More Related Content
Similar to Good storage practices
Good storage practices
- 1. GOOD STORAGE PRACTICESFOR PHARMACEUTICALS
- 2. GOOD STORAGE PRACTICES Goodstorage practices (GSP) are that part of quality assurance that ensures that the quality of pharmaceutical products is maintained by means of adequate control throughout the storage thereof…
- 3. GOOD STORAGE PRACTICES PERSONNEL.. At each storage site there should be an adequate number of personnel to achieve pharmaceutical quality assurance objectives. All personnel should receive proper training in relation to good storage practice, regulations, procedures and safety. All staff should be trained in, and observe high levels of, personal hygiene and sanitation. Personnel employed in storage areas should wear suitable protective or working garments appropriate for the activities they perform.
- 4. GOOD STORAGE PRACTICES STORAGEAREAS.. Precautions must be taken to prevent unauthorized persons from entering storage areas. Storage areas should be of sufficient capacity to allow the orderly storage of the various categories of materials and products, namely starting and packaging materials, intermediates, bulk and finished products, products in quarantine, and released, rejected, returned or recalled products.
- 5. GOOD STORAGE PRACTICES STORAGEAREAS.. Storage areas should be designed or adapted to ensure good storage conditions. In particular, they should be clean and dry and maintained within acceptable temperature limits. Where special storage conditions are required on the label (e.g. temperature, relative humidity), these should be provided, checked, monitored and recorded. Materials and pharmaceutical products should be stored off the floor and suitably spaced to permit cleaning and inspection.
- 6. GOOD STORAGE PRACTICES STORAGEAREAS.. Storage areas should be clean, and free from accumulated waste and vermin. A written sanitation programme should be available indicating the frequency of cleaning and the methods to be used to clean the premises and storage areas. There should also be a written programme for pest control. The pest-control agents used should be safe, and there should be no risk of contamination of the materials and pharmaceutical products. There should be appropriate procedures for the clean up of any spillage to ensure complete removal of any risk of contamination.
- 7. GOOD STORAGE PRACTICES STORAGEAREAS.. Storage areas Receiving and dispatch bays should protect materials and products from the weather. Receipt areas should be designed and equipped to allow containers of incoming materials and pharmaceutical products to be cleaned, if necessary, before storage. Where quarantine status is ensured by storage in separate areas, these areas must be clearly marked and their access restricted to authorized personnel. Any system replacing physical quarantine should provide equivalent security. For example, computerized systems can be used, provided that they are validated to demonstrate security of access.
- 8. GOOD STORAGE PRACTICES STORAGEAREAS.. There should normally be a separate sampling area for starting materials in a controlled environment. If sampling is performed in the storage area, it should be conducted in such a way as to prevent contamination or cross-contamination. Adequate cleaning procedures should be in place for the sampling areas. Physical or other equivalent validated (e.g. electronic) segregation should be provided for the storage of rejected, expired, recalled or returned materials or products. The materials or products, and areas concerned should be appropriately identified.
- 9. GOOD STORAGE PRACTICES STORAGEAREAS.. Highly active and radioactive materials, narcotics and other hazardous, sensitive and/or dangerous materials and pharmaceutical products, as well as substances presenting special risks of abuse, fire or explosion, (e.g. combustible liquids and solids and pressurized gases) should be stored in a dedicated area that is subject to appropriate additional safety and security measures. Materials and pharmaceutical products should be handled and stored in such a manner as to prevent contamination, mix-ups and cross-contamination.
- 10. GOOD STORAGE PRACTICES STORAGEAREAS.. Materials and pharmaceutical products should be stored in conditions which assure that their quality is maintained, and stock should be appropriately rotated. The “first expired/first out” (FEFO) principle should be followed. Rejected materials and pharmaceutical products should be identified and controlled under a quarantine system designed to prevent their use until a final decision is taken. Storage areas should provide adequate lighting to enable all operations to be carried out accurately and safely.
- 11. GOOD STORAGE PRACTICES MONITORINGOF STORAGE CONDITIONS.. Recorded temperature monitoring data should be available for review. The equipment used for monitoring should be checked at suitable predetermined intervals and the results of such checks should be recorded and retained. Temperature mapping should show uniformity of the temperature across the storage facility. It is recommended that temperature monitors be located in areas that are most likely to show fluctuations.
- 12. GOOD STORAGE PRACTICES STORAGEREQUIREMENTS.. Comprehensive records should be maintained showing all receipts and issues of materials and pharmaceutical products according to a specified system, e.g. by batch number.
- 13. GOOD STORAGE PRACTICES LABELLINGAND CONTAINERS.. All containers should be clearly labelled with at least the name of the material, the batch number, the expiry date or retest date, the specified storage conditions and reference to the pharmacopoeia, where applicable. Unauthorized abbreviations, names or codes should not be used.
- 14. GOOD STORAGE PRACTICES RECEIPTOF INCOMING MATERIALS AND PHARMACEUTICAL PRODUCTS.. On receipt, each incoming delivery should be checked against the relevant purchase order and each container physically verified, e.g. by the label description, batch number, type of material or pharmaceutical product and quantity. Each container should be carefully inspected for possible contamination, tampering and damage, and any suspect containers or, if necessary, the entire delivery should be quarantined for further investigation.
- 15. GOOD STORAGE PRACTICES RECEIPTOF INCOMING MATERIALS AND PHARMACEUTICAL PRODUCTS.. When required, samples should be taken only by appropriately trained and qualified personnel and in strict accordance with written sampling instructions. Containers from which samples have been taken should be labelled accordingly. Following sampling, the goods should be subject to quarantine. Batch segregation should be maintained during quarantine and all subsequent storage.
- 16. GOOD STORAGE PRACTICES RECEIPTOF INCOMING MATERIALS AND PHARMACEUTICAL PRODUCTS.. Materials and pharmaceutical products should remain in quarantine until an authorized release or rejection is obtained. Measures should be taken to ensure that rejected materials and pharmaceutical products cannot be used. They should be stored separately from other materials and pharmaceutical products while awaiting destruction or return to the supplier.
- 17. GOOD STORAGE PRACTICES STOCKROTATION AND CONTROL.. Periodic stock reconciliation should be performed by comparing the actual and recorded stocks. All significant stock discrepancies should be investigated as a check against inadvertent mix-ups and/or incorrect issue.
- 18. GOOD STORAGE PRACTICES STOCKROTATION AND CONTROL.. In manufacturing facilities, partly used containers of materials and pharmaceutical products should be securely reclosed and resealed to prevent spoilage and/or contamination during subsequent storage. Materials and pharmaceutical products from containers which have been opened or partly used should be used up before those in unopened containers. Damaged containers should not be issued unless the quality of the material has been shown to be unaffected. Where possible, this should be brought to the attention of the person responsible for quality control. Any action taken should be documented.
- 19. GOOD STORAGE PRACTICES CONTROLOF OBSOLETE AND OUTDATED MATERIALS AND PHARMACEUTICAL PRODUCTS.. All stocks should be checked regularly for obsolete and outdated materials and pharmaceutical products. All due precautions should be observed to prevent the issue of outdated materials and pharmaceutical products.
- 20. GOOD STORAGE PRACTICES RETURNEDGOODS.. Returned goods, including recalled goods, should be handled in accordance with approved procedures and records should be maintained. All returned goods should be placed in quarantine and returned to saleable stock only after this has been approved by a nominated, responsible person following a satisfactory quality re-evaluation.
- 21. GOOD STORAGE PRACTICES DISPATCHAND TRANSPORT.. Materials and pharmaceutical products should be transported in such a way that their integrity is not impaired and that storage conditions are maintained. Special care should be exercised when using dry ice in cold chains. In addition observing to safety precautions, it must be ensured that the materials or product does not come in into contact with dry ice, as this may adversely affect the product quality, e.g. by freezing.
- 22. GOOD STORAGE PRACTICES DISPATCHAND TRANSPORT.. Where appropriate, the use of devices to monitor conditions such as temperature during transportation is recommended. Monitoring records should be available for review. Dispatch procedures should be established and documented, taking into account the nature of the materials and pharmaceutical products concerned and any special precautions that might be required.
- 23. GOOD STORAGE PRACTICES DISPATCHAND TRANSPORT.. The outside container should offer adequate protection from all external influences and should be indelibly and clearly labelled. Records for dispatch should be retained, stating at least: — the date of dispatch; — the customer’s name and address; — the product description, e.g. name, dosage form and strength (if appropriate), batch number and quantify; — the transport and storage conditions. All records should be readily accessible and available on request.
- 24. GOOD STORAGE PRACTICES REFERENCES: 1. Good trade and distribution practice (GTDP) of pharmaceutical starting materials. Geneva, World Health Organization, 2002 (unpublished document QAS/01.014; available on request from Essential Drugs and Medicines Policy, World Health Organization, 1211 Geneva 27, Switzerland). 2. WHO Expert Committee on Specifications for Pharmaceutical Preparations. Thirty-fourth report. Geneva, World Health Organization, 1996 (WHO Technical Report Series, No. 863). 3. Good manufacturing practices for pharmaceutical products. In: Quality assurance of pharmaceuticals. A compendium of guidelines and related materials. Volume 2. Good manufacturing practices and inspection. Geneva, World Health Organization, 1999; WHO Expert Committee on Specifications for Pharmaceutical Preparations. Thirty-Fifth report. Geneva, World Health Organization, 1999 (WHO Technical Report Series, No. 885); WHO Expert Committee on Specifications for Pharmaceutical Preparations. Thirty-Sixth report. Geneva, World Health Organization, 2002 (WHO Technical ReportSeries, No. 902) 4. The international pharmacopoeia, 3rd ed. Vol. 1: General methods of analysis; Vol. 2: Quality specifications; Vol. 3: Quality specifications; Vol. 4:Tests, methods, and general requirements. Quality specifications for pharmaceutical substances, excipients, and dosage forms; Volume 5: Test and general requirements for dosage forms. Quality specifications for pharmaceutical substances and tablets (in press). Geneva, World Health Organization, 1979–2002.
- 25. If you wouldlike to donate us? Scan below and donate us 0.013$ (US dollar) (5Rs Indian rupee) Contact: If you want PPT/PDF files, please contact below. Email: [email protected] Telegram:+919738137533(only for Chat)