Maximo Oil and Gas 7.6.1 HSE: Asset List Routes

Maximo Oil and Gas 7.6.1 HSE: Asset List Routes

• 1.
  Maximo Oil and Gas7.6.1 Maximo HSE Manager 7.6.1 Application Overview Asset List Routes
• 2.
  Asset List Example usecases: 1.Campaign maintenance 2.Relate multiple Assets and Locations requiring common action in Action Tracking 2
• 3.
  List View 3
• 4.
  Asset List tab 4 Usethese buttons to quickly select a related group of Assets or Locations Use these buttons to quickly select a related group of Assets or Locations Add a Campaign reference if the Asset List is being used to support campaign maintenance Add a Campaign reference if the Asset List is being used to support campaign maintenance
• 5.
  Add Multiple Locations/Assets buttons 5 Select Locations andSelect Assets dialogs are driven from these buttons Select Locations and Select Assets dialogs are driven from these buttons
• 6.
  Routes clone The followingslide outlines the changes made to the out of the box Routes application 6
• 7.
  Changes to Route tab,Route Stops 7 Additional fields associated with Oil and Gas/HSE Job Plan clone Additional fields associated with Oil and Gas/HSE Job Plan clone
• 8.
  Preventive Maintenance clone The followingslides outline the changes made to the out of the box Preventive Maintenance application. 8
• 9.
  PM tab changes 9 Crossesover from Location Crosses over from Location Add a Certification Template. When a WO is generated a new Certification record will be created based on the template, linked to the generated Work Order Add a Certification Template. When a WO is generated a new Certification record will be created based on the template, linked to the generated Work Order
• 10.
  PM tab changes– Work Order Information 10 These fields cross over from the Job Plan header These fields cross over from the Job Plan header
• 11.
  PM tab changes– Production Impact section 11 Use to identify the impact of this PM when work is generated. Alternatively if different Job Plans are applied as part of a Job Plan sequence use production impact from the Job Plan Use to identify the impact of this PM when work is generated. Alternatively if different Job Plans are applied as part of a Job Plan sequence use production impact from the Job Plan
• 12.
  Changes to Job PlanSequence tab 12 These fields cross over from the Job Plan Task These fields cross over from the Job Plan Task
• 13.
  Regulations tab 13 Add multiple Regulationsto the PM Add multiple Regulations to the PM