Di splay systems

B. Rajesh Kumar
DISPLAY SYSTEMS Roll no: 12
INTRODUCTION:
Newer display technologies continue to evolve, in synchronism
with modern-day convergence devices and systems. However, the general
awareness and knowledge about display systems are on a lower level,
compared to the hype of related developments in the convergence arena. A
concerted port is needed by the diverse fields to develop effective, efficient,
and economical display systems.
What are display systems?
Display systems are the focal point of any human-machine
interface. Applications range from digital watches, finger tops, palmtops,
laptops, mobile phones, digital cameras, PC monitors, and TV’s to public
scale hoardings and air-base displays. Related innovations have enabled
display systems to synchronize the corresponding advances in micro
electronics, IT, and telecommunication fields. The role of electronic
displays is becoming increasingly crucial consumer electronics, office
automation, information processing, entertainment, intelligent
offices/homes, interactive services, teleshopping/conferences, trade-
fairs/exhibitions, etc.
Display techniques form an essential component of any
industry, be it any manufacturing, process control, education,
advertising/marketing, automobile, chemical electronic, nuclear, publicity,
public information, or any other area can conceptualize. Trade shows,
executions, seminars, etc effectively use electronic displays to highlight
their product innovations. Thousands of visitors stroll through the exhibit
halls, of which most flock around those booths that offer moving-image
display.
Display form a crucial link in the functioning of convergence
systems. Product manufacturers can easily capitalize on these systems. All
it takes is a little more bragging on their part.
Technique behind Display Systems:
Electronic devices convert electronic signal information to
specific locations on display screens. Each location must adjust to the
1

B. Rajesh Kumar
requisite brightness and colour for that portion of the image. Display
systems use a wide range of modalities categorized mainly into direct view
and projection systems. Direct view systems enable the users to view the
display screen directly. Projection systems first create the image on an
internal screen, subsequently using optical devices to magnify and project
images onto a larger external screen.
These displays can also be classified as light-emitting and non-
light-emitting devices. Light-emitting devices include cathode-ray tubes
(CRT’s), electroluminescent (EL), plasma display panels (PDP’s), vacuum
fluorescent displays (VFD’s), field-emission displays (FED’s), and light-
emitting diodes (LED’s). Non-light-emitting displays include liquid crystal
displays (LCD’s) and electro chromic displays (ECD’s).
Industry Scenario:
A sampled interaction with the display industry reveals
interesting aspects about this seemingly innocuous and taken-for-granted
field.
S.K.Garg, president, Super-Vu International, a leading
domestic player and exporter, emphasizes that the display technology is
changing very fast. Obsolescence is very fast. For instance multimedia data
projectors marketed by Indian companies get outdated in only 3 to 6
months. An SVGA model is outdated in six months, since it can be
upgraded using technology available, Plasma displays, developed by
America and Japan, are expensive. These support only VGA video inputs,
and cost Rs. 5,50,000 per unit. Super Vu has developed a 114cm Plasma
Vision display system that costs only Rs 75,000. This simple system
integrates flexibility of up gradation and transportation.
India is a vast untapped market for display systems. Mr.Garg is
of the opinion that, both in terms of quality and cost, we can complete with
imported versions. We have the capability to design and manufacture large
video walls at half the cost of imported models. The company has a
development facility to design and fabricate sophisticated optical systems
for any application. Based on the feedback and techoeconomic requirement,
display systems have been developed for various applications.
2

B. Rajesh Kumar
‘Plasma Vision’ (compact, portable rear-projection monitor),
‘Display Vision’ (standalone large-screen, rear-projection monitor),
‘Movision’ (portable, powerful, high-resolution display), ‘Media Vision’
(large-screen interactive multimedia presentation tool), and ‘Video wall /
Video cube’ (large screen display) are some display products that have good
demand in the domestic and global markets. Applications include
showrooms, corporate presentations, simulators, command and control
centers, large drawing-rooms, halls, exhibitions, heavy-traffic public places,
and training sessions.
There are few Indian companies with the requisite
infrastructure to design and develop, or even assemble, a complete range of
projection systems. R.D. Vaghela, CEO, Infra Control Systems, reveals that
the trend worldwide is to use smart display systems that can be activated by
pager networks at specified time for advertisement booking time-slots. In
European countries displays depict news flash of important events, weather
information, etc.
These are used in factories for production data analysis and
display of MIS (Managerial Information Systems) information pertaining to
number of parts to be produced per day, actual production, and rejected
parts. In the assembly line, time taken by technicians in each zone is
displayed. If it is longer than the stipulated time, reason for the efficiency or
any mechanical problem of the assembly is found and rectified. Common
usage areas include stock and commodity exchange update, manufacturing /
warehouse data management and employee and safety communications in
large facilities.
Corporates use displays with RS48 interface, enabling 255
displays to be attached to one computer. Centralized computers transfer data
to various locations, according to ID number given to each display. Same
message can transmitted to all displays in emergent situations. Displays can
accept pager situation data. Display messages can be entered by wireless
remote control keyboard, computers using dedicated software, and paging
date receivers.
Personal priority display (PPD) is popular abroad. Specifically
designed for high-priority desktop messages, it communicates critical, time
sensitive information to workstations. It is statically placed inside helpdesks
3

B. Rajesh Kumar
in customer service workstations / cells, office and lobbies, so that critical
data is immediately and easily available.
In India, displays are mainly use passing general and online
information. Power utility companies display online production data and
related crucial parameters. Mr.Vaghela explains that Indian industry is
installing silent message displays and studying their impact on viewers.
Displays are ideal communication tools.
Jayant Shah, partner, Automobile Industries, leading
manufacturer electronic displays, feels that there is need to increase public
awareness usage of this technology. Since 1999 electronic displays have
been a vital display communication media over the world. Automotive
Industries has developed innovative LED displays, signs and calendar
clocks.
Indian electronic display industry is growing. Industries use
displays for production and safety signs. Displays on roadways
communicate civic messages and advertisements. Sunil Shah, partner,
Jaydeep Industrial Corp., reveals that companies prefer to install LED
displays that are more economical than LCD and plasma, Mr.Shah laments
that the sales of display products are affected by high sales tax. As more
corporates and government organizations are using display systems, there is
a scope for growth. The display industry should take care to develop quality
products, to sustain this growth.
TOUCH-SCREEN DISPLAY:
Touch systems as GUI(graphical-user interface) devices for
computers continue to grow in popularity. For many applications such as
ATMs POS (Point-of-sales) systems, industrial controls, and handheld
computers, touch screens are an essential user interface, not just a keyboard
alternative.
The touch system comprises touch sensor (to receive the touch
input), electronic controller (to read and translate the sensor input into a
conventional bus protocol; for example, serial USB), software driver (to
convert the bus information to cursor action), and system utilities, Vacuum-
deposited transparent conductors serve as the primary sensing element in
4

B. Rajesh Kumar
both capacitive and resistive touch sensors- the two most common touch
sensors.
Touch systems using resistive sensors account for 56 per cent
of the touch market, with 43 per cent going to high volume consumer
applications. These applications predominantly utilize ‘pen input’; for
example, PDAs. Premium applications, such as retail POS, or those where
glove input is most frequent, such as medical and clean-room displays,
make up the balance of the resistive market.
Capacitive touch systems account for 25 per cent of the global
touch market sales. Known for their durability, reliability, and fast response,
those sensors service public-access touch-screen applications, such as
information kiosks, ATMs, and casino gaming. These systems activate with
either human finger touch or an electrically active tethered pen.
Touch systems represent a rapidly growing subset of the
display market. Palas Software and Micro touch, USA, have pioneered
usage of state-of-the-art ‘Micro touch’ screens in India. Micro touch,
Boston, is a world leader in touch technology. Its patented ‘ClearTek’
touch-screen is sensitive. It registers the lightest touch, with high resolution,
and requires the shortest touch contact. It is the only technology unaffected
by dust in the world, which makes it ideal for Indian conditions.
Other touch-screen innovations include intelligent pen-and-
touch input with ‘TouchPen’, ‘Tek resistive’, and ‘Thru Glass’ systems. Use
of touch-screen installations is increasing in India. Applications include
games / entertainment, industrial / medical instrumentation, financial
trading, ATMs, POS terminals, retailing kiosks, multimedia kiosks, etc.
Micro Touch has a major share of the global touch-screen
market. Rajiv Srivastava, director, Palas Software and Micro touch India,
predicts touch screens will be the future input interface for computerized
systems. The worlds over these systems are being utilized as user friendly
interfaces, obviating the need for computer and keyboard skills. In the
Indian context, people with low literacy levels can benefit from the system.
Public information systems, such as railways, use these
systems for booking offices. Travelers can confirm reservation by touching
the ‘PNR number’ location on the screen. Even illiterates can use and
5

B. Rajesh Kumar
benefit from the system. Touch screen can be sued for accessing
information in any language. Bill Gates, chairman, Microsoft, predicts that
it will emerge as a vital computer interface.
‘ClearTek’ touch-screen uses analogue capacitive technology- the
only touch technology based on sensing electrical signals. It has a resolution
of 1024 x 1024 touch points. The controller averages the entire area of
finger contact to a single point, giving users pixel by pixel control.
ClearTek also provides the fastest response of any touch-
screen, with a minimum touch contact requirement of 3 cms. This
performance offers virtually instant response and makes it ideal for various
applications, including gaming and kiosks, where environmental robustness
is a necessity. Most public access kiosks in India use ClearTek.
Thru Glass is a revolutionary concept in computer input
devices, based on a patented projected capacitive touch technology. It can
detect a touch through 2.5cm thickness of glass, plastic, or non-conductive
protective materials. This versatile technology can be used with multimedia
system installed in environmentally controlled kiosks to create vandal-
proof, unattended, outdoor application.
For the rigid demands of a factory floor, Thru Glass is the
perfect solutions capable of being activated with any conductive input
device including glove hands and metal tools. Impervious to rain, snow,
chemical and sunlight, brings the power of touch into new environments.
‘TouchPen’ is a proprietary capacitive digitizer using Micro
Touch’s analogue capacitive touch technology. It is only technology that
can distinguish between touch and pen input. It works by generating a
uniform low-voltage field over the sensor and determines the touch location
in the same way as the analogue capacitive screen does. A pen location is
determined when the pen injects current onto the conductive surface. The
touch contact requirement 3 cms. The response speed is 8 to 15 cms and
200 points per second in pen model.
With a resolution of 2048 x 2048 touch points, the digitizer is
fast and precise enough for signature capture, image manipulation, and
6

B. Rajesh Kumar
annotation. It is offered as a standard option with an analogue capacitive
kits and monitors.
Shonkh Technologies has developed information kiosks with
LCD/CRT touch screens, adding power to interactivity. Basically, a kiosk is
an information centre. It can be a standalone system connected to a server,
or to the Internet, enabling users to access the information bank. Kiosks
have bridged the gap between the computer-literate and the non computer-
literate individuals.
LASER IMAGING:
A German company has developed laser imaging technology,
endowed with best colour properties. Laser display projections obviate the
need to focus the protector to adjust for the distance between the projector
and the screen. These provide clear, non-reversed images on the screens of
any size. Laser beams travel over the screen incredibly impact, creating on
it a succession of images made up of pixels and lines. The pixel and frame
rates are the same as of the common video standards.
The laser imaging method can use signals from all standard
norms, included analogue, digital, and HDTV, readies of whether these are
received an aerial or video recorder.
The multisync and multimedia capabilities of laser projections
make them for events, shows, exhibitions, and conference rooms. A small
projection head attached to the ceiling in a domestic living room can beam
life-like video images measuring 1.5 m (diagonal) at an angle from one of
the walls of the room.
ORGANIC EL DISPLAYS:
Most flat panels in the market are LCDs. But LCDs are essentially
non light-emitting devices. This imposes technical limitations on the quality
of ability they offer. So, the display industry is forced to continue R&D
efforts for displays that emit their own light. Such displays include PDPs,
FEDs, and EL displays.
7

B. Rajesh Kumar
Organic electroluminescence (EL) displays, in addition to
emitting their own light, provide wide viewing angles, feature a strong
contrast, and deliver a quick response speed. These possess strong
characteristics in areas where LCDs are weak. These use fluorescent
organic compounds as luminescent materials.
Researchers at Tohou Pioneer Corp., Japan, experimenting
with compounds having low molecular weights, developed element
technologies necessary to create organic EL displays. They brought out an
organic EL display for car radios. To form devices made of low molecular
weight compounds, vacuum evaporation techniques are used to deposit
organic compounds with different carrier transport factors between
electrodes possessing different work functions. Glass or plastic film
substrates use indium-tin oxide (ITO) as the positive electrode, with a high
work function of 5.0 eV, performing as a hole injection electrode. The EL
devices basically consist of cathode (Li-Al or Mg-Ag), electron transport
layer (Alg3), emission layer with dopant (Alg3, quinacridone, or
coumarine), hole transport layer (amine-based compound), anode, and
substrate.
The advanced organic EL dot-matrix device developed by the
company has green monochrome display section with 265 x 64 dots and
single-matrix drive structure. The displays have panel and drive circuit
sections. The resulting display, with superior brightness, contrast, and
visibility, can be viewed at any angle. To take full advantage of the self-
emitting characteristics of EL devices, the external light is blocked,
preventing it from entering the panel and reducing contrast.
Researchers continue to seek ways of making organic LEDs
more efficient and longer lasting. They have succeeded on both counts by
using new materials and by combining materials is new ways, creating
displays lasting 10,000 hours and delivering a luminous efficiency of 12
lumens per watt.
Organic EL displays find usage in the display section of
Pioneer’s vehicle use FM teletex receivers. Demands are on the increase
from manufacturers of car stereo systems. These displays will also be
supplied for various other devices, including PDAs.
8

B. Rajesh Kumar
LEPs:
LEPs are flat, wall-hanging displays that are produced using
plastic layers. These were invented by Richard Friend, University of
Cambridge, in 1989. Cambridge Display Technology (CDT) demonstrated
the first LEP-based monochrome flat TV screen in 1998.
LEPs operate on supply voltages of 3V and less, with wide viewing
angles. This light-emitting device is a layer structure deposited on a
transparent substrate. The substrate is coated with a transparent conducting
layer, ITO, which is used as a hole injector. ITO has a rough surface relative
to LEP. It is coated with a conducting polymer. The second electrode (a
film of calcium over laid with another film of aluminium) is deposited on
the LEP layer, completing the sandwich structure of the device. Electrons
and holes, injected into the LEP from cathode and anode, recombine to form
excitons that radiate photons during decay. The band-gap and colour
emission can be varied through the visible light spectrum (from blue
through the red).
CDT has linked up with Seiko-Epson, Philips, Hoest, Seiko,
and DuPont, to undertake development work on various aspects of LEP-
based display. Philips is introducing multi colour displays for mobile
phones, while Seiko is working on a large-area flat screen with full-colour
video display.
VIDEO DIGITAL INTERFACE
An industry working group, led by Intel and backed by
Compaq, Dell, Fujitsu, Hewlett-Packard, IBM, NEC, Microsoft and Silicon
Image is developing a digital interface technique. This technique will
eventually link consumer electronics, PCs, or any host system to digital
display.
Unlike CRTS, flat-panel displays are inherently digital. Every pixel is
individually addressed. The display requires matrix-addressing circuitry.
Unfortunately, most flat-panel monitors in the market today are connected
to the PC via the VGA video monitor port. The VGA analogue outlet socket
at the back of every PC delivers analogue colour RGB signals, which in
turn, drive a CRT. For flat-panel displays, the signals are, however,
9

B. Rajesh Kumar
reconverted into digital format through A/D conversion process. This
double conversion process degrades image quality and ads cost. A better
solution is to keep the video signal in digital format throughout.
The superior image quality of active matrix LCDs in the latest
notebook computers is due to the use of a digital link between the PC
motherboard and the display. But notebooks are closed integrated systems
where compatibility between manufacturer’s motherboard and display is not
an issue. Before the same image quality is achieved in the desktop PC, the
industry needs a digital video interface technique that permits operation in
an open system environment. By combining the digital video interface
standard with the latest generation of digital displays, system designers can
enjoy the benefits of super image quality, lower system cost, increased ease
of use, and the ability to transmit images over long distances.
LCDs:
LCD is a passive device that manipulates existing light to
produce an image, whereas active displays (CRT, plasma, and LED) emit
light. Consequently, it consumes low power and, therefore, is the preferred
choice in portable and other battery-powered applications.
Touch-screen LCD (TSLCD) modules incorporate drive
electronics and touch panel logic to display data, scan touch panel, sense
operator inputs, and output digital data to a control program. The touch-
panel portion of LCD can be programmed to display a variety of data, such
as alphanumeric, ‘QWERTY’ keyboard, icons, and other graphics. Touch
panels use capacitive or resistive sensor technology. Increased display
luminance, increased viewing angle by using better aperture ratio, new
substrates, better backlights, etc are the current trends.
PCs equipped with thin-film transistor (TFT) LCDs were the
first to be noticed. Subsequently, TFT colour LCDs helped stimulate the
widespread use of notebook computers incorporating such displays.
Advances in TFT LCD manufacturing techniques further contributed to the
spectacular spread of notebook computers. These modules continue to
develop for use as monitors for desktop computers and workstations. These
are appearing as terminal displays in banking institutions, stores, desktop
publication, and computer-aided applications.
10

B. Rajesh Kumar
The demand for LCD panels for use in cell phones is expected
to raise sharply after the launch of 3G mobile services, providing data and
full-video transmissions. Japanese electronic giants are beginning to
produce LCD panels for use in cellular phones, to cash in on their rapid
demand fueled by 3G cellular phone services. Toshiba, Sharp, Seiko Epson,
NEC, Casio Computer, etc are some of these.
Hitachi started producing colour power-saving STN (super
twisted nematic) LCD panels for cells phones and is now developing TFT
LCD panels that can display full-motion video. The global market for TFT
LCDs will continue to expand, boosted by Philips Electronics NV and LG
Electronics. The two companies formed a successful joint venture last year,
to pool their CRT activities. The venture will combine all CRT activities
and key components, as well as the glass activities and plasma technologies
of both the firms.
VFDs:
Invented in 1966, VFDs have been in the market for 34 years.
These versatile displays have gone through continuous improvements in
their technology, and are used in many devices and systems. Application
area includes automation, telecom, medical, home appliances, vending
machines, point of sale, public information systems, and calculators.
VFDs are amenable for small-size production and reused
widely as chip on-glass displays, especially for automotive applications.
Super VFD tubes consume low power and obviate the need for
backlighting. Tube structures are being improved to offer better viewing
angles. Multicolour displays use modular techniques and apply strips of
different phosphors.
FLAT DISPLAYS:
The three flat-panel displays active matrix LCDs (AMLCDs),
plasma-addressed liquid crystal (PALC) display and PDPs-can be classified
into light modulators or light emitters. AMLCD and PALC displays are
examples of the former, in which the functions of light generation and light
modulation are separated. Light modulation is accomplished via a voltage-
controlled change in the polarization of light passing through a liquid
crystal. A separate backlight provides the illumination. PDPs, light
11

B. Rajesh Kumar
generation and modulation functions are combined by mechanisms whereby
variable amounts of UV light are produced, which stimulate the phosphor to
emit visible light.
The AMLCD is a mature technology, with a large
manufacturing base and established production infrastructure.
POLYSTER PANELS:
Polyster is the likely choice for future flat-panel displays.
Researchers have developed thin-film transistor displays out of
polyethylene terephthalate thin, flexible and rugged plastic can be rolled up,
folded, or bent it practically any shape desired.
The concept holds promise for a future generation of ultra-
light, flexible, cost-effective displays. Applications include notebooks,
desktops, video-games, machines, and non-conventional displays. Roll-up
displays, displays set into clothing, paper-thin electronic books, and
newspapers are some of novel innovations.
3D DISPLAYS:
Unfortunately, 3D displays have not measured up to
expectations. In some cases, viewers must wear special glasses to have their
viewing system restricted. However, improvements are in the office, with
medical and business devices consisting glassless technologies.
Splitter system is used in amusement applications, and will
find more applications as LCD price falls and picture quality improves.
Double-image splitter system is used in business applications, binoculars,
and stereoscopic emission tests. Medical field is considering the use of 38
cm display as monitors for brain surgeries and endoscopic operations. This
display uses head-tracking technology that detects the viewer’s head and
displays optical image accordingly.
‘Stereoscopic Vision’ technology for presenting 3D images
incorporates an inversion technique called modified difference. Another
system computed-image depth, effectively converts still 2D images to 3D.
12

B. Rajesh Kumar
This system separates each subject using colour components of the screen,
and then estimates the depth of each section of images, depending on the
contrast, sharpness of each subject, and structure of the scene.
The imaging technology department at Sharp Laboratories of
Europe has developed ‘twin-LCD’ display concept. It is based on two TFT
LCDs. The images of these LCDs are superimposed by a half-mirrored
beam computer. The optical arrangement creates laterally displaced images
at the nominal observer position. Each LCD panel displays one of the stereo
pair images, enabling the observer to view the images without wearing
special glasses. Twin-LCD concept, using TFT LCDs with a controllable
illumination system, has been used to show high reality auto-stereoscopic
3D images with observer tracking over a wide angle and image look-
around.
OPTICAL FIBRES:
Optical fibre, widely known as a telecommunications
transmission medium, can be used for large displays in public places. Such
display systems consume relatively little power and deliver high contrast,
non-glare visuals in lighted settings.
As multimedia techniques progress, the market requirement of
information displayed at public locations tends to shift from communication
of data using characters to that using images. To communicate information,
the image should be large with full colours. The multi screen method is
widely used to produce a large display. A number of display units (LCDs,
CRTs, or projectors) having a certain size are assembled to form a large-
display screen. However, the drawback of these display systems is that
seams are present between the display units.
Advantages of optical fibre display systems include large
seamless screen, high design flexibility, and easy installation and
movement. These are best suited for public facilities, conference halls,
ongoing games at stadia/gymnasiums, advertisements, airports, and railway
stations.
13

B. Rajesh Kumar
DMDs:
Invented in 1987 by Texas Instruments, USA, digital micro
mirror display (DMD) is a reflective optical conversion device that features
bright projected image, with high contrast, narrow beam between pixels,
high resolution, and excellent colour reproduction. It uses digital light
processing (DLP) technology.
DMD is fabricated on CMOS SRAM, using micro machine
technology based on conventional 0.8 um wafer processing. This display
integrates electrical, mechanical, and optical functions on a single chip.
Thousands of 16 um2
Al mirrors are formed on a chip, at a chip, at a pitch of
17 um. The mirrors reflect light in one of two directions, +100
or -100
relative to the substrate surface, depending on memory outputs. DMD is
combined with a light source and projection system. When it is applied in a
DLP optical system, light enters the DMD at 200
. In ‘on’ state, the mirror
projects the light to projection lens and the pixel projected onto the screen
appears bright. In ‘off’ state, the mirror reflects lights at 400
, missing the
projection lens. The pixel then displayed is black. The system employs
binary pulse-width modulation (PWM) technology. The DMD switches the
micro-mirrors ‘on’ and ‘off’ at switching speeds of 10 us to generate bursts
of optical digital pulses that appear to the viewer as a level of brightness
between fully bright and totally dark.
DMP technology can be used in business,
consumer, or commercial applications. Business applications include front
projectors for conference room and workgroup presentations. Consumer
applications include rear-and front-projection TVs.
CONCLUSION:
The display field is vast. Newer display technologies continue
to evolve, in synchronism with modern-day convergence devices and
systems however, the general awareness and knowledge about display
systems are on a lower level, compared to the hype of related
developments in the convergence arena. In order to capitalise on
displays that match modern devices, a concerted effort is needed by the
14

B. Rajesh Kumar
diverse fields to develop effective, efficient, and economical display
systems.
REFERENCE:
ELECTRONICS FOR YOU
January 2001
15

Di splay systems

More Related Content

What's hot

Viewers also liked

Similar to Di splay systems

More from Shiva Krishna Chandra Shekar

Recently uploaded

Di splay systems