PDave' Resume' (7)

PDave' Resume' (7)

• 1.
  PRABODH N. DAVE 7036Lennox Avenue Tel. (301)-605-4465 (Cell) Elkridge, MD 21075 Email: [email protected] OBJECTIVE: Quality control position with growth oriented company seeking an individual with twenty six years of experience. EXPERIENCE ATK (Space), Beltsville, MD 20705 2001 – Nov.2014 Senior Inspector.  Receiving Inspection of flight hardware & material per NAS and MS standard  In process inspection of heat pipes, panels, and Loop Heat Pipe according to customer’s requirement.  Dimensional inspection of flight and non-flight parts using CMM machine and other standard measuring techniques  To check and approve final data package for customer.  To inspect first article according to customer drawing.  Final inspection with source inspector before shipping.  Familiar with ANSI/ASQ Z1.4-2008,ANSI/ASQC S2 and ANSI/ASQC M1- 1995. Familiar with Dimensional and Tolerance per ASME Y14.5M-1994  Inspection of Aluminum welds per AWS D17.1: 2001 and MIL-STD-2219A  To co-ordinate with production and Engineering personnel to get maximize output.  Familiar with Electrostatic Discharge Control per procedure GSFC-WM-001A Unitek,. Centerville, VA 20121 2001-Present Source Inspector  Inspection of flight parts at supplier, Ethernet and Harness and cable approved by Lockheed Martin Company and according to LM’s instruction.  Also, dimensional inspection of missile parts at supplier approved by Orbital Science, Missile division, Arizona. Beretta USA Corporation, Accokeek, MD 20607 1988 - 2001 Lead Quality Control Technician Responsibilities include:  Lead position and supervising inspection of incoming parts with other inspectors using Gages and measuring equipments.  Perform First Article Inspection of machine parts and Investment castings.  To measure dimensions of parts using open-set up techniques.  Inspection priorities as per production schedule.  Familiar with sampling Inspection Plan per MIL-STD-105E and make dimensional inspection reports.  Report of major and minor characteristics using gages and measuring techniques.  Maintain proper records of documents of different parts from vendors and to notify vendors to initiate corrective action as needed.  Confirm material is to proper specifications.  Familiar with the MIL-I-45208A, MIL-STD-45662, MIL-W-63150  Internal Auditing of Inspection documents generated by Inspectors.  Training of New Personnel for Inspection procedures and methods of inspection.  Upgrade Calibration record and maintain accuracy of measuring equipments.  Familiar with calibration of measuring equipment and gages per MIL-STD-120
• 2.
  Inspector April 1988- March 1992.  Inspection of incoming parts from the vendors.  Source inspection of completed lots at vendor’s facility.  Inspection in process, heat-treated and final inspection of machined parts. Jyoti Engineering Ltd., Baroda, India. 1974-1988 Senior Production Engineer (1984-1987)  Deal with project activities and solving problems through drawing scrutiny, quality meetings, process control charts, purchase decisions and inventory control of hydraulic pumps, turbines electric generators and motors.  Oversee weekly and monthly production targets as per annual operation plan.  Plan the training program to increase productivity and quality of different areas of Production personnel.  Minimize the production cost by examining and investigating cost affecting factors and different areas of production services like tool design, pattern design, machining hours and material procurement.  Review site problems and investigate defects and implement new assembly processes. Assistant Production Engineer (1977-1983)  Coordinate between R&D, marketing, purchasing and inspection for efficient production.  Make process charts of components and communicate with tool design and industrial engineering.  Expedite regular supply of finished components to assembly shop. Junior Engineer, Assembly Inspection (1974-1977)  Functional inspection of subassemblies and final assemblies.  Source inspection of fabricated and machined components.  Submit and oversee in-house source inspection by client inspectors and follow their procedures  Assure quality of assembled parts through proper documentation, inspection and client requirements. Education: • B.S. Mechanical engineering (1973) • Maharaja Sayajirao University of Baroda, India. • Certified ASQC Quality Engineer (CQE) refresher course finished. • Attended inspection and gaging course. • Attended Statistical Concept Course. • Familiar with ISO 9000 • Operation of MS Windows, Excel, PowerPoint, word & Window 95. • Familiar with Auto-Cad Ver.14 Professional Affiliation: • Member of American Society of Quality Control. References: Michael Mezzadra 240-417-9185 @ ATK Space