Transactive Energy article 2013

Transactive Energy article 2013

• 1.
  METERING INTERNATIONAL ISSUE- 3 | 201368 SMART ENERGY Demand response as originally conceived and implemented over most of the past 30 years to provide emergency response and peak load management has become an important power system resource. However, fundamental forces are creating dramatic changes in the operation of markets and the electric transmission and distribution grids, creating additional opportunities for a new class of fast, flexible and continuously responsive distributed energy resources (DER). Customer energy resource options may include flexible onsite generation, demand response, storage, power electronics and electric vehicles. These forces are: 1. An evolution in customer behaviour and expectations, with greater demand for reliable electricity and self-reliance, including becoming both an energy consumer and producer, or “prosumer”. 2. Policy driven reliance upon renewable, intermittent resources and a shift to more decentralized energy resources. 3. Massive energy efficiency investments and structural changes related to codes and standards are yielding greater energy productivity relative to GDP. 4. Technological advancement leading to alternative methods and designs for providing and integrating services to the grid that are provided by customers’responsive resources, including demand management, onsite generation and energy storage. The success of demand response was recognized in the North American Reliability Corporation’s (NERC) 2012 Long Term Resource Adequacy (LTRA) report. The report identified that increased availability of demand side management (DSM) over the next 10 years to reduce peak demands, will contribute to the deferral of new generating capacity or improve operator flexibility in day‐ahead or real‐time time operations. The electric power system is evolving to become one of enormous complexity combined with local constraints. The US Energy Information Agency (EIA) projects renewable energy, excluding hydropower, will account for 32% of the overall growth in generation from 2011 to 2040. Meanwhile, US electric distribution system may need to integrate over 150 GW of distributed solar photovoltaic (PV), combined heat and power (CHP) and storage by 2020. This, in addition to over 170 GW of back-up generation already installed. Market and system variability is increasing and operational temporal dimensions are declining across transmission and distribution. This transformation of the electric generation mix and the rise of prosumerization are driving the need for changes in both market designs and grid operations. This is driving the need for a new set of responsive capabilities at greater scale than existing demand response programs and with distinctly different characteristics to support the need for flexible market and grid resources. US Federal Energy Regulatory Commission (FERC) chairman Jon Wellinghoff discussed this evolution in his remarks at the White House Demand Response Forum earlier this year and again at the recent US Department of Energy (DOE) sponsored Transactive Energy Conference. This objective could be described as: “The ability of flexible distributed energy resources including responsive demand, onsite generation, energy storage and electric transportation to provide dynamic and continuous response based on direct or indirect value information to the mutual benefit of customers and a broad range of parties including load serving entities, services firms, aggregators, grid operators, and wholesale and local balancing markets through economic transactions.” POWER SYSTEM EVOLUTION Demand response has proven its ability to successfully compete with generation in these markets. Load as a capacity resource was reported to total over 19.3 GW in 2012 and forecast to grow to over 35 GW by 2015 in the 2012 FERC DR survey. Last year, the PJM independent system operator (ISO) reported a record 14.8 GW of demand response cleared their reliability pricing model auction for 2015-16. The maturity of load as a capacity resource is an important step in the evolution of demand response and other flexible distributed energy resources to potentially provide a broader range of bulk power system services. These include a growing set of ancillary services: • Spinning reserve: portion of unloaded capacity from units already connected or synchronized to grid that can deliver energy in 10 minutes and run for at least two hours. • Non-spinning reserve: extra generating capacity not currently connected or synchronized to grid that can be brought online and ramp up to a specified load within ten minutes. • Regulation: used to control system frequency that can vary as generators access the system and must be maintained very narrowly around 60 Hz. While the total amount available in 2012 was comparatively small at over 1.3 GW, the projection in the FERC survey data suggests a strong growth pattern. Also, the collective effect of wind and solar PV generation patterns may create very large transitions several times each day. As depicted in Figure 2, the California ISO (CAISO) has determined that net load from variable and customer energy resources in the state will create several short dramatic swings daily, reaching as high as 13.5 GW in 2 hours. The swings, or ramps, have traditionally resulted from load patterns that rise in the morning to a mid-to-late afternoon peak and subsequent decline in the evening. To address these two fundamental operating challenges a range of new and expanded bulk power system services are needed. Services TRANSACTIVE ENERGYby Paul De Martini Figure 1 – Evolution of DR/flexible DER
• 2.
  METERING INTERNATIONAL ISSUE- 3 | 2013 69 SMART ENERGY such as regulation and contingency reserves should be expanded and new services for frequency (including inertial response), ramping and unit commitment introduced. These services will primarily come from existing and new flexible fossil fueled plants. However, constraints across sub-regional transmission corridors and into load centres will require local resources as well. As such, it will be necessary to tap a wider range of resources, including responsive demand, energy storage and dispatchable distributed generation. As such, a new class of responsive distributed energy resources will be needed as part of the policy and engineering alternatives to help manage the power system both in terms of economic efficiency and reliability. These new services will expand on current growth of ancillary services provided by demand response in the US and represent an evolutionary approach to the potential for customers’to provide market and grid services. However, the inability to create and monetize value through additional differentiated services for the grid is impeding development. Addressing this is essential to providing compelling value to customers and enabling new business models. One way to create value is to open up opportunities for responsive DERs to participate in a broad range of services required across the grid. This requires transparent pricing and monetization methods. While simple in concept, it is much more complex in practice as the response characteristics to meet bulk power and distribution operational needs are more stringent and complex than those for most traditional demand resources. DIFFERENTIATED SERVICES AND VALUE The range of services that responsive DERs may be able to provide is broad. It spans the bulk power system, distribution operations, and customer actions. The table in Figure 3 was adapted and expanded from an energy storage value assessment by Southern California Edison (SCE) in 2011. Thirty different value streams are identified that conceivably may increasingly be met by DR 2.0 resources over this decade. Today, however, customers can only monetize a handful of these services. The challenge and opportunity is to continue to unlock services that will fully maximize the value potential for customers and other stakeholders. The challenge for several of these services is that responsive resources must be able to meet a prearranged level of measurable and observable operational performance during a contract period. Services to reduce peak demand or balance real time system operations need to meet very different performance requirements. As the use of responsive demand and other flexible DER expands beyond reliability and peak management programs to market-based balancing services the criteria for performance guarantees will become more stringent. Many of these services do or will require clever techniques to continuously tap the potential of customers’distributed loads, generation, storage and electric vehicles without negatively affecting customers’ operations, comfort or convenience while also providing compelling financial compensation. The power system is comprised of end-use devices and increasingly distributed resources (e.g. onsite generation, power electronics and storage) that are inherently flexible. This flexibility can allow energy consumption or production to be shifted to another time without impacting customers’operations. Similarly, many temperature sensitive loads exhibit flexibility in power demand, as their temperatures are not restricted to a single value, but rather are allowed to float within a specified band of temperatures. In both cases, flexibility in demand amounts to a continuum of potential response to satisfy grid operations and customer need. The same is true of other customer resources like CHP, which often has some flexibility in output that won’t affect customer needs. An issue is how to design market rules to“extract this flexibility”. Markets allow energy resources to be valued, priced and monetized. As such, it will be necessary to develop market designs and controls architecture that align customer, services firm, grid operator and market operator interests. Efficiency of such markets will depend on designs that (a) allow simple choices and low transaction costs, (b) enable customer price and quantity risk management, and (c) offer final customer decision“control”. Figure 2 – CAISO 2013-2020 net load Figure 3 – Potential responsive DER value
• 3.
  METERING INTERNATIONAL ISSUE- 3 | 201370 SMART ENERGY TRANSACTIVE ENERGY Transactive energy refers to the use of economic transactions to coordinate distributed energy resources to meet multiple generation, transmission and distribution objectives. It accomplishes that coordination using information regarding economic value across balancing markets and distributed grid control systems which results in the exchange of value signals among all participants, including customers. These signals can be sent via utility tariffs, power purchase agreements, real option contracts, market procurements or auctions. Transactive energy is a broad concept that ranges from existing automated incentive- based demand response programs through advanced value driven control techniques like those being demonstrated in the DOE co- funded Pacific Northwest Smart Grid Demonstration project. The DOE-sponsored GridWise® Architecture Council (GWAC) formally defines transactive energy as, “Techniques for managing the generation, consumption or flow of electric power within an electric power system through the use of economic or market based constructs while considering grid reliability constraints. The term ‘transactive’ comes from considering that decisions are made based on a value. These decisions may be analogous to or literally economic transactions.” The vision for the evolution of transactive energy over this decade is that optimization and control will increasingly be distributed and associated with various participants, devices and systems at the edges of the grid. Coordination is enabled through integrated and federated market and control systems. Increasingly, customers can transact with any other party including intermediaries. The approach also envisions an expanding range of services and values enabled through regulatory policy. Transactive grid oversight will continue through federal, state and local regulatory agencies and grid operators enforce market rules, grid security, reliability and grid standards and collect, analyze and publish information on grid constraints and capabilities to all parties. Structural market changes evolve through more customer participation in the markets, more distributed generation, transitions to competitive markets, and reductions in any market power. Coordination of changes in retail, distribution, transmission and wholesale markets will be helpful and often necessary. In more advanced applications, transactive energy distributes decision making throughout the system. When done properly, distributed values incorporate prices and constraints across the system to achieve reliable results. As the Pacific Northwest National Lab identified, centralized approaches cannot scale to coordinate and dispatch hundreds of thousands of distributed energy resources. This is especially the case given that many of these resources will be integral to customers’operation like data centre management systems, building energy management systems or CHP units. The reason is that centralized approaches become unwieldy with increased numbers of responsive (or controllable) system elements. As the power system approaches millions of responsive distributed resources, the computational and timing complexity of trying to optimize through centralized dispatch becomes intractable. For example, trying to calculate such an optimum dispatch on a five-minute time interval to offset renewable resource variability is unlikely to work. This is further compounded with very short duration resources needed to manage distribution level power quality. Engineering approaches, such as Cisco’s ultra-large scale control architecture can help resolve the need for distributed and coordinated decision making that allows for individual optimization by customers, distribution operators and bulk power system operators. Also, GWAC is currently developing the necessary framework, guidelines and architecture to support this evolution and alignment with the fundamental principles of reliable grid operation. Likewise, the related protocols and standards, including OpenADR 2.0 and Smart Energy Profile 2.0 are also available or being finalized. Additionally, the more advanced control algorithms and methods are currently being researched in government labs and universities and corporate research centres globally. In several cases, technology development has reached initial commercial stage and being demonstrated in pilots around the world. Over the coming decade a number of significant evolutionary milestones should allow customers’flexible DER to provide market and grid services. This envisions an evolution from today’s use of load as a capacity resource and the emergence of opportunities for DR in ancillary services to expand to a much broader use of flexible DER. It could be that more than half the services identified earlier will be accessible to customers with qualified flexible distributed resources in California and in a Mid- Atlantic or Northeastern state by 2020. This projection is based on foundational rulings by FERC, including 745, 755 and 784, combined with state renewable portfolio standards and demand side management goals, and forecasts of 400+ GW of distributed resources by 2020. These all suggest that the fundamental forces of change are already in motion. However, the pace and scope of market access and customer participation across the US will continue to evolve unevenly. Plus, customer participation in more advanced services will likely continue to face challenges regarding tangible financial value at perceived acceptable level of participation risk. This is why a primary focus now and continuing over this decade involves creating differentiated services, resolving market access issues and creating successful customer value propositions. More specifically, barriers to unlocking the value from flexible distributed energy resources exist including: 1. Lack of power system service definitions and performance requirements 2. Insufficient technology investment 3. Revenue availability and monetization 4. Market access 5. Customer adoption and engagement. In addition, the transactive energy evolution requires the active and sustained support of policy makers to enact or change myriad rules addressing each of the five barriers above. This is not simple nor will it be quick. As such, flexible DER will only be part of the solutions, including flexible low cost gas fired generation and other more conventional means, to address the transformation of the power system. While there are a wide range of solutions and issues related to the future grid, the potential engagement of customers’flexible distributed energy resources to provide a greater set of services to markets and transmission and distribution operations offers a real potential for low cost and clean options to manage the increasingly dynamic power system. MI ABOUT THE AUTHOR Paul De Martini is Managing Director of Newport Consulting and visiting scholar at Caltech’s Resnick Sustainability Institute. [email protected]
• 4.
  METERING INTERNATIONAL ISSUE- 3 | 2013 71 SMART ENERGY Wasion FP advert