hatata cv 2015

hatata cv 2015

• 1.
  1 CURRICULUM – VITAE Facilityand Inspection Engineer ------------------------------------------------------------------------------------------------------------------------------------------- Full Name : Mohamed Abd Ellatif Abd Ellatif Hatata Marital status : Married Passport No. : A00994290 Nationality : Egyptian Date of birth : 10ᵗ ͪ of October 1977 Phone : +2 01223534523 (Egypt) E-mail : [email protected] Qualification:  B.Sc. in metallurgical and material science engineering, Faculty of Petroleum and Mining Engineering, Suez Canal University – graduation year 2001  C-SWIP welding inspector 3.1 (Certificate No. 29755 )  API 570 Certified Piping Inspector ( Certificate No. 39974)  API 510 certified pressure vessel inspector (Certificate No.48953 )  ASNT Level II in RT, PT & MT. Experience Outline Over 13 years’ experience of extensive integrity & Inspection and construction for major oil and gas field including the following:-  Provide recommendations on choice of repair procedures for piping ,storage tanks and pressure vessels , selection of materials etc. in accordance with Company’s and international standard  Demonstrate effective overall leadership and partnership with all departments  Assist and participate in the design of new oil plant projects Like well heads design & water flood system design etc.  Demonstrate commitment in establishing and maintaining the company procedures and processes; HSE, Security and Emergency Response etc  Check & manage periodically audit on site to verify the application of agreed work plans, during pre-commissioning, commissioning and startup of work activities  Participate in HAZOP, HAZID, Incident Investigation and Risk Assessments  Ensure and approve written procedures and management of change processes (MOC) is mandatory for all work activities  Ensure that investigations and lessons-learned are communicated and followed with focus on improving WD safety performance  Inspect plant stationary equipment by entering into vessel, to check condition of equipment. Includes noting observations on cracks, pits, thinning and any other patterns of erosion, corrosion and other interior failure. And evaluate the inspection findings , provide repair procedure to restore the required designed data  Provide support to the piping and equipment layout design relevant to the assigned unit or area.  Review piping general arrangements and piping isometrics relevant to the assigned unit or area.  Manage piping isometrics in the reference P&IDs.  Provide piping material takeoffs and bill of materials documents. Oversee piping and layout design specifications and construction standards  To supervise and participates in non-destructive testing of equipment and piping, including review of preliminary interpretations carried out by subordinates
• 2.
  2 Employment History:  FromDecember 2010 Till now, my employer is Apache corp. at Western Desert filed (Khalda Joint venture ) as Senior integrity Inspection engineer .  From October 2006 up to October 2010 ,I Have been worked for BP EGYPT , at Western desert filed (GUPCO Joint venture) as an facility inspection and construction Engineer  From April 2005 up to October 2006 ,I Have been worked for Quality control company , at Western desert filed (GUPCO) as QA /QC Engineer  From July 2004 up to march .2005 I have been worked for Bonatti company , located in Libya , as Welding inspector Engineer  From March 2003 up to June 2004 , I have been work for DSD Ferometalco , located in Egypt ,as QA/QC Engineer Experience Details: From December 2010 till Now Location : Western Desert . Egypt Employer : Apache Corp, Company : KHALDA PETRELUEM COMPANY Title : Senior stuff facility inspection engineer My Duties and responsibilities as following:-  Assist and approve in the design of new projects Like water flood systems & oil manifolds & new well head design of oil and gas well ,Tie in of new well with existing facility  Provide recommendations on choice of repair procedures for piping ,storage tanks and pressure vessels , selection of materials etc. in accordance with Company’s and international standard  Issue Repair procedure for storage Tanks for Bottom replacement and shell insert plates  Inspect plant stationary equipment by entering into vessel, to check condition of equipment. Includes noting observations on cracks, pits, thinning and any other patterns of erosion, corrosion and submit repair procedure  Ensure written procedures and management of change processes (MOC) is mandatory for all work activities  Participate and Leader in planning shut down inspection activities.  Review inspection reports and evaluate equipment integrity.  Review test packages and punch lists, witness and approve pre-commissioning cleaning gouging, hydrostatic tests, Flushing and commissioning work.  Responsible for the approval all the time frame of new projects.  Review job safety specifications for pipelines operation and project tie-in and isolation requirements  Review job specifications for piping fabrication, inspection and testing, and hydro test, commissioning and startup Procedures for new and existing pipelines.  Provide support to the piping and equipment layout design relevant to the assigned unit or area.  Review piping general arrangements and piping isometrics relevant to the assigned unit or area. Manage piping Isometrics in the reference P&IDs. –  Provide piping bulk material takeoffs and bill of materials documents. Oversee piping and layout design specifications and construction standards
• 3.
  3  Provide guidancefor performing corrosion calculations and interpretation of metallurgical codes and standards with its imprecision on detail design.  Work effectively as a project engineer or site team leader on delegated tasks including co-coordinating and allocated resources and collect all required material  Maintain professional engineering standards in all activities. Ensure that safety, environmental protection and statutory requirements are satisfactorily addressed. Act ethically and encourage others to do From October 2006 up to October 2010 Location : Western Desert . Egypt Employer : IBS - BP EGYPT, Company : GUPCO PETRELUEM COMPANY – BP joint venture Titel : integrity inspection engineer Duties and responsibilities as following:  Provide recommendations on choice of repair procedures for piping ,storage tanks and BV, selection of materials etc. in accordance with Company’s and international standard  Demonstrate commitment in establishing and maintaining the company procedures and processes; HSE, Security and Emergency Response etc  Review previous inspection history of all refurbished equipment.  Inspection of refurbished pressures equipment such as Separators, Knock out drums, Scrubbers, and storage tanks etc.  Ensure that investigations and lessons-learned are communicated and followed with focus on improving WD safety performance  COW (Control of work ) training trainer including AA & PA training  Supervision and follow up welding, heat treatment and, Non-Destructive testing of refurbished equipment and during the fabrication of new components.  Check & manage periodically audit on site to verify the application of agreed work plans, during pre-commissioning, commissioning and startup of work activities  Ensure written procedures and management of change processes (MOC) is mandatory for all work activities  Ensures that the asset registry for fixed equipment is maintained and communicates threats to operation  Assist and participate in the design of new oil plant projects Like well heads design & water flood system design etc  Provide fabrication QA and QC support for new projects, working in cooperation with the Integration and Project Support group  To identify areas of concern and propose inspection procedures to follow-up their resolution to improve Plants Integrity.  To comply with all company Health, Safety and Environment as well as Work Permit, policies and procedures. From April 2005 up to October 2006 Location : Western Desert . Egypt Employer : Quality control company Company : GUPCO PETRELUEM COMPANY – BP joint venture Titel : QA /QC Engineer Duties and responsibilities as following:  Prepare Inspection Close out reports For plot piping Inspections, reviews results, do remaining life analysis and provide recommendations.
• 4.
  4  Carry outthermal Insulation/lagging inspection for vessels and pipelines.  Ensures that completed work and services furnished by the contractor are in compliance with company standard  Review raw material certificates  Monitoring &inspection for all welding activities for pipeline and steel structure , tanks and pressure vessels  Review all welding procedures.  Follow up welder performance test.  Supervision of fabrication stage.  Radiographic testing interpretation. From July 2004 up to March .2005 Project : western Libya gas Nc 41 onshore gas treatment plant (Mellita) Client : AGIP GAS B Employer : Bonatii Title : Welding inspector engineer Duties and responsibilities as following  Perform Inspection activities and it’s reporting according to the scope of work. -at all stages of projects. And make sure that work is in compliance with the standards, procedures and specifications of the project contract.  Inspect material & equipment to ensure compliance with standards and project contracts -Writing periodical inspection reports and initiate (NCRs),  Witnessing and verification welder’s qualification, welding procedure and Procedure qualification and approval.  Supervision during fabrication , welding and erection of API 650 - storage tanks ,Reviewing inspection test plan , specifications and method of statement of piping installation Dimension Check for Drawing to Be Within Allowance of Standard  Conduct routine/regular surveillance, inspections on the activities involving welding, materials, dimensional inspection on completed structures including witness/review NDE results , quality plans and check /approve inspection reports .  Reviewing piping/tanks test packages & issue punch lists & supervision air blowing inside piping spools(cleaning) and flushing , hydro-test of piping, pipelines, tanks and vessels, verifying re-instatement of piping after completion of installation and reviewing /issue mechanical completion From March 2003 up to June 2004 Company : DSD Ferro metalco Title : QA /QC Engineer Project : Egypt LNG (liquefaction natural gas) in Damietta nickel storage tanks (9 % NI ) Duties and responsibilities as following  Monitoring &inspection for all welding activities and installation for two tank 150,000 cubic meter capacity  Supervision of fabrication stage.  Radiographic testing interpretation.  Final documents and release.  Checking &periodically auditing on site to verify the application of P.Q.P  Reviewing &approaching distribution of P.Q.P to Protect quality plane  Periodical calibration of measuring &testing equipment &maintenance of record of the calibration activities
• 5.
  5  Assistance indiscussion on the quality system with Client where appropriate.  Tacking the suitable correction / preventive action related to the non-conformities of the product, follow up and issue inspection reports and record for equipment performances.  Evaluate equipment condition as per inspection findings and gives the necessary warnings and recommendations with respect to equipment remaining life time, equipment isolation from service, spare ordering, temporary and permanent repairs and modifications. Training Courses COURSE DATE LOCATION Welding metallurgy/Material test (destructive and nondestructive test) July,2001 Egypt Heat treatment/Corrosion and corrosion control/Metal forming Oxidation at high temperatures Thermodynamics and kinetics in metallurgy. August,2000 Egypt Radiographic Testing January,2004 Egypt Dye - Penetrant Testing January Egypt Magnetic Particles Testing January Egypt Certified welding inspector Cswip 3.1 June ,2007 Egypt H2S/Breathing Apparatus July,2008 Egypt Lifting authority by sparrow July,2008 Egypt API 510 Certified pressure vessel inspector Feb.2012 Egypt API 570 Certified Piping Inspector July,2010 Egypt Confined Space Entry Nov.2012 Egypt Working at high 2007 Egypt Permits to work & hazards identification 2006 Egypt Control of work training trainer 2008 Egypt Energy isolation 2009 Egypt Failure analysis workshop 2014 Egypt Incident investigation workshop 2014 Egypt Codes, Standards And Specifications Exposures: ASME Sec. ( I, II,IV, V, VIII, IX ) & other sections ANSI – ASME ( B 31.1, B 31.3 ) ) & other sections API-(510,570,580,581,1104,650,653,620)&other sections AWS D1.1 ASTM - ASME - NACE- BS- BP- GUPCO Specification Computer Background: Word AutoCAD Power point Internet Excel