Ocean power

Ocean power

• 1.
  PHYSICS FA –2 ACTIVITY OCEAN THERMAL ENERGY CONVERSION
• 2.
  What is OTEC  OTEC, or Ocean Thermal Energy Conversion, is an energy technology that converts solar radiation to electric power.  OTEC systems use the ocean's natural thermal gradient—the fact that the ocean's layers of water have different temperatures—to drive a power-producing cycle.
• 3.
   OTEC usesthe ocean's warm surface water with a temperature of around 25°C (77°F) to vaporize a working fluid, which has a low-boiling point, such as ammonia. The vapor expands and spins a turbine coupled to a generator to produce electricity. The vapor is then cooled by seawater that has been pumped from the deeper ocean layer, where the temperature is about 5°C (41°F). That condenses the working fluid back into a liquid, so it can be reused. This is a continuous electricity generating cycle.  The efficiency of the cycle is strongly determined by the temperature differential. The bigger the temperature difference, the higher the efficiency. The technology is therefore viable primarily in equatorial areas where the year-round temperature differential is at least 20 degrees Celsius or 36 degrees Fahrenheit.
• 4.
   Half ofthe earths incoming solar energy is absorbed between the tropic of Capricorn and the Tropic of Cancer.
• 5.
   1881: JacquesArsene d'Arsonval, a French physicist, was the first to propose tapping the thermal energy of the ocean. Georges Claude, a student of d'Arsonval's, built an experimental open-cycle OTEC system at Matanzas Bay, Cuba, in 1930. The system produced 22 kilowatts (kW) of electricity by using a low-pressure turbine. In 1935, Claude constructed another open-cycle plant, this time aboard a 10,000-ton cargo vessel moored off the coast of Brazil. But both plants were destroyed by weather and waves, and Claude never achieved his goal of producing net power (the remainder after subtracting power needed to run the system) from an open-cycle OTEC system.  1956: French researchers designed a 3-megawatt (electric) (MWe) open-cycle plant for Abidjan on Africa's west coast. But the plant was never completed because of competition with inexpensive hydroelectric power.
• 6.
   1979: Thefirst 50-kilowatt ( (kWe) closed-cycle OTEC demonstration plant went up at NELHA.  Known as "Mini-OTEC," the plant was mounted on a converted U.S. Navy barge moored approximately 2 kilometers off Keahole Point. The plant used a cold-water pipe to produce 52 kWe of gross power and 15 kWe net power.
• 7.
   1993: Anopen-cycle OTEC plant at Keahole Point, Hawaii, produced 50,000 watts of electricity during a net power-producing experiment.  This broke the record of 40,000 watts set by a Japanese system in 1982.  Today, scientists are developing new, cost-effective, state-of-the-art turbines for open-cycle OTEC systems, experimenting with anti corroding Titanium and plastics as rotor material.  The new designs for OTEC are still mostly experimental. Only small-scale versions have been made. The largest so far is near Japan, and it can create 100 kilowatts of electricity.
• 8.
  OPEN-CYCLE  Open-cycleOTEC uses the tropical oceans' warm surface water to make electricity. When warm seawater is placed in a low-pressure container, it boils. The expanding steam drives a low-pressure turbine attached to an electrical generator. The steam, which has left its salt behind in the low-pressure container, is almost pure fresh water. It is condensed back into a liquid by exposure to cold temperatures from deep-ocean water.
• 10.
  CLOSED-CYCLE (RANKINE) Closed-cycle systems use fluid with a low-boiling point, such as ammonia, to rotate a turbine to generate electricity. Here's how it works. Warm surface seawater is pumped through a heat exchanger where the low-boiling-point fluid is vaporized. The expanding vapor turns the turbo-generator. Then, cold, deep seawater—pumped through a second heat exchanger—condenses the vapor back into a liquid, which is then recycled through the system.
• 11.
  CLOSED LOOP
• 12.
  HYBRID SYSTEM Hybridsystems combine the features of both the closed-cycle and open-cycle systems. In a hybrid system, warm seawater enters a vacuum chamber where it is flash-evaporated into steam, similar to the open-cycle evaporation process. The steam vaporizes a low-boiling-point fluid (in a closed-cycle loop) that drives a turbine to produces electricity.
• 13.
  ADVANTAGES  LowEnvironmental Impact  The distinctive feature of OTEC energy systems is that the end products include not only energy in the form of electricity, but several other synergistic products.  Fresh Water The first by-product is fresh water. A small 1 MW OTEC is capable of producing some 4,500 cubic meters of fresh water per day, enough to supply a population of 20,000 with fresh water.  Food A further by-product is nutrient rich cold water from the deep ocean. The cold "waste" water from the OTEC is utilised in two ways. Primarily the cold water is discharged into large contained ponds, near shore or on land, where the water can be used for multi-species mariculture (shellfish and shrimp) producing harvest yields which far surpass naturally occurring cold water upwelling zones, just like agriculture on land.
• 14.
  Minerals OTEC mayone day provide a means to mine ocean water for 57 trace elements. Most economic analyses have suggested that mining the ocean for dissolved substances would be unprofitable because so much energy is required to pump the large volume of water needed and because of the expense involved in separating the minerals from seawater. But with OTEC plants already pumping the water, the only remaining economic challenge is to reduce the cost of the extraction process.
• 15.
  Artists rendition ofa 400MW plant back in ‘75
• 16.
  OTEC POWER PLANT
• 17.
   The developmentof the Kalina Cycle which is significantly more efficient than the previous closed-cycle system based on straight ammonia.  The discovery that dissolved gases exchange more rapidly from seawater than from fresh water. This allows for more efficiency and lower costs for open-cycle OTEC and for fresh water production from seawater in a hybrid Kalina Cycle configuration as well as fresh water production in general.  The development of better heat exchangers and heat exchanger operation with respect to bio-fouling control (on the warm water side) and corrosion control.
• 18.
  THE FUTURE Records available from experimental plants demonstrate technical viability and provide invaluable data on the operation of OTEC plants. The economic evaluation of OTEC plants indicates that their commercial future lies in floating plants of approximately 100 MW capacity for industrialized nations and smaller plants for small-island- developing-states  Small OC-OTEC plants can be sized to produce from 1 MW to 10 MW of electricity, and at least 1700 m3 to 3500 m3 of desalinated water per day.