Download to read offline
dist-03-4.pdf
- 1. 1 Basic Networking Concepts 1.Introduction 2. Protocols 3. Protocol Layers 4. Network Interconnection/Internet
- 2. 2 1. Introduction -A networkcan be defined as a group of computers and other devices connected in some ways so as to be able to exchange data. -Each of the devices on the network can be thought of as a node; each node has a unique address. -Addresses are numeric quantities that are easy for computers to work with, but not for humans to remember. Example: 204.160.241.98 -Some networks also provide names that humans can more easily remember than numbers. Example: www.javasoft.com, corresponding to the above numeric address. NIC addr1 NIC addrN NIC addr2 …
- 3. 3 Addressing Internet address Consists of4 bytes separated by periods Example: 136.102.233.49 -The R first bytes (R= 1,2,3) correspond to the network address; -The remaining H bytes (H = 3,2,1) are used for the host machine. -InterNIC Register: organization in charge of the allocation of the address ranges corresponding to networks. -Criteria considered: → Geographical area (country) → Organization, enterprise → Department → Host Domain Name System (DNS) -Mnemonic textual addresses are provided to facilitate the manipulation of internet addresses. -DNS servers are responsible for translating mnemonic textual Internet addresses into hard numeric Internet addresses.
- 4. 4 Ports -An IP addressidentifies a host machine on the Internet. -An IP port will identify a specific application running on an Internet host machine. -A port is identified by a number, the port number. -The number of ports is not functionally limited, in contrast to serial communications where only 4 ports are allowed. -There are some port numbers which are dedicated for specific applications. 79 Finger 23 Telnet 110 POP3 (e-mail) 25 SMTP (e-mail) 70 Gopher 20 and 21 FTP 80 HTTP Port numbers Applications
- 5. 5 Data Transmission -In modernnetworks, data are transferred using packet switching. -Messages are broken into units called packets, and sent from one computer to the other. -At the destination, data are extracted from one or more packets and used to reconstruct the original message. -Each packet has a maximum size, and consists of a header and a data area. -The header contains the addresses of the source and destination computers and sequencing information necessary to reassemble the message at the destination. 1001….101 00010000111…000000110001100 packet header data
- 6. 6 Types of Networks Thereare two principle kinds of networks: Wide Area Networks (WANs) and Local Area Networks (LANs). WANs -Cover cities, countries, and continents. -Based on packet switching technology -Examples of WAN technology: Asynchronous Transfer Mode (ATM), Integrated Services Digital Network (ISDN) LANs -Cover buildings or a set of closely related buildings. -Examples of LAN technology: Ethernet, Token Ring, and Fibber Distributed Data Interconnect (FDDI). Ethernet LANs: based on a bus topology and broadcast communication Token ring LANs: based on ring topology FDDI LANs: use optical fibbers and an improved token ring mechanism based on two rings flowing in opposite directions.
- 7. 7 Shared bus (a) Ethernet LAN Ring (b)Token Ring LAN Dual ring (c) FDDI LAN
- 8. 8 Network connectivity typeSpeed Transmission time for 10 Mbytes (Telephone) dial-up modem 14.4 Kbps 90 min ISDN modem 56/128 Kbps 45/12min T1 connection 1.54 Mbps 50s Ethernet 10 Mbps 9s Token ring 4/16 Mbps Fast Ethernet 100 Mbps FDDI 100 Mbps Gigabit Ethernet 1 Gbps ATM 25Mbps/2.4Gbs
- 9. 9 Interconnection -Networks of lowcapacity may be connected together via a backbone network which is a network of high capacity such as a FDDI network, a WAN network etc. -LANs and WANs can be interconnected via T1 or T3 digital leased lines -According to the protocols involved, networks interconnection is achieved using one or several of the following devices: →Bridge: a computer or device that links two similar LANs based on the same protocol. → Router: a communication computer that connects different types of networks using different protocols. → B-router or Bridge/Router: a single device that combines both the functions of bridge and router. → Gateway: a network device that connects two different systems, using direct and systematic translation between protocols.
- 10. 10 Toronto branch Ethernet LANRouter Vancouver branch Token Ring LAN Gateway Frame Relay ATM T1 line NY headquaters Bridge/Route Token Ring LAN Router Bridge Bridge/Router Ethernet
- 11. 11 Network Topology Diagram Thespecification of the network topology diagram requires the definition of the characteristics and entities underlying the network: -Geographical locations of the different components or subnets involved in the network. -Description of the LAN topology -Description of the WAN topology -Description of the network connectors such as routers, bridges, repeaters, and gateways.
- 12. 12 2. Protocols -Define therules that govern the communications between two computers connected to the network. -Roles: addressing and routing of messages, error detection and recovery, sequence and flow controls etc. -A protocol specification consists of the syntax, which defines the kinds and formats of the messages exchanged, and the semantic, which specifies the action taken by each entity when specific events occur. Example: HTTP protocol for communication between web browsers and servers.
- 13. 13 S: MAIL FROM:[email protected] R: 250 OK S: RCPT TO: [email protected] R: 250 OK S: DATA R: 354 Beginning of mail; ending by <CRLF>.<CRLF> S: Blah blah blah S: …etc. S: <CRLF>.<CRLF> R: 250 OK Request For Comments (RFC): specifications of the protocols involved in Internet Communications. -Example: sample of RFC 821 describing communications between SMTP server and client.
- 14. 14 nth layer (n-1)th layer … nthlayer (n-1)th layer … Network -Protocols are designed based on a layered architecture such as the OSI reference model. -Each entity at a layer n communicates only with entities at layer n-1. -The data exchanged, known as Protocol Data Unit (PDU), goes back and forth through the layers, each layer adds or removes its own header and vice-versa. Therefore a layer n PDU may become a layer n-1 data.
- 15. 15 3. Protocol Layers TheOSI (Open Systems Interconnection) Data Model -ISO standard for computer networks design and functioning. -Involves at least 7 layers, each playing a specific role when applications are communicating over the net. -During the sending process, each layer (from top to down) will add a specific header to the raw data. -At the reception, headers are eliminated conversely until the data arrived to the receiving application.
- 16. 16 OSI Layers Physical layer (definesthe physical characteristics of the network) Data-link layer (provides safe communication of data over the physical network) Network layer (handles connection to the network by the higher layers) Transport layer (provides end-to-end errors detection and correction) Session layer (manages sessions among applications) Presentation layer (provides standard data representations for applications) Application layer (applications connected to the network)
- 17. 17 Physical layer: ensuresa safe and efficient travel of data; consists of electronic circuits for data transmission etc. Data link layer: in charge of data encapsulation under the form of packets and their interpretation at the physical layer. Network layer: in charge of packets transmission from a source A to a destination B. Transport layer: in charge of the delivery of packets from a source A to a destination B Session layer: in charge of the management of network access. Presentation layer: determines the format of the data transmitted to applications, data compressing/decompressing, encrypting etc. Application layer: contains the applications which are used by the end-user, such as Java, Word etc.
- 18. 18 The TCP/IP Model -Consistsof only 4 layers: application, transport, internet and network. Layers Application layer (applications and processes running on the network) Transport layer (provides end-to-end data delivery services) Internet layer (makes datagrams and handles data routing) Network layer (provides routines allowing access to the physical network)
- 19. 19 Network layer -Provides thesame functionality as the physical, the data link and network layers in the OSI model. -Mapping between IP addresses and network physical addresses. -Encapsulation of IP datagrams, e.g packets, in format understandable by the network. Internet layer -Lies at the heart of TCP/IP. -Based on the Internet Protocol (IP), which provides the frame for transmitting data from place A to place B. Transport layer -Based on two main protocols: TCP (Transmission Control Protocol) and UDP (User Datagram protocol) Application layer -Combines the functions of the OSI application, presentation, and session layers. -Protocols involved in this layer: HTTP, FTP, SMTP etc.
- 20. 20 4. Networks Interconnection/Internet Conceptof Network Interconnection -First implemented in the Defense Advanced Research Project Agency Network (Arpanet), in 1966 in USA. -Consists of connecting several computer networks based on different protocols -Requires the definition of a common interconnection protocol on top the local protocols. -The Internet Protocol (IP) plays this role, by defining unique addresses for a network and a host machine. FTP Telnet SNMP SMTP TCP/UDP IP Ethernet Arpanet Token ring
- 21.
- 22. 22 Internet Protocol (IP) Overview -TheIP protocol provides two main functionality: →Decomposition of the initial information flow into packets of standardized size, and reassembling at the destination. →Routing of a packet through successive networks, from the source machine to the destination identified by its IP address. -Transmitted packets are not guaranteed to be delivered (datagram protocol). -The IP protocol does not request for connection (connectionless) before sending data and does not make any error detection. Functions -Decompose the initial data (to be sent) into datagrams. -Each datagram will have a header including, the IP address and the port number of the destination. -Datagrams are then sent to selected gateways, e.g IP routers, connected at the same time to the local network and to an IP service provider network.
- 23. 23 Sender Receiver packet1 packet2 Routers -Datagrams are transferredfrom gateways to gateways until they arrived at their final destination.
- 24. 24 Structure of anIP packet -The fields at the beginning of the packet, called the frame header, define the IP protocol’s functionality and limitations. -32 bits are allocated for encoding source and destination addresses (32 bits for each of these address fields). -The remainder of the header (16 bits) encodes various information such as the total packet length in bytes. -Hence an IP packet can be a maximum of 64Kb long. 0 10 12 16 20 24 Header Checksum Source address Destination address Options Data
- 25. 25 Transmission Control Protocol(TCP) Overview -TCP provides by using IP packets a basic service that does guarantee safe delivery: →error detection →safe data transmission →assurance that data are received in the correct order -Before sending data, TCP requires that the computers communicating establish a connection (connection-oriented protocol). Client Server TCP SYN SYN_ACK ACK DATA DATA ACK DATA FIN FIN ACK
- 26. 26 -TCP provides supportfor sending and receiving arbitrary amounts of data as one big stream of byte data (IP is limited to 64Kb). -TCP does so by breaking up the data stream into separate IP packets. -Packets are numbered, and reassembled on arrival, using sequence and sequence acknowledge numbers. -TCP also improves the capability of IP by specifying port numbers. → There are 65,536 different TCP ports (sockets) through which every TCP/IP machine can talk. Structure of a TCP packet 0 2 4 8 12 20 Source port Destination port Sequence No. Sequence Ack. No. Misc. header Data
- 27. 27 User Datagram Protocol(UDP) Overview -Datagram protocol also built on top of IP. -Has the same packet-size limit (64Kb) as IP, but allows for port number specification. -Provides also 65,536 different ports. -Hence, every machine has two sets of 65,536 ports: one for TCP and the other for UDP. -Connectionless protocol, without any error detection facility. -Provides only support for data transmission from one end to the other, without any further verification. -The main interest of UDP is that since it does not make further verification, it is very fast. -Useful for sending small size data in a repetitive way such as time information.
- 28. 28 4.5 Internet ApplicationProtocols On top of TCP/IP, several services have been developed in order to homogenize applications of same nature: -FTP (File Transfer Protocol) allows the transfer of collection of files between two machines connected to the Internet. -Telnet (Terminal Protocol) allows a user to connect to a remote host in terminal mode. -NNTP (Network News Transfer Protocol) allows the constitution of communication groups (newsgroups) organized around specific topics. -SMTP (Simple Mail Transfer Protocol) defines a basic service for electronic mails. -SNMP (Simple Network Management Protocol) allows the management of the network. FTP Telnet SNMP SMTP TCP/UDP IP Ethernet Arpanet Token ring