Networking alarm panel manuals
1 like144 views
The document provides instructions for three network alarm panels: HB-2050G, HB-4040G, and HB-5050G. It describes the connections, technical specifications, and functions of each panel. It also provides guidance on setting up the corresponding mobile app, including configuring account and alarm settings, adding detectors and remote controls, and setting arming schedules. The document instructs users on reading the LCD displays and indicator lights to understand the panel's status.
Networking alarm panel manuals
- 1. Manual Of Networking Alarm Panel HB-2050G HB-4040G HB-5050G
- 3. 网络报警主机使用说明 2 HB-2050G Connections of cables: SIM Card Slot: Only 2G SIM Card is available(Mini SIM) Power Interface:DC15V/1.5A Output Interface：DC12V/0.5A（Linkage other devices--Siren and etc） Set Button: Restore to the factory default Technical Parameters: Working Voltage DC 15V/1.5A Wireless Frequency 434.6MHz FSK GSM Frequency 900/1800/1900/2100 MHz Dimension 103x110x49（mm）
- 5. 网络报警主机使用说明 4 HB-4040G Connections of cables:
- 6. 网络报警主机使用说明 5 SIM Card Slot: Only 2G SIM Card is available(Mini SIM) Power Interface:DC15V/1.5A Output Interface：DC12V/0.5A（Linkage other devices--Siren and etc） Set Button: Restore to the factory default Technical Parameters: Working Voltage DC 15V/1.5A Backup Battery 4×3.2V LiFePO4 Battery Wireless Frequency 434.6MHz FSK GSM Frequency 900/1800/1900/2100 MHz Dimension 163x146x16（mm） 3.HB-5050G
- 7. 网络报警主机使用说明 6 HB-5050G Connections of cables
- 8. 网络报警主机使用说明 7 HB-5050R Connections of cables Outputs Jumpers(Disable)：used to control the warning board status +12: If AC powered,work normally;If DC powered,work abnormally
- 9. 网络报警主机使用说明 8 OUT: Alarming Mode,the warning board will light; Arm or Disarm Mode,the warning board will blink; Warning Board Interface：DC12V/0.5A outputs Siren Interface：DC12V/0.5A outputs Power Interface:DC15V/1.5A SIM Card Slot: Only 2G SIM Card is available(Mini SIM) Set Button: Restore to the factory default Technical Parameters: Working Voltage DC 15V/1.5A Backup Battery 12V/1.3Ah Wireless Frequency 434.6MHz FSK GSM Frequency 900/1800/1900/2100 MHz Dimension 165x175x62（mm） 4.Instructions LCD Display: -01/01 (01Blinking) On Setting Mode -F0 Restored to factory default -F6 Connected to Server Success No Display Static working status,alarm panel has been connected the detectors or remote controls -XX (-Blinking) learning detector status（XX：01…99 zone number） _XX Learned detector success（XX：01…99 zone number） -XX Alarm（XX：01…99 zone number） -0X (-Blinking) learning remotes status（X: 1-4 zone number） _0X Learned remotes success（X: 1-4 zone number） -F5 Emergency Alarm(SOS) -F7 Connect to server failure
- 10. 网络报警主机使用说明 9 -F2 Deleted account information success -F8 SIM card faults HXX GPRS Signal less than 13（ＸX: 00-13） -F1 Tamper Indicator lights： Red: Arm Status White（2050G）/Yellow(4040G)/Green(5050G)：Disarm Status Delete Account Information：Press the “Setting Button”Once,LCD Display”-01”(01 Blinking),and then hold the “Setting Button”for 5 seconds ， Release the “setting button”when the LCD Display”-F2”; Restore to factory default：Press the “Setting Button”Once,LCD Display”-01”(01 Blinking),and then hold the “Setting Button”for 10 seconds ， Release the “setting button”when the LCD Display”-F0”; 5. APP Operation Manuals 5.1 Phone Configuration Smart Phone Above Android(4.0) Operating System ≥2G RAM ≥2G Storage Memory 5.2 Phone Setup→ Setting → Permissions → Saferhomee Write and delete SMS messages → Accept Read SMS messages → Accept Change mobile data connectivity → Accept
- 11. 网络报警主机使用说明 10 Change WLAN connectivity → Accept Setting → Permissions → Autostart Set Saferhomee can autostart 5.3 App Interface(Home):
- 12. 网络报警主机使用说明 11 All Arm: On receiving all the alarm information mode Disarm: On not receiving normal alarm information mode Part Arm: Disable Mute: Make the app silence when alarm SOS：Emergency Help 5.4 Account Setup(Account) Press”Account”--- enter password:123456
- 13. 网络报警主机使用说明 12 SIM Card of the alarm panel supports SMS?Please choose Yes/No according to functions of the SIM Card(If Yes,please fill the SIM card number) SIM Card Number：The SIM Card number of the alarm panel Alarm Panel ID：Fill the 15-digits Serial Number/Scan the OR Code Phone Number：The SIM Card number of the phone installed the App Setup Password：Original password is 123456(Please reset in”Setup”) Final,Press”Submit “ 5.5 Alarm Panel Setup(Setup)
- 15. 网络报警主机使用说明 14 Total 4 groups phone number can be set Standard Alarm Center SMS Number:Disable Transfer Alarm Center SMS Number:Disable Detector
- 16. 网络报警主机使用说明 15 Select the zone number(1--99) Select the zone type(Normal,Emergency,Fire,Help,Gas,Water) Fill the Notes and save the notes Press”Match “----and then trigger the detector once SMS Mode
- 17. 网络报警主机使用说明 16 Factory Default is Enable;If select the “Disable”,the alarm panel and the app will not keep communication if on offline status.. Remote Control
- 18. 网络报警主机使用说明 17 Select the remote control(1#--4#) Press “+” to add the remote control Press “-” to delete the remote control Timing Time
- 19. 网络报警主机使用说明 18 Query Timing Time: Querythe last timing time 2 groups of arm/disarm time can be set...press”√ ”to confirm. Password
- 20. 网络报警主机使用说明 19 Note:The password should be 6-digits Ademco ID &Server’s Domain Address are used to communicate with the SAFERHOMEE Alarm Software...(Disable) Time(Disable)