Download to read offline
Grx3000
- 1. ® GRAFIK Eye 3000 Series Preset Dimming Controls 3000-1 06.11.04 GRAFIK Eye 3000 Series Control Unit Cover (shown open) Description • Provides pushbutton recall of four preset lighting scenes, plus Off. • Allows setup of lighting scenes using buttons on the Control Unit. • Controls many light source types directly, and others using power interfaces. • Provides lockout options to prevent accidental changes. • Includes built-in infrared receiver for operation with an optional remote control. Models available to: • Accept 120V, 220-240V (non-CE), 230V (CE) and 100V input power. • Control two to six zones of lighting. Base Zone Infrared Receiver GRX-3100 Control Units Scene Selection Provide setup using buttons on the Control Buttons Unit. GRX-3500 Control Units Provide optional setup using a PC, including setting lighting levels in 1% increments. R S P E C I F I C AT I O N S U B M I T TA L Page 1 Job Name: Model Numbers: Job Number:
- 2. ® GRAFIK Eye 3000 Series Preset Dimming Controls 3000-4 06.11.04 Specifications Input Power Key Design Features • 120V, 220-240V (non-CE), 230V (CE) or 100V, • Meets IEC 801-2. Tested to withstand 15kV 50/60Hz. electrostatic discharge without damage or • Lightning Strike Protection: Meets ANSI/IEEE memory loss. standard 62.41-1980. Can withstand voltage surges • Compensates in real time for incoming line voltage of up to 6000V and current surges of up to 3000A. variations: No visible flicker with +/-2% change in RMS voltage/cycle and +/-2% Hz change in Lighting Sources/Load Types frequency/second. Controls the following lighting sources with a • 10-year power failure memory automatically smooth, continuous Square Law dimming curve or restores lighting to levels prior to power interruption. on a full conduction non-dim basis: • Faceplate snaps on with no visible means of • Incandescent, Tungsten, Magnetic Low Voltage attachment. Transformer • Lutron Tu-Wire® Electronic Fluorescent Dimming System Communications and Capacities Ballast • Low-voltage type Class 2 (PELV) wiring connects • Neon and Cold Cathode Control Units, Wallstations, and Control Interfaces: Controls the following lighting sources with a smooth • Up to 8 Control Units may be linked to control up continuous Square Law dimming curve through to 48 zones. separate power interfaces: • Up to 16 total Wallstations and Control Interfaces • Electronic Low Voltage Transformer may be added for a total of 24 control points. • Lutron Electronic Fluorescent Dimming Ballast Environment Preset Control • 32-104°F (0-40°C). Relative humidity less than • 4 preset lighting scenes and off are accessible from 90% non-condensing. the Control Unit front panel. • 12 additional scenes are stored in the Control Unit. These scenes are accessible via Wallstations and/or Control Interfaces. • Light levels fade smoothly between scenes. Fade time can be set differently for each scene, between 0-59 sec. or 1-60 min. Fade time from Off is capped at 5 sec. R S P E C I F I C AT I O N S U B M I T TA L Page 2 Job Name: Model Numbers: Job Number:
- 3. ® GRAFIK Eye 3000 Series Preset Dimming Controls 3000-7 06.11.04 How to Build a Model Number GRX-3506-T-AU-WH Cover Options Color Options Opaque A Architectural Matte Finishes Prefix Cover and Base will match. Standard – Ship in 48 hours Translucent Black T Cover Option: A or T Set-Up White WH Method Color Black Cover and choice of base color. Ivory IV Option Beige BE Number Input Gray GR of Zones Voltage Also available: Brown BR Cover - Custom controls Black BL - Color matching Designer Gloss Finishes Option - Engraving Ship in 4 to 6 weeks These options ship in 4 to 6 Cover Option: A only Prefix: weeks White GWH Light Almond GLA GRX for Grafik Eye 3000 Series Almond GAL Control Units Ivory GIV Set-Up Method: Satin Color Matte Finishes Cover Option: A or T 1 for standard via front panel Hot HT 5 for PC setup Ochre OC Terracotta TC Number of Zones: Desert Stone DS 2, 3, 4, or 6 Stone ST Limestone LS Cover Option: Blue Mist BT A for Opaque Midnight MN Taupe TP T for Translucent Black Biscuit BI Input Voltage Eggshell ES Snow SW __ (no code) for 120V Single Feed Architectural Metal Finishes AU for 220-240V (non-CE) Cover Option: T only CE for 230V (CE) Bright Brass BB JA for 100V Bright Chrome BC Satin Brass SB Color Option: Satin Chrome SC See Color Options list Satin Nickel SN Antique Brass QB Antique Bronze QZ Bright Nickel BN Anodized Aluminum Finishes Cover Option: T only Clear CLA Black BLA Brass BRA Bronze BZA R S P E C I F I C AT I O N S U B M I T TA L Page 3 Job Name: Model Numbers: Job Number:
- 4. ® GRAFIK Eye 3000 Series Preset Dimming Controls 3000-9 06.11.04 Model Numbers 120V Input Power Number Standard Setup PC Setup Unit Capacity Zone Capacity of Zones (Watts/VA) (Watts/VA) 2 GRX-3102-_-__ GRX-3502-_-__ 1200 800 3 GRX-3103-_-__ GRX-3503-_-__ 1500 800 4 GRX-3104-_-__ GRX-3504-_-__ 2000 800 6 GRX-3106-_-__ GRX-3506-_-__ 2000 800 220–240V (non-CE) Input Power Number Standard Setup PC Setup Unit Capacity Zone Capacity of Zones (Watts/VA) (Watts/VA) 2 GRX-3102-_-AU-__ GRX-3502-_-AU-__ 1600 1200 3 GRX-3103-_-AU-__ GRX-3503-_-AU-__ 2400 1200 4 GRX-3104-_-AU-__ GRX-3504-_-AU-__ 3000 1200 6 GRX-3106-_-AU-__ GRX-3506-_-AU-__ 3000 1200 230V (CE) Input Power Number Standard Setup PC Setup Unit Capacity Zone Capacity of Zones (Watts/VA) (Watts/VA) 2 GRX-3102-_-CE-__ GRX-3502-_-CE-__ 1600 800 3 GRX-3103-_-CE-__ GRX-3503-_-CE-__ 2300 800 4 GRX-3104-_-CE-__ GRX-3504-_-CE-__ 2300 800 6 GRX-3106-_-CE-__ GRX-3506-_-CE-__ 2300 800 100V Input Power Number Standard Setup PC Setup Unit Capacity Zone Capacity of Zones (Watts/VA) (Watts/VA) 2 GRX-3102-_-JA-__ GRX-3502-_-JA-__ 1000 600 3 GRX-3103-_-JA-__ GRX-3503-_-JA-__ 1250 600 4 GRX-3104-_-JA-__ GRX-3504-_-JA-__ 1600 600 6 GRX-3106-_-JA-__ GRX-3506-_-JA-__ 1600 600 R S P E C I F I C AT I O N S U B M I T TA L Page 4 Job Name: Model Numbers: Job Number:
- 5. ® GRAFIK Eye 3000 Series Preset Dimming Controls 3000-11 06.11.04 Dimensions and Mounting - All Voltages Except 230V (CE) Wallbox1 Model Side View A B C Depth U.S. Size 2-Zone: ZONE 4ZONE 1 ZONE 5 ZONE 6 FADE M S TEMPORARY ZONES F 4 5/16" 1 13/16” 5.56” 2 Gang 3.5” GRX-3102 MASTER 5/16" 1 15/16" (123mm) (46mm) (141mm) (89mm) GRX-3502 (8 mm) (49 mm) 3-Zone: ZONE 4 ZONE 1 ZONE 5 ZONE 6 FADE M S TEMPORARY ZONES F 6 11/16” 3 5/8” 7.25” 3 Gang 3.5” GRX-3103 (89mm) MASTER (168mm) (92mm) (184mm) GRX-3503 4-Zone: ZONE 1 ZONE 2 ZONE 3 ZONE 4 ZONE 5 ZONE 6 FADE TEMPORARY F 8 5/16” 5 7/16” 8.94” 4 Gang 3.5” M S ZONES 4 9/16" GRX-3104 (208mm) (138mm) (227mm) (89mm) MASTER (116 mm) GRX-3504 6-Zone: ZONE 1 ZONE 2 ZONE 3 ZONE 4 ZONE 5 ZONE 6 FADE M S TEMPORARY ZONES F 8 5/16” 5 7/16” 8.94” 4 Gang 3.5” GRX-3106 MASTER (208mm) (138mm) (227) (89mm) GRX-3506 3 1/2" (89mm) wallbox depth recommended A B 3 5/16" (85mm) C 1 Can be ordered from Lutron. R S P E C I F I C AT I O N S U B M I T TA L Page 5 Job Name: Model Numbers: Job Number:
- 6. ® GRAFIK Eye 3000 Series Preset Dimming Controls 3000-13 06.11.04 Line Voltage Wiring - 120V, 100V, 220-240V Models • Pull power wiring from distribution panel and to light fixtures. • Each line voltage terminal can accept up to two #12 AWG (2.5mm2) wires. Earth/Ground from Distribution Panel (2) #12 AWG (2) #12 AWG Distribution Panel (2.5 mm2) (2.5 mm2) Load 2 ZONE 2 ZONE 1 Load 1 Load 4 ZONE 4 ZONE 3 Load 3 CU WIRE ONLY Load 6 ZONE 6 ZONE 5 Load 5 Hot/Live CLASS 2 USA Hot/Live 1 2 3 4 Class 2 Neutral HOT/LIVE IEC PELV SSA NEUTRAL (2) #12 AWG Rear View of GRX-3106 Control Unit (2.5 mm2) Neutral Consult Lutron for: • Non-dim relay wiring. • Load side emergency transfer wiring. Low-Voltage Class 2 (PELV) Wiring • System communications use low-voltage Class 2 (PELV) wiring. • Wiring must be daisy-chained. • Wiring must run separately from line (mains) voltage. Class 2 (PELV) wiring link requires: Two #12 AWG (2.5mm2) conductors for control power. One twisted, shielded pair of #18 AWG (0.625mm2) for data link. Total length of Control Link may be up to 2,000 ft. (610m). Approved low-voltage cable is available from Lutron1, Belden, and Liberty. These are approved with #22 AWG data link wires. Control Interface Control Unit Wallstations Power Supply External 12VDC Power Supply is 1 required to power more than three GRX-CBL-346S Class 2 (PELV) wiring cable is available from Lutron and contains: Wallstations and/or Control Interfaces Two #12 AWG (2.5mm2) conductors for control power. from a single Control Unit. One twisted, shielded pair of #22 AWG (0.625mm2) for data link. R S P E C I F I C AT I O N S U B M I T TA L Page 6 Job Name: Model Numbers: Job Number:
- 7. ® GRAFIK Eye 3000 Series Preset Dimming Controls 3000-17 06.11.04 Class 2 (PELV) Terminal Connections • Each Class 2 (PELV) terminal accepts up to two #18 AWG (1.0mm2) wires. • Daisy chain the terminal 1, 3, and 4 connections to all Control Units, Wallstations, and Control Interfaces. • Each Control Unit has its own power supply. Terminate the terminal 2 connection (12VDC power) so that each Control Unit supplies power to a maximum of three Wallstations. Each Wallstation should receive power from only one Control Unit. • Total length of Class 2 (PELV) wiring may be up to 2,000 ft. (600m). • Make all connections in the Control Unit’s wallbox. Remote connections (T-taps) must be in a switchbox or junction box with a maximum wire length of 8 ft. (2.5m) from the link to the connected unit. • Do not allow Class 2 (PELV) wires to contact line/main wires. Rear View of GRAFIK Eye Control Unit Rear View of GRAFIK Eye Control Unit (GRX-3106 shown) (GRX-3106 shown) A1 A3 5 4 3 2 1 2 3 4 1 2 3 4 1 A2 and A3 A3 powers Wallstations have their own 2, 3, and 4 – No terminal 6 power supplies – No. 2 connection Lutron Cable, no terminal No. 2 2 between Wallstations GRX-CBL-346S 1 connection 4 and 5 4 3 4 2 1 4 3 3 2 2 4 1 3 1 4 3 2 2 1 7 A4 powers Wallstations 1 5, 6, and 7 – no terminal A1 powers 1 only – 3 No. 2 connection between 4 terminal No. 2 connection 4 3 2 Wallstations 4 and 5 3 1 terminates at Wallstation 1 2 4 1 3 2 1 A2 4 A4 4 3 2 1 4 3 2 1 4 3 2 4 1 3 2 1 Rear View of GRAFIK Eye Control Unit Rear View of GRAFIK Eye Control Unit (GRX-3106 shown) (GRX-3106 shown) Note: • Up to 8 GRAFIK Eye 3000 Series Control Units and 16 Wallstations/Control Interfaces may be daisy-chained together in one system. • Class 2/PELV cable is available from Lutron - order GRX-CBL-346S. R S P E C I F I C AT I O N S U B M I T TA L Page 7 Job Name: Model Numbers: Job Number:
- 8. ® GRAFIK Eye 3000 Series Preset Dimming Controls 3000-18 06.11.04 GRX-12VDC Power Supply Wiring External 12VDC Power Supply is required to power more than three Wallstations and/or Control Interfaces from a single Control Unit. Rear View of GRAFIK Eye Control Unit (GRX-3106 shown) ZONE 2 ZONE 1 ZONE 4 CU WIRE ONLY ZONE 3 ZONE 6 ZONE 5 Lutron cable CLASS 2 USA GRX-CBL-346S Wallstation Wallstation Wallstation Wallstation 1 2 3 4 Class 2 HOT/LIVE IEC PELV SSA NEUTRAL 1 twisted pair 2 twisted pair #18 AWG (1.0mm2) 123456 123456 123456 12345 6 #18 AWG (1.0mm2) 4 4 4 4 3 3 3 3 2 2 2 2 1 1 1 1 Common 1 #18 AWG (1.0mm2) (+) 12VDC Wallstations/Control Interfaces (16 Maximum) To Power Source GRX-12VDC Note: Do not connect terminal No. 2 between GRAFIK Eye 3000 Series Control Unit and GRX-12VDC Power Supply R S P E C I F I C AT I O N S U B M I T TA L Page 8 Job Name: Model Numbers: Job Number: