Downloaded 76 times
More Related Content
Partition wall
- 1.
- 2. PARTITION WALL • PARITIONWALL IS DEFINES AS A WALL OR DIVISION MADE UP OF CERTAIN MATERIAL THAT ARE PROVIDED FOR THE PURPOSE OF DIVIDING ONE ROOM OR PORTION OF A ROOM FROM ANOTHER • PARITION WALLS ARE DESGINED AS NON LOAD BEARING WALLA. IT MAY BE OF FOLDING, COLLAPSIBLE OR FIXED TYPE. • PARTITION WALL COULD BE MOVABLE. COLLAPSIBLE OR FIXED.
- 3. REQUIREMENT • 1- THININ CROSS SECTION SO THAT MAXIMUM FLOOR AREA CAN BE UTLISED. • 2- CONSTRUCTED FROM LIGHT, UNIFORM, HOMOGENOUS, DURABLE AND SOUND INSULATED MATERIAL. • 3-SIMPLE IN NATURE, EASY AND ECONOMICAL IN CONSTRUCTION HAVING PROPER COHERENCE WITH THE TYPE OF BUILDING. • 4- OFFER REISITANCE AGAINST FIRE, HEAT, DAMPNESS, TERMITES AND FUNGUS. • 5- RIGID ENOUGH TO TAKE THE VIBRATION CAUSED DUE TO LOADS. • 6- STRONG ENOUGH TO SUPPORT SANTIARY FITTING AND HEAVY FIXTURES. ADVANTAGES • 1-DIVIDE THE AREA INTO NUMBER OF ROOMS • 2- PROVIDE PRIVACY TO THE INMATES FROM SIGHT AND SOUND • 3-MADE UP OF LIGHT MATERIAL • 4-OCCUPY LESSEAR AREA • 5- EAISLY CONSTRUCTED
- 4. MOVABLE PARTITION SLIDING SLIDINGAND FOLDING SCREEN
- 5. TYPES OF PARTITION BRICKPARTITION • CONSTRUCTED WITH PLAIN BRICKS, REINFORCED BRICKS, BRICKS- NOGGED OR HOLLOW BRICKS. • PLAIN BRICKS PARTITION ARE DONE WITH HALF BRICK THICKNESS GENERALLY STRECHTER BOND. • REFORCEMENT BRICK PARTITION ARE PROVIED WITH REINFORCEMENT OF WIRE MESH OR HOOP IRON OR STEEL BARES IN HALF BRICK THICKNESS WALL. • BRICK NOGGING PARITION WALL CONSISTS OF BRICKWORK BUILT UP WITHIN A FRAMEWROK OF WOODEN MEMBERS. • THESE ARE FIRE RESISTANCE AND SOUND PROOF. HOLLOW BLOCK AND CLAY BLOCK • HOLLOW BLOCK PARTITION ARE BUILT OF INDIVIDUAL UNITS OF CONCRETE. • -CLAY BLOCKS USED OF TERRA COTTA OR CLAY AND EITHER USED AS SOLID OR HOLLOW. • SECTION 30*20 CM WITH THICKNESS 5 TO 15 CM.
- 6. WOODEN PARTITION • LIGHTIN WEIGHT. • THESE ARE NOT FIRE PROOF AND NOT SUITABLE FOR DAMP LOCATION AND NOT SOUND PROOF. STRAWBOARD PARTITION • USED WHERE REMOVAL OF PARTITION IS FREQUENT. • MADE OF COMPRESSED STAW COVERED THICK PAPER OR HARDBOARD. • HEAT AND SOUND PROOF, ECONOMICAL & RECYCLABLE
- 7. GLASS PARTITION • MADEOF SHEETS OR HOLLOW GLASS • GOOD AESTHETICS AND LIGHT. • DAMP AND SOUND PRROF. • EASY TO CLEAN AND MAINTAIN. • SHEETS OF GLASS ARE FIXED IN FRAME OF WOOD OR MEATL. GLASS BLOCKS ARE ALSO USED. METAL PARTITION • LIGHT WEIGHT, FIREPROOF AND STRONG • EASY TO CONSTRUCT AND SHIFT. • INSULATED MATERIAL IS FLIIED INTO HOLLOW SPACES.
- 8. CONCRETE PARTITION • THESEARE EITHER PRECAST OR CAST IN SITU. • SPECIAL CONCRETE POSTS ARE USED FOR THE CONSTRUCTION OF PRECAST CONCRETE PARTITION WALLS. PLASTER SLAB PARTITION • MADE OF BURNT GYPSUM OR PLASTER OF PARIS. • 5 - 10 CM THICK SLABS. • NAILS AND SCREWS CAN BE DRIVEN INTO SLABS.
- 9. MARKET SURVEY KreativeArts Gyproc Next G Furniture V.K. Sharma & Co.
- 10. WOODEN PARTITION WALL WOODENPARTITION Brand- Gyproc Price- 1,930/ sqm Application- Office Color- Brown Surface Finish- Paint coated Height- 3.6m WOODEN SLIDING FOLDING PARTITION Brand- Next G Furniture Price- 5910/sqm WOODEN PARTITION SCREEN Brand- Next G Furniture Price- 3,999/piece WOODEN PARTITION Brand- V.K. Sharma & Co. Price- 2,690/sqm Appearance- Modern Surface Finish-Polished Thickness- 5- 10 mm
- 11. ALUMINIUM PARTITION WALL FOLDINGPARTITIONS Brand- V. K. Sharma & Co. Price- 5,910/ sqm Material- Glass and Aluminum Height- 2.1m- 2.4m Type- Folding ALUMINIUM PARTITION LINEARR MODULAR OFFICE WORKSTATION Brand- Trends Price- Rs. 15,500/ piece Material- Aluminum Thickness- 60mm ALUMINIUM WALL PARTITION Brand- V. K. Sharma & Co. Price- 1,610/ sqm frame Color- White Surface treatment- PVDF Coated Material- Aluminum acoustic Application- Acoustic ALUMINUM GLASS PARTITION Brand- V. K. Sharma & Co. Price- 1,610/ sqm Location- Indoor Material- Aluminum
- 12. STAINLESS STEEL PARTITIONWALL METAL PARTITION JALI WITH LOTUS DESIGN CUTTING Brand- Kreative Arts Price- 22,600/sqm Color- Antique Brass location- Living Room Manufacturing Technique- Hand crafted ROOM PARTITION IN BRASS WITH LEAF DESIGN Brand- Kreative arts Price- 2.75 lakh/ piece Color- Antique brass Location- Indoor Manufacturing Technique- Casting and welding STAINLESS STEEL ROOM PARTITION Brand- Kreative arts Price- 30,600/sqm Color- Silver, Rose gold, copper, brass Manufacturing Technique- Laser cutting and welding STAINLESS STEEL PARTITION Brand- Dharam Industries Price- 16,100/sqm
- 13. GYPSUM/ DRYWALL/ UPVCPARTITION GYPSUM PARTITION Brand- Super Interior Price- 1070/ sqm Color- White Thickness- 12mm Insulation- Acoustic GYPSUM BOARD PARTITION Brand- Gyproc Price- 750/ sqm Application- Home, Office Color- White Finish- Matte Material- Gypsum Thickness- 7- 15mm Height- 1.8m DRYWALL PARTIONING SYSTEM Brand- V.K. Sharma & Co. Price- 1,610/ sqm Use- House, Shop POLYEX BROWN PVC PARTITION Brand- Polyex Price- 1,100/ sqm Color- Brown Thickness- 15- 18mm Built type- Modular Application- Home, Office
- 14. INTERNATIONAL MARKET SURVEY INLOOK PARTITION WALL SYSTEMS
- 15. GLASS WALL • ITCREATES A CONTINUOUS AND TRANSPARENT SURFACE • 4 MM GAP BETWEEN GLASS PANELS WHICH IS SEALED WITH SILICONE OR SEALING STRIP • GLASS CAN BE DECALED, SCREEN PRINTED, SANDBLASTED, ELECTRICALLY DIMMING, CURVED, COLOURED OR DIGITAL PRINTED. • PREMISES: OFFICE AND BUSINESS PREMISES • WALL THICKNESS: 102 MM • GLASS PANEL WIDTH: 100-1500 MM • MAXIMUM HEIGHT: 3000 MM • STANDARD GLASS: 8 MM, 10 MM OR 12 MM TEMPERED OR LAMINATED • PROFILES: ALUMINIUM; POWDER COATED IN RAL COLOURS OR ANODIZED • SILICONE SEAL: CLEAR, GREY, BLACK OR OTHER COLOUR • SEALING STRIP: TRANSPARENT STRIP OR RAL COLOURED ALUMINIUM PROFILE • SOUND INSULATION SILICONE SEALED CORNER SILICONE SEALED GAP AND SCREEN PRINTED PATTERN STAINLESS BRUSHED STEEL DOOR PULL OFFICE CAMPUS, KUOPIO
- 16. DOUBLE-GLAZED SOUND INSULATINGGLASS WALL • TWO GLASS PANELS WITH DIFFERENT THICKNESSES AND AIR GAP BETWEEN THEM. • VERTICAL GAP BETWEEN TWO GLASS PANELS CAN BE SEALED WITH SILICONE OR A SEALING STRIP. • SPECIAL SOUND INSULATING WOODEN HINGED DOOR CAN BE PROVIDED WITH THE GLASS WALL. • PREMISES: CONFERENCE ROOMS, LIBRARIES AND OTHER PREMISES THAT REQUIRE GOOD SOUND INSULATION • WALL THICKNESS: 100 MM • GLASS PANEL WIDTH: 100-1500 MM • MAXIMUM HEIGHT: 3000 MM • STANDARD GLASS: 66.2 + 55.2, LAMINATED GLASS WITH NORMAL OR SOUND CONTROL INTERLAYER, 55.2 + 44.2, LAMINATED GLASS WITH NORMAL OR SOUND CONTROL INTERLAYER, 8 MM + 10 MM TEMPERED GLASS • PROFILES: ALUMINIUM; POWDER COATED IN RAL COLOURS OR ANODIZED; SPECIAL COLOURS ALSO AVAILABLE • SILICONE SEAL: GREY, BLACK, CLEAR OR ANOTHER COLOUR • SEALING STRIP: TRANSPARENT STRIP • SOUND INSULATION: RW 43 DB, 66.2 + 55.2 + SPECIAL HINGED DOOR INLOOK OFFICE, HELSINKI TOP CORNER TRANSPARENT SEALING STRIP
- 17. SLIDING GLASS WALL •LIGHT AND STYLISH GLASS WALL WITH ALUMINIUM FRAME. • CONSIST OF FIXED GLASS PANELS AND SLIDING DOORS. • THE GLASS CAN BE DECALED, SCREEN PRINTED, SANDBLASTED, ELECTRICALLY DIMMING, COLOURED OR DIGITAL PRINTED. • PREMISES: OFFICE AND BUSINESS PREMISES • WALL THICKNESS: 102 MM • GLASS PANEL WIDTH: 100-1500 MM • MAXIMUM HEIGHT: 3000 MM • STANDARD GLASS: 6 MM OR 8 MM TEMPERED OR LAMINATED GLASS; THE GLASS MAY ALSO BE BOTH LAMINATED AND TEMPERED • PROFILES: ALUMINIUM; POWDER COATED IN RAL COLOURS OR ANODIZED; SPECIAL COLOURS ALSO AVAILABLE PORT CENTER, TURKU ABLOY OF433 LOCK ABLOY LC306 LOCK CASE INLOOK 20/300 STAINLESS BRUSHED STEEL DOOR PULL INLOOK L-150 DOOR PULL SLIDING DOOR THRESHOLD
- 18. SOUND INSULATING SLIDINGGLASS WALL • SLIDING GLASS WALL FOR PREMISES WITH SOUND INSULATION REQUIREMENTS. • PREMISES: OFFICE AND BUSINESS PREMISES • WALL THICKNESS: 102 MM • GLASS PANEL WIDTH: 100-1500 MM • MAXIMUM HEIGHT: 3000 MM • STANDARD GLASS: 44.2, LAMINATED GLASS WITH SOUND CONTROL INTERLAYER • PROFILES: ALUMINIUM; POWDER COATED IN RAL COLOURS OR ANODIZED; SPECIAL COLOURS ALSO AVAILABLE • SEALING: DB BRUSH SEALS – GREY; DB SLIDING DOOR SEAL – BLACK; RUBBER GLASS SEALS – BLACK • SOUND INSULATION: SOUND CLASS 25 DB (RW 30 DB); WIDE THRESHOLD FOR SLIDING DOOR SVENSKA LITTERATURSÄLLSKAPET I FINLAND, HELSINKI
- 19. LIGHT REMOVABLE GLASSWALL • GLASS WALL PANELS CAN TEMPORARILY BE STORED ASIDE. • PREMISES: OFFICES, RESTAURANTS AND HOTELS • MAXIMUM HEIGHT: 2600 MM • MAXIMUM PANEL WIDTH: 950 MM • MAXIMUM PANEL WEIGHT: 60 KG • MAXIMUM NUMBER OF PANELS: 9 GLASS PANELS / WALL • GLASS: 8 MM OR 10 MM TEMPERED GLASS • PROFILES: ALUMINIUM; ANODIZED; STAINLESS STEEL SURFACE OF PAINTED IN A RAL COLOUR; TOP TRACK ALWAYS NATURAL ANODIZED BOTTOM GUIDE TRACK
- 20. REMOVABLE GLASS WALLFOR SHOPPING CENTERS AND PUBLIC PREMISES • MODIFIABLE GLASS WALL WITH PANELS WHICH CAN TEMPORARILY BE STORED ASIDE. • THE GLASS WALL CAN BE STRAIGHT OR CURVED, CORNER SOLUTIONS ARE ALSO AVAILABLE. • SLIDING HINGED DOOR PANELS CAN BE USED WITH THE SYSTEM. • PREMISES: PUBLIC PREMISES, SHOPPING CENTER • MAXIMUM HEIGHT: 3500 MM; 3000 MM WITH SLIDING HINGED PANELS, • MAXIMUM PANEL WIDTH: 1500 MM; 1100 MM WITH SLIDING HINGED PANELS, • MAXIMUM PANEL WEIGHT: 150 KG • GLASS: 10 MM OR 12 MM TEMPERED OR LAMINATED GLASS
- 21. WOOD FRAMED GLASSWALL • FRAME CAN BE PAINTED OR VENEERED. • THE GLASS CAN BE DECALED, SCREEN PRINTED, DIGITAL PRINTED OR SANDBLASTED. • SLIDING OR HINGED DOORS AND ELECTRICAL MODULES CAN BE USED WITH THE SYSTEM. • PREMISES: OFFICES, CONFERENCE ROOMS AND PUBLIC PREMISES • WALL THICKNESS: 92 MM OR OTHER THICKNESS • GLASS PANEL WIDTH: 100-1500 MM • MAXIMUM HEIGHT: 3000 MM • STANDARD GLASS: 6 MM, 8 MM AND 12 MM TEMPERED OR LAMINATED GLASS • PROFILES: PAINTED WOOD (TIKKURILA SYMPHONY, NCS OR RAL COLOURS), OR VENEER WITH VARIOUS SURFACE TREATMENTS • DOORS: HINGED DOORS; REBATED OR NON-REBATED; NORMAL OR L-FRAME • SOUND INSULATION: TECHNOPOLIS INNOVA 4, JYVÄSKYLÄ GLASS DOOR NON-REBATED DOOR
- 22. WOOD FRAMED GLASSWALL WITH ALUMINIUM GLAZING PROFILES • THE GLASS CAN BE DECALED, SCREEN PRINTED, DIGITAL PRINTED OR SANDBLASTED. • SLIDING OR HINGED DOORS AND ELECTRICAL MODULES CAN BE USED WITH THE SYSTEM. • PREMISES: OFFICES, CONFERENCE ROOMS AND PUBLIC PREMISES • WALL THICKNESS: 92 MM OR OTHER THICKNESS • GLASS PANEL WIDTH: 100-1500 MM • MAXIMUM HEIGHT: 3000 MM • STANDARD GLASS: 6 MM, 8 MM AND 12 MM TEMPERED OR LAMINATED GLASS; • PROFILES: PAINTED WOOD (TIKKURILA SYMPHONY, NCS OR RAL COLOURS), OR VENEER WITH VARIOUS SURFACE TREATMENTS; ALUMINIUM GLAZING PROFILE POWDER COATED IN RAL COLOURS • DOORS: HINGED DOORS; REBATED OR NON-REBATED; NORMAL OR L-FRAME • SOUND INSULATION: ALUMINIUM GLAZING PROFILES MOTONET OFFICE, TURKU
- 23. INLOOK PHONE BOOTH •GLASS DOOR AND WALLS; GLASS CAN BE DECALED • SOUND INSULATION 30 DB • EXHAUST FAN AND LIGHT WITH MOTION SENSOR • STANDARD DIMENSIONS: • WIDTH: 1050 MM • DEPTH 1050 MM • HEIGHT: 2150-2350 MM • HEIGHT WITH WHEELS: 2300- 2500 MM
- 24. MODULAR SOUND INSULATEDCONFERENCE ROOM • GLASS FRONT WALL; GLASS CAN BE DECALED • SLIDING OR HINGED DOOR • SOUND ABSORBING PANELS INSIDE • STANDARD DIMENSIONS: • WIDTH: 1050 MM • DEPTH: 1650 MM • HEIGHT: 2400 MM POSTITALO, HELSINKI
- 25. REPRESENTATIVE AND SOUNDABSORBING SURFACES • MATERIAL: FIBRE GYPSUM, CEMENT CHIPBOARD, MDF, GLASS OR ACOUSTIC PANEL • SURFACE: PAINTED, VENEERED, LAMINATED, COLOURED GLASS OR FABRIC-COVERED. HELSINKI-VANTAAAIRPORT SHOPPING MALL ZEPPELIN, OULU FINNISH NATURE CENTRE HALTIA, ESPOO SERLACHIUS MUSEUM, GÖSTA PAVILION, MÄNTTÄ
- 26. PARTITION WALL • CONSISTOF V-JOINTED PANELS. • THE FRAME OF THE WALL CONSISTS OF SPRING-LOADED VERTICAL STEEL STUDS WHICH SECURE THE WALL TIGHTLY BETWEEN THE FLOOR AND THE CEILING. • THE SURFACE PANELS ARE 13 MM WALLPAPERED GYPSUM, 12 MM FACTORY PAINTED MDF PANELS OR HARDWOOD VENEERED MDF PANELS. • USES: OFFICES AND PRODUCTION FACILITIES • WALL THICKNESS: FLEXY 98 MM, FLEXY DB 124 MM • VERTICAL STUD: WIDTH 72 MM, MATERIAL STRENGTH 0.7 MM • STUD SPACING: 900 MM • PANEL HEIGHT: 3300 MM • INSULATION MATERIAL: MINERAL WOOL, THICKNESS 50 MM, DENSITY 30 KG/M3, NON-FLAMMABLE • SOUND INSULATION: SERVICA, KUOPIO
- 27. PARTITION WALL • ITIS A PARTITION WALL WITH HAT PROFILE JOINTS. • THE SURFACE PANELS ARE FIXED TO THE FRAME WITH HAT PROFILES. • THE SURFACE PANELS ARE 13 MM GYPSUM OR 12 MM FACTORY PAINTED MDF PANELS. • USES: OFFICES AND PRODUCTION FACILITIES • WALL THICKNESS: HANDY 98 MM, HANDY DB 124 MM • VERTICAL ROD: WIDTH 72 MM, MATERIAL STRENGTH 0.7 MM • STUD SPACING: 900 MM • PANEL HEIGHT: 3000 MM, 3300 MM • INSULATION MATERIAL: MINERAL WOOL, THICKNESS 50 MM, DENSITY ABOUT 30 KG/M3, NON-FLAMMABLE • SOUND INSULATION: TECHNOPOLIS INNOVA 4, JYVÄSKYLÄ HAT PROFILE, END CAP COAT HOOK NOTICE BOARD HOOK NOTICE BOARD SHELF MARKER BOARD MAGAZINE HOLDER
- 28. ELEMENT PARTITION WALL •CONSISTS OF READY-MADE WALL ELEMENTS WITH BUTT JOINTS. • THE SURFACE OPTIONS ARE 11 MM WALLPAPERED CHIPBOARD OR 9 MM/12 MM FACTORY PAINTED MDF. • THE FRAME IS USUALLY GLUED LAMINATED WOOD. WINDOWS AND HINGED DOORS ARE AVAILABLE FOR THE SYSTEM. • USES: OFFICES, CUSTOMERS SERVICE FACILITIES • WALL THICKNESS: 76-98 MM • STANDARD PANEL WIDTH: 600 MM • MAXIMUM WALL HEIGHT: 3300 MM • INSULATION MATERIAL: MINERAL WOOL, THICKNESS 50 MM, DENSITY ABOUT 30 KG/M3, NON- FLAMMABLE STENBERGINRANTA 2, HELSINKI PASILA RAILWAY STATION, HELSINKI PASILA RAILWAY STATION, HELSINKI