Nrpe - Nagios Remote Plugin Executor. NRPE plugin for Nagios Core

NRPE Documentation
Copyright (c) 1999-2007 Ethan Galstad
Last Updated: May 1, 2007
CONTENTSCONTENTS
Section Page
1. Introduction ...........................................................................................
a) Purpose ............................................................................................
b) Design Overview ...............................................................................
2. Example Uses .......................................................................................
a) Direct Checks ....................................................................................
b) Indirect Checks .................................................................................
3. Installation ............................................................................................
a) Prerequisites ....................................................................................
b) Remote Host Setup ..........................................................................
c) Monitoring Host Setup ......................................................................
4. Customizing Your Configuration ...........................................................
5. Upgrading .............................................................................................
6. Troubleshooting ....................................................................................
2
2
2
3
3
3
4
4
5
9
13
15
17

NRPE DocumentationNRPE Documentation
1. INTRODUCTION1. INTRODUCTION
a) Purpose
The NRPE addon is designed to allow you to execute Nagios plugins on remote Linux/Unix machines. The main
reason for doing this is to allow Nagios to monitor "local" resources (like CPU load, memory usage, etc.) on
remote machines. Since these public resources are not usually exposed to external machines, an agent like
NRPE must be installed on the remote Linux/Unix machines.
Note: It is possible to execute Nagios plugins on remote Linux/Unix machines through SSH. There is a
check_by_ssh plugin that allows you to do this. Using SSH is more secure than the NRPE addon, but it also
imposes a larger (CPU) overhead on both the monitoring and remote machines. This can become an issue when
you start monitoring hundreds or thousands of machines. Many Nagios admins opt for using using the NRPE
addon because of the lower load it imposes.
b) Design Overview
The NRPE addon consists of two pieces:
– The check_nrpe plugin, which resides on the local monitoring machine
– The NRPE daemon, which runs on the remote Linux/Unix machine
When Nagios needs to monitor a resource of service from a remote Linux/Unix machine:
– Nagios will execute the check_nrpe plugin and tell it what service needs to be checked
– The check_nrpe plugin contacts the NRPE daemon on the remote host over an (optionally) SSL-protected
connection
– The NRPE daemon runs the appropriate Nagios plugin to check the service or resource
– The results from the service check are passed from the NRPE daemon back to the check_nrpe plugin, which
then returns the check results to the Nagios process.
Note: The NRPE daemon requires that Nagios plugins be installed on the remote Linux/Unix host. Without these,
the daemon wouldn't be able to monitor anything.
Last Updated: May 1, 2007 Page 2 of 18 Copyright (c) 1999-2007 Ethan Galstad

2. EXAMPLE USES2. EXAMPLE USES
a) Direct Checks
The most straight forward use of the NRPE addon is to monitor "local" or "private" resources on a remote
Linux/Unix Machine. This includes things like CPU load, memory usage, swap usage, current users, disk usage,
process states, etc.
b) Indirect Checks
You can also use the NRPE addon to indirectly check "public" services and resources of remote servers that might
not be reachable directly from the monitoring host. For instance, if the remote host that the NRPE daemon and
plugins are installed on can talk to the a remote web server (but the monitoring host cannot), you can configure the
NRPE daemon to allow you to monitor the remote web server indirectly. The NRPE daemon is essentially acting
as proxy in this case.

3. INSTALLATION3. INSTALLATION
In order to use the NRPE addon, you'll need to perform some tasks on both the monitoring host and the remote
Linux/Unix host that the NRPE daemon is installed on. I'll cover both of these tasks separately.
Note: These instructions are based on a remote host running Fedora Core 6. Naming conventions, commands,
etc. vary across different Linux distros and UNIX variants, so the instructions provided here may have to be altered
a bit for your situation. If you're having trouble using these instructions, you can find OS/distribution-specific
installation guides, HOWTOs, and other helpful installation documentation on the Nagios Community wiki at
http://www.nagioscommunity.org/wiki/.
a) Prerequisites
In order to complete these installation instructions, you'll need:
– Root access on the remote Linux/Unix host
– Access to the nagios user account on the monitoring host
b) Assumptions
These instructions assume that you are installing the NRPE addon on a system that supports TCP wrappers and
has the xinetd superserver installed. Most modern Linux distributions and Unix variants have these installed by
default. If you have an older system that runs inetd (instead of xinetd) and/or does not support TCP wrappers, or
you want to run the NRPE daemon without inetd or xinetd, read the following files for information on installing the
addon (both are found in the main directory of the NRPE distribution):
– README
– SECURITY
[ Continued on next page ]

c) Remote Host Setup
These instructions should be completed on the remote Linux/Unix host that the NRPE daemon will be installed on.
You'll be installing the Nagios plugins and the NRPE daemon...
i. Create Account Information
Become the root user. You may have to use sudo -s on Ubuntu and other distros.
su -l
Create a new nagios user account and give it a password.
/usr/sbin/useradd nagios
passwd nagios
ii. Install the Nagios Plugins
Create a directory for storing the downloads.
mkdir ~/downloads
cd ~/downloads
Download the source code tarball of the Nagios plugins (visit http://www.nagios.org/download/ for links to the latest
versions). At the time of writing, the latest stable version of the Nagios plugins was 1.4.6.
wget http://osdn.dl.sourceforge.net/sourceforge/nagiosplug/nagios-plugins-1.4.6.tar.gz
Extract the Nagios plugins source code tarball.
tar xzf nagios-plugins-1.4.6.tar.gz
cd nagios-plugins-1.4.6
Compile and install the plugins.
./configure
make
make install
The permissions on the plugin directory and the plugins will need to be fixed at this point, so run the following
commands.
chown nagios.nagios /usr/local/nagios
chown -R nagios.nagios /usr/local/nagios/libexec
iii. Install xinetd
Fedora Core 6 doesn't ship with xinetd installed by default, so install it with the following command:
yum install xinetd

iv. Install the NRPE daemon
Download the source code tarball of the NRPE addon (visit http://www.nagios.org/download/ for links to the latest
versions). At the time of writing, the latest version of NRPE was 2.8.
cd ~/downloads
wget http://osdn.dl.sourceforge.net/sourceforge/nagios/nrpe-2.8.tar.gz
Extract the NRPE source code tarball.
tar xzf nrpe-2.8.tar.gz
cd nrpe-2.8
Compile the NRPE addon.
./configure
make all
Install the NRPE plugin (for testing), daemon, and sample daemon config file.
make install-plugin
make install-daemon
make install-daemon-config
Install the NRPE daemon as a service under xinetd.
make install-xinetd
Edit the /etc/xinetd.d/nrpe file and add the IP address of the monitoring server to the only_from directive.
only_from = 127.0.0.1 <nagios_ip_address>
Add the following entry for the NRPE daemon to the /etc/services file.
nrpe 5666/tcp # NRPE
Restart the xinetd service.
service xinetd restart

v. Test the NRPE daemon locally
Its time to see if things are working properly...
Make sure the nrpe daemon is running under xinetd.
netstat -at | grep nrpe
The output out this command should show something like this:
tcp 0 0 *:nrpe *:* LISTEN
If it does, great! If it doesn't, make sure of the following:
– You added the nrpe entry to your /etc/services file
– The only_from directive in the /etc/xinetd.d/nrpe file contains an entry for "127.0.0.1"
– xinetd is installed and started
– Check the system log files for references about xinetd or nrpe and fix any problems that are reported
Next, check to make sure the NRPE daemon is functioning properly. To do this, run the check_nrpe plugin that
was installed for testing purposes.
/usr/local/nagios/libexec/check_nrpe -H localhost
You should get a string back that tells you what version of NRPE is installed, like this:
NRPE v2.8
vi. Open firewall rules
Make sure that the local firewall on the machine will allow the NRPE daemon to be accessed from remote servers.
To do this, run the following iptables command. Note that the RH-Firewall-1-INPUT chain name is Fedora-
specific, so it will be different on other Linux distributions.
iptables -I RH-Firewall-1-INPUT -p tcp -m tcp –dport 5666 -j ACCEPT
Save the new iptables rule so it will survive machine reboots.
service iptables save

vii. Customize NRPE commands
The sample NRPE config file that got installed contains several command definitions that you'll likely use to
monitor this machine. The command definitions are used to (surprise) define commands that the NRPE daemon
will run to monitor local resources and services. The sample command definitions run some of the plugins that
were installed in step 2. You can edit the command definitions, add new commands, etc, by editing the NRPE
config file:
vi /usr/local/nagios/etc/nrpe.cfg
More information on customizing the commands can be found on page 13 in the section titled "Customizing Your
Configuration".
For the time being, I'll assume you're using the sample commands that are defined. You can test some of these
by running the following commands:
/usr/local/nagios/libexec/check_nrpe -H localhost -c check_users
/usr/local/nagios/libexec/check_nrpe -H localhost -c check_load
/usr/local/nagios/libexec/check_nrpe -H localhost -c check_hda1
/usr/local/nagios/libexec/check_nrpe -H localhost -c check_total_procs
/usr/local/nagios/libexec/check_nrpe -H localhost -c check_zombie_procs
At this point, you are done installing and configuring NRPE on the remote host. Now its time to install a
component and make some configuration entries on your monitoring server...
[ Continued on next page ]

d) Monitoring Host Setup
On the monitoring host (the machine that runs Nagios), you'll need to do just a few things:
– Install the check_nrpe plugin
– Create a Nagios command definition for using the check_nrpe plugin
– Create Nagios host and service definitions for monitoring the remote host
These instructions assume that you have already installed Nagios on this machine according to the quickstart
installation guide. The configuration examples that are given reference templates that are defined in the sample
localhost.cfg and commands.cfg files that get installed if you follow the quickstart.
i. Install the check_nrpe plugin
Become the root user. You may have to use sudo -s on Ubuntu and other distros.
su -l
Create a directory for storing the downloads.
mkdir ~/downloads
cd ~/downloads
cd nrpe-2.8
./configure
make all
Install the NRPE plugin.
make install-plugin

ii. Test communication with the NRPE daemon
Make sure the check_nrpe plugin can talk to the NRPE daemon on the remote host. Replace "192.168.0.1" in the
command below with the IP address of the remote host that has NRPE installed.
/usr/local/nagios/libexec/check_nrpe -H 192.168.0.1
You should get a string back that tells you what version of NRPE is installed on the remote host, like this:
NRPE v2.8
If the plugin returns a timeout error, check the following:
– Make sure there isn't a firewall between the remote host and the monitoring server that is blocking
communication
– Make sure that the NRPE daemon is installed properly under xinetd
– Make sure the remote host doesn't have local (iptables) firewall rules that prevent the monitoring server from
talking to the NRPE daemon
iii. Create a command definition
You'll need to create a command definition in one of your Nagios object configuration files in order to use the
check_nrpe plugin. Open the sample commands.cfg file for editing...
vi /usr/local/nagios/etc/commands.cfg
and add the following definition to the file:
define command{
command_name check_nrpe
command_line $USER1$/check_nrpe -H $HOSTADDRESS$ -c $ARG1$
}
You are now ready to start adding services that should be monitored on the remote machine to the Nagios
configuration...

iv. Create host and service definitions
You'll need to create some object definitions in order to monitor the remote Linux/Unix machine. These definitions
can be placed in their own file or added to an already exiting object configuration file.
First, its best practice to create a new template for each different type of host you'll be monitoring. Let's create a
new template for linux boxes.
define host{
name linux-box ; Name of this template
use generic-host ; Inherit default values
check_period 24x7
check_interval 5
retry_interval 1
max_check_attempts 10
check_command check-host-alive
notification_period 24x7
notification_interval 30
notification_options d,r
contact_groups admins
register 0 ; DONT REGISTER THIS - ITS A TEMPLATE
}
Notice that the linux-box template definition is inheriting default values from the generic-host template, which is
defined in the sample localhost.cfg file that gets installed when you follow the Nagios quickstart installation guide.
Next, define a new host for the remote Linux/Unix box that references the newly created linux-box host template.
define host{
use linux-box ; Inherit default values from a template
host_name remotehost ; The name we're giving to this server
alias Fedora Core 6 ; A longer name for the server
address 192.168.0.1 ; IP address of the server
}
Next, define some services for monitoring the remote Linux/Unix box. These example service definitions will use
the sample commands that have been defined in the nrpe.cfg file on the remote host.
The following service will monitor the CPU load on the remote host. The "check_load" argument that is passed to
the check_nrpe command definition tells the NRPE daemon to run the "check_load" command as defined in the
nrpe.cfg file.
define service{
use generic-service
host_name remotehost
service_description CPU Load
check_command check_nrpe!check_load
}
The following service will monitor the the number of currently logged in users on the remote host.
define service{
use generic-service
service_description Current Users
check_command check_nrpe!check_users
}
The following service will monitor the free drive space on /dev/hda1 on the remote host.
define service{
use generic-service
service_description /dev/hda1 Free Space
check_command check_nrpe!check_hda1
}

The following service will monitor the total number of processes on the remote host.
define service{
use generic-service
service_description Total Processes
check_command check_nrpe!check_total_procs
}
The following service will monitor the number of zombie processes on the remote host.
define service{
use generic-service
service_description Zombie Processes
check_command check_nrpe!check_zombie_procs
}
Those are the basic service definitions for monitoring the remote host. If you would like to add additional services
to be monitored, read the "Customizing Your Configuration" section starting on page 13.
v. Restart Nagios
At this point you've installed the check_nrpe plugin and addon host and service definitions for monitoring the
remote Linux/Unix machine. Now its time to make those changes live...
Verify your Nagios configuration files.
/usr/local/nagios/bin/nagios -v /usr/local/nagios/etc/nagios.cfg
If there are errors, fix them. If everything is fine, restart Nagios.
service nagios restart
That's it! You should see the host and service definitions you created in the Nagios web interface. In a few
minutes Nagios should have the current status information for the remote Linux/Unix machine.
Since you might want to monitor more services on the remote machine, I would suggest you read the next section
as well. :-)
Also, when it comes time to upgrade the version of NRPE you're running, its pretty easy to do. The initial
installation was the toughest, but upgrading is a snap.

4. CUSTOMIZING YOUR CONFIGURATION4. CUSTOMIZING YOUR CONFIGURATION
You'll might want to monitor more services on the remote Linux/Unix box than those that are described in this
documentation. This is easy to accomplish.
Anytime you want to monitor a new service on a remote host using the NRPE addon, you have to do two things:
1. Add a new command definition to the nrpe.cfg file on the remote host
2. Add a new service definition to your Nagios configuration on the monitoring host
Let's say you want to monitor the swap usage on the remote Linux/Unix host. Here are the steps you'd need to
follow...
a) Remote Host Configuration
You can use the check_swap plugin to monitor swap usage on the machine. Assuming you followed the
installation instructions in this document, the check_swap plugin should already be installed in
/usr/local/nagios/libexec.
Login as the nagios user on the remote host.
Run the check_swap plugin manually and tweak the command line options to specify the desired warning and
critical free swap space thresholds. Make sure the full command line returns the expected output you want from
the plugin. For this example, let's say you want a critical alert if swap free space is less than 10% and a warning if
free space is less than 20%. Here's the command line that would accomplish that:
/usr/local/nagios/libexec/check_swap -w 20% -c 10%
Now that you know the command line that should be execute, open the NRPE configuration file.
vi /usr/local/nagios/etc/nrpe.cfg
Add a new check_swap command definition that uses the command line from above and save the file.
command[check_swap]=/usr/local/nagios/libexec/check_swap -w 20% -c 10%
If you're running the NRPE daemon as a standalone daemon you'll need to restart it. If you're running it under the
inetd/xinetd superserver you don't need to do anything more.

b) Monitoring Host Configuration
On the monitoring host, you need to define a new service for monitoring the swap usage on the remote host. Add
the following entry to one of your object configuration files.
define service{
use generic-service
service_description Swap Usage
check_command check_nrpe!check_swap
}
Notice that the check commands is passing "check_swap" to the check_nrpe command definition. This will cause
the NRPE daemon to run the check_swap command that was defined in the nrpe.cfg file on the remote host in the
previous step.
Next, verify your Nagios configuration files and restart Nagios.
/usr/local/nagios/bin/nagios -v /usr/local/nagios/etc/nagios.cfg
service nagios restart
That's it! You are now monitoring a new service on the remote host using the NRPE addon.

5. UPGRADING5. UPGRADING
At some point in time you'll want to upgrade the version of the NRPE addon that you're running. The upgrade
process is fairly pain free. Here are the details...
a) Monitoring Host Upgrade
On the monitoring host (the machine that runs Nagios), you only have to upgrade the check_nrpe plugin. Here's
how...
Login as the nagios user and create a directory for storing the downloads.
mkdir ~/downloads
cd ~/downloads
cd nrpe-2.8
./configure
make all
Install the NRPE plugin.
make install-plugin
You're done on the monitoring server!
[ Continued on Next Page ]

b) Remote Host Upgrades
You'll need to upgrade the NRPE daemons on all remote hosts that are being monitored using the NRPE addon.
Here's how...
Login as the nagios user and create a directory for storing the downloads.
mkdir ~/downloads
cd ~/downloads
cd nrpe-2.8
./configure
make all
Install the NRPE daemon.
make install-daemon
If you're running the NRPE daemon as a standalone daemon, first kill the old daemon process and then start the
(new) daemon up again.
You're done with the upgrade on the remote host!

6. TROUBLESHOOTING6. TROUBLESHOOTING
Here are some tips for troubleshooting some of the more common errors with the NRPE addon. If you encounter
problems that aren't covered here, send an email to the nagios-users mailing list. More information on the mailing
lists can be found at: http://www.nagios.org/support/
The check_nrpe plugin returns "CHECK_NRPE: Socket timeout after 10 seconds" or "Connection refused
or timed out"
This error can indicate several things:
– The command that the NRPE daemon was asked to run took longer than 10 seconds to execute. This is the
most likely cause if the error message was "CHECK_NRPE: Socket timeout after 10 seconds". Use the -t
command line option to specify a longer timeout for the check_nrpe plugin. The following example will
increase the timeout to 30 seconds:
/usr/local/nagios/check_nrpe -H localhost -c somecommand -t 30
– The NRPE daemon is not installed or running on the remote host. Verify that the NRPE daemon is running as
a standalone daemon or under inetd/xinetd with one of the following commands:
ps axuw | grep nrpe
netstat -at | grep nrpe
– There is a firewall that is blocking the communication between the monitoring host (which runs the check_nrpe
plugin) and the remote host (which runs the NRPE daemon). Verify that the firewall rules (e.g. iptables) that
are running on the remote host allow for communication and make sure there isn't a physical firewall that is
located between the monitoring host and the remote host.
The check_nrpe plugin returns "CHECK_NRPE: Received 0 bytes from daemon. Check the remote server
logs for an error message."
First thing you should do is check the remote server logs for an error message. Seriously. :-) This error could be
due to the following problem:
– The check_nrpe plugin was unable to complete an SSL handshake with the NRPE daemon. An error
message in the logs should indicate whether or not this was the case. Check the versions of OpenSSL that
are installed on the monitoring host and remote host. If you're running a commercial version of SSL on the
remote host, there might be some compatibility problems.
The check_nrpe plugin returns "NRPE: Unable to read output"
This error indicates that the command that was run by the NRPE daemon did not return any character output.
This could be an indication of the following problems:
– An incorrectly defined command line in the command definition. Verify that the command definition in your
NRPE configuration file is correct.
– The plugin that is specified in the command line is malfunctioning. Run the command line manually to make
sure the plugin returns some kind of text output.

The check_nrpe plugin returns "NRPE: Command 'x' not defined"
This error means that you didn't define command x in the NRPE configuration file on the remote host. On the
remote host, add the command definition for x. See the existing command definitions in the NRPE configuration
file for more information on doing this. If you're running the NRPE daemon as a standalone daemon (and not
under inetd or xinetd), you'll need to restart it in order for the new command to be recognized.
The check_nrpe plugin returns "NRPE: Command timed out after x seconds"
This error indicates that the command that was run by the NRPE daemon did not finish executing within the
specified time. You can increase the timeout for commands by editing the NRPE configuration file and changing
the value of the command_timeout variable. If you're running the NRPE daemon as a standalone daemon (and
not under inetd or xinetd), you'll need to restart it in order for the new timeout to be recognized.
How to go about debugging other problems...
When debugging problems it may be useful to edit the NRPE configuration file and change the debug=0 entry to
debug=1. Once you do that, restart the NRPE daemon if it is running as a standalone daemon. After you try using
the check_nrpe plugin again, you should be able to see some debugging information in the log files of the remote
host. Check your logs carefully – they should be able to help provide clues as to where the problem lies...

Nrpe - Nagios Remote Plugin Executor. NRPE plugin for Nagios Core

More Related Content

What's hot (20)

Viewers also liked (9)

Similar to Nrpe - Nagios Remote Plugin Executor. NRPE plugin for Nagios Core (20)

More from Nagios (18)

Recently uploaded (20)

Nrpe - Nagios Remote Plugin Executor. NRPE plugin for Nagios Core