Detail explain railway station by Suman kumar

Detail explain railway station by Suman kumar

• 2.
  WELCOME STATION TO BY- suman Kumar
• 3.
   Station A railwaystation is a building by railway line where train stop so That people can get on or off .  Used -  Based on operational basis Based basis on functional STATION  Block stations  Non-block stations  Special class station  Wayside station  Junction stations  Terminal station  For exchange of passenger  Control of train  Crossing , sorting, of train etc.
• 4.
   BLOCK station The block station are further divided into three type A block station is a station at which the driver has to obtain an authority to proceed in order to enter the next block station.  Class A’ stations  Class B’ stations  Class C’ stations
• 5.
  “A” class station Whereline clear may not be given for a train unless the line on which it is intended to receive the train is clear for at least 400 mts.. Beyond home signal or up to the starter.  Here are some example of a category railway station  Bathinda junction railway station. Located in Ambala railway division  Rampur hat junction railway station  Kalyan junction railway station
• 6.
  “B” Class station Whereline clear may be given for a train before the line has been cleared for the reception of the train within the station section. Outer signal :first stop signal Home signal : placed at an adequate distance from the outer signal . ( 580m from outer signal)
• 7.
  “C” class station Cclass station is a railway station or block hut that mark the end of a block station and has light traffic or no trains booked to stop C class station may exist as signal cabins that control the approach to another station . Permission to approach a c class station may be not given until the least 400m beyond the home signal and is still moving
• 8.
   Non- blockstations A non block stations , also known as a D class station , is a railway station that’ located between two block station and doesn’t mark the end of a block section .  Non block stations don’t have signals or staff to control movement of train
• 9.
  Special class stations A special class station on Indian Railway is a station that doesn’t fall into any of the A ,B, C, or D classes . Special class station are subject to specific working rules issued by the commissioner of Rail safety  Classification Based on Functional Characteristics 1. Wayside Stations A Way side station consist of an arrangement for crossing an up and down train or for overtaking the slower moving train by the fast moving train . These are located on a running line at suitable places.  Way side stations are following types. 1. Halt stations 2. Flag stations 3.Crossing station
• 10.
  Halt station A haltstation is a small and simple railway station with few or no facilities and usually no staff. the ̣ stations are designed for specific trains to make scheduled stops and they are different from junctions because they don’t’ have signals.
• 11.
   Flag station TheRailway Station Are The Similar To Halt But Have Buildings And Staff . These Station Has Movement Of The Trains Are Controlled By Showing Flag.
• 12.
  Crossing station These stationhave facilities for crossing of an up and down train . Crossing station are provide one loop line so that train is sliding on loop. The other train can cross it.
• 13.
   2. Junctionstations A Junction station is a station where three or more train lines coverage or diverge is called junction station . o At junction station has special arrangements are made to full fill the requirement . I. To facilitate the interchange of traffic between main and branch lines. II. To change direction of engine III. To repair and clean the train
• 14.
   3. Terminalline A terminal railway station is a station at the end of a railway line where trains terminate or reverse out of the station