internship report on working & types of drilling machine

Internship Project
Working & Types of Drilling Machine
Submitted
to
Parul University

Scope of Project :-
In this project we have tried to relate our learning from 3rd semester of B.Tech Mechanical Engineering with
daily working process inside the factory.
In Manufacturing Processes we have learned and studied about the various types of drilling machine & their
purpose, working principle and parts of all types.

 Introduction
 Working Principle
 Construction
 Specification For Portable
Drilling Machine
 Types Of Drilling Machine
 Operation Of Drilling Machine

The drilling machine or drill
press is one of the most
common and useful machine
employed in industry for
producing forming and
finishing holes in a work piece.
The unit essentially consists
of:
1. A spindle which turns the tool
(called drill) which can be
advanced in the work piece
either automatically or by
hand.
2. A work table which holds the
work piece rigidly in position.

The rotating edge of the drill
exerts a large force on the work
piece and the hole is
generated. The removal of
metal in a drilling operation is
by shearing and extrusion.
Use:- Drilling machine is used
to drill blind and through holes
in work pieces.

The machine has only a hand feed
mechanism for feeding the tool
into the work piece.
This enables the operator to feel
how the drill is cutting and
accordingly he can control the
down feed pressure.

Bench Drilling Machine :- The simplest
type of sensitive drilling machine is
shown in figure. This is used for light
duty drilling work. This machine is
capable to drill hole up to 12.5mm
diameter
1. Motor :- An electric motor supplies the
required driving force to stepped pulley.
2. Base :- Base is the bottom part of
machine in which the column is fitted
upright.
3. Feed handle :- Handle is provided to
feed the drill in to the work piece. A
rake and pinion mechanism is provided
to drive the chuck.

4.Column:- Column is the main
cylindrical part of drill machine on which
the other components are mounted.
5.Belt guard:- Belt guard is provided to
cover the belt and pulley drive
mechanism to minimize the hazard of
accident.
6.Chuck:- Chuck is provided to hold the
drill of different sizes up to 6.5 mm. Drill
size of more than 6.5 mm are to be fitted
directly in the Morse taper of spindle
7.Work Table:- Work pieces are mounted
and held in position by the table. This
table can be tilted for drilling at an angle.

DESCRIPTION SPECIFIED
CAPACITY
•Drilling Capacity in Steel of 60
Kg/mm²Tensile Strength
•Tapping Capacity in Steel of
60 Kg/mm² Tensile Strength
50 mm(min.)
50 mm(min.)
SPINDLE
•Spindle feed traverse
•Spindle Morse Taper
•Spindle Ovality
350 mm(min.)
MT5/MT 6
0.005(max
.)
SPINDLE SPEED AND FEEDS
•Spindle Speeds (Range)( Approx.)
•Number of Speed steps
•Feed range (Approx.)
•Number of feed steps
16 – 800 RPM
15(min.)
0.05 - 0.5
mm/rev
6(min.)

TRAVERSES
•Vertical Travel of Arm (Min)
•Range of Swing of Arm
•Traverse of column in bed
2400mm(min
.) 0-360
Deg.
1200mm(min.)
DISTANCES
•Swing Radius of drilling
spindle
2250 mm( min)
1420 mm( Max.)
•Farthest Distance of Spindle
end
2700mm( min)
from floor when horizontal
drilling
•Lowest Distance of Spindle
end
300 mm ( max)
from floor when horizontal

 Portable Drilling
Machine
 Sensitive or Bench Drill
Drilling
Machine(Sing
le
Drilling
Machine(Turr
et
 Uprigh
t
Spindle)
 Uprigh
t
Type)
 Radial Drilling Machine
 Multiple Spindle Drilling
Machine
 Deep Hole Drilling Machine
 Gang Drilling Machine
 Horizontal Drilling Machine
 Automatic Drilling Machine

It is a very small, compact and
self contained unit carrying a
small electric motor inside it.
It is very commonly used for
drilling holes in such
components that cannot be
transported to the shop due to
their size or weight or where
lack of space does not permit
their transportation to the
bigger type of drilling machine.
In such cases, the operation is
performed on the site by means
of the portable electric drill.

This type of drilling machine is
used for very light work.
Its construction is very simple
and so is the operation .
It consists of as shown in fig. of
a cast iron having a fixed table
over it.

This machine is very useful
because of its wider range of
action.
Its principal use is in drilling
holes on such work is difficult
to be handled frequently.
With the use of this machine,
the tool is moved to the
desired position instead of
moving the work to bring the
latter in position for drilling.

• Drilling
• Reaming
• Boring
• Counter
Boring
• Counter
Sinking
• Spot Facing
• Tapping

 Drilling :- It is the
main operation done on this
machine. It is the
operation of producing a
circular hole in a solid metal by
means of a revolving tool
called drill.
 Boring :- It is an operation
used for enlarging a hole to
bring it to the required size
and have a better finish.
 Counter sinking :- It is the
operation used for enlarging
the end of a hole to give it a
conical shape for a short
distance.

• Reaming :- It is the
operation of finishing a hole
to bring it to accuratesize
and have a fine surface
finish . This operation is
performed by means of a
multi tooth tool called reamer.
• Counter boring :-This
operation is used for enlarging
only a limited portion of the
hole is called counter boring .
• Tapping:- It is the
operation done for forming
internal threads by means of
the tool called tap.

internship report on working & types of drilling machine

internship report on working & types of drilling machine

More Related Content

What's hot (20)

Similar to internship report on working & types of drilling machine (20)

More from prabhatkumarsamal (7)

Recently uploaded (20)

internship report on working & types of drilling machine