Downloaded 125 times
Uploaded byvishal gupta
Fiber optic communication
Optical fiber uses pulses of light to transmit information over long distances and has largely replaced copper wire for telecommunications. It works by total internal reflection of light through fiber optic cables containing glass or plastic fibers. Optical fiber transmits digital signals for telephone calls, internet, and cable TV using semiconductor devices like lasers and photodetectors. Fiber optic communication has revolutionized telecommunications by enabling much higher bandwidth transmission over greater distances than electrical wires.
More Related Content
Similar to Fiber optic communication
Fiber optic communication
- 2. communication is amethod of transmitting information from one place to another by send Optical fiber is used by many telecommunications companies to transmit telephone signals, Internet communication, and cable television signals. ing pulses of light through an optical fiber.
- 3. First developed inthe 1970s, fiber-optics have revolutionized the telecommunications industry and have played a major role in the advent of the Information Age. Because of its advantages over electrical transmission, optical fibers have largely replaced copper wire communications in core networks in the developed world.
- 5. Optical fiber isused by many telecommunications companies to transmit telephone signals, Internet communication, and cable television signals. Due to much lower attenuation and interference, optical fiber has large advantages over existing copper wire in long-distance and high-demand applications. However, infrastructure development within cities was relatively difficult and time- consuming, and fiber-optic systems were complex and expensive to install and operate.
- 10. In 1880 AlexanderGraham Bell and his assistant Charles Sumner Tainted created a very early precursor to fiber-optic communications, the Photo phone, at Bell's newly established Volta Laboratory in Washington, D.C. Bell considered it his most important invention. The device allowed for the transmission of sound on a beam of light.
- 11. Modern fiber-optic communicationsystems generally include an optical transmitter to convert an electrical signal into an optical signal to send into the optical fiber, a cable containing bundles of multiple optical fibers that is routed through underground conduits and buildings, multiple kinds of amplifiers, and an optical receiver to recover the signal as an electrical signal. The information transmitted is typically digital information generated by computers, telephone systems, and cable television companies.
- 12. The most commonlyused optical transmitters are semiconductor devices such as light-emitting diodes (LEDs) and laser diodes. The difference between LEDs and laser diodes is that LEDs produce incoherent light, while laser diodes produce coherent light.
- 13. The main componentof an optical receiver is a photo detector, which converts light into electricity using the photoelectric effect. The primary photo detectors for telecommunications are made from Indium gallium arsenide The photo detector is typically a semiconductor-based photodiode. Several types of photodiodes include p-n photodiodes, p-i-n photodiodes, and avalanche photodiodes. Metal- semiconductor-metal (MSM) photo detectors are also used due to their suitability for circuit integration in regenerators and wavelength-division multiplexers.
- 14. Main articles: Opticalfiber and Optical fiber cable An optical fiber cable consists of a core, cladding, and a buffer (a protective outer coating), in which the cladding guides the light along the core by using the method of total internal reflection.
- 15. The transmission distanceof a fiber-optic communication system has traditionally been limited by fiber attenuation and by fiber distortion. By using onto-electronic repeaters, these problems have been eliminated. These repeaters convert the signal into an electrical signal, and then use a transmitter to send the signal again at a higher intensity than was received, thus counteracting the loss incurred in the previous segment. Because of the high complexity with modern wavelength-division multiplexed signals (including the fact that they had to be installed about once every 20 km), the cost of these repeaters is very high.
- 16. Each fiber cancarry many independent channels, each using a different wavelength of light (wavelength-division multiplexing). The net data rate (data rate without overhead bytes) per fiber is the per-channel data rate reduced by the FEC overhead, multiplied by the number of channels (usually up to eighty in commercial dense WDMsystems as of 2008).
- 17. For modern glassoptical fiber, the maximum transmission distance is limited not by direct material absorption but by several types of dispersion, or spreading of optical pulses as they travel along the fiber. Dispersion in optical fibers is caused by a variety of factors. Intermodal dispersion, caused by the different axial speeds of different transverse modes, limits the performance of multi-mode fiber.
- 18. Fiber attenuation, whichnecessitates the use of amplification systems, is caused by a combination of material absorption, Rayleigh scattering, Mie scattering, and connection losses. Although material absorption for pure silica is only around 0.03 dB/km (modern fiber has attenuation around 0.3 dB/km), impurities in the original optical fibers caused attenuation of about 1000 dB/km
- 19. Each effect thatcontributes to attenuation and dispersion depends on the optical wavelength. There are wavelength bands (or windows) where these effects are weakest, and these are the most favorable for transmission. These windows have been standardized, and the currently defined bands are the flowing.
- 20. When a communicationslink must span a larger distance than existing fiber-optic technology is capable of, the signal must be regenerated at intermediate points in the link by optical communications repeaters. Repeaters add substantial cost to a communication system, and so system designers attempt to minimize their use.
- 21. Although fiber-optic systemsexcel in high- bandwidth applications, optical fiber has been slow to achieve its goal of fiber to the premises or to solve the last mile problem. However, as bandwidth demand increases, more and more progress towards this goal can be observed. In Japan, for instance EPON has largely replaced DSL as a broadband Internet source. South Korea’s KT also provides a service called FTTH (Fiber To The Home), which provides fiber-optic connections to the subscriber’s home.
- 22. The choice betweenoptical fiber and electrical (or copper) transmission for a particular system is made based on a number of trade-offs. Optical fiber is generally chosen for systems requiring higher bandwidth or spanning longer distances than electrical cabling can accommodate.