 405 445
K BARS SIZE 20 15 20 20 20 20 20 20 20
C/C 375 300 400 375 400 350 350 350 325
LENGTH 4260 3950 3980 4000 4030 4040 4130 4360 4450
B 1350 1180 1070 1070 1050 1050 1060 1160 1190
D 2560 2420 2560 2560 2560 2560 2560 2560 2560
R 225 225 225 235 265 275 325 405 445
S BARS LENGTH 1300 1280 1300 1380 1520 1610 1780 2200 2400
C 940 920 940 1020 1160 1250 1420 1840 2040
T BARS LENGTH 4000 4000 4000 4000 4000 4000 4000 4000 4000
U BARS LENGTH 1280 1280 1290 1340 1460 1490 1680 2030 2190
C 920 920 930 980 1100 1130 1320 1670 1830
Q BARS SIZE 25 20 25 25 25 25 25 25 25
C/C 225 150 225 225 225 200 200 175 150
LENGTH 4790 4790 4800 4810 4840 4840 4870 4960 4990
R BARS # SETS 128 128 128 128 128 128 130 134 134

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 290 290 290 300 310 310 360 440 510
T 310 300 310 320 340 350 390 480 540
B 310 300 320 340 380 440 520 630 700
QUANTITIES STEEL 652.2 616 619.2 678.6 683.6 715.8 761 785.7 847.7
CONC. 4.8 4.7 4.9 5.1 5.5 5.9 6.9 8.7 10.1
P BARS SIZE 20 20 20 20 20 20 20 20 20
C/C 150 175 175 150 150 150 150 150 150
LENGTH 5290 5290 5290 5300 5310 5310 5360 5440 5510
H BARS C/C 400 425 425 375 375 350 325 325 325
LENGTH 2630 2730 2790 2850 2850 2850 2870 2830 2810
J BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 400 425 425 375 375 350 325 325 325
LENGTH 3690 3630 3610 3590 3620 3620 3680 3840 3950
B 1620 1580 1540 1510 1500 1490 1490 1500 1520
D 1700 1700 1700 1700 1700 1700 1700 1700 1700
R 235 225 235 245 265 275 315 405 465
K BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 400 425 425 375 375 350 325 325 325
LENGTH 2930 2860 2850 2850 2890 2900 3010 3280 3460
B 860 810 780 770 770 770 820 940 1030
D 1700 1700 1700 1700 1700 1700 1700 1700 1700
R 235 225 235 245 265 275 315 405 465
S BARS LENGTH 1270 1240 1280 1340 1440 1540 1780 2170 2450
C 910 880 920 980 1080 1180 1420 1810 2090
T BARS LENGTH 2000 2000 2000 2000 2000 2000 2000 2000 2000
U BARS LENGTH 1310 1280 1310 1350 1420 1450 1630 2000 2270
C 950 920 950 990 1060 1090 1270 1640 1910
Q BARS SIZE 20 20 20 20 20 25 25 20 25
C/C 175 175 175 150 150 225 225 150 175
LENGTH 5290 5290 5290 5300 5310 5310 5360 5440 5510
R BARS # SETS 108 106 108 108 108 108 112 114 116

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 280 280 290 290 310 320 390 450 520
T 310 300 320 320 340 350 420 470 560
B 310 310 330 350 430 450 560 650 700
QUANTITIES STEEL 689 633.5 638.4 687.4 712.5 751.9 771.1 794.8 880.8
CONC. 5 5 5.3 5.4 6.1 6.4 8 9.3 10.8
P BARS SIZE 25 20 20 20 20 25 20 20 20
C/C 225 150 150 150 150 225 150 150 150
LENGTH 5280 5280 5290 5290 5310 5320 5390 5450 5520
H BARS C/C 425 300 300 425 400 375 375 375 350
LENGTH 2610 3170 3250 2870 2850 2870 2850 2890 2850
J BARS SIZE 25 20 20 25 25 25 25 25 25
C/C 425 300 300 425 400 375 375 375 350
LENGTH 3940 3510 3490 3820 3870 3870 3990 4060 4200
B 1620 1350 1300 1490 1500 1490 1500 1490 1490
D 1950 1810 1810 1950 1950 1950 1950 1950 1950
R 235 225 245 245 265 275 345 395 485
K BARS SIZE 25 20 20 25 25 25 25 25 25
C/C 425 300 300 425 400 375 375 375 350
LENGTH 3180 2960 2950 3070 3140 3150 3340 3500 3730
B 860 800 760 740 770 770 850 930 1020
D 1950 1810 1810 1950 1950 1950 1950 1950 1950
R 235 225 245 245 265 275 345 395 485
S BARS LENGTH 1250 1240 1310 1340 1510 1560 1920 2200 2500
C 890 880 950 980 1150 1200 1560 1840 2140
T BARS LENGTH 2500 2500 2500 2500 2500 2500 2500 2500 2500
U BARS LENGTH 1290 1270 1340 1340 1420 1460 1760 1990 2340
C 930 910 980 980 1060 1100 1400 1630 1980
Q BARS SIZE 20 20 20 25 25 25 25 25 25
C/C 150 150 150 225 225 200 200 200 150
LENGTH 5280 5280 5290 5290 5310 5320 5390 5450 5520
R BARS # SETS 114 114 116 116 116 114 118 122 122

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 290 290 290 300 310 320 380 450 540
T 320 320 320 320 340 350 410 480 580
B 320 320 320 370 430 460 560 660 740
QUANTITIES STEEL 705 653 656.5 698 729.8 797.2 808.3 833 884.7
CONC. 5.5 5.5 5.5 5.9 6.4 6.7 8.2 9.9 11.9
P BARS SIZE 25 20 20 25 25 25 25 25 25
C/C 225 150 150 225 225 200 225 225 225
LENGTH 5290 5290 5290 5300 5310 5320 5380 5450 5540
H BARS C/C 300 350 325 300 450 400 400 400 400
LENGTH 2670 3110 3190 3250 2830 2850 2830 2870 2850
J BARS SIZE 20 20 20 20 25 25 25 25 25
C/C 300 350 325 300 450 400 400 400 400
LENGTH 4030 3810 3770 3750 4130 4130 4240 4330 4480
B 1590 1370 1330 1310 1510 1500 1510 1490 1490
D 2060 2060 2060 2060 2200 2200 2200 2200 2200
R 245 245 245 245 265 275 335 405 505
K BARS SIZE 20 20 20 20 25 25 25 25 25
C/C 300 350 325 300 450 400 400 400 400
LENGTH 3400 3270 3230 3230 3400 3420 3600 3810 4070
B 960 830 790 790 780 790 870 970 1080
D 2060 2060 2060 2060 2200 2200 2200 2200 2200
R 245 245 245 245 265 275 335 405 505
S BARS LENGTH 1300 1300 1300 1380 1510 1580 1890 2230 2610
C 940 940 940 1020 1150 1220 1530 1870 2250
T BARS* LENGTH 3000* 3000* 3000 3000 3000 3000 3000 3000 3000
U BARS LENGTH 1340 1340 1340 1350 1420 1460 1720 2020 2430
C 980 980 980 990 1060 1100 1360 1660 2070
Q BARS SIZE 20 20 25 25 25 25 25 25 25
C/C 150 150 225 200 200 175 175 175 150
LENGTH 5290 5290 5290 5300 5310 5320 5380 5450 5540
R BARS # SETS 120 120 120 120 120 122 124 126 128

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 290 290 290 290 310 330 390 460 540
T 310 310 320 320 340 360 420 490 580
B 320 320 350 410 450 480 560 660 770
QUANTITIES STEEL 724.4 676.7 683.8 735 740.4 804.6 820.2 887.1 928.8
CONC. 5.7 5.7 6 6.3 6.8 7.3 8.7 10.5 12.7
P BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 200 225 225 225 225 200 200 200 225
LENGTH 5290 5290 5290 5290 5310 5330 5390 5460 5540
H BARS C/C 325 350 350 300 300 450 450 425 425
LENGTH 1990 2710 3030 3110 3170 2770 2790 2770 2810
J BARS SIZE 20 20 20 20 20 25 25 25 25
C/C 325 350 350 300 300 450 450 425 425
LENGTH 4620 4260 4100 4060 4070 4440 4520 4640 4750
B 1940 1580 1410 1370 1340 1540 1530 1540 1510
D 2310 2310 2310 2310 2310 2450 2450 2450 2450
R 235 235 245 245 265 285 345 415 505
K BARS SIZE 20 20 20 20 20 25 25 25 25
C/C 325 350 350 300 300 450 450 425 425
LENGTH 3810 3630 3570 3580 3630 3800 3930 4140 4380
B 1130 950 880 890 900 900 940 1040 1140
D 2310 2310 2310 2310 2310 2450 2450 2450 2450
R 235 235 245 245 265 285 345 415 505
S BARS LENGTH 1280 1280 1340 1420 1540 1630 1920 2260 2650
C 920 920 980 1060 1180 1270 1560 1900 2290
T BARS LENGTH 3500 3500 3500 3500 3500 3500 3500 3500 3500
U BARS LENGTH 1310 1310 1340 1340 1420 1510 1760 2060 2430
C 950 950 980 980 1060 1150 1400 1700 2070
Q BARS SIZE 25 20 25 25 25 25 25 25 25
C/C 225 150 225 200 200 175 175 150 125
LENGTH 5290 5290 5290 5290 5310 5330 5390 5460 5540
R BARS # SETS 128 128 128 128 128 130 130 134 134

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 290 290 290 310 330 350 400 480 550
T 320 310 310 340 360 380 430 510 580
B 350 340 380 440 480 510 580 720 800
QUANTITIES STEEL 778.9 726.6 756 759.1 763.3 808.8 833.1 867.1 931
CONC. 6.3 6.1 6.4 7.1 7.7 8.2 9.4 11.7 13.5
P BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 200 225 225 225 225 225 200 225 200
LENGTH 5290 5290 5290 5310 5330 5350 5400 5480 5550
H BARS C/C - 350 325 325 325 300 300 300 300
LENGTH - 1930 2190 2510 2590 2650 2670 2570 2430
J BARS SIZE 20 20 20 20 20 20 20 20 20
C/C 325 350 325 325 325 300 300 300 300
LENGTH 6000 4900 4770 4650 4640 4640 4710 4880 5060
B 3060 1970 1840 1670 1630 1600 1590 1640 1710
D 2560 2560 2560 2560 2560 2560 2560 2560 2560
R 245 235 235 265 285 305 355 435 505
K BARS SIZE 20 20 20 20 20 20 20 20 20
C/C 325 350 325 325 325 300 300 300 300
LENGTH 4330 4090 4040 4040 4070 4100 4210 4420 4610
B 1390 1160 1110 1060 1060 1060 1090 1180 1260
D 2560 2560 2560 2560 2560 2560 2560 2560 2560
R 245 235 235 265 285 305 355 435 505
S BARS LENGTH 1340 1310 1370 1520 1630 1730 1970 2400 2710
C 980 950 1010 1160 1270 1370 1610 2040 2350
T BARS LENGTH 4000 4000 4000 4000 4000 4000 4000 4000 4000
U BARS LENGTH 1340 1310 1310 1420 1510 1590 1800 2140 2440
C 980 950 950 1060 1150 1230 1440 1780 2080
Q BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 225 225 200 200 200 175 175 150 125
LENGTH 5290 5290 5290 5310 5330 5350 5400 5480 5550
R BARS # SETS 136 136 136 136 136 138 138 140 142

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 320 290 300 320 350 390 440 540 620
T 350 320 330 350 380 420 470 570 640
B 320 330 360 390 450 460 550 640 730
CONC. 5.6 5.3 5.6 6.1 6.8 7.4 8.7 10.8 12.5
P BARS SIZE 20 20 20 20 20 20 20 20 20
C/C 150 150 150 150 150 150 150 175 175
LENGTH 5820 5790 5800 5820 5850 5890 5940 6040 6120
H BARS C/C 375 375 350 350 350 325 300 300 300
LENGTH 2990 3110 3190 3210 3270 3250 3250 3210 2990
J BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 375 375 350 350 350 325 300 300 300
LENGTH 3810 3700 3680 3700 3720 3790 3870 4050 4280
B 1680 1620 1580 1570 1540 1550 1550 1570 1690
D 1700 1700 1700 1700 1700 1700 1700 1700 1700
R 275 245 255 275 305 345 395 495 565
K BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 375 375 350 350 350 325 300 300 300
LENGTH 3090 2960 2950 2980 3040 3140 3280 3580 3790
B 960 880 850 850 860 900 960 1100 1200
D 1700 1700 1700 1700 1700 1700 1700 1700 1700
R 275 245 255 275 305 345 395 495 565
S BARS LENGTH 1380 1310 1380 1480 1650 1780 2040 2450 2790
C 1020 950 1020 1120 1290 1420 1680 2090 2430
T BARS LENGTH 2000 2000 2000 2000 2000 2000 2000 2000 2000
U BARS LENGTH 1460 1340 1380 1460 1590 1760 1970 2400 2710
C 1100 980 1020 1100 1230 1400 1610 2040 2350
Q BARS SIZE 20 20 20 20 20 20 25 20 25
C/C 175 175 150 150 150 150 225 150 175
LENGTH 5820 5790 5800 5820 5850 5890 5940 6040 6120
R BARS # SETS 114 116 116 114 118 116 120 120 126

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 320 290 300 320 350 390 440 530 610
T 350 320 330 350 380 420 470 570 640
B 320 330 360 400 450 460 550 650 730
QUANTITIES STEEL 709.4 716.9 756 774.4 789.8 790.1 859.7 950.1 986.5
CONC. 6 5.6 5.9 6.5 7.2 7.8 9.1 11.3 13.1
P BARS SIZE 20 20 25 25 25 20 25 20 20
C/C 150 150 225 225 225 150 225 150 150
LENGTH 5820 5790 5800 5820 5850 5890 5940 6030 6110
H BARS C/C 425 425 400 375 375 375 350 325 325
LENGTH 2990 3130 3210 3270 3270 3290 3290 3270 3170
J BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 425 425 400 375 375 375 350 325 325
LENGTH 4060 3940 3920 3920 3970 4020 4100 4260 4430
B 1680 1610 1570 1540 1540 1530 1530 1530 1590
D 1950 1950 1950 1950 1950 1950 1950 1950 1950
R 275 245 255 275 305 345 395 495 565
K BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 425 425 400 375 375 375 350 325 325
LENGTH 3340 3190 3180 3210 3280 3370 3500 3780 3980
B 960 860 830 830 850 880 930 1050 1140
D 1950 1950 1950 1950 1950 1950 1950 1950 1950
R 275 245 255 275 305 345 395 495 565
S BARS LENGTH 1380 1310 1380 1490 1650 1780 2040 2450 2780
C 1020 950 1020 1130 1290 1420 1680 2090 2420
T BARS LENGTH 2500 2500 2500 2500 2500 2500 2500 2500 2500
U BARS LENGTH 1460 1340 1380 1460 1590 1760 1970 2380 2690
C 1100 980 1020 1100 1230 1400 1610 2020 2330
Q BARS SIZE 20 20 25 25 25 25 25 25 25
C/C 175 150 225 225 225 225 200 150 150
LENGTH 5820 5790 5800 5820 5850 5890 5940 6030 6110
R BARS # SETS 120 124 124 120 124 124 128 128 134

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 320 300 300 330 360 390 430 530 610
T 350 320 330 360 390 420 470 570 640
B 320 330 360 420 490 500 570 690 770
QUANTITIES STEEL 771.4 715 780.7 785.5 800 827.3 896.6 945 1033
CONC. 6.3 6 6.2 7 7.9 8.5 9.6 12.1 14
P BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 225 225 225 225 225 225 200 225 225
LENGTH 5820 5800 5800 5830 5860 5890 5930 6030 6110
H BARS C/C 450 300 425 425 425 400 375 375 350
LENGTH 2930 3510 3210 3250 3250 3290 3270 3290 3230
J BARS SIZE 25 20 25 25 25 25 25 25 25
C/C 450 300 425 425 425 400 375 375 350
LENGTH 4340 3870 4170 4200 4240 4270 4350 4500 4650
B 1710 1430 1570 1550 1550 1530 1530 1520 1560
D 2200 2060 2200 2200 2200 2200 2200 2200 2200
R 275 245 255 285 315 345 395 495 565
K BARS SIZE 25 20 25 25 25 25 25 25 25
C/C 450 300 425 425 425 400 375 375 350
LENGTH 3630 3320 3430 3490 3560 3630 3750 4060 4260
B 1000 880 830 840 870 890 930 1080 1170
D 2200 2060 2200 2200 2200 2200 2200 2200 2200
R 275 245 255 285 315 345 395 495 565
S BARS LENGTH 1380 1320 1380 1550 1730 1830 2060 2510 2840
C 1020 960 1020 1190 1370 1470 1700 2150 2480
T BARS* LENGTH 3000* 3000 3000 3000 3000 3000 3000 3000 3000
U BARS LENGTH 1460 1350 1380 1510 1630 1760 1960 2380 2690
C 1100 990 1020 1150 1270 1400 1600 2020 2330
Q BARS SIZE 20 20 25 25 25 25 25 25 25
C/C 150 150 200 200 200 200 175 150 125
LENGTH 5820 5800 5800 5830 5860 5890 5930 6030 6110
R BARS # SETS 126 128 128 126 130 130 132 136 138

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 320 290 300 330 360 380 430 530 610
T 350 320 330 360 390 420 470 570 640
B 340 350 390 450 490 500 580 690 770
CONC. 6.7 6.3 6.7 7.6 8.3 8.8 10.1 12.6 14.6
P BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 200 200 200 225 225 200 200 200 200
LENGTH 5820 5790 5800 5830 5860 5880 5930 6030 6110
H BARS C/C 300 300 300 450 450 425 400 400 375
LENGTH 2410 3310 3510 3170 3210 3230 3230 3290 3130
J BARS SIZE 20 20 20 25 25 25 25 25 25
C/C 300 300 300 450 450 425 400 400 375
LENGTH 4710 4210 4130 4490 4510 4540 4620 4750 4950
B 1970 1520 1420 1590 1570 1550 1550 1520 1610
D 2310 2310 2310 2450 2450 2450 2450 2450 2450
R 275 245 255 285 315 345 395 495 565
K BARS SIZE 20 20 20 25 25 25 25 25 25
C/C 300 300 300 450 450 425 400 400 375
LENGTH 3900 3630 3620 3820 3870 3910 4050 4330 4530
B 1160 940 910 920 930 920 980 1100 1190
D 2310 2310 2310 2450 2450 2450 2450 2450 2450
R 275 245 255 285 315 345 395 495 565
S BARS LENGTH 1410 1340 1420 1590 1730 1820 2070 2510 2840
C 1050 980 1060 1230 1370 1460 1710 2150 2480
T BARS LENGTH 3500 3500 3500 3500 3500 3500 3500 3500 3500
U BARS LENGTH 1460 1340 1380 1510 1630 1750 1960 2380 2690
C 1100 980 1020 1150 1270 1390 1600 2020 2330
Q BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 225 200 200 200 175 175 150 125 100
LENGTH 5820 5790 5800 5830 5860 5880 5930 6030 6110
R BARS # SETS 134 136 136 136 138 136 140 142 146

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 300 300 320 340 370 370 450 520 610
T 340 330 350 370 400 410 490 560 650
B 350 360 420 470 530 550 650 690 790
CONC. 6.8 6.8 7.5 8.2 9.1 9.3 11.4 13 15.4
P BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 175 200 200 200 225 200 200 200 200
LENGTH 5800 5800 5820 5840 5870 5870 5950 6020 6110
H BARS C/C - 325 325 300 300 450 450 425 425
LENGTH - 2550 3010 3110 3150 3130 3130 3110 2890
J BARS SIZE 20 20 20 20 20 25 25 25 25
C/C 300 325 325 300 300 450 450 425 425
LENGTH 6290 4860 4660 4640 4670 4830 4950 5070 5320
B 3310 1900 1670 1620 1600 1600 1600 1610 1720
D 2560 2560 2560 2560 2560 2700 2700 2700 2700
R 265 255 275 295 325 335 415 485 575
K BARS SIZE 20 20 20 20 20 25 25 25 25
C/C 300 325 325 300 300 450 450 425 425
LENGTH 4500 4090 4040 4070 4140 4290 4460 4610 4860
B 1520 1130 1050 1050 1070 1060 1110 1150 1260
D 2560 2560 2560 2560 2560 2700 2700 2700 2700
R 265 255 275 295 325 335 415 485 575
S BARS LENGTH 1380 1380 1520 1650 1820 1860 2230 2480 2880
C 1020 1020 1160 1290 1460 1500 1870 2120 2520
T BARS LENGTH 4000 4000 4000 4000 4000 4000 4000 4000 4000
U BARS LENGTH 1410 1380 1460 1550 1680 1700 2040 2340 2720
C 1050 1020 1100 1190 1320 1340 1680 1980 2360
Q BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 200 200 200 175 175 175 175 125 100
LENGTH 5800 5800 5820 5840 5870 5870 5950 6020 6110
R BARS # SETS 144 144 140 142 144 144 150 150 150

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 330 310 330 360 410 420 510 630 780
T 370 340 360 390 440 450 510 580 660
B 350 350 370 450 480 490 610 700 810
CONC. 6.4 6 6.4 7.4 8.3 8.5 10.4 12.5 15.1
P BARS SIZE 20 20 20 20 20 20 20 20 20
C/C 150 150 150 150 150 150 150 150 175
LENGTH 6330 6310 6330 6360 6410 6420 6510 6630 6780
H BARS C/C 350 350 325 325 325 300 300 300 300
LENGTH 3370 3470 3570 3630 3610 3630 3610 3530 3450
J BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 350 350 325 325 325 300 300 300 300
LENGTH 3890 3810 3790 3800 3890 3900 4030 4230 4470
B 1730 1690 1640 1610 1620 1610 1650 1740 1850
D 1700 1700 1700 1700 1700 1700 1700 1700 1700
R 295 265 285 315 365 375 435 505 585
K BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 350 350 325 325 325 300 300 300 300
LENGTH 3190 3080 3080 3120 3260 3280 3470 3690 3950
B 1030 960 930 930 990 990 1090 1200 1330
D 1700 1700 1700 1700 1700 1700 1700 1700 1700
R 295 265 285 315 365 375 435 505 585
S BARS LENGTH 1460 1390 1480 1680 1860 1900 2290 2680 3160
C 1100 1030 1120 1320 1500 1540 1930 2320 2800
T BARS LENGTH 2000 2000 2000 2000 2000 2000 2000 2000 2000
U BARS LENGTH 1540 1420 1510 1630 1850 1890 2190 2550 2990
C 1180 1060 1150 1270 1490 1530 1830 2190 2630
Q BARS SIZE 20 20 20 20 20 25 20 20 25
C/C 175 150 150 150 150 225 150 150 150
LENGTH 6330 6310 6330 6360 6410 6420 6510 6630 6780
R BARS # SETS 120 120 120 124 122 124 128 130 134

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 330 310 330 360 400 410 480 580 700
T 380 340 360 390 440 450 510 620 680
B 350 350 390 450 510 530 610 750 850
QUANTITIES STEEL 812.4 802.8 813.6 851.5 857 914.3 969.4 1061.7 1090.5
CONC. 6.8 6.3 6.9 7.7 8.8 9.1 10.7 13.5 15.7
P BARS SIZE 25 25 25 25 20 25 25 25 20
C/C 225 225 225 225 150 225 225 225 150
LENGTH 6330 6310 6330 6360 6400 6410 6480 6580 6700
H BARS C/C 375 375 375 350 350 325 300 300 300
LENGTH 3370 3510 3610 3650 3670 3690 3690 3530 3370
J BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 375 375 375 350 350 325 300 300 300
LENGTH 4150 4040 4020 4040 4100 4110 4210 4460 4690
B 1720 1670 1620 1600 1580 1570 1580 1650 1790
D 1950 1950 1950 1950 1950 1950 1950 1950 1950
R 305 265 285 315 365 375 435 545 605
K BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 375 375 375 350 350 325 300 300 300
LENGTH 3460 3310 3310 3360 3470 3500 3650 3990 4200
B 1030 940 910 920 950 960 1020 1180 1300
D 1950 1950 1950 1950 1950 1950 1950 1950 1950
R 305 265 285 315 365 375 435 545 605
S BARS LENGTH 1480 1390 1510 1680 1890 1950 2240 2740 3130
C 1120 1030 1150 1320 1530 1590 1880 2380 2770
T BARS LENGTH 2500 2500 2500 2500 2500 2500 2500 2500 2500
U BARS LENGTH 1560 1420 1510 1630 1830 1870 2140 2600 2940
C 1200 1060 1150 1270 1470 1510 1780 2240 2580
Q BARS SIZE 20 20 25 25 25 25 25 25 25
C/C 150 150 225 225 225 200 200 150 150
LENGTH 6330 6310 6330 6360 6400 6410 6480 6580 6700
R BARS # SETS 126 128 126 130 132 132 132 136 140

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 320 320 330 350 400 410 470 560 700
T 360 350 360 380 440 450 510 600 700
B 350 350 420 450 520 550 650 750 880
QUANTITIES STEEL 846.6 805.7 841 887.9 892.9 951.1 1005.4 1065 1140.5
CONC. 6.9 6.8 7.4 7.9 9.3 9.7 11.4 13.7 16.9
P BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 200 225 225 200 225 200 200 200 225
LENGTH 6320 6320 6330 6350 6400 6410 6470 6560 6700
H BARS C/C 400 425 400 375 375 350 325 325 325
LENGTH 3350 3530 3610 3670 3670 3690 3690 3670 3390
J BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 400 425 400 375 375 350 325 325 325
LENGTH 4390 4290 4270 4270 4350 4360 4450 4600 4940
B 1740 1660 1620 1590 1580 1570 1570 1580 1760
D 2200 2200 2200 2200 2200 2200 2200 2200 2200
R 285 275 285 305 365 375 435 525 625
K BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 400 425 400 375 375 350 325 325 325
LENGTH 3680 3570 3560 3590 3720 3740 3900 4170 4480
B 1030 940 910 910 950 950 1020 1150 1300
D 2200 2200 2200 2200 2200 2200 2200 2200 2200
R 285 275 285 305 365 375 435 525 625
S BARS LENGTH 1440 1420 1550 1650 1900 1970 2290 2680 3200
C 1080 1060 1190 1290 1540 1610 1930 2320 2840
T BARS LENGTH 3000 3000 3000 3000 3000 3000 3000 3000 3000
U BARS LENGTH 1490 1460 1510 1590 1830 1870 2130 2510 2990
C 1130 1100 1150 1230 1470 1510 1770 2150 2630
Q BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 225 225 200 200 200 175 175 150 125
LENGTH 6320 6320 6330 6350 6400 6410 6470 6560 6700
R BARS # SETS 132 132 132 136 138 136 138 140 146

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 320 310 330 360 390 410 450 530 650
T 360 340 360 390 430 450 490 580 700
B 360 360 410 470 520 570 680 780 900
CONC. 7.3 7 7.7 8.6 9.5 10.2 11.7 14 17.2
P BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 175 200 200 200 200 200 175 175 200
LENGTH 6320 6310 6330 6360 6390 6410 6450 6530 6650
H BARS C/C 450 450 425 400 400 375 350 350 350
LENGTH 3150 3450 3570 3630 3650 3650 3650 3670 3410
J BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 450 450 425 400 400 375 350 350 350
LENGTH 4740 4570 4540 4550 4600 4630 4690 4810 5130
B 1840 1700 1640 1610 1590 1590 1590 1570 1700
D 2450 2450 2450 2450 2450 2450 2450 2450 2450
R 285 265 285 315 355 375 415 505 625
K BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 450 450 425 400 400 375 350 350 350
LENGTH 4000 3840 3840 3890 3970 4020 4150 4400 4720
B 1100 970 940 950 960 980 1050 1160 1290
D 2450 2450 2450 2450 2450 2450 2450 2450 2450
R 285 265 285 315 355 375 415 505 625
S BARS LENGTH 1450 1410 1540 1710 1880 2000 2270 2650 3160
C 1090 1050 1180 1350 1520 1640 1910 2290 2800
T BARS LENGTH 3500 3500 3500 3500 3500 3500 3500 3500 3500
U BARS LENGTH 1490 1420 1510 1630 1790 1870 2040 2410 2920
C 1130 1060 1150 1270 1430 1510 1680 2050 2560
Q BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 200 200 200 175 175 175 150 100 100
LENGTH 6320 6310 6330 6360 6390 6410 6450 6530 6650
R BARS # SETS 140 140 140 144 144 144 146 148 152

FILL HEIGHT
0.6 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0
DIMENSIONS W 340 320 340 360 400 410 480 590 670
T 370 350 370 390 440 460 530 630 720
B 370 390 440 490 560 590 690 820 930
QUANTITIES STEEL 894.7 863.1 885.5 941.6 937 1025.5 1050.5 1136 1240.6
CONC. 7.9 7.7 8.4 9.1 10.4 10.9 12.9 15.9 18.5
P BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 175 200 200 200 200 175 175 200 175
LENGTH 6340 6320 6340 6360 6400 6410 6480 6590 6670
H BARS C/C 300 300 300 425 450 400 400 375 375
LENGTH 2430 3190 3550 3550 3570 3570 3570 3410 3190
J BARS SIZE 20 20 20 25 25 25 25 25 25
C/C 300 300 300 425 450 400 400 375 375
LENGTH 5230 4820 4670 4840 4900 4920 5030 5280 5520
B 2210 1830 1650 1650 1630 1620 1620 1710 1810
D 2560 2560 2560 2700 2700 2700 2700 2700 2700
R 295 275 295 315 365 385 455 555 645
K BARS SIZE 20 20 20 25 25 25 25 25 25
C/C 300 300 300 425 450 400 400 375 375
LENGTH 4310 4090 4070 4240 4350 4360 4550 4840 5080
B 1290 1100 1050 1050 1080 1060 1140 1270 1370
D 2560 2560 2560 2700 2700 2700 2700 2700 2700
R 295 275 295 315 365 385 455 555 645
S BARS LENGTH 1510 1480 1610 1730 1960 2040 2380 2860 3260
C 1150 1120 1250 1370 1600 1680 2020 2500 2900
T BARS LENGTH 4000 4000 4000 4000 4000 4000 4000 4000 4000
U BARS LENGTH 1550 1460 1550 1630 1830 1900 2200 2640 3010
C 1190 1100 1190 1270 1470 1540 1840 2280 2650
Q BARS SIZE 25 25 25 25 25 25 25 25 25
C/C 200 200 175 175 175 150 150 125 100
LENGTH 6340 6320 6340 6360 6400 6410 6480 6590 6670
R BARS # SETS 146 146 148 150 152 152 154 158 160

DETAILING MANUAL
DIVISION 7 – NON-RIGID FRAME BOX CULVERTS
August 2003

2003 03 14 NON-RIGID FRAME BOX CULVERTS Page 125
7 NON-RIGID FRAME BOX CULVERTS
7.1 GENERAL
These culverts differ from standard rigid frame box culverts as there are
no haunches at the corners, slabs and walls have only one layer of steel
in each direction and all steel is straight (except for apron dowels). Note
that these culverts are designed to accommodate fill heights of up to 5 .0
metres.
Dimensions and detailing information for standard non-rigid frame box
culverts are given in Figure 7.2(a). Construction joints indicated are
optional and are provided for the contractor's convenience.
Reinforcing details for standard non-rigid frame box culverts are shown in
Figure 7.2(b). Table 7-2 identifies the various bar types used in these
culverts.
Detailing information listed in the detailing table at the end of this division
should be read in conjunction with Figure 7.2(a) and (b) and Table 7-2.
Details of apron walls are provided in Division 8.

FIGURE 7.2(a) NON-RIGID FRAME BOX CULVERT DIMENSIONS
SPAN
W
HEIGHT
B
CONSTRUCTION
FIGURE 7.2(b) NON-RIGID FRAME BOX CULVERT REINFORCEMENT
R Bars @ 300
R
Bars
@
300
P Bars
T Bars
P Bars

P BARS STRAIGHT BOTTOM AND TOP SLAB
INSIDE FACE
R BARS STRAIGHT
LONGITUDINAL
15M BARS
M BARS STRAIGHT 15M BARS, APRON WALL
500
1080*
L BARS 15M BARS
DOWELS TO APRON WALL
T BARS STRAIGHT INSIDE FACE OF WALLS
-* represents vertical dimension

7.3 DETAILING OF BOX CULVERT DRAWINGS
The following is a suggested procedure for completing the structural
standard drawings for standard non-rigid frame box culvert, SS114-3,
without skewed ends, retaining walls or other special features.
- Obtain culvert size, length, and height of fill from Culvert Data
Sheet.
- Select appropriate structural standard drawing.
- Determine from Culvert Data Sheet whether culvert is extension
or not:
side of section Detail 1 to a solid line and label - "END OF
EXISTING CULVERT". Insert length of culvert extension on
the horizontal dimension line:
e.g. 9 m RT
11 m LT
If culvert is not an extension, label centreline "Centre-Line
Highway" and add culvert length each side of Centre-Line
Highway
e.g. 16 m RT
17 m LT
of culvert.
bottom slab and walls on "Typical Culvert Section" detail.
- Insert bar size and /or spacing for P and T bars where required
on
- all details.
- Add apron wall quantities

- Complete steel bar table.
- Add adjustment to steel quantity for R bar laps.
- Insert total quantities in "Culvert Quantities" table on drawing.
according to 4.3.1.
Spacing and bar lengths are available from the culvert detailing table
located at the end of this division.
Number of P and T bars required is available from Division 8. This
procedure considers only one bar per cross-section; therefore the
numbers given must be multiplied by 2 for P and T bars.
For R bars the number of sets of bars is available on the detailing tables;
the number of bars per set and bar lengths in Division 8.
7.3.3 STEEL TABLE FOR APRON WALL
Length and number of L and M bars are available as given in Division 8.
The additional volume of concrete required for apron walls is described in
Division 8.
Complete the quantity table. Concrete and steel quantities should be the
total quantity for the complete length of culvert including apron walls.

7.4 DETAILING TABLE
This table lists non-rigid frame culvert dimensions, concrete and steel
quantities, and reinforcing steel detailing information.
SPAN x HEIGHT
1.25x1.25 1.50x1.25 1.50x1.50
T 190 220 220
B 230 250 250
DIMENSIONS
W 190 220 220
CONC. 1.2 1.5 1.6
QUANTITIES
STEEL 79.9 91.0 100.5
SIZE 20 20 20
C/C 300 250 250
P BARS
LENGTH 1490 1800 1800
SIZE 15 15 15
C/C 250 300 250
T BARS
LENGTH 1500 1550 1800
R BARS #SETS 24 26 28
Fill Height ≤ 5.0 m

DETAILING MANUAL
DIVISION 8 – CULVERT DETAILS
August 2003

2003 03 14 CULVERT DETAILS Page 131
8 CULVERT DETAILS
8.1 REINFORCING STEEL DETAILS
8.1.1 VERTICAL AND TRANSVERSE BARS
The number of vertical and transverse bars, as designated in Section 4.4,
required for a given length of culvert may be determined from the following
expression:
1000 X C X Lc
b
where,
C equals 1 for H (open footing culverts)
C equals 4 for J and K (both, box culverts) and V (open footing
culverts
C equals 2 for the remainder
Round up decimal numbers up to the nearest whole number.
8.1.2 LONGITUDINAL BARS
The number and length of longitudinal bars, as designated in Section 4.4,
required for a given length of culvert may be obtained from the following
table:
TABLE 8-1 LONGITUDINAL REINFORCING BAR DETAILS
Lc
(m)
NO. OF BARS
PER SET
LENGTH OF
EACH R BAR
LENGTH OF
EACH W BAR
up to 6 1 Lc - 150 mm Lc - 150 mm
over 6 up to 12 2 Lc/2 + 150 mm Lc/2 + 200 mm
over 12 up to 18 3 Lc/3 + 320 mm
Lc/3 + 250 mm

The length of each bar includes an allowance for lap lengths.
For longer culverts, determine the number of bars required per set for
one-half the actual length and then multiply this number by two. The
length of each bar may be taken as the entry corresponding to one-half
the actual culvert length.
8.1.3 REINFORCING STEEL QUANTITY ADJUSTMENT FOR R AND W
BARS
The quantities given in the detailing tables are based on a one-metre long
section of standard culvert. These quantities require adjustment to
account for the lapping of the R and W bars.
The additional steel quantity (in kilograms) to account for the lapping of
the R bars is:
(No. OF SETS OF R BARS) x (No. OF BARS PER SET – 1) x 0.707
The additional steel quantity (in kilograms) to account for the lapping of W
bar is:
(No. OF SETS OF W BARS) x (No. OF BARS PER SET – 1) x 1.295

8.2 APRON WALLS
8.2.1 DETAILS OF APRON WALLS
All box culverts must have a 1.2 metre deep apron wall at each end. A
cross-sectional view of a typical apron wall is shown in Figure 8.2.1.
FIGURE 8.2.1 SECTION AT APRON WALL
L BARS
15M @ 300 mm
1200 mm
380 mm
OPTIONAL
CONSTRUCTION
JOINT
BOTTOM SLAB
M BARS
15M @ 450mm
8.2.2 CONCRETE QUANTITY FOR APRON WALL
The additional volume of concrete (cubic metres) required for each apron
wall may be determined from the following expression:
380 x (S + 2 x W) x (1200 – B) x 10-9
Modification of this quantity is required for culverts with skewed ends.

8.2.3 REINFORCING STEEL QUANTITY FOR APRON WALL
The quantities shown on the standard drawings must be adjusted to
include reinforcement for the apron walls.
The length of L bars for apron walls is the same for all culverts. The
required number of L bars varies and may be determined from the
following expression:
S + 2 x W +1
300
This expression provides the number of L bars for one apron wall.
The length of each M bar (in mm) may be determined from the following
expression:
(S + 2 x W) - 100

8.3 HEADER WALLS
8.3.1 DETAILS OF HEADER WALLS
Header wall details are shown in Figures 8.3.1(a) and (b).
8.3.2 CONCRETE QUANTITY FOR HEADER WALL
The additional volume of concrete required for one header wall (in cubic
metres) may be determined from the following expression:
0.114 x ( S + 2 x W ) / 1000

8.3.3 REINFORCING STEEL QUANTITY FOR HEADER WALL
The quantities shown on the structural standard drawings must be
adjusted to include reinforcement for the header walls, where applicable.
The area of Y bars needed in the header walls may be determined from
Table 8-3(a), for culvert ends skewed up to 25 degrees. The area of steel
indicated is the total area required for both the top and bottom reinforcing
bars of the header wall. The same area of steel should be placed in both
locations.
TABLE 8-3(a) AREA OF STEEL FOR Y BARS FOR VARIOUS SKEWED END
ANGLES
Using the total area of reinforcing given in Table 8-3(a), the size and
number of Y bars can be obtained from Table 8-3(b).
TABLE 8-3(b) REINFORCING BAR DETAILS
SPAN
(m)
up to 2 1001 1004 1011 1025 1047 1076
1441
1417
2 - 3 1421 1513
1472 1578
3 - 4 2005 2019 2047 2105 2195 2312
4 - 5 2838 2858 2918 3022 3172 3400
4145
4018
5 - 6 4046 4601
4322 4983
REINFORCING AREA (mm )
2
0° 5° 10° 15° 20° 25°
BAR SIZE MASS
(kg/m)
AREA
(mm )
2
15M 1.570 200
20M 2.355 300
25M 3.925 500
30M 5.495 700
35M 7.850 1000

The additional quantity of steel required (in kilograms) for the Y bars in
one header wall is:
(Y BAR LENGTH) x (Y BAR MASS) x (No. OF Y BARS REQ'D)
The length of Z bars remains constant for all culverts. However, the
required number of Z bars may be determined from the formula:
( S + 2 x W ) / 300 + 1
This expression provides the number of bars for one header wall only.
The additional quantity of steel required (in kilograms) for the Z bars in
one header wall is:
1.57 x (( 2T + 930 ) / 1000 ) x (No. of Z BARS REQ’d)
Modification of the Z bar quantity is required for culverts with skewed
ends.

FIGURE 8.3.1(a) ELEVATION AT END OF CULVERT
HEADER WALL
(WHERE REQUIRED)
END OF
CULVERT
END OF
FOOTING
100
FIGURE 8.3.1(b) SECTION AT HEADER WALL
Z BARS
15M @ 300 mm
OPTIONAL
CONSTRUCTION JOINT
Y BARS
TOP SLAB
380
300

8.4 SKEWED END CULVERTS
8.4.1 DETAILS OF SKEWED END CULVERTS
A plan view of the culvert shall be added to the standard drawing, showing
the skew angle and skewed end or ends.
In most cases the ends of a culvert are skewed at the same angle γ as the
skew angle of the culvert θ.
A detail showing steel layout at skewed ends shall be added to the
standard drawing with the modified bar spacing and necessary
dimensions shown in the appropriate places.
A plan view of header wall and apron (where applicable) shall be added.
8.4.2 CONCRETE QUANTITY ADJUSTMENT FOR SKEWED END
CULVERTS
Concrete quantities for the apron walls and header walls must be adjusted
to account for the skewed ends. The increase is proportional to secant γ.
8.4.3 REINFORCING STEEL QUANTITY ADJUSTMENT FOR SKEWED
END CULVERTS
In computing the quantity of reinforcing bars required for skewed end
culverts the quantities described in Section 8.1 must be modified as
follows.
The total number of additional vertical or transverse bars required for each
bar type of a culvert skewed at both ends is as follows:
C (S +2 x W) tan γ
b
where C is defined in Section 8.1.1.
Note that if the culvert has only one skewed end, then half the value
derived from the above formula should be used.
Figure 8.4.3(a) details how P and Q bars are to be fanned.
H bars are to be similarly treated.
Figure 8.4.3(b) details how J and K bars are to be fanned.
S (box culverts), T, and U bars are to be similarly treated.

The additional steel quantity for each bar type is the product of the
number of additional bars, the length of each bar type and the bar mass
per metre.
The lengths of the L and Z bars remain unchanged but the number
required must be increased by a factor equal to secant γ.
The number of rows of M and Y bars required remains unchanged.
However the lengths need to be increased. The length of the M bars shall
be increased by a factor equaling secant γ. The treatment of the Y bars is
described in Section 8.3.

FIGURE 8.4.3(a) FANNING OF P AND Q BARS
START OF
S
+
2
x
W
FANNING
NORMAL SPACING
2a
L
C
SPAN
1/2 NORMAL
SPACING
FIGURE 8.4.3(b) FANNING OF J AND K BARS
γ
C
SPAN
a
START OF
FANNING
2a
FANNING
START OF
1/2 NORMAL
SPACING
NORMAL
SPACING
J BAR
K BAR
where a = (S + 2 x W) tan θ

8.4.4 EXTENSION OF CULVERTS
When an existing culvert is being extended, at least one of the following
requirements shall be met.
i. Header walls shall be constructed as specified in Section 4.2.6;
and/or
ii. Dowels shall be embedded into the existing culvert and cross the
joint between the existing and extension culverts; and/or
iii. A reinforced concrete slab shall be placed over the full length of
the joint between the existing and extension culverts.
Figure 8.4.4 illustrates the details that would be shown on Detail 1 if header
walls were to be constructed. The other requirements, if specified, must be
similarly detailed.
FIGURE 8.4.4 EXTENSION OF CULVERTS
END OF
EXISTING
CULVERT
1
B
B
B
1200
380
B

8.5 INTERSECTING DRAINS, CATCH BASINS OR MANHOLES
Where drains or other features intersect a culvert, modifications must be
made to the structural standard drawings to provide an opening in the wall
or top slab of the culvert, and details of the additional steel required to
reinforce the perimeter of such openings must be added. A plan view
detailing the location and dimensions of the opening shall be shown.
The maximum diameter for circular openings is 760 mm. The maximum
side dimension of square or rectangular openings is 600 mm.
Details in Sections 8.5.1 and 8.5.2 apply where a hole interferes with P
bars in the top slab. Similar details apply where a hole interferes with H,
J, K, S, T or U bars in slabs or walls.
R bars may be cut for any hole where required.
Culverts requiring holes located within 300 mm of any haunch or with a
dimension exceeding the above limits shall be referred to the Structural
Engineer for special design consideration and advice.

8.5.1 HOLE DIAMETER OR SIDE DIMENSION NOT EXCEEDING 300 mm
- Adjust bar space at hole to provide 50 mm of concrete cover to
P bars.
- Provide 1 - 20M bar 1.2 metres long, each side, as shown in
Figure 8.5.1.
FIGURE 8.5.1 REINFORCING DETAILS FOR SMALL OPENINGS
NORMAL 'P' BARS NORMAL 'P' BARS
50 mm MIN COVER
(TYP ALL AROUND)
N20001
(TF
&
BF
OF
SLAB
-
1.2m
LONG)
N20001
(TF
&
BF
OF
SLAB
-
1.2m
LONG)

8.5.2 HOLES 301 mm TO 760 mm DIAMETER OR RECTANGULAR HOLES
WITH 301 mm TO 600 mm SIDE DIMENSION
- Adjustments must be made to steel arrangements as detailed in
Figures 8.5.2(a) and (b).
- Move one P bar from hole location to each edge of hole providing
50 mm cover to each.
- Cut other P bars at hole and place the cut piece at other side of
hole in line with original bar.
- Place one longitudinal bar in bottom face at each side of hole
(perpendicular to P, same diameter as P).
- Place 4 - 20M diagonal bars (top and bottom).
FIGURE 8.5.2(a) REINFORCING DETAILS FOR LARGE ROUND OPENINGS
CUT 'P' IN FIELD AS REQUIRED
MAX 3 BARS
N2001
TF& BF
OF SLAB
(1-1.5 m LONG)
N 002
(SAME SIZE AS 'P'
1.5 m LONG)
TF & BF
SHIFT ONE 'P' BAR EACH SIDE
TO PROVIDE 50 mm MIN COVER
COVER
(TYP ALL BARS)
50 mm MIN
'P'

FIGURE 8.5.2(b) REINFORCING DETAILS FOR LARGE RECTANGULAR
OPENINGS
SHIFT ONE BAR TO
PROVIDE COVER
'P'
N20001 TF &
BF OF SLAB
(1.2 m LONG)
N 002 TF &
BF OF SLAB
(SAME SIZE AS
'P'. 1.5 m LONG)
CUT 'P' IN FIELD AS REQUIRED
MAX 3 BARS
50 mm MIN
COVER
(TYP ALL
'P'
AROUND)

8.6 RETAINING WALLS FOR CULVERTS
8.6.1 GENERAL
Table 8-6 provides the dimensions and reinforcement details for retaining
walls up to 3 metres high. Retaining walls more than 3 metres high shall
be designed by an Engineer.
The retaining walls listed in Table 8-6 are designed for situations where
the factored bearing capacity of the foundation material at the ultimate
limit state is not less than 300 kPa; the bearing capacity at serviceability
limit state is not less than 180 kPa; and, the factored coefficient of friction
between the underside of the footings and foundation material, used for
checking lateral sliding stability at the ultimate limit state, is not less than
0.4. Should the soil parameters at the site of the proposed construction
differ significantly from the above-described values, then the design of the
retaining wall should be referred to the Structural Engineer.
When retaining walls are required for a culvert, the structural standard
drawings may be used provided that the following information is added in
the space provided:
- A plan view of the culvert showing the layout and lengths of the
retaining walls.
- Modification of culvert walls to suit adjacent retaining walls.
- Retaining Wall Details - A plan, elevation and cross-sectional
view of each retaining wall showing dimensions and bar details
for walls.
- A steel bar list table for retaining wall reinforcement. (Note: this
may be combined with bar list for other special features).

8.6.2 PLAN VIEW OF CULVERT WITH RETAINING WALL
This detail should be drawn to a scale small enough to leave space
available for the other details mentioned above plus details of skewed end
treatments and special openings (holes) where applicable. The entire
length of culvert need not be shown; the barrel of the culvert may be
shown broken to conserve space.
The plan should include all dimensions shown in Figure 8.6.2, plus layout
dimensions for other special features.
FIGURE 8.6.2 PLAN VIEW OF TYPICAL CULVERT
L1
75°
L2
105°
15°
C
L
SPAN
17 m 23 m
HWY
C
L
FLOW
L3
30°
15°
L4
45°

8.6.3 MODIFICATION OF CULVERT TO SUIT RETAINING WALLS
The modifications described in this section are required to permit some
independent relative movement between the culvert and retaining wall.
Modifications to the header wall shall be made as shown in Figures
8.6.3(a), (b), and (c). For box culverts the apron wall shall be modified so
that it has the same configuration in plan view as the header wall. No
modification is required for box culverts with retaining walls perpendicular
to the longitudinal axis.
Figures 8.6.3(a), (b), and (c) indicate square-ended culverts. Details for
most skew-ended culverts are similar. In certain unusual circumstances
(such as when the skew angle of the culvert is greater than the angle
between retaining wall face and centre-line of culvert span) the location of
the construction joint must be adjusted to ensure that the wall can move
independently of the culvert.
The front face of the retaining wall shall meet the inside face of the culvert
wall at the end of the culvert. The construction joint between the retaining
wall and culvert shall be perpendicular to the front face of the retaining
wall and shall touch the outside corner of the culvert wall (for box culverts)
or the outside corner of the culvert footing (for open footing culverts).
In order to achieve the minimum depth of footing for frost protection, the
top of the retaining wall footing shall be set:
i. 300 mm below the elevation of the top of the bottom slab for box
culverts, or
ii. 600 mm below the elevation of the top of the footing of open
footing culverts.
The slope of the retaining wall top (where applicable) starts at the
construction joint adjacent to the header wall.
A note should be added to the drawings stating: "Asphalt paint shall be
supplied in accordance with CAN/CGSB-37.2-M88, coverage 2 square
metres per litre".

FIGURE 8.6.3(a) RETAINING WALLS PERPENDICULAR TO
LONGITUDINAL AXIS (open footing culverts)
TOP SLAB CULVERT LEG
CULVERT FOOTING
ADDED 15M BARS @ 300mm
70
mm
* ADDED
15M BARS
HEADER
WALL
K BAR
S BARS
CULVERT FOOTING
WIDTH
CONSTRUCTION JOINT (PAINT WITH
ASPHALT PAINT, INCLUDING FTG)
RETAINING WALL
FOOTING
RETAINING
WALL
FOOTING
WIDTH
THICKNESS
WALL
RETAINING
WALL
* Length of bar is the dimension from top of footing to top of
header wall minus 75 mm.
NOTE: Add bars to bar list of culvert. See Section 8.6.3 for note on
asphalt paint.

FIGURE 8.6.3(b) RETAINING WALLS NOT PERPENDICULAR TO
LONGITUDINAL AXIS (open footing culvert)
CULVERT FOOTING THICKNESS
WALL THICKNESS
3
0
0
m
m
HEADER
WALL
S BARS
END OF CULVERT
MASS CONCRETE TO
TOP OF FOOTING
*ADDED BARS
15M (AS REQ'D)
CULVERT FOOTING
MASS CONCRETE TO
TOP OF FOOTING
**ADDED 15M BARS @ 300 mm
CONSTRUCTION JOINT
(PAINT WITH ASPHALT
PAINT, INCLUDING
FOOTING)
RETAINING WALL
FOOTING WIDTH
RETAINING
WALL
* Length of bar is the dimension from top of footing to top of
header wall minus 75 mm.
** Bend top bar in field to suit as shown.
NOTE: See Section 8.6.3 for note on asphalt paint.

FIGURE 8.6.3(c) RETAINING WALLS NOT PERPENDICULAR TO
LONGITUDINAL AXIS (box culvert)
WALL THICKNESS
3
0
0
m
m
HEADER
WALL
T BARS
MASS CONCRETE TO
TOP OF FOOTING
*ADDED BARS
15M (AS REQ'D)
MASS CONCRETE TO
TOP OF FOOTING
**ADDED 15M BARS @ 300 mm
CONSTRUCTION JOINT
(PAINT WITH ASPHALT
PAINT, INCLUDING
FOOTING)
RETAINING WALL
FOOTING WIDTH
RETAINING
WALL
CULVERT WALL
* Length of bar is the dimension from bottom of culvert bottom slab
to top of header wall minus 75 mm.
** Bend top bar in field to suit as shown.
NOTE: See Section 8.6.3 for note on asphalt paint.

8.6.4 RETAINING WALL DETAILS
The following formulae provide the actual wall height of a full height
retaining wall (the distance from the top of the retaining wall footing to the
top of the header wall) immediately adjacent to a culvert with standard
header walls:
i. Open Footing Culverts
Actual Wall Height = Culvert Height + Top Slab Thickness
+ 900 mm
ii. Box Culverts
Actual Wall Height = Culvert Height + Top Slab Thickness
+ 600 mm
These formulations are correct for locations where the minimum depth of
frost cover is required.
Design tables for retaining walls of various heights are given in Table 8-6.
(a) Retaining Walls with Constant Height
The dimensions and bar details shown in Figure 8.6.4(a) should be
included for each applicable retaining wall. Where there is more than one
retaining wall of this type, each wall shall be designated by a letter of the
alphabet, e.g. Wall "A", Wall "B" etc. and the alphabetic symbol in the bar
designation shall be that of the wall, e.g. for "Wall B" use B 001 etc.
Section 8.6.4(b) explains how to adjust bars A15006 and A 007 for varying
height retaining walls.

FIGURE 8.6.4(a) TYPICAL RETAINING WALL DETAILS
mm
-A15004 @ 300 mm FF
-A 05@ mm BF
-A15006 @ 300 mm FF
-A15007 @ mm BF
-A15008 @ 300 mm BF
mm
600
mm
A 15002
A 15001
A 15003
-A 15002 @ mm
mm
mm
mm
-A 15001 @ 300 mm
A 005
A 15004
A 15001 @ 300 mm
100mm
A 15008
FRONT
FACE
BACK
FACE
A 15007
A 15006
A 005
75mm WALL
DRAIN
150mm x 50mm
KEY
A 15004
A 15002
A 15003

Where two or more walls have identical dimensions (i.e. same height and
same length) they may be given the same alphabetic symbol but each
must be designated by that symbol on the plan view and the title of the
detail must show the number of walls required.
e.g. DETAILS OF WALL ‘A’
[(2 REQUIRED)]
(b) Retaining Walls With Varying Height
For the purposes of design and detailing, retaining walls of this type are
divided into THEORETICAL zones each approximately 1.25 metres long,
as shown in Figure 8.6.4(b).
Note that this theoretical division will not appear on the final drawings
since there is NO joint of any kind between the zones.
Each 1.25 metre long zone is then designed using the data given on Table
8-6 for the highest portion of the wall in that zone.
FIGURE 8.6.4(b) DETAILING OF RETAINING WALL PANELS
1.25 m 1.25 m 1.25 m
DESIGN
HT
ZONE
1
DESIGN
HT
ZONE
2
DESIGN
HT
ZONE
3

Because the actual retaining wall height at the culvert usually depends on
the thickness of the culvert top slab, the retaining wall height adjacent to
the culvert will seldom correspond to the increments listed in Table 8-6.
For cases where the actual retaining wall height corresponds to an
increment listed in Table 8-6, the design wall height shall be the same.
When the actual wall height is not listed in Table 8-6, the design wall
height shall be the actual wall height rounded up to the next higher entry
on Table 8-6.
e.g. Actual Wall Height = 2.81 metres, use 3 metre design height
from Table 8-6
Actual Wall Height = 2.4 metres, use 2.4 metre design height
from Table 8-6
(c) Detailing of Steel Reinforcement
Front Face
- Dowels from footing (A15004) are always 15M @ 300
- For a design height of up to and including 1200 mm, A15004 bar
extends to the top of the retaining wall; A15006 bars are omitted.
- A15006 bars are always 15M @ 300 but vary in length. Longest
A15006 bar length for design height over 1200 mm is highest
actual wall height minus 50 mm. Shortest A15006 bar length for
design height over 1200 mm is lowest actual wall height minus
50 mm. Intermediately placed A15006 bars vary linearly in
length between these values.
- Length of sloping A15008 bars is dimension of sloping top of wall
minus 100 mm (front and back faces). If this length is within 100
mm of horizontal bar length, make sloping bars same as
horizontal bars.
Back Face
- Size, spacing and lengths of vertical bars are given in Table 8-6
for the selected design height.
- For design height up to and including 2400 mm, A 005 bar
extends to top of retaining wall; A15007 bar is omitted.

- Number of vertical bars for each type in first panel is
1175
BAR SPACING (mm)
+ 1
(round up decimal numbers to nearest whole number).
- Place first bar in 2nd panel so that distance from last bar in 1st
panel is not greater than spacing of bars in 2nd panel.
- Number of vertical bars for each type in 2nd panel is
Treat subsequent panels in similar manner.
- Add or subtract one bar in last panel if required to complete
reinforcing steel.
NOTE: If the design height of any panel is obtained by rounding up the actual wall
height to the next increment, then the top vertical bars in each face must
be shortened by the same amount as the height is rounded up.
(e.g. If actual wall height is 2.81 metres, design height is 3 metres, length
of vertical bars must be shortened by 190 mm.).
(d) Adjustment of Steel
The size or spacing of individual bars may be adjusted for convenience,
where necessary, provided that at least as much steel is provided at each
location as is called for in Table 8-6.
For instance, the bar arrangements in any panel may be continued into a
lower panel, partially or completely, in order to provide a more satisfactory
overall arrangement.

8.7 SPECIAL TREATMENT OF CULVERT ENDS
For aesthetic, economic or other reasons the designer may choose to
detail the end faces of the culvert with slopes matching the side slopes of
the adjacent roadway fill.
This treatment would improve the appearance of the culvert, reduce the
quantity of concrete required, and where formerly wingwalls might have
been necessary, none would be needed now.
The concrete culverts that have the ends tapered to match the roadway fill
slope, and have no traffic protection around them may be equipped with
the traversable safety grating. Figure 8.7 shows the schematic plan and
elevation of such grating. The criteria for this is given in 4.2.9.

TABLE 8-6 RETAINING WALL DETAILS
AT 3000mm C/C
150mm x 50mm KEY
600
300
400
A
H
1200
MIN
B
100
300mm UP TO 1.8m HEIGHT
400mm OVER 1.8m HEIGHT
75mm Ø WALL DRAIN
2
1
FORMED W/ NON-METALLIC
MATERIAL
300
0.05m³ OF 19.0mm CLEAR STONE
FOR EACH DRAIN IN
ACCORDANCE WITH OPSS 1004,
COMPLETELY WRAPPED WITH
GEOTEXTILE AND SECURELY TIED
A 15006
15M @ 300 C/C
A 15007
15M @ 250mm
LAPS WITH A 005
A 005
A 15002
100 25
A 15003
15M @ 300mm C/C
A 15004
15M @ 300mm C/C
A 15001
15M @ 300mm C/C
A 15008
15M @
300mm C/C
NOTES: Footing dimensions are based on an allowable
soil capacity of 180 kPa @ SLS and 300 kPa
@ ULS.
Reinforcing steel shall be grade 400 unless
otherwise noted.
Clear cover to reinforcing steel is 70 ± 20mm
unless otherwise noted.
Dimensions in millimeters, unless otherwise
noted.
Designed according to 2000 CHBDC
DIMENSIONS REINFORCING BAR DETAILS
H
A15002 A15003 A15004 A 005 A15006 A15007
(m)
A B C/C LGTH LGTH LGTH SIZE C/C B C D LGTH LGTH
1.2
1.8
2.4
3.0
1200 400 250 1100 2000 15 250 1340 470 300 - -
400
1600 250 1500 1290 -
250
15 1940 470 300 1750
700
2100 250 2000 1290 -
250
20 2540 470 300 2350
800
2600 200 2500 1290 1990
125
15 1690 470 300 2950
2000
2500
1100
1500
B
D
C
R = 300
DETAIL OF BAR TYPE A 005

FIGURE 8.7 TRAVERSABLE SAFETY GRATING FOR CONCRETE CULVERT
(ASSEMBLY DETAIL)

DETAILING MANUAL
DIVISION 9 – APPENDIX
August 2003

2003 03 14 APPENDIX Page 161
9 APPENDIX

9.1 APPENDIX A: HALF-SIZE PRINTS OF STANDARD DRAWINGS

9.2 APPENDIX B: REDUCED PRINT OF DESIGN DATA FORM FOR
CONCRETE CULVERTS

Rev.
July
2000
DESIGN
DATA
FOR
CONCRETE
CULVERTS
Sheet
______
of
______
Date
________________
Project
Engineer
_________________________________________
Group
WP
No
____________________
Group
WP
Location
____________________________________________________
Hwy
No
____________
District
_________________
Township
____________________________________
County
or
District
_____________________________
**
End
Treatment
WP
Range
or
Extension
Max
Cover
Over
Slab
Existing
New
Township
County
or
District
Station
Lot
Con
Type
of
Culvert
Span
S
Height
H
Total
Length
L*
Lt
Rt
F
Skew
No
Lt
Rt
Lt
Rt
Special
Treatment
and/or
Remarks
DESIGN
DATA
FORM
FOR
CONCRETE
CULVERTS

9.3 APPENDIX C: DEVIATIONS FROM CHBDC
The following items represent the design criteria used in the preparation of
this manual that deviates from the 2000 edition of the Canadian Highway
Bridge Design Code.
1) The minimum inside height of Concrete Box Culverts shall be
1.25 metres in order to facilitate formwork removal.
2) The minimum fill height considered in the culvert design tables is
0.6 meters.
3) Soil arching factors are based only on Type B1 installation.
4) The Frost Penetration requirements of clause 7.8.3.4 are
ignored, as OPSD 803.010 requires cover material to be
specified granular, i.e. non-frost-susceptible.
5) Load combination (d) in CHBDC Clause 7.8.4.1, pertaining to
earthquake has been excluded from this Manual.
6) Wheel Load Distribution Through Fill (Clause 6.9.6.) is revised as
follows: “When several distribution loads overlap, the total load
shall be considered as uniformly distributed over the area defined
by the outside limits of the individual areas. When the
dimensions of the composite distributed load area exceeds the
roof area, only that portion of the distributed load on the roof area
shall be considered in the design.” The wording given in the
code is at least unclear, or even incorrect.
7) Load combination in CHBDC clause 7.8.7.1 has been excluded
from this Manual.
8) The shear checks within 2d of the face of the support using
CHBDC clause 7.8.8.2.2, which refers to clause 8.10, have been
excluded from this Manual.
9) Temperature and shrinkage requirements for maximum spacing
of CHBDC Table 7.8.11.2 of 250 mm have been ignored.

9.4 APPENDIX D: MATERIAL AND CONSTRUCTION SPECIFICATIONS
FOR PRECAST REINFORCED CONCRETE BOX CULVERTS AND BOX
SEWERS
For single-cell culverts not exceeding 3 metres in span and for placement
under a minimum fill depth of 600 mm, the use of precast reinforced
concrete structure can be considered as an alternative.
Currently, the specification OPSS 1821 “Material Specification for Precast
Reinforced Concrete Box Culverts and Box Sewers” covers the
requirements for materials, design and fabrication of the single-cell
precast reinforced concrete box culverts with inside spans of 1.8 to 3.0
metres, and with inside rise from 0.9 to 2.4 metres. This specification is
based on the current bridge code as well as the “Prequalification
Requirements for Precast Concrete Drainage Products” published by the
OCPA. OPSS 422 “Construction Specification for Precast Reinforced
Concrete Box Culverts and Box Sewers” covers the requirements for the
installation of precast reinforced concrete box culverts and box storm
sewers in open cut.
The member companies of the Ontario Concrete Pipe Association (OCPA)
can however produce single-cell precast box culverts ranging in span from
900 mm to 4.2 metres and rise inside from 900 mm to 4.8 metres. Further
details can be obtained from OCPA Office.
For precast culverts with less than 0.6 m of fill, a reinforced distribution
slab is required to provide an improved live load shear transfer between
the units, as well as an enhanced live load distribution.

9.5 APPENDIX E: METHODOLOGY USED FOR RIGID FRAME CULVERT
DESIGN
9.5.1 GENERAL INFORMATION
The following design philosophy and method was the approach used to
produce the Detailing Tables and Standard Drawings given in this Culvert
Manual. The analysis was based on CHBDC Section 7 on Buried
Structures, and the relevant clauses of Sections 3, 6 and 8.
The Assumptions, Design Criteria, Dead and Live Load Distributions, and
Method of Design used are detailed in the following sections.
9.5.2 ASSUMPTIONS
Unit Weight of Soil ………………….20.0 kN/m3
Concrete……………………………...24.0 kN/m3
Asphalt……………………………..…23.5 kN/m3
Water……………………………...…..10.0 kN/m3
Class of Concrete …………………...30 MPa
Reinforcing Steel …………………….400 MPa
Clear Cover to Reinforcing Steel …. as given on the Standard Drawings
Design Code ………………………… CHBDC-2000
9.5.3 DESIGN CRITERIA
LOADING considered: Load Factors for ULS
1. Dead Load of Concrete Self-Weight………..…...[αmax=1.20, αmin=0.90]
2. Dead Load of Earth Fill + asphalt (MV=1.2)…..…[αmax=1.25, αmin=0.80]
(only installation Type B1 considered)
3. Lateral Earth Pressure (Mh=0.5 or 0.3)……..…..[αmax=1.25, αmin=0.80]
(only installation Type B1 considered)
4. Water Load (inside or outside of culvert)…..…...[αmax=1.10, αmin=0.90]
5. Live Load (incl. DLA) – Vertical wheel load……..[αmax=1.70, αmin=0.00]
– Approaching wheel load..[αmax=1.70, αmin=0.00]

Note:
- Dead Load is always present.
- Culverts in Ontario are designed only for Type B1 installation.
- Due to vertical negative arching, the load due to earth fill is 120%
of the soil weight.
- Due to horizontal arching, earth pressure coefficients are in the
range between values of 0.3 and 0.5.
- Water Load can be applied
(a) inside the culvert (loads the walls and the bottom slab)
(b) inside & outside of the culvert
(c) outside the culvert (loads only the walls)
When Water load is applied on the outside of the culvert, the
affected earth pressure height uses the submerged unit
weight of soil, in addition to water pressure.
- Live Load is applied either as the wheel loads of a truck(s) acting
Vertically and distributed to the top of the culvert through the soil,
or as Approaching wheel loads applied through the soil to one or
both sides of the culvert as lateral earth pressure. Vertical and
Approaching wheel loads are not applied at the same time.
LOADING COMBINATIONS:
According to Section 7 of the CHBDC, and without consideration of
Earthquake loading, the following 3 Load Combinations at ULS were
considered:
L.C.#1 = Dead Load(concrete + earth fill)
+E.P.(min)
+Water+Live Load(vertical)
+E.P.(max)
+Water+Live Load(vertical)
+E.P.(min)
+Water+Live Load(approaching)
where E.P. = Lateral Earth Pressure
With each of the Loading Combinations, the Load Factors are chosen for
each individual load and combined in such a way as to produce maximum
load effects such as Moments, Shears, Axial Forces and Reactions.
In general, one loading will maximise the vertical and minimise the
horizontal loading, while another loading will maximise the horizontal and

minimise the vertical loading. Operating between these two extremes are
as many other load combinations as are required to consider every
possible case. If a computer program such as OMBAS or CANBAS does
the analysis, the extreme (governing) values can be selected from the
envelope of results. If the analysis were done manually or by a computer
program that needs additional manual input, a preliminary analysis in
addition to an accurate prediction of deflected shapes and moment
diagrams due to relative loadings would be an asset.
The load combination of CHBDC clause 7.8.7.1 has been excluded from
this Manual.
9.5.4 DEAD AND LIVE LOAD DISTRIBUTIONS
DEAD LOAD DISTRIBUTION:
According to CHBDC, and documented by considerable research results,
arching takes place in the soil in both the vertical as well as the horizontal
directions.
Unless special construction techniques are utilised, the soil weight transfer
from above the culvert to the top of the culvert (vertical loading) exhibits
negative arching, resulting in a 20% increase in effective soil weight
loading applied. This Culvert Manual does not consider any special
construction techniques whereby the applied loading could be reduced.
Numerous research papers discuss the possible methods (such as using
some depth of compressible material directly on top of the culvert)
whereby a portion of the settling fill above the culvert transfers a portion of
its weight away from the culvert to the adjacent fill, reducing the actual soil
weight that gets applied to the culvert.
In the horizontal direction, the effect of arching is such that it can be
described in the traditional equivalent fluid pressure approach as having
minimum and maximum coefficients of 0.3 and 0.5, for Type B1
installation.
LIVE LOAD DISTRIBUTION:
With respect to the direction of the Truck travel, the Live Load (wheel
loads) is distributed in both the Transverse and Longitudinal directions.
This distribution starts from the footprint dimensions of the truck wheel
load(s), 600 mm (transverse) x 250 mm (longitudinal).
For distribution in the Transverse direction, 2 trucks in adjacent 3.0 m
lanes, reduced to 90% because of multi-lane loading, represents the

governing (maximum) loading. The DLA varies according to the depth of
fill. The width of distribution, at any depth H, is equal to the maximum
extent of all 4 wheel loads distributed according to [0.6 m + 1.75H].
For distribution in the Longitudinal direction, the nominal width of
distribution, at any depth H, is equal to the maximum extent of the wheels
from axles 2 and 3 of the CHBDC truck, distributed according to [0.25 m +
1.75H]. However, deviating from CHBDC, when the Live Load distribution
overlaps and goes beyond the width of the culvert, for the actual width of
distribution, apply to the culvert only the portion of the loading that is
directly above the culvert.
9.5.5 METHOD OF ANALYSIS / DESIGN
1. With the aid of OMBAS modified for CHBDC, and based on the
governing load combinations, the Bending Moment envelope,
Shear, Axial Force and Reactions were calculated.
2. Based on assumed concrete thickness, reinforcing area and
length of bars, the capacity of the relevant section was
calculated, (as PxM interaction) and compared to the applied
Moment and Axial Load.
3. Shear was checked, by comparing applied force to shear
capacity in accordance with CHBDC section 8, clauses 8.9.3 and
8.9.4. The shear within 2d of the face of the support was not
checked using clause CHBDC clause 8.10.
4. Sliding was checked, for open-footing culverts, using factored
horizontal reaction and unfactored vertical reaction.
5. The assumed reinforcing, lap and embedment length required,
was checked.
6. If any criteria was not satisfied, the relevant detail was modified
and calculations repeated until all code requirements were met.

9.5.6 TEMPERATURE AND SHRINKAGE STEEL
The maximum spacing of temperature and shrinkage steel was
established as 300 mm in lieu of the requirements of Table 7.8.11.2 of
CHBDC.

DETAILING MANUAL
INDEX
August 2003

2003 08 08 INDEX Page 175
Aesthetics 158
Apron Wall 3, 7, 10, 12, 14, 73, 75, 77, 78, 125, 127,
128, 129, 133-134, 139, 149
Bearing Capacity 3, 19, 20, 147
Bearing Pressure 19, 20, 23
Box Culvert 1, 3, 5, 7, 8, 10, 11, 12, 14, 20, 73-79,
125-130, 131, 133, 139, 149, 152, 153, 168,
169
Cast-in-Place Culverts 6, 8, 9, 20
Catch Basins 7, 143-146
CHBDC 5, 6, 7, 9, 16, 73, 159, 168, 169, 170, 171,
172, 173, 174
Construction Joints 16, 17, 73, 74, 125, 126, 133, 138, 149, 150,
151, 152
Culvert Extensions 3, 9, 23, 76, 128, 142
Detailing Table 5, 9, 12, 16, 19, 21, 23, 25, 27, 28-72, 73, 76,
77, 78, 79, 80-124, 125, 128, 129, 130, 132,
170
Drain 7, 8, 143-146
End Treatment 8, 148, 158
Fanned Bars 139-141
Fill Height 3, 8, 9, 11, 23, 28-72, 76, 80-124, 125, 128,
130, 168, 169, 172, 173
Footing Reaction 19
Friction Coefficient 6, 147
Frost Protection 16, 149, 153, 168
Geotechnical Engineer 3, 19, 20

2003 08 08 INDEX Page 176
Haunch 3, 14, 16, 23, 73, 75, 76, 125, 143
Header Wall 3, 7, 10, 12, 14, 16, 18, 24, 25, 26, 73, 75,
77, 78, 135-138, 139, 142, 149-153
Height 3, 8, 11, 16, 17, 23, 28-72, 74, 76, 80-124,
126, 128, 130, 153, 155, 156, 157, 168, 171
Lateral Sliding 19, 20, 147
Length(Culvert) 3, 5, 9, 10, 23, 24, 76, 77, 78, 128, 131, 132,
155
Longitudinal Axis 3, 4, 5, 6, 149, 150, 151, 152
Manhole 7, 143-146
Non-Rigid Frame Culvert 1, 4, 8, 9, 12, 125-130
Open Footing Culvert 1, 3, 4, 5, 7, 8, 11, 12, 14, 16-27, 131, 149,
150, 151, 153, 173
Precast Concrete Box Culvert 8, 9, 169
Reinforcing Steel 7, 13, 14, 15, 16, 17, 18, 25, 26, 27, 28-72,
73, 74, 75, 77, 78, 79, 80-124, 125, 126, 127,
129, 130, 131-132, 134, 136-137, 139-140,
143, 144, 145, 146, 147, 156-157, 159, 173
Retaining Wall 4, 7, 9, 10, 12, 13, 14, 16, 23, 73, 76, 128,
147-159
Rigid Frame Culvert 1, 4, 8, 9, 11, 12, 14, 16-27, 73-79, 170-173
Scales 13
Set 4, 25, 78, 129, 131, 132
Skew Angle 4, 6, 7, 8, 10, 139-140, 149
Skew Number 4
Skewed End Culvert 4, 5, 7, 9, 10, 12, 13, 23, 25, 76, 78 133, 134,
135, 136, 137, 139-141, 148, 149

2003 08 08 INDEX Page 177
Span 4, 5, 8, 11, 17, 23, 28-72, 74, 76, 80-124,
126, 128, 130, 149, 169
Standard Concrete Culvert 4, 7, 8, 9, 11, 12, 16, 73, 125, 132
Standard Drawing 1, 2, 7, 9, 10, 12-13, 23-25, 76-77, 128-129,
134, 136, 139, 143, 147, 162-165, 170
Steel Schedule 15
Structural Engineer 3, 4, 19, 143, 147
Strut 4, 20
Traversable Safety Grating 4, 10, 158, 160
Wingwalls 158

Concrete box culvert design and detailing (british)

More Related Content

What's hot

Recently uploaded

Concrete box culvert design and detailing (british)