CV_181214

CV_181214

• 1.
  Josef Saberi 12-12-14 MSc.Mechanical Engineer Work: DAF Trucks N.V. Hugo vd Goeslaan 1 5643 TW, Eindhoven The Netherlands E-mail: [email protected] E-mail: [email protected] Brief summary of work experience - Research engineer in NVH - Advanced engineering strength of materials :Altair Hyperworks, Nastran, ABAQUS, Matlab - Advanced engineering thermo-fluid dynamic: CD-Adapco: CCM+, RadTherm - Project management - Product launch (Automotive) - Quality (DFSS-Black Belt, APQP, PPAP) - Requirement setting (Engine installation systems) Working experience countriesoutside of home country(Sweden) - Volvo Cars Corporation: Exaptriate to The Netherlands1997 to 2001 - Volvo Cars Corporation: Exaptriate to Germany 2001 to 2006 - Volvo Cars Corporation: Exaptriate to Belgium 2006 to 2007 - Viro Engineering: The Netherlands: 2007 to 2008 - DAF Trucks BV: The Netherlands 2008 until current time FormalEducation - Mechanical Engineering MSc. Chalmers University of Technology, Gothenburg, Sweden, 1987-1991 - Control automatic, Mathematical modeling and simulation Chalmers University of Technology, Gothenburg, Sweden, 1991-1992 - Stochastically load distribution Chalmers University of Technology, Gothenburg, Sweden, 1991-1992 - Design for Six sigma, Certified 6Sigma Black Belt Volvo Cars, Gothenburg, Sweden, 2006-2007 - Six Sigma Green Belt, Certified Ford Motor Company, John Andrew's development Centre, Köln, Germany, 2006 - Design for sound quality Massachusetts Institute of Technology, Boston, USA, 1997
• 2.
  - Application ofvirtual reality as a design method in automotive engineering Virtual Reality Centre, Gothenburg, Sweden, 1995 Work experiences DAF Trucks BV., Eindhoven, The Netherlands, 2010-current POSITION: Technical Specialist and DFSS Black Belt - Responsibilities: o Advanced engineering strength of materials (Altair Hyperworks, Nastran, ABAQUS, Matlab) o Advanced engineering thermo-fluid dynamic (CD-Adapco: CCM+, RadTherm) o Technical support and advice of engine installation team (Air intake, Exhaust, Cooling, Intarder, PTO, Engine mounts, Noise encapsulation and gear shift systems) o DFSS, input and review o Support of team with resolving FRACAS concerns o Review and analysis suppliers technical reports o GRPA, input and review DAF Trucks BV., Eindhoven, The Netherlands, 2010-current POSITION: Technical Specialist and DFSS Black Belt - Responsibilities: o Implementing of DFSS procedure in engine installation department o Advanced engineering thermo-fluid dynamic (CD-Adapco: CCM+, RadTherm) o Implementing of APQP process in Engine Installation Department o System requirement setting o Support of team with resolving of the field and production concerns o Review and evaluation of suppliers technical reports o Supervising of student for Dipl. Eng. In process mapping VIRO Engineering, Echt, The Netherlands, 2007-2008 POSITION: Development engineer Volvo Cars Corporation, Gothenburg, Sweden, 2007 POSITION: Principal Engineer
• 3.
  Volvo Cars Corporation,Gent, Belgium, 2006-2007 POSITION: Project manager Power-train Medium Car Platform - Responsibilities: o Review and analysis of warranty data, market concerns, and product follow-up information o Run 8D process for defined heavy item issues o Set up implementation plan for interim and permanent solutions o Cost, time and quality control of containment and final solutions o Review and optimizing of the production process from cost and quality point of view o Synchronizing and implementation of design changes in production plant o Running 6 Sigma projects on heavy item with high impact on customer satisfaction o Manufacturing process controls of supplier’s JIT plants o Design review, PFMEA, PPAP and Launch readiness review at supplier o Launch support within the responsibility area Volvo Cars Corporation/ Ford Motor Company, John Andrew's Development Centre, Köln, Germany, 2003-2006 POSITION: Local office manager, Medium Car Platform - Responsibilities: o Cooling systems, heat protection systems, air intake and exhaust systems from design to industrialization Volvo Cars Corporation/ Ford Motor Company, John Andrew's Development Centre, Köln, Germany, 2001-2003 POSITION: Volvo Cars Brand Leader of Medium Car Platform - Responsibilities: o Cooling systems, heat protection systems, air intake and exhaust systems from design to industrialization o Analysis and sign-off of advanced engineering reports o Analysis and sign-off of verification tests o Lead the target agreement process with suppliers o Lead the design review with suppliers and R&D o Design verification planning o Cost control management o Lead the quality control as robustness and reliability control, DFMEA, APQP o Manage the deliverables according program milestones as Production Try- Out, Try-Out and Start of production o Launch readiness review at suppliers Volvo Cars Netherlands, NedCar, Helmond, The Netherlands, 1997-2001 POSITION: Principal engineer - Responsibilities: o Advanced engineering, Supporting of design groups with Thermo-fluid dynamics and noise analysis
• 4.
  Volvo Cars Corporation,Gothenburg, Sweden, 1995-1997 POSITION: Principal engineer - Responsibilities: o Thermo-fluid dynamics analysis and Computation fluid dynamics, Engine Simulation (1D CFD code WAVE) for noise predictions Special honors - Entry into the Marquis "Who's Who in Science and Engineering, 2003 " Additionalprofessionalactivities - Lectures in fundamentals of acoustics for employees at Ford Motor Company, Köln, Germany ,2001 - Supervising of students from Charmers University of Technology for their M.Sc. thesis (Two different jobs in Vibration and material fields), Volvo Cars, Gothenburg, Sweden, 1996-1997 - Lectures for employees of Volvo Cars Service in Sweden and Italy in the field quality and design philosophy 1996 and 2004 Patents - WO2013137721, Application number 13720095.2 (The international publication has been made): DAF Trucks N.V., Eindhoven, The Netherlands. 2013, Title: “Truck Provided with A Device for lowering the temperature of the exhaust gas” “https://register.epo.org/application?number=EP13720095” - WO1999025962A1: Volvo Car Corporation, Gothenburg, Sweden, 2003, Title, “Device and method for a sound-attenuating unit”, - WO-9925962, Registered International Patent: Volvo Car Corporation, Gothenburg, Sweden, Title: “Self-control variable device for reduction of the radiated noise from tail pipe of exhaust systems”, 1996-1997 SpecialHonors - Registered in the Marquis "Who's Who in Science and Engineering", 2003 - Awarded by chassis department of Volvo Car for outstanding work at Ford Development Centre, Köln, Germany, 2002 Languages - Swedish, English (Fluent) - Dutch (intermediate) - German (beginner)