OUR CHANGING
EARTH
KICKSTARTER
TUTORIALS
STD VII
KICKSTARTER TUTORIALSKICKSTARTER TUTORIALS
CHANGES IN THE EARTH SURFACE
Mountains Volcano Mushroom Rock
Delta Sea Arches Sand Dunes
The changes on the Earth surface
is due to two types of forces.
1. ENDOGENIC (Endogenous) FORCE
2. EXOGENIC (Exogenous) FORCE
ENDOGENIC (Endogenous)
FORCES
It refers to the forces that occur beneath the
surface of the Earth.
• Deep inside the earth’s core, heat is generated.
• The heat is transferred upward to the mantle causing
it to slowly circulate.
• This movement of the lava applies force on the
lithospheric plates above. These plates keep shifting
and sliding at a very slow speed of a few mm in a year in
different directions. The movement of these plates is
called Tectonic Activity or Plate Tectonics.
ENDOGENIC (Endogenous) FORCE
ENDOGENIC (Endogenous) FORCE
Endogenic Force causes -
Earthquake, Tsunami, Volcano and
change in the earth’s landscape.
There are 20 lithospheric plates of different sizes.
These are commonly known as Tectonic plates.
The earth's crust is cracked and the pieces of the Earth's
crust formed by the cracks are called tectonic plates.
The plates are continually moving (albeit very slowly, a few
millimetres a year) and this movement helps to form
volcanoes.
These tectonic plates can be seen in this map.
An earthquake is a sudden tremor or movement of the
earth’s crust, which originates naturally at or below the
surface.
What causes earthquakes ?
Sudden movement of tectonic plates.
Earth surface is subjected to endogenic forces
occurring from beneath the earth’s surface. This
force makes the plates move at a very slow speed.
However a sudden movement of tectonic plates
triggers an earthquake.
Seismometer or Seismograph records earth movements.
1. EARTHQUAKE
KICKSTARTER TUTORIALS
Focus or Hypocentre
EARTHQUAKE – Focus & Epicentre
It is the point of origin of
the earthquake. Sudden
movement occur deep
below the crust or mantle
causing tectonic plates to
move vigorously.
Concentric shock waves
generated from this point
determines the extent of
damage caused.
(Since the Focus point is often
deep below the surface, it is
difficult to map.)
KICKSTARTER TUTORIALS
Epicentre
• It is the point on the earth surface which is
directly above the focus.
• It is most commonly used to describe the
point of concentration of an earthquake.
The strength and magnitude of an earthquake is
measured on the Richter Scale. An earthquake whose
measurement is above 7 on the Richter Scale can cause
major damages.
Earthquakes are now measured using the Moment
Magnitude Scale (or simply Magnitude scale). This
measures the size of the seismic waves during the
earthquake.
Tsunami
When the epicentre of earthquake
is in sea bed, it cause huge tidal
waves which could have
devastating effect on sea shores.
Such phenomenon is known as
Tsunami.
Tsunami
2. VOLCANO
A volcano is an
opening, or
rapture, in a
planet’s surface,
which allows
hot, molten rock,
ash and gases to
escape from
below the
surface.
Volcanoes are most commonly
found along plate boundaries.
Mountain ranges & trenches –
Slow movement of lithospheric plates causes
change on the earth’s surface. Collision of plates
3. Change on the earth’s surface
creates mountain
systems of earth
like the Himalayas
and huge
trenches on the
ocean floor.
KICKSTARTER TUTORIALS
SUMMARY
ENDOGENIC (Endogenous)
FORCE
1.It occurs beneath the
surface of the Earth.
2.It causes natural
devastation & physical
change in the earth’s
surface , like
earthquake, volcanoes &
formation of mountains
or valleys.
EXOGENIC (Exogenous)
FORCES
EXOGENIC (Exogenous) FORCES
It refers to the external phenomena
that occur on or above the earth’s
surface.
The main elements of exogenic forces are
–
AIR & WATER
Waterfall are often formed where a layer of harder
rock overlays a layer of softer rock.
WATERFALL
Harder rock
Softer rock
As the river passes over the softer rock, it is able to
erode it at a faster rate, forming a step in the river
bed.
WATERFALL
Harder rock
Softer rock
The force of hydraulic action does two things:
Further erosion makes the plunge pool and notch
bigger over time.
WATERFALL
Harder rock
Softer rock
As the notch grows, eventually there isn’t enough
support under the harder rock and so it collapses
into the plunge pool.
WATERFALL
Harder rock
Softer rock
WATERFALL
The processes of erosion continue, further eroding
out the notch and plunge pool. Eventually the
harder rock above will collapse again, meaning that
the waterfall will retreat upstream over time.
As it retreats,
it leaves
behind a
steep sided
gorge.
Why do river curves
• Rivers cause change on the surface over
which it flows.
RIVER
> Meanders – It is a
snaking pattern of
water stream formed
by alternatively
eroding sediments
from the outside of a
bend and depositing
them on the inside.
> Ox-bow lake –
An oxbow lake is a U-shaped
body of water that forms
when a wide meander from
the main stem of a river is cut
off, creating a free-standing
body of water.
This landform is so named for
its distinctive curved shape,
resembling the bow pin of
an oxbow.
bow pin of an oxbow
Floodplain – A floodplain is a generally flat area of
land next to a river or stream. It stretches from the
banks of the river to the outer edges of the valley.
Flood plains are natural flooding outlets for rivers.
Agriculture remains a critical industry for flood plains
today. The silty sediment is rich in nutrients that support
plant growth. (This farmer is harvesting on the fertile
flood plain of the Omo River in Ethiopia)
As it takes more energy
to carry large particles,
these are deposited first
and therefore build up
along the banks of the
river to form a natural
embankment which are
called levees. The levee
will become higher
every time the river
floods.
> Levees - In times of flood a river may overflow its banks
and spread over the flood plain. As it does so it loses
energy and deposits its material across the flood plain.
Levees
Delta
Deltas are formed at the mouth of a river where the river
flows into the ocean or other water body. When a river
carrying sediments reaches a body of standing water,
it reduces its velocity
causing it to deposits the
sediments at the mouth.
Over time these sediments
builds up to rise above the
surface of water. The river
then cuts across the land
and forms different
branches. These branches
are called distributaries.
Bay of Bengal Delta
EXOGENIC (Exogenous) FORCES
 Sea caves – continuous wave action of
the sea erodes the rocky faces on the sea
shore to form caves.
 Sea arches – over a period of time a sea
cave convert into sea arch with increased
erosion in the rock.
 Stack – Stacks are formed when part of a
main landform is eroded by water action,
like water crashing against the rock.
 Sea Beaches – Sea waves leave behind
sediments in the form of fine sand at these
places are called beaches.
Sea waves also create various changes in landforms.
GLACIER
• Glacier are
accumulation of snow
that are formed in areas
where the amount of
snow that falls exceeds
the amount that melts.
• Glacier form distinct
landforms that looks like
frozen river moving
slowly over some land
surface or down a valley.
Glacial Moraines
Moraine is
sediment
deposited
by a glacier.
Wind flowing over a long period create
different forms.
AIR (WIND)
Mushroom Rocks –
Usually found in deserts
areas. The wind blowing at
high speed takes with it sand
particles. The particles being
heavier remain close to the
surface and as wind passes
along the rocks the sand
particles erodes the portion
of rock closer to the surface
without affecting the upper
portion. This gives the rocks
a mushroom like shape.
Wind can create landforms when it
deposits its sediments, especially in
deserts and along coasts.
Sand dunes & Loess
are landscape features deposited by wind.
Sand Dunes –
A dune is a mound of sand
formed by the wind,
usually along the beach or
in a desert. Dunes
form when wind
blows sand into a
sheltered area behind an
obstacle. Dunes grow as
grains of sand accumulate.
Every dune has a
windward side and a
slipface.
Loess –
It is a sedimentary deposit
of mineral particles which
are finer than sand but
coarser than dust or clay,
deposited by the wind.
Loess is a type of silt which
forms fertile topsoil in some
parts of the world. Loess
deposits are usually a few
meters thick. The soil has
few clay particles to hold it
together.
EXOGENIC (Exogenous)
FORCE
1.It occurs above the
surface of the Earth.
2.It causes physical
change in the earth’s
surface , like Sea
arches, mushroom
rock, sea shore,
sand dunes, etc.
ENDOGENIC (Endogenous)
FORCE
1.It occurs beneath the
surface of the Earth.
2.It causes natural
devastation & physical
change in the earth’s
surface , like
earthquake, volcanoes
& formation of
mountains or valleys.
Question & Answer
1. What cause Tsunami ?
2. List two causes of earthquakes.
3. What is volcano?
4. What are exogenic forces?
5. Where and where is ox-bow lake formed?
6. How are sea arches formed?
7. How are sand dunes formed?
Give Reason.
1. Formation of Mushroom rocks in deserts.
2. Earth surface is not a consistent state.
Answer the following in detail.
1. How is delta formed? Draw a neat and labelled diagram of delta.
2. Explain the depositional work of glacier.
3. Explain the erosional and depositional work of wind.
4. How are sea caves and arches formed?
1. What cause Tsunami ?
A tsunami is a large ocean wave that is caused by sudden
motion on the ocean floor. This sudden motion could be an
earthquake, a powerful volcanic eruption, or an underwater
landslide.
2. List two causes of earthquakes.
An Earthquake is a sudden tremor or movement of the earth's
crust, which originates naturally at or below the surface.
There are two main causes of earthquakes.
1. They can be linked to explosive volcanic eruptions; they are
in fact very common in areas of volcanic activity where they
either proceed or accompany eruptions.
2. They can be triggered by Tectonic activity associated with
plate margins and faults. The majority of earthquakes world
wide are of this type.
Question & Answer
3. What is volcano?
4. What are exogenic forces?
5. Where and where is ox-bow lake formed?
This is formed when a wide meander from the main stem of a
river is cut off to create a lake. This is called ox-bow lake for its
distinctive curved shape that results from this process.
6. How are sea arches formed?
This is formed by the process of erosion
7. How are sand dunes formed?
A dune is a mound of sand formed by the wind, usually along
the beach or in a desert. Dunes form when wind
blows sand into a sheltered area behind an obstacle.
Dunes grow as sediments of sand accumulate.
Question & Answer
Answer the following in detail.
1. How is delta formed? Draw a neat and labelled diagram of
delta.
Deltas are formed at the mouth of a river where the river
flows into the ocean or other water body. When a river
carrying sediments reaches a body of standing water, it
reduces its velocity causing it to deposits the sediments at the
mouth. Over time these sediments builds up to rise above the
surface of water. The river then cuts across the land and forms
different branches. These branches are called distributaries.
2. Explain the depositional work of glacier.
Like flowing water, flowing ice carry and deposits the rocks
and sediments. Rock and sediments freeze and stick to the
bottom of the glacier and get carried away by the flowing ice.
Glaciers deposit their sediment when they melt.
Question & Answer
Home Work
1. Explain the erosional and depositional work of wind.
2. Earth surface is not a consistent state. Explain
Give Reason.
1. Formation of Mushroom rocks in deserts.
2. Agriculture remains a critical industry for flood plains today.
Home Work
THANK YOU
KICKSTARTER TUTORIALS
46B, Jaydurga Nagar, Bomikhal, Bhubaneswar, Odisha.
Contact: 9438394565 / 7504193557

Our Changing Earth (Grade 7)

  • 1.
  • 2.
  • 3.
    CHANGES IN THEEARTH SURFACE Mountains Volcano Mushroom Rock Delta Sea Arches Sand Dunes
  • 4.
    The changes onthe Earth surface is due to two types of forces. 1. ENDOGENIC (Endogenous) FORCE 2. EXOGENIC (Exogenous) FORCE
  • 5.
  • 6.
    It refers tothe forces that occur beneath the surface of the Earth. • Deep inside the earth’s core, heat is generated. • The heat is transferred upward to the mantle causing it to slowly circulate. • This movement of the lava applies force on the lithospheric plates above. These plates keep shifting and sliding at a very slow speed of a few mm in a year in different directions. The movement of these plates is called Tectonic Activity or Plate Tectonics. ENDOGENIC (Endogenous) FORCE
  • 7.
    ENDOGENIC (Endogenous) FORCE EndogenicForce causes - Earthquake, Tsunami, Volcano and change in the earth’s landscape. There are 20 lithospheric plates of different sizes. These are commonly known as Tectonic plates.
  • 8.
    The earth's crustis cracked and the pieces of the Earth's crust formed by the cracks are called tectonic plates. The plates are continually moving (albeit very slowly, a few millimetres a year) and this movement helps to form volcanoes. These tectonic plates can be seen in this map.
  • 9.
    An earthquake isa sudden tremor or movement of the earth’s crust, which originates naturally at or below the surface. What causes earthquakes ? Sudden movement of tectonic plates. Earth surface is subjected to endogenic forces occurring from beneath the earth’s surface. This force makes the plates move at a very slow speed. However a sudden movement of tectonic plates triggers an earthquake. Seismometer or Seismograph records earth movements. 1. EARTHQUAKE
  • 10.
    KICKSTARTER TUTORIALS Focus orHypocentre EARTHQUAKE – Focus & Epicentre It is the point of origin of the earthquake. Sudden movement occur deep below the crust or mantle causing tectonic plates to move vigorously. Concentric shock waves generated from this point determines the extent of damage caused. (Since the Focus point is often deep below the surface, it is difficult to map.)
  • 11.
    KICKSTARTER TUTORIALS Epicentre • Itis the point on the earth surface which is directly above the focus. • It is most commonly used to describe the point of concentration of an earthquake. The strength and magnitude of an earthquake is measured on the Richter Scale. An earthquake whose measurement is above 7 on the Richter Scale can cause major damages. Earthquakes are now measured using the Moment Magnitude Scale (or simply Magnitude scale). This measures the size of the seismic waves during the earthquake.
  • 12.
    Tsunami When the epicentreof earthquake is in sea bed, it cause huge tidal waves which could have devastating effect on sea shores. Such phenomenon is known as Tsunami.
  • 13.
  • 14.
    2. VOLCANO A volcanois an opening, or rapture, in a planet’s surface, which allows hot, molten rock, ash and gases to escape from below the surface. Volcanoes are most commonly found along plate boundaries.
  • 15.
    Mountain ranges &trenches – Slow movement of lithospheric plates causes change on the earth’s surface. Collision of plates 3. Change on the earth’s surface creates mountain systems of earth like the Himalayas and huge trenches on the ocean floor.
  • 16.
  • 17.
    SUMMARY ENDOGENIC (Endogenous) FORCE 1.It occursbeneath the surface of the Earth. 2.It causes natural devastation & physical change in the earth’s surface , like earthquake, volcanoes & formation of mountains or valleys.
  • 18.
  • 19.
    EXOGENIC (Exogenous) FORCES Itrefers to the external phenomena that occur on or above the earth’s surface. The main elements of exogenic forces are – AIR & WATER
  • 20.
    Waterfall are oftenformed where a layer of harder rock overlays a layer of softer rock. WATERFALL Harder rock Softer rock
  • 21.
    As the riverpasses over the softer rock, it is able to erode it at a faster rate, forming a step in the river bed. WATERFALL Harder rock Softer rock
  • 22.
    The force ofhydraulic action does two things: Further erosion makes the plunge pool and notch bigger over time. WATERFALL Harder rock Softer rock
  • 23.
    As the notchgrows, eventually there isn’t enough support under the harder rock and so it collapses into the plunge pool. WATERFALL Harder rock Softer rock
  • 24.
    WATERFALL The processes oferosion continue, further eroding out the notch and plunge pool. Eventually the harder rock above will collapse again, meaning that the waterfall will retreat upstream over time. As it retreats, it leaves behind a steep sided gorge.
  • 25.
  • 26.
    • Rivers causechange on the surface over which it flows. RIVER > Meanders – It is a snaking pattern of water stream formed by alternatively eroding sediments from the outside of a bend and depositing them on the inside.
  • 27.
    > Ox-bow lake– An oxbow lake is a U-shaped body of water that forms when a wide meander from the main stem of a river is cut off, creating a free-standing body of water. This landform is so named for its distinctive curved shape, resembling the bow pin of an oxbow. bow pin of an oxbow
  • 28.
    Floodplain – Afloodplain is a generally flat area of land next to a river or stream. It stretches from the banks of the river to the outer edges of the valley. Flood plains are natural flooding outlets for rivers.
  • 29.
    Agriculture remains acritical industry for flood plains today. The silty sediment is rich in nutrients that support plant growth. (This farmer is harvesting on the fertile flood plain of the Omo River in Ethiopia)
  • 30.
    As it takesmore energy to carry large particles, these are deposited first and therefore build up along the banks of the river to form a natural embankment which are called levees. The levee will become higher every time the river floods. > Levees - In times of flood a river may overflow its banks and spread over the flood plain. As it does so it loses energy and deposits its material across the flood plain.
  • 31.
  • 32.
    Delta Deltas are formedat the mouth of a river where the river flows into the ocean or other water body. When a river carrying sediments reaches a body of standing water, it reduces its velocity causing it to deposits the sediments at the mouth. Over time these sediments builds up to rise above the surface of water. The river then cuts across the land and forms different branches. These branches are called distributaries.
  • 33.
  • 34.
    EXOGENIC (Exogenous) FORCES Sea caves – continuous wave action of the sea erodes the rocky faces on the sea shore to form caves.  Sea arches – over a period of time a sea cave convert into sea arch with increased erosion in the rock.  Stack – Stacks are formed when part of a main landform is eroded by water action, like water crashing against the rock.  Sea Beaches – Sea waves leave behind sediments in the form of fine sand at these places are called beaches. Sea waves also create various changes in landforms.
  • 35.
    GLACIER • Glacier are accumulationof snow that are formed in areas where the amount of snow that falls exceeds the amount that melts. • Glacier form distinct landforms that looks like frozen river moving slowly over some land surface or down a valley.
  • 36.
  • 37.
    Wind flowing overa long period create different forms. AIR (WIND)
  • 38.
    Mushroom Rocks – Usuallyfound in deserts areas. The wind blowing at high speed takes with it sand particles. The particles being heavier remain close to the surface and as wind passes along the rocks the sand particles erodes the portion of rock closer to the surface without affecting the upper portion. This gives the rocks a mushroom like shape.
  • 39.
    Wind can createlandforms when it deposits its sediments, especially in deserts and along coasts. Sand dunes & Loess are landscape features deposited by wind.
  • 40.
    Sand Dunes – Adune is a mound of sand formed by the wind, usually along the beach or in a desert. Dunes form when wind blows sand into a sheltered area behind an obstacle. Dunes grow as grains of sand accumulate. Every dune has a windward side and a slipface.
  • 41.
    Loess – It isa sedimentary deposit of mineral particles which are finer than sand but coarser than dust or clay, deposited by the wind. Loess is a type of silt which forms fertile topsoil in some parts of the world. Loess deposits are usually a few meters thick. The soil has few clay particles to hold it together.
  • 42.
    EXOGENIC (Exogenous) FORCE 1.It occursabove the surface of the Earth. 2.It causes physical change in the earth’s surface , like Sea arches, mushroom rock, sea shore, sand dunes, etc. ENDOGENIC (Endogenous) FORCE 1.It occurs beneath the surface of the Earth. 2.It causes natural devastation & physical change in the earth’s surface , like earthquake, volcanoes & formation of mountains or valleys.
  • 43.
    Question & Answer 1.What cause Tsunami ? 2. List two causes of earthquakes. 3. What is volcano? 4. What are exogenic forces? 5. Where and where is ox-bow lake formed? 6. How are sea arches formed? 7. How are sand dunes formed? Give Reason. 1. Formation of Mushroom rocks in deserts. 2. Earth surface is not a consistent state. Answer the following in detail. 1. How is delta formed? Draw a neat and labelled diagram of delta. 2. Explain the depositional work of glacier. 3. Explain the erosional and depositional work of wind. 4. How are sea caves and arches formed?
  • 44.
    1. What causeTsunami ? A tsunami is a large ocean wave that is caused by sudden motion on the ocean floor. This sudden motion could be an earthquake, a powerful volcanic eruption, or an underwater landslide. 2. List two causes of earthquakes. An Earthquake is a sudden tremor or movement of the earth's crust, which originates naturally at or below the surface. There are two main causes of earthquakes. 1. They can be linked to explosive volcanic eruptions; they are in fact very common in areas of volcanic activity where they either proceed or accompany eruptions. 2. They can be triggered by Tectonic activity associated with plate margins and faults. The majority of earthquakes world wide are of this type. Question & Answer
  • 45.
    3. What isvolcano? 4. What are exogenic forces? 5. Where and where is ox-bow lake formed? This is formed when a wide meander from the main stem of a river is cut off to create a lake. This is called ox-bow lake for its distinctive curved shape that results from this process. 6. How are sea arches formed? This is formed by the process of erosion 7. How are sand dunes formed? A dune is a mound of sand formed by the wind, usually along the beach or in a desert. Dunes form when wind blows sand into a sheltered area behind an obstacle. Dunes grow as sediments of sand accumulate. Question & Answer
  • 46.
    Answer the followingin detail. 1. How is delta formed? Draw a neat and labelled diagram of delta. Deltas are formed at the mouth of a river where the river flows into the ocean or other water body. When a river carrying sediments reaches a body of standing water, it reduces its velocity causing it to deposits the sediments at the mouth. Over time these sediments builds up to rise above the surface of water. The river then cuts across the land and forms different branches. These branches are called distributaries. 2. Explain the depositional work of glacier. Like flowing water, flowing ice carry and deposits the rocks and sediments. Rock and sediments freeze and stick to the bottom of the glacier and get carried away by the flowing ice. Glaciers deposit their sediment when they melt. Question & Answer
  • 47.
    Home Work 1. Explainthe erosional and depositional work of wind. 2. Earth surface is not a consistent state. Explain
  • 48.
    Give Reason. 1. Formationof Mushroom rocks in deserts. 2. Agriculture remains a critical industry for flood plains today. Home Work
  • 49.
    THANK YOU KICKSTARTER TUTORIALS 46B,Jaydurga Nagar, Bomikhal, Bhubaneswar, Odisha. Contact: 9438394565 / 7504193557