PIR Sensor D203B www.onlineTPS.com
0 likes1,883 views
The document is a manual for a PIR (pyroelectric infrared) radial sensor. It describes the sensor's specifications and operation. The sensor detects infrared radiation using a pyroelectric material that changes polarization with temperature. It uses dual compensated sensing elements to improve stability against temperature variations. Typical applications include security systems, lighting control, and toys. It provides testing methods, circuit diagrams, direction for use, and contact information for the manufacturer.
![SENSOR MANUAL
General-Purpose Dual Element Pyroelectric Infrared Radial Sensor
The pyroelectric infrared sensor detects infrared radiation on the basis of the
characteristics that the polarization of pyroelectric material changes with temperature.
Dual compensated sensing elements are applied to suppress the interference resulting
from temperature variation. As a result, the operating stability of the sensor is greatly
improved. Our products can be used in many applications. Such as in security systems,
burglar alarms, visitor acknowledgement, light switch control and intellectualized toy,
etc.
„ Standard Specifications and Dimensions
Recommended Model D203B
Encapsulation Type TO-5
IR Receiving Electrode 2×1mm, 2 elements
Window Size 5×3.8mm
Spectral Response 5-14µm
Transmittance ≥75%
Signal Output [Vp-p] ≥3500mV
Sensitivity ≥3300V/W
Detectivity (D*) ≥1.4 ×108 cmHz1/2/W
Noise[Vp-p] <70mV
Output Balance <10%
Offset Voltage 0.3-1.2V
Supply V oltage 3-15V
Operating Temp. -30-70ºC
Storage Temp. -40-80ºC
1.Drain
2.Source
Field of View 3.Ground
Equivalent Circuit
Equivalent Circuit
Page 2 of 6 PIRSENSORCO.,LTD.](https://image.slidesharecdn.com/pirsensord203b-110827153639-phpapp02/85/PIR-Sensor-D203B-www-onlineTPS-com-2-320.jpg)
PIR Sensor D203B www.onlineTPS.com
- 1. SENSOR MANUAL Pyroelectric Infrared Radial Sensor Model:D203B PIR SENSOR CO., LTD www.onlineTPS.com _______________________________________________________________________________ Page 1 of 6 PIR SENSOR CO.,LTD.
- 2. SENSOR MANUAL General-Purpose Dual Element Pyroelectric Infrared Radial Sensor The pyroelectric infrared sensor detects infrared radiation on the basis of the characteristics that the polarization of pyroelectric material changes with temperature. Dual compensated sensing elements are applied to suppress the interference resulting from temperature variation. As a result, the operating stability of the sensor is greatly improved. Our products can be used in many applications. Such as in security systems, burglar alarms, visitor acknowledgement, light switch control and intellectualized toy, etc. „ Standard Specifications and Dimensions Recommended Model D203B Encapsulation Type TO-5 IR Receiving Electrode 2×1mm, 2 elements Window Size 5×3.8mm Spectral Response 5-14µm Transmittance ≥75% Signal Output [Vp-p] ≥3500mV Sensitivity ≥3300V/W Detectivity (D*) ≥1.4 ×108 cmHz1/2/W Noise[Vp-p] <70mV Output Balance <10% Offset Voltage 0.3-1.2V Supply V oltage 3-15V Operating Temp. -30-70ºC Storage Temp. -40-80ºC 1.Drain 2.Source Field of View 3.Ground Equivalent Circuit Equivalent Circuit Page 2 of 6 PIRSENSORCO.,LTD.
- 3. SENSOR MANUAL „ T Method est Test conditions ♦ Ambient temperature 25ºC ♦ Black-body temperature 420K(147ºC) ♦ Modulating frequency 1 Hz, 0.3-3.5Hz f, ♦ 72.5 dB Amplifier The sensitivity balance of dual element sensor is calculated through testing the sensitivity (single signal output voltage) of each element and using the following formula: Balance |V = A-VB|/(VA+VB) ×100% VA = Sensitivity of side A ( mVp-p ) VB = Sensitivity of side B ( mVp-p ) Page 3 of 6 PIRSENSORCO.,LTD.
- 4. SENSOR MANUAL „ Typical Application Notice: U1A-D:LM324 Vdd:12VDC Rs=47K Ω @ on an offset voltage „ Spectral Response of Window Materials Notice: The above curve is the typical figure of 5.5 m pass IR filter, the curve is the average value of IR transmittance, the window’s substrate is vacuum-coated with semiconductor material. Page 4 of 6 PIRSENSORCO.,LTD.
- 5. SENSOR MANUAL „ Fresnel Lens for Human Body Detection „ Directions for Use y Pay attention to the mounting direction of the sensor’s element and the size of element ichnography. Combining with focus of Fresnel lens can achieve a optimal optics design. y The ex-factory parameter of sensor is gained by testing in the condition of standard Black Body and the relevant circuit after one minute steadying-time. y The detecting distance of sensor is a multidimensional function, consisting of ambient temperature, temperature of moving target , target distance of Fresnel Lens’, ambient humidity , amplifier gain and comparison voltage. y The welding shall be made at 4mm above as per the recommendation for lead wire of sensor seat, and the welding should be completed in the shortest possible time. y Do not touch the window by hand and the hard things directly. y Strong shake and static should be avoided. y This products are packed with the environmental protection material ,and the sensors’ surface has been covered specially with OHK anti-erode material, 100pcs per small package ,3000pcs per large package. Page 5 of 6 PIRSENSORCO.,LTD.
- 6. SENSOR MANUAL SALES OFFICE SHENZHEN SENBA OPTICAL & ELECTRONIC CO., LTD. Add:No.3 Building,HuaFeng Industry Area, 39 District ,BaoAn ,ShenZhen City,China Web:www.sbcds.com.cn E-mail:[email protected] T +86-755-27896456 27895077 el: Fax:+86-755-27897072 27895396 www.onlineTPS.com Page 6 of 6 PIRSENSORCO.,LTD.