GROUP 5
MEMBERS
1.COLLINS NGENO
2.SHADRACK LONGOCHO
3.KELVIN KIMEU
4.PETER CHERUIYOT
5.DOMINIC MUEMA
MICROTOMY
It is the science or practice of preparing extremely thin slices of
tissue cut by a microtome for study under the microscope
Or
Microtomy is the means by which tissues can be
sectioned and attached to the surface so that
examination by microscopy can take place.
The basic instrument used in
microtomy is a microtome into which cutting tool is
clamped.
Microtome is the instrument which is used to cut
thin section of tissue.
Microtome are machines that will advance
an object for a predetermined distance then slide the
object to the cutting tool.
TYPES OF MICROTOME
There are several types of microtome each designed for a
specific purpose although many have a functional role.
Excluding ultra microtome ,there are 5 basic types.
named according to the mechanism.
ď‚— Rotary microtome
ď‚— Rocking microtome
ď‚— Rotary rocking microtome
ď‚— Base sledge microtome
ď‚— Sliding microtome
ď‚— Freezing microtome
ROTARY MICROTOME
Parts:
•Block holder
•Knife clamps screws
•Knife clamps
•Block adjustment
•Thickness gauge
•Angle of tilt adjustment
•Operating handle
•Internal and external lock
• This is the most commonly used microtome for
routines and research purpose.
The rotary microtome is so called because of the
rotary action of the hand wheel actuates.
These machines sometimes called muinor
microtome after their inventor prof. Minot.
ď‚— The rotary microtome is so called because of the
rotary action of the hand wheel actuates.
ď‚— These machines sometimes called minor microtome
after their inventor prof. Minot.
ď‚— This is the most commonly used microtome for
routines and research purpose.
ď‚— Here the knife is fixed & the tissue blocks moves up &
down vertically in front of the knife.
ď‚— Plane wedge knife is used.
ď‚— Thickness is adjusted by micrometer screws.
ď‚— The block moves forward to the knife at presented
thickness during the rotation of fly –wheel handle.
ď‚— It has adjusting screws to make the tissue block
parallel to the knife.
ADVANTAGES
ď‚— It is heavier than rocking microtome.
ď‚— No vibration while cutting.
ď‚— It can be used for cutting hard tissues.
ď‚— The cutting angle of the knife is adjustable.
ď‚— The knife holder is movable.
ď‚— The ability to cope with very hard tissues , together
with cutting good accurate section at 3mm gives the
flexibility that is now required.
ď‚— Electrically driven microtome can be used when the
necessary to produce ribbons for serial reactions
required.
ď‚— This microtome are employed to their best advantage
with resign embedded tissues.
ď‚— Manual or electrically driven rotary microtome are
successfully used in cryostats.
ROCKING MICROTOME
•It is the oldest type of microtome.
•The name comes under the rocking action of the
handle.
•The Cambridge rocking microtome was the most
popular microtome.
•In this microtome knife is fixed &the block of the tissue
moves through an arc to strike knife.
DISADVANTAGES
ď‚— The size of the block that can be cut is limited.
ď‚— It is a lighter microtome , so it vibrates white
cutting.
ď‚— The cutting angle of the knife cannot be adjusted.
ď‚— The sections cut curved when the block moves
through an arc.
ď‚— No serial section is possible.
ROTORY ROCKING MICROTOME
ď‚— This is slightly more robust than the rocking
microtome &has the advantage of producing a
flat face to the tissue block.
ď‚— Although they can be used for paraffin wax
work, they are used more commonly in cryostat.
ď‚— Most of them have retroactive mechanism which
takes the tissue block away from the knife on the
upward stroke.
SLEDGE MICROTOME
PARTS:
ď‚— Knife clamps
ď‚— Block holder
ď‚— Course adjustment
ď‚— Angular lift adjustment
ď‚— Operating handle
ď‚— Thickness gauge
ď‚— Adjustment rocking nut
ď‚— Block adjustment screw
ď‚— Split nut clamp
ď‚— It is used to cut large paraffin block tissues like
eye ball ,lungs brain and also for cutting hard
tissue
ď‚— It is a heavy microtome hence so stable
ď‚— Knife using is a plain wedge or Plano concave
ď‚— Here the block is faced towards knife at
predetermined thickness
ď‚— It is also used for cutting colloid embedded
section or block
ď‚— Freezing stage is available on this machine
SLIDING MICROTOME
ď‚— In this type the knife is mode horizontally
against a fixed block.
ď‚— It is mainly used for cutting celloidin embedded
block & it is also used in paraffin backs
embedding block.
ULTRA MICROTOME
Used almost exclusively for electron microscopy
FREEZING MICROTOME
Although other microtome can be modify for
cutting frozen section, this type will give the
best results & is used almost universally.
VIBRATING MICROTOME
This instrument has been designed to cut
tissues which has not been fixed , processed
or frozen.
ADVANTAGES
ď‚— Greatest application in enzyme histochemistry &
ultra structure histochemistry.
ď‚— Tissues are cut at very slow speed to avoid
disintegration.
KNIVES
FAULTS
ď‚— There are times when proper section cannot be
cut. Main reasons are either:
ď‚— 1. Faults occurring during section cutting or
ď‚— 2. Faults due to poor processing.
ď‚— Below are given the various defects, reasons for
the defect and the remedy for the same.
THANK YOU

GROUP 5.pptx

  • 1.
    GROUP 5 MEMBERS 1.COLLINS NGENO 2.SHADRACKLONGOCHO 3.KELVIN KIMEU 4.PETER CHERUIYOT 5.DOMINIC MUEMA
  • 2.
    MICROTOMY It is thescience or practice of preparing extremely thin slices of tissue cut by a microtome for study under the microscope
  • 3.
    Or Microtomy is themeans by which tissues can be sectioned and attached to the surface so that examination by microscopy can take place. The basic instrument used in microtomy is a microtome into which cutting tool is clamped. Microtome is the instrument which is used to cut thin section of tissue. Microtome are machines that will advance an object for a predetermined distance then slide the object to the cutting tool.
  • 4.
    TYPES OF MICROTOME Thereare several types of microtome each designed for a specific purpose although many have a functional role. Excluding ultra microtome ,there are 5 basic types. named according to the mechanism. ď‚— Rotary microtome ď‚— Rocking microtome ď‚— Rotary rocking microtome ď‚— Base sledge microtome ď‚— Sliding microtome ď‚— Freezing microtome
  • 5.
    ROTARY MICROTOME Parts: •Block holder •Knifeclamps screws •Knife clamps •Block adjustment •Thickness gauge •Angle of tilt adjustment •Operating handle •Internal and external lock
  • 7.
    • This isthe most commonly used microtome for routines and research purpose. The rotary microtome is so called because of the rotary action of the hand wheel actuates. These machines sometimes called muinor microtome after their inventor prof. Minot.
  • 8.
     The rotarymicrotome is so called because of the rotary action of the hand wheel actuates.  These machines sometimes called minor microtome after their inventor prof. Minot.  This is the most commonly used microtome for routines and research purpose.  Here the knife is fixed & the tissue blocks moves up & down vertically in front of the knife.  Plane wedge knife is used.  Thickness is adjusted by micrometer screws.  The block moves forward to the knife at presented thickness during the rotation of fly –wheel handle.  It has adjusting screws to make the tissue block parallel to the knife.
  • 9.
    ADVANTAGES ď‚— It isheavier than rocking microtome. ď‚— No vibration while cutting. ď‚— It can be used for cutting hard tissues. ď‚— The cutting angle of the knife is adjustable. ď‚— The knife holder is movable. ď‚— The ability to cope with very hard tissues , together with cutting good accurate section at 3mm gives the flexibility that is now required. ď‚— Electrically driven microtome can be used when the necessary to produce ribbons for serial reactions required. ď‚— This microtome are employed to their best advantage with resign embedded tissues. ď‚— Manual or electrically driven rotary microtome are successfully used in cryostats.
  • 10.
    ROCKING MICROTOME •It isthe oldest type of microtome. •The name comes under the rocking action of the handle. •The Cambridge rocking microtome was the most popular microtome. •In this microtome knife is fixed &the block of the tissue moves through an arc to strike knife.
  • 12.
    DISADVANTAGES ď‚— The sizeof the block that can be cut is limited. ď‚— It is a lighter microtome , so it vibrates white cutting. ď‚— The cutting angle of the knife cannot be adjusted. ď‚— The sections cut curved when the block moves through an arc. ď‚— No serial section is possible.
  • 13.
    ROTORY ROCKING MICROTOME ď‚—This is slightly more robust than the rocking microtome &has the advantage of producing a flat face to the tissue block. ď‚— Although they can be used for paraffin wax work, they are used more commonly in cryostat. ď‚— Most of them have retroactive mechanism which takes the tissue block away from the knife on the upward stroke.
  • 14.
    SLEDGE MICROTOME PARTS: ď‚— Knifeclamps ď‚— Block holder ď‚— Course adjustment ď‚— Angular lift adjustment ď‚— Operating handle ď‚— Thickness gauge ď‚— Adjustment rocking nut ď‚— Block adjustment screw ď‚— Split nut clamp
  • 15.
    ď‚— It isused to cut large paraffin block tissues like eye ball ,lungs brain and also for cutting hard tissue ď‚— It is a heavy microtome hence so stable ď‚— Knife using is a plain wedge or Plano concave ď‚— Here the block is faced towards knife at predetermined thickness ď‚— It is also used for cutting colloid embedded section or block ď‚— Freezing stage is available on this machine
  • 16.
    SLIDING MICROTOME ď‚— Inthis type the knife is mode horizontally against a fixed block. ď‚— It is mainly used for cutting celloidin embedded block & it is also used in paraffin backs embedding block.
  • 19.
    ULTRA MICROTOME Used almostexclusively for electron microscopy
  • 21.
    FREEZING MICROTOME Although othermicrotome can be modify for cutting frozen section, this type will give the best results & is used almost universally.
  • 23.
    VIBRATING MICROTOME This instrumenthas been designed to cut tissues which has not been fixed , processed or frozen.
  • 25.
    ADVANTAGES ď‚— Greatest applicationin enzyme histochemistry & ultra structure histochemistry. ď‚— Tissues are cut at very slow speed to avoid disintegration.
  • 26.
  • 31.
    FAULTS ď‚— There aretimes when proper section cannot be cut. Main reasons are either: ď‚— 1. Faults occurring during section cutting or ď‚— 2. Faults due to poor processing. ď‚— Below are given the various defects, reasons for the defect and the remedy for the same.
  • 43.