Cris Neuman, profile picture
Uploaded byCris Neuman
PPTX, PDF1,391 views

Presentation hazcom to meet OSHA 12/13 Compliance

This document provides an overview of changes to material safety data sheets (MSDS) that are being implemented to comply with the Global Harmonization Standard (GHS) by 2015. Key changes include MSDS becoming safety data sheets (SDS) with a standardized 16-section format. Labeling must include standardized signal words, pictograms, hazard statements and precautionary statements. The document reviews the new SDS format and provides examples of what the new labels will look like. It emphasizes the importance of understanding the new labeling system so workers can safely handle, store and respond to hazardous chemicals.

Embed presentation

Downloaded 62 times
HAZ COM OSHA Training 2013 MSDS >>>>SDS  What the changes are and how to read them 9/10/2013 0
MSDS defined  A Material Safety Data Sheet (MSDS) is a document that provides vital information related to any chemical or substance the Occupational Safety and Health Administration (OSHA) deems hazardous. MSDS sheets are for employees and employers who have such materials in their workplace and are also a useful tool for any emergency responders in the event of a spill or exposure. OSHA performs routine inspections of workplaces and requires workers to know how to read MSDS sheets. 1
MSDS becomes SDS by the end of 2013  To ensure that all employees have the information they need to better protect themselves from chemical hazards in the workplace during the transition period, it is critical that all employees understand the new label and SDS formats, as we move towards the Global Harmonization Standards(GHS) by 2015. 2
Changes for 2013 Both Labels and SDS must contain the following:  Product identifier: how the hazardous chemical is identified. This can be (but is not limited to) the chemical name, code number or batch number. The manufacturer, importer or distributor can decide the appropriate product identifier. The same product identifier must be both on the label and in Section 1 of the SDS (Identification). 3
Changes (Cont.)  Signal word: used to indicate the relative level of severity of hazard and alert the reader to a potential hazard on the label. There are only two signal words, “Danger and “Warning.” Within a specific hazard class, “Danger” is used for the more severe hazards and “Warning” is used for the less severe hazards. There will only be one signal word on the label no matter how many hazards a chemical may have. If one of the hazards warrants a “Danger” signal word and another warrants the signal word “Warning,” then only “Danger” should appear on the label. 4
More changes  Hazard statement(s): describe the nature of the hazard(s) of a chemical, including, where appropriate, the degree of hazard. For example: “Causes damage to kidneys through prolonged or repeated exposure when absorbed through the skin.” All of the applicable hazard statements must appear on the label. Hazard statements may be combined where appropriate to reduce redundancies and improve readability. The hazard statements are specific to the hazard classification categories, and chemical users should always see the same statement for the same hazards, no matter what the chemical is or who produces it. 5
And finally,  Precautionary statement(s): means a phrase that describes recommended measures that should be taken to minimize or prevent adverse effects resulting from exposure to a hazardous chemical or improper storage or handling.  Name, address and phone number of the chemical manufacturer, distributor, or importer. 6
SDS Labels  Information on the label can be used to ensure proper storage of hazardous chemicals.  Information on the label might be used to quickly locate information on first aid when needed by employees or emergency personnel. 7
What is on the Pictogram?  Where a chemical has multiple hazards, different pictograms are used to identify the various hazards. You should expect to see the appropriate pictogram for the corresponding hazard class. And when there are similar precautionary statements, the one providing the most protective information will be included on the label. 8
Pictograms  Pictogram: OSHA’s required pictograms must be in the shape of a square set at a point and include a black hazard symbol on a white background with a red frame sufficiently wide enough to be clearly visible. A square red frame set at a point without a hazard symbol is not a pictogram and is not permitted on the label. OSHA has designated eight pictograms under this standard for application to a hazard. 9
What does a GHS Pictogram look like? 10
Health Hazards Classification  Acute Toxicity –Contact by skin or ingestion produces adverse effects within 24 hrs. , or 4 hrs. by inhalation Can be one or more doses.  Skin Corrosion – irreversible damage to skin after up to 4 hrs. of contact  Skin Irritation – reversible damage to skin after up to 4 hrs. of contact  Serious eye damage - produces irreversible eye tissue damage in the eye within 21 hours of contact  Eye Irritation - production of reversible changes in the eye within 21 days of contact  Respiratory Sensitizer – induces hypersensitivity after inhalation  Skin Sensitizer – induces allergic reaction after contact 11
Health Hazard Classifications (Cont)  Carcinogen - induces or increases cancer incidence in the organism  Mutagen – affects the cells genetic material producing abnormal development of an organism  Reproductive- Toxicity - adverse effects on sexual function and fertility in adult males and females and even offspring development  Specific Target Organ Toxicity – Single Exposure One exposure damages or affects target organs to which the material is more attracted or compatible to.  Specific Target Organ Toxicity – Repeated Exposure Same as prior category but requiring multiple doses or exposures  Aspiration Hazard – damage caused by entry of a liquid or solid directly through the oral or nasal cavity, or into the lower respiratory system 12
Current Label with Quick indicator markings 13 This diagram is numbered 1-4 with 4 being the highest level. White indicates the protective gear needed: for example, G means gloves and goggles.
Alternate signs 14
New SDS Sample label 15
When placing SDS Labels, you must ensure visibility! 16
What you need to know.  Know how to use the information on the label to ensure proper storage of hazardous chemicals.  Know how to use the information on the label to quickly locate information on first aid when needed by employees or emergency personnel. You are responsible for your general understanding of how the elements work together on a label. For example,  Where a chemical has multiple hazards, different pictograms are used to identify the various hazards. The employee should expect to see the appropriate pictogram for the corresponding hazard class. And when there are similar precautionary statements, the one providing the most protective information will be included on the label. 17
Labels and SDS sheet should match  Every precautionary statement would be the same on the label and on the SDS. 18
What else you need to know  For example, you should know that with the new format, Section 8 (Exposure Controls/Personal Protection) will always contain information about exposure limits, engineering controls and ways to protect yourself, including personal protective equipment (PPE). 19
Section 1- Identification The format of the 16-section SDS is the same as ANSI and should include the following sections:  Section 1. Identification: identifies the chemical on the SDS as well as the recommended uses. It also provides the essential contact information of the supplier.  Precautionary statement(s).  Description of any hazards not otherwise classified. 20
Section 2- Hazard Identification  Section 2. Hazard(s) identification: identifies the hazards of the chemical presented on the SDS and the appropriate warning information associated with those hazards. The required information consists of:  The hazard classification of the chemical (e.g., flammable liquid, category1).  Signal word.  Hazard statement(s).  Pictograms (the pictograms or hazard symbols may be presented as graphical reproductions of the symbols in black and white or be a description of the name of the symbol (e.g., skull and crossbones, flame). 21
Section 3- Composition/information on ingredients  Identifies the ingredient(s) contained in the product indicated on the SDS, including impurities and stabilizing additives. This section includes information on substances, mixtures, and all chemicals where a trade secret is claimed. The required information consists of: Substances, Mixtures and Trade Secrets. 22
Section 3- Substances Substances Chemical name.  Common name and synonyms.  Chemical Abstracts Service (CAS) number and other unique identifiers.  Impurities and stabilizing additives, which are themselves classified and which contribute to the classification of the chemical. 23
Section 3- Mixtures  Mixtures  Same information required for substances.  The chemical name and concentration (i.e., exact percentage) of all ingredients which are classified as health hazards and are:  Present above their cut-off/concentration limits or  Present a health risk below the cut-off/concentration limits.  The concentration (exact percentages) of each ingredient must be specified except concentration ranges may be used in the following situations:  A trade secret claim is made,  There is batch-to-batch variation, or  The SDS is used for a group of substantially similar mixtures. 24
Section 3, Trade Secrets Chemicals where a trade secret is claimed:  A statement that the specific chemical identity and/or exact percentage (concentration) of composition has been withheld as a trade secret is required. 25
Section 4- First Aid This section describes the initial care that should be given by untrained responders to an individual who has been exposed to the chemical. The required information consists of:  Necessary first-aid instructions by relevant routes of exposure (inhalation, skin and eye contact, and ingestion).  Description of the most important symptoms or effects, and any symptoms that are acute or delayed.  Recommendations for immediate medical care and special treatment needed, when necessary. 26
Section 5 –Fire Fighting  This section provides recommendations for fighting a fire caused by the chemical. The required information consists of:  Recommendations of suitable extinguishing equipment, and information about extinguishing equipment that is not appropriate for a particular situation.  Advice on specific hazards that develop from the chemical during the fire, such as any hazardous combustion products created when the chemical burns.  Recommendations on special protective equipment or precautions for firefighters. 27
Section 6- Accidental Release Accidental Release Measures  This section provides recommendations on the appropriate response to spills, leaks, or releases, including containment and cleanup practices to prevent or minimize exposure to people, properties, or the environment. It may also include recommendations distinguishing between responses for large and small spills where the spill volume has a significant impact on the hazard. The required information may consist of recommendations for:  Use of personal precautions (such as removal of ignition sources or providing sufficient ventilation) and protective equipment to prevent the contamination of skin, eyes, and clothing.  Emergency procedures, including instructions for evacuations, consulting experts when needed, and appropriate protective clothing. Methods and materials used for containment (e.g., covering the drains and capping procedures).  Cleanup procedures (e.g., appropriate techniques for neutralization, decontamination, cleaning or vacuuming; adsorbent materials; and/or equipment required for containment/clean up). 28
Section 7- Handling and Storage This section provides guidance on the safe handling practices and conditions for safe storage of chemicals. The required information consists of:  Precautions for safe handling, including recommendations for handling incompatible chemicals, minimizing the release of the chemical into the environment, and providing advice on general hygiene practices (e.g., eating, drinking, and smoking in work areas is prohibited).  Recommendations on the conditions for safe storage, including any incompatibilities. Provide advice on specific storage requirements (e.g., ventilation requirements). 29
Section 8- Exposure Controls and Personal Protection This section indicates the exposure limits, engineering controls, and personal protective measures that can be used to minimize worker exposure. The required information consists of:  OSHA Permissible Exposure Limits (PELs), American Conference of Governmental Industrial Hygienists (ACGIH) Threshold Limit Values (TLVs), and any other exposure limit used or recommended by the chemical manufacturer, importer, or employer preparing the safety data sheet, where available.  Appropriate engineering controls (e.g., use local exhaust ventilation, or use only in an enclosed system).  Recommendations for personal protective measures to prevent illness or injury from exposure to chemicals, such as personal protective equipment (PPE) (e.g., appropriate types of eye, face, skin or respiratory protection needed based on hazards and potential exposure). Any special requirements for PPE, protective clothing or respirators (e.g., type of glove material, such as PVC or nitrile rubber gloves; and breakthrough time of the glove material). 30
Section 9- Physical and Chemical Properties  The minimum required information consists of:  Appearance (physical state, color, etc.);  Upper/lower flammability or explosive limits;  Odor; Vapor pressure; Odor threshold; Vapor density;  pH; Relative density; Melting point/freezing point; Solubility(ies);  Initial boiling point and boiling range;  Partition coefficient: n-octanol/water;  Flash point; Auto-ignition temperature;  Evaporation rate; Decomposition temperature; and  Flammability (solid, gas); Viscosity. 31
But not much is listed on this SDS  The SDS may not contain every item on the above list because information may not be relevant or is not available. When this occurs, a notation to that effect must be made for that chemical property. Manufacturers may also add other relevant properties, such as the dust deflagration index (Kst) for combustible dust, used to evaluate a dust’s explosive potential. 9/10/2013 32
Section 10- Reactivity This section describes the reactivity hazards of the chemical and the chemical stability information. This section is broken into three parts: reactivity, chemical stability, and other. The required information consists of: Reactivity  Description of the specific test data for the chemical(s). This data can be for a class or family of the chemical if such data adequately represent the anticipated hazard of the chemical(s),where available. 33
Section 10 Chemical stability  Indication of whether the chemical is stable or unstable under normal ambient temperature and conditions while in storage and being handled.  Description of any stabilizers that may be needed to maintain chemical stability.  Indication of any safety issues that may arise should the product change in physical appearance. 34
Section 10 Other  Indication of the possibility of hazardous reactions, including a statement whether the chemical will react or polymerize, which could release excess pressure or heat, or create other hazardous conditions. Also, a description of the conditions under which hazardous reactions may occur.  List of all conditions that should be avoided (e.g., static discharge, shock, vibrations, or environmental conditions that may lead to hazardous conditions).  List of all classes of incompatible materials (e.g., classes of chemicals or specific substances) with which the chemical could react to produce a hazardous situation.  List of any known or anticipated hazardous decomposition products that could be produced because of use, storage, or heating. (Hazardous combustion products should also be included in Section 5 (Fire-Fighting Measures) of the SDS. 35
Section 11- Toxicological Information  This section identifies toxicological and health effects information or indicates that such data are not available. The required information consists of:  Information on the likely routes of exposure (inhalation, ingestion, skin and eye contact). The SDS should indicate if the information is unknown.  Description of the delayed, immediate, or chronic effects from short- and long-term exposure.  The numerical measures of toxicity (e.g., acute toxicity estimates such as the LD50 (median lethal dose)) - the estimated amount [of a substance] expected to kill 50% of test animals in a single dose.  Description of the symptoms. This description includes the symptoms associated with exposure to the chemical including symptoms from the lowest to the most severe exposure.  Indication of whether the chemical is listed in the National Toxicology Program (NTP) Report on Carcinogens (latest edition) or has been found to be a potential carcinogen in the International Agency for Research on Cancer (IARC) Monographs (latest editions) or found to be a potential carcinogen by OSHA. 36
Section 12- Ecological Information (non-mandatory) This section provides information to evaluate the environmental impact of the chemical(s) if it were released to the environment. The information may include:  Data from toxicity tests performed on aquatic and/or terrestrial organisms, where available (e.g., acute or chronic aquatic toxicity data for fish, algae, crustaceans, and other plants; toxicity data on birds, bees, plants).  Whether there is a potential for the chemical to persist and degrade in the environment either through biodegradation or other processes, such as oxidation or hydrolysis.  Results of tests of bioaccumulation potential, making reference to the octanol-water partition coefficient (Kow) and the bioconcentration factor (BCF), where available.  The potential for a substance to move from the soil to the groundwater (indicate results from adsorption studies or leaching studies).  Other adverse effects (e.g., environmental fate, ozone layer depletion potential, photochemical ozone creation potential, endocrine disrupting potential, and/or global warming potential). 37
Section 13- Disposal Considerations ( non-mandatory)  This section provides guidance on proper disposal practices, recycling or reclamation of the chemical(s) or its container, and safe handling practices. To minimize exposure, this section should also refer the reader to Section 8 (Exposure Controls/Personal Protection) of the SDS.  The information may include:  Description of appropriate disposal containers to use.  Recommendations of appropriate disposal methods to employ.  Description of the physical and chemical properties that may affect disposal activities.  Language discouraging sewage disposal.  Any special precautions for landfills or incineration activities. 38
Section 14- Transport Information (non-mandatory) This section provides guidance on classification information for shipping and transporting of hazardous chemical(s) by road, air, rail, or sea. The information may include:  UN number (i.e., four-figure identification number of the substance).  UN proper shipping name.  Transport hazard class(es).  Packing group number, if applicable, based on the degree of hazard.  Environmental hazards (e.g., identify if it is a marine pollutant according to the International Maritime Dangerous Goods Code (IMDG Code)).  Guidance on transport in bulk (according to Annex II of MARPOL 73/783 and the International Code for the Construction and Equipment of Ships Carrying Dangerous Chemicals in Bulk (International Bulk Chemical Code (IBC Code)).  Any special precautions which an employee should be aware of or needs to comply with, in connection with transport or conveyance either within or outside their premises. 39
Section 15- Regulatory Information (non-mandatory)  This section identifies the safety, health, and environmental regulations specific for the product that is not indicated anywhere else on the SDS. The information may include:  Any national and/or regional regulatory information of the chemical or mixtures (including any OSHA, Department of Transportation, Environmental Protection Agency, or Consumer Product Safety Commission regulations). 40
The non OSHA regulated sections 41 Section 12. Ecological information Section 13. Disposal considerations Section 14. Transport information Section 15. Regulatory information In regard to Sections 12-15; OSHA does not regulate these areas, they concern matters handled by other agencies. These sections are however, required by the GHS.
Section 16- Other Information  This section indicates when the SDS was prepared or when the last known revision was made.  The SDS may also state where the changes have been made to the previous version. You may wish to contact the supplier for an explanation of the changes. Other useful information also may be included here. 42
Summary of SDS  Section 1: Identification  Section 2: Hazard(s) Identification  Section 3: Composition/Information on Ingredients  Section 4. First-Aid measures  Section 5. Fire-fighting measures  Section 6. Accidental release measures  Section 7. Handling and storage  Section 8. Exposure controls/personal protection 43
SDS summary (cont.)  Section 9. Physical and chemical properties  Section 10. Stability and reactivity  Section 11. Toxicological information  Section 12. Ecological information (non- mandatory)  Section 13. Disposal considerations (non- mandatory)  Section 14. Transport information (non- mandatory)  Section 15. Regulatory information (non- mandatory)  Section 16. Other information, including date of preparation or last revision 44
Summary of Labels  Name, Address and Telephone Number  Product Identifier  Signal Word  Hazard Statement(s)  Precautionary Statement(s)  Pictogram(s) 45
Part 7 of the HAZCOM plan  Hazard Assessment: what is our risk level onsite?  Develop a written HAZCOM Plan to meet that risk: A written plan should include lists of hazardous chemicals present; labeling of containers of chemicals in the workplace, as well as of containers of chemicals being shipped to other workplaces; preparation and distribution of safety data sheets to employees; and development and implementation of employee training programs regarding hazards of chemicals and protective measures.  Appointment of a HAZCOM Coordinator  Conduct the chemical inventory  Initiate labeling requirements  Maintain the MSDS/SDS library  Establish employee training 46

More Related Content

PDF
OSHA Hazard Communication and Global Harmonization System (GHS)
byElena Fracassa
 
PPT
Global Harmonization Standard Changes to OSHA HACOM Rule
byThe Windsdor Consulting Group, Inc.
 
PPTX
OSHA and GHS HAZCOM Training by Marie Athey
byJames Palinsad
 
PPTX
GHS presentation
byAtlantaSafetyCouncil
 
PDF
Hazard Communication How-To: Get Compliant with GHS Standards
byHNI Risk Services
 
PDF
What You Need to Know About GHS Labeling Solutions
byPeak-Ryzex
 
PDF
HazCom/GHS labels 101
byQuantum Compliance
 
PPTX
GHS Sytems for Operations
byNimonik
 
OSHA Hazard Communication and Global Harmonization System (GHS)
byElena Fracassa
 
Global Harmonization Standard Changes to OSHA HACOM Rule
byThe Windsdor Consulting Group, Inc.
 
OSHA and GHS HAZCOM Training by Marie Athey
byJames Palinsad
 
GHS presentation
byAtlantaSafetyCouncil
 
Hazard Communication How-To: Get Compliant with GHS Standards
byHNI Risk Services
 
What You Need to Know About GHS Labeling Solutions
byPeak-Ryzex
 
HazCom/GHS labels 101
byQuantum Compliance
 
GHS Sytems for Operations
byNimonik
 

What's hot

PPT
Hazard communication update
byAndy Mihans
 
PPS
Hazcom including ghs revisions-silps 2013-6-4-2013 show
bykjones9999
 
PPTX
Hazcom Training - OSHA 2013 requirement
byKristin Franks
 
PDF
Ghs revision training un manual 6 training update
byTerry Penney
 
PPTX
GHS: A Plan for Compliance
byTriumvirate Environmental
 
PDF
OSHA Hazard Communication Standard 2021 Proposed Rule
byJim Botkin
 
PPTX
OSHA Hazard Communication and GHS Requirements for Product Labels and SDS
byThe Windsdor Consulting Group, Inc.
 
PDF
Globally Harmonized Standard - Resource Bulletin
byComplianceSigns, LLC
 
PDF
Chemical hazards classification symbol
byGovindanayagi P
 
PPTX
Hazard Communication
byMarshal Miller
 
Hazard communication update
byAndy Mihans
 
Hazcom including ghs revisions-silps 2013-6-4-2013 show
bykjones9999
 
Hazcom Training - OSHA 2013 requirement
byKristin Franks
 
Ghs revision training un manual 6 training update
byTerry Penney
 
GHS: A Plan for Compliance
byTriumvirate Environmental
 
OSHA Hazard Communication Standard 2021 Proposed Rule
byJim Botkin
 
OSHA Hazard Communication and GHS Requirements for Product Labels and SDS
byThe Windsdor Consulting Group, Inc.
 
Globally Harmonized Standard - Resource Bulletin
byComplianceSigns, LLC
 
Chemical hazards classification symbol
byGovindanayagi P
 
Hazard Communication
byMarshal Miller
 

Viewers also liked

PPT
Material Safety Data Sheet
byReliance
 
PPTX
Msds training
byEmeka Anugom
 
PPTX
Introduction to MSDS
byAshiqur Rahman
 
PPT
Consulting MSDS
byNadeem Baig
 
PDF
Msds
bysherylwil
 
ODP
NFPA and MSDS
byalchemist
 
PPT
Material Safety Data Sheets
bySteve Forbes-Taber
 
Material Safety Data Sheet
byReliance
 
Msds training
byEmeka Anugom
 
Introduction to MSDS
byAshiqur Rahman
 
Consulting MSDS
byNadeem Baig
 
Msds
bysherylwil
 
NFPA and MSDS
byalchemist
 
Material Safety Data Sheets
bySteve Forbes-Taber
 

Similar to Presentation hazcom to meet OSHA 12/13 Compliance

PPTX
Safety Data Sheet ( SDS )
byAhmad Thanin
 
PPTX
HAZCOM
byArkansas STEPS Network
 
PPTX
Master understanding ghs for workers (eng) just ghs
byJessee McClellan
 
PDF
Ghs compliance-toolkit-from-p bar y safety consultants
byTerry Penney
 
PPTX
Sds
byDaryl Sullivan
 
PPT
Module-2-GHS-SDMulti-Clean.ppt TRAINING AWARENESS
bybalamurugans98
 
PPT
Ghs Training - Approved 9-27-13 PPT03
bytheukfan
 
PDF
Safety Course in chemical laboratory.pdf
byYehia El Shazly
 
PPTX
MSDS-SDS PPT.ppt industrial hygiene pptt
byBhavaniBudi
 
PPTX
Ghs training for all sckmc staff
bysckrmc
 
PPTX
Revised hazard communication standard
bytabbott8
 
PPTX
Revised hazard communication standard
bytabbott8
 
PPTX
Globally Harmonized System and Environment
bymaityarindam159
 
PPTX
Hazcom GHS Compliance Guide
byJackInChicago
 
PPTX
Ghs 2013 csc
byvtsiri
 
PPTX
3 ghs
byStephanie Mae Beleña
 
PPTX
New haz com presentation
byTony Layne
 
PPT
McClintock SDS Training
byMichael Kay
 
PPTX
Round Rock PARD OSHA Training
bySarah Walters
 
PPTX
(M)SDSs now and in the future
byOccupational Health and Safety Industry Group
 
Safety Data Sheet ( SDS )
byAhmad Thanin
 
HAZCOM
byArkansas STEPS Network
 
Master understanding ghs for workers (eng) just ghs
byJessee McClellan
 
Ghs compliance-toolkit-from-p bar y safety consultants
byTerry Penney
 
Sds
byDaryl Sullivan
 
Module-2-GHS-SDMulti-Clean.ppt TRAINING AWARENESS
bybalamurugans98
 
Ghs Training - Approved 9-27-13 PPT03
bytheukfan
 
Safety Course in chemical laboratory.pdf
byYehia El Shazly
 
MSDS-SDS PPT.ppt industrial hygiene pptt
byBhavaniBudi
 
Ghs training for all sckmc staff
bysckrmc
 
Revised hazard communication standard
bytabbott8
 
Revised hazard communication standard
bytabbott8
 
Globally Harmonized System and Environment
bymaityarindam159
 
Hazcom GHS Compliance Guide
byJackInChicago
 
Ghs 2013 csc
byvtsiri
 
3 ghs
byStephanie Mae Beleña
 
New haz com presentation
byTony Layne
 
McClintock SDS Training
byMichael Kay
 
Round Rock PARD OSHA Training
bySarah Walters
 
(M)SDSs now and in the future
byOccupational Health and Safety Industry Group
 

Recently uploaded

PPTX
Business management and practices unit 1
byVinuthPaul
 
PDF
occupational pension increases.pdf William Mcgrath
byHenry Tapper
 
PDF
How Can I Verify the Authenticity of Cash App Account?
bybestselleryb.com
 
PDF
Buy Snapchat Accounts in usa all country sells (1).pdf
byjtjf0730
 
PDF
20251106-ppi-press-release-collective-pensions-with-investment-choice.pdf
byHenry Tapper
 
PDF
Rural Frontier Entrepreneurship Presentation for NOVA Entrepreneur Center
byPayson Johnston
 
DOCX
Buy Verified Western Union Accounts 2025.docx
byusatrustacc3
 
PDF
What will the payments world look like in 2030?
byChris Skinner
 
PDF
AI is Not Your Next Step: Get Your House in Order First - Edwards Lifescience...
byWellingtone
 
PDF
ASEAN and Thailand in a Disruptive World
byKobsak
 
PPT
Business Management and Preactices - BMP - Unit Two.ppt
byVinuthPaul
 
PDF
Thinking about purchasing a verified PayPal account?
bybestselleryb.com
 
PDF
Dr. David Ford Wilson - A Dual-Certified Psychiatrist
byDr. David Ford Wilson
 
PDF
Enabling PMO to Succeed with Technology: The Lessons - Great Western Railway ...
byWellingtone
 
DOCX
Top 5 Best Places to Buy Verified Sofi Bank Accounts ....docx
byusatrustacc3
 
DOCX
Top 3 Places to Buy Verified Binance Account Instantly.docx
bybusiness Guige Usaallhub
 
PPTX
01_GraydonCreditSafe.pptx_FTBE_Breakfast
byFinTech Belgium
 
PDF
Event Report - SAP TechEd 2025 - Good progress on AI + Data & good news for ...
byHolger Mueller
 
PDF
Stephen Tiller Bahamas - A Seasoned Leader In Real Estate
byStephen Tiller Bahamas
 
PDF
ACEN Nov. 2025 General Meeting. The video is online at the ACEN Substack page
byMark Rauterkus
 
Business management and practices unit 1
byVinuthPaul
 
occupational pension increases.pdf William Mcgrath
byHenry Tapper
 
How Can I Verify the Authenticity of Cash App Account?
bybestselleryb.com
 
Buy Snapchat Accounts in usa all country sells (1).pdf
byjtjf0730
 
20251106-ppi-press-release-collective-pensions-with-investment-choice.pdf
byHenry Tapper
 
Rural Frontier Entrepreneurship Presentation for NOVA Entrepreneur Center
byPayson Johnston
 
Buy Verified Western Union Accounts 2025.docx
byusatrustacc3
 
What will the payments world look like in 2030?
byChris Skinner
 
AI is Not Your Next Step: Get Your House in Order First - Edwards Lifescience...
byWellingtone
 
ASEAN and Thailand in a Disruptive World
byKobsak
 
Business Management and Preactices - BMP - Unit Two.ppt
byVinuthPaul
 
Thinking about purchasing a verified PayPal account?
bybestselleryb.com
 
Dr. David Ford Wilson - A Dual-Certified Psychiatrist
byDr. David Ford Wilson
 
Enabling PMO to Succeed with Technology: The Lessons - Great Western Railway ...
byWellingtone
 
Top 5 Best Places to Buy Verified Sofi Bank Accounts ....docx
byusatrustacc3
 
Top 3 Places to Buy Verified Binance Account Instantly.docx
bybusiness Guige Usaallhub
 
01_GraydonCreditSafe.pptx_FTBE_Breakfast
byFinTech Belgium
 
Event Report - SAP TechEd 2025 - Good progress on AI + Data & good news for ...
byHolger Mueller
 
Stephen Tiller Bahamas - A Seasoned Leader In Real Estate
byStephen Tiller Bahamas
 
ACEN Nov. 2025 General Meeting. The video is online at the ACEN Substack page
byMark Rauterkus
 

Presentation hazcom to meet OSHA 12/13 Compliance

  • 1.
    HAZ COM OSHATraining 2013 MSDS >>>>SDS  What the changes are and how to read them 9/10/2013 0
  • 2.
    MSDS defined  AMaterial Safety Data Sheet (MSDS) is a document that provides vital information related to any chemical or substance the Occupational Safety and Health Administration (OSHA) deems hazardous. MSDS sheets are for employees and employers who have such materials in their workplace and are also a useful tool for any emergency responders in the event of a spill or exposure. OSHA performs routine inspections of workplaces and requires workers to know how to read MSDS sheets. 1
  • 3.
    MSDS becomes SDSby the end of 2013  To ensure that all employees have the information they need to better protect themselves from chemical hazards in the workplace during the transition period, it is critical that all employees understand the new label and SDS formats, as we move towards the Global Harmonization Standards(GHS) by 2015. 2
  • 4.
    Changes for 2013 BothLabels and SDS must contain the following:  Product identifier: how the hazardous chemical is identified. This can be (but is not limited to) the chemical name, code number or batch number. The manufacturer, importer or distributor can decide the appropriate product identifier. The same product identifier must be both on the label and in Section 1 of the SDS (Identification). 3
  • 5.
    Changes (Cont.)  Signalword: used to indicate the relative level of severity of hazard and alert the reader to a potential hazard on the label. There are only two signal words, “Danger and “Warning.” Within a specific hazard class, “Danger” is used for the more severe hazards and “Warning” is used for the less severe hazards. There will only be one signal word on the label no matter how many hazards a chemical may have. If one of the hazards warrants a “Danger” signal word and another warrants the signal word “Warning,” then only “Danger” should appear on the label. 4
  • 6.
    More changes  Hazardstatement(s): describe the nature of the hazard(s) of a chemical, including, where appropriate, the degree of hazard. For example: “Causes damage to kidneys through prolonged or repeated exposure when absorbed through the skin.” All of the applicable hazard statements must appear on the label. Hazard statements may be combined where appropriate to reduce redundancies and improve readability. The hazard statements are specific to the hazard classification categories, and chemical users should always see the same statement for the same hazards, no matter what the chemical is or who produces it. 5
  • 7.
    And finally,  Precautionarystatement(s): means a phrase that describes recommended measures that should be taken to minimize or prevent adverse effects resulting from exposure to a hazardous chemical or improper storage or handling.  Name, address and phone number of the chemical manufacturer, distributor, or importer. 6
  • 8.
    SDS Labels  Informationon the label can be used to ensure proper storage of hazardous chemicals.  Information on the label might be used to quickly locate information on first aid when needed by employees or emergency personnel. 7
  • 9.
    What is onthe Pictogram?  Where a chemical has multiple hazards, different pictograms are used to identify the various hazards. You should expect to see the appropriate pictogram for the corresponding hazard class. And when there are similar precautionary statements, the one providing the most protective information will be included on the label. 8
  • 10.
    Pictograms  Pictogram: OSHA’srequired pictograms must be in the shape of a square set at a point and include a black hazard symbol on a white background with a red frame sufficiently wide enough to be clearly visible. A square red frame set at a point without a hazard symbol is not a pictogram and is not permitted on the label. OSHA has designated eight pictograms under this standard for application to a hazard. 9
  • 11.
    What does aGHS Pictogram look like? 10
  • 12.
    Health Hazards Classification Acute Toxicity –Contact by skin or ingestion produces adverse effects within 24 hrs. , or 4 hrs. by inhalation Can be one or more doses.  Skin Corrosion – irreversible damage to skin after up to 4 hrs. of contact  Skin Irritation – reversible damage to skin after up to 4 hrs. of contact  Serious eye damage - produces irreversible eye tissue damage in the eye within 21 hours of contact  Eye Irritation - production of reversible changes in the eye within 21 days of contact  Respiratory Sensitizer – induces hypersensitivity after inhalation  Skin Sensitizer – induces allergic reaction after contact 11
  • 13.
    Health Hazard Classifications (Cont) Carcinogen - induces or increases cancer incidence in the organism  Mutagen – affects the cells genetic material producing abnormal development of an organism  Reproductive- Toxicity - adverse effects on sexual function and fertility in adult males and females and even offspring development  Specific Target Organ Toxicity – Single Exposure One exposure damages or affects target organs to which the material is more attracted or compatible to.  Specific Target Organ Toxicity – Repeated Exposure Same as prior category but requiring multiple doses or exposures  Aspiration Hazard – damage caused by entry of a liquid or solid directly through the oral or nasal cavity, or into the lower respiratory system 12
  • 14.
    Current Label withQuick indicator markings 13 This diagram is numbered 1-4 with 4 being the highest level. White indicates the protective gear needed: for example, G means gloves and goggles.
  • 15.
  • 16.
  • 17.
    When placing SDSLabels, you must ensure visibility! 16
  • 18.
    What you needto know.  Know how to use the information on the label to ensure proper storage of hazardous chemicals.  Know how to use the information on the label to quickly locate information on first aid when needed by employees or emergency personnel. You are responsible for your general understanding of how the elements work together on a label. For example,  Where a chemical has multiple hazards, different pictograms are used to identify the various hazards. The employee should expect to see the appropriate pictogram for the corresponding hazard class. And when there are similar precautionary statements, the one providing the most protective information will be included on the label. 17
  • 19.
    Labels and SDSsheet should match  Every precautionary statement would be the same on the label and on the SDS. 18
  • 20.
    What else youneed to know  For example, you should know that with the new format, Section 8 (Exposure Controls/Personal Protection) will always contain information about exposure limits, engineering controls and ways to protect yourself, including personal protective equipment (PPE). 19
  • 21.
    Section 1- Identification Theformat of the 16-section SDS is the same as ANSI and should include the following sections:  Section 1. Identification: identifies the chemical on the SDS as well as the recommended uses. It also provides the essential contact information of the supplier.  Precautionary statement(s).  Description of any hazards not otherwise classified. 20
  • 22.
    Section 2- HazardIdentification  Section 2. Hazard(s) identification: identifies the hazards of the chemical presented on the SDS and the appropriate warning information associated with those hazards. The required information consists of:  The hazard classification of the chemical (e.g., flammable liquid, category1).  Signal word.  Hazard statement(s).  Pictograms (the pictograms or hazard symbols may be presented as graphical reproductions of the symbols in black and white or be a description of the name of the symbol (e.g., skull and crossbones, flame). 21
  • 23.
    Section 3- Composition/information on ingredients Identifies the ingredient(s) contained in the product indicated on the SDS, including impurities and stabilizing additives. This section includes information on substances, mixtures, and all chemicals where a trade secret is claimed. The required information consists of: Substances, Mixtures and Trade Secrets. 22
  • 24.
    Section 3- Substances Substances Chemicalname.  Common name and synonyms.  Chemical Abstracts Service (CAS) number and other unique identifiers.  Impurities and stabilizing additives, which are themselves classified and which contribute to the classification of the chemical. 23
  • 25.
    Section 3- Mixtures Mixtures  Same information required for substances.  The chemical name and concentration (i.e., exact percentage) of all ingredients which are classified as health hazards and are:  Present above their cut-off/concentration limits or  Present a health risk below the cut-off/concentration limits.  The concentration (exact percentages) of each ingredient must be specified except concentration ranges may be used in the following situations:  A trade secret claim is made,  There is batch-to-batch variation, or  The SDS is used for a group of substantially similar mixtures. 24
  • 26.
    Section 3, TradeSecrets Chemicals where a trade secret is claimed:  A statement that the specific chemical identity and/or exact percentage (concentration) of composition has been withheld as a trade secret is required. 25
  • 27.
    Section 4- FirstAid This section describes the initial care that should be given by untrained responders to an individual who has been exposed to the chemical. The required information consists of:  Necessary first-aid instructions by relevant routes of exposure (inhalation, skin and eye contact, and ingestion).  Description of the most important symptoms or effects, and any symptoms that are acute or delayed.  Recommendations for immediate medical care and special treatment needed, when necessary. 26
  • 28.
    Section 5 –FireFighting  This section provides recommendations for fighting a fire caused by the chemical. The required information consists of:  Recommendations of suitable extinguishing equipment, and information about extinguishing equipment that is not appropriate for a particular situation.  Advice on specific hazards that develop from the chemical during the fire, such as any hazardous combustion products created when the chemical burns.  Recommendations on special protective equipment or precautions for firefighters. 27
  • 29.
    Section 6- AccidentalRelease Accidental Release Measures  This section provides recommendations on the appropriate response to spills, leaks, or releases, including containment and cleanup practices to prevent or minimize exposure to people, properties, or the environment. It may also include recommendations distinguishing between responses for large and small spills where the spill volume has a significant impact on the hazard. The required information may consist of recommendations for:  Use of personal precautions (such as removal of ignition sources or providing sufficient ventilation) and protective equipment to prevent the contamination of skin, eyes, and clothing.  Emergency procedures, including instructions for evacuations, consulting experts when needed, and appropriate protective clothing. Methods and materials used for containment (e.g., covering the drains and capping procedures).  Cleanup procedures (e.g., appropriate techniques for neutralization, decontamination, cleaning or vacuuming; adsorbent materials; and/or equipment required for containment/clean up). 28
  • 30.
    Section 7- Handlingand Storage This section provides guidance on the safe handling practices and conditions for safe storage of chemicals. The required information consists of:  Precautions for safe handling, including recommendations for handling incompatible chemicals, minimizing the release of the chemical into the environment, and providing advice on general hygiene practices (e.g., eating, drinking, and smoking in work areas is prohibited).  Recommendations on the conditions for safe storage, including any incompatibilities. Provide advice on specific storage requirements (e.g., ventilation requirements). 29
  • 31.
    Section 8- ExposureControls and Personal Protection This section indicates the exposure limits, engineering controls, and personal protective measures that can be used to minimize worker exposure. The required information consists of:  OSHA Permissible Exposure Limits (PELs), American Conference of Governmental Industrial Hygienists (ACGIH) Threshold Limit Values (TLVs), and any other exposure limit used or recommended by the chemical manufacturer, importer, or employer preparing the safety data sheet, where available.  Appropriate engineering controls (e.g., use local exhaust ventilation, or use only in an enclosed system).  Recommendations for personal protective measures to prevent illness or injury from exposure to chemicals, such as personal protective equipment (PPE) (e.g., appropriate types of eye, face, skin or respiratory protection needed based on hazards and potential exposure). Any special requirements for PPE, protective clothing or respirators (e.g., type of glove material, such as PVC or nitrile rubber gloves; and breakthrough time of the glove material). 30
  • 32.
    Section 9- Physicaland Chemical Properties  The minimum required information consists of:  Appearance (physical state, color, etc.);  Upper/lower flammability or explosive limits;  Odor; Vapor pressure; Odor threshold; Vapor density;  pH; Relative density; Melting point/freezing point; Solubility(ies);  Initial boiling point and boiling range;  Partition coefficient: n-octanol/water;  Flash point; Auto-ignition temperature;  Evaporation rate; Decomposition temperature; and  Flammability (solid, gas); Viscosity. 31
  • 33.
    But not muchis listed on this SDS  The SDS may not contain every item on the above list because information may not be relevant or is not available. When this occurs, a notation to that effect must be made for that chemical property. Manufacturers may also add other relevant properties, such as the dust deflagration index (Kst) for combustible dust, used to evaluate a dust’s explosive potential. 9/10/2013 32
  • 34.
    Section 10- Reactivity Thissection describes the reactivity hazards of the chemical and the chemical stability information. This section is broken into three parts: reactivity, chemical stability, and other. The required information consists of: Reactivity  Description of the specific test data for the chemical(s). This data can be for a class or family of the chemical if such data adequately represent the anticipated hazard of the chemical(s),where available. 33
  • 35.
    Section 10 Chemical stability Indication of whether the chemical is stable or unstable under normal ambient temperature and conditions while in storage and being handled.  Description of any stabilizers that may be needed to maintain chemical stability.  Indication of any safety issues that may arise should the product change in physical appearance. 34
  • 36.
    Section 10 Other  Indicationof the possibility of hazardous reactions, including a statement whether the chemical will react or polymerize, which could release excess pressure or heat, or create other hazardous conditions. Also, a description of the conditions under which hazardous reactions may occur.  List of all conditions that should be avoided (e.g., static discharge, shock, vibrations, or environmental conditions that may lead to hazardous conditions).  List of all classes of incompatible materials (e.g., classes of chemicals or specific substances) with which the chemical could react to produce a hazardous situation.  List of any known or anticipated hazardous decomposition products that could be produced because of use, storage, or heating. (Hazardous combustion products should also be included in Section 5 (Fire-Fighting Measures) of the SDS. 35
  • 37.
    Section 11- ToxicologicalInformation  This section identifies toxicological and health effects information or indicates that such data are not available. The required information consists of:  Information on the likely routes of exposure (inhalation, ingestion, skin and eye contact). The SDS should indicate if the information is unknown.  Description of the delayed, immediate, or chronic effects from short- and long-term exposure.  The numerical measures of toxicity (e.g., acute toxicity estimates such as the LD50 (median lethal dose)) - the estimated amount [of a substance] expected to kill 50% of test animals in a single dose.  Description of the symptoms. This description includes the symptoms associated with exposure to the chemical including symptoms from the lowest to the most severe exposure.  Indication of whether the chemical is listed in the National Toxicology Program (NTP) Report on Carcinogens (latest edition) or has been found to be a potential carcinogen in the International Agency for Research on Cancer (IARC) Monographs (latest editions) or found to be a potential carcinogen by OSHA. 36
  • 38.
    Section 12- EcologicalInformation (non-mandatory) This section provides information to evaluate the environmental impact of the chemical(s) if it were released to the environment. The information may include:  Data from toxicity tests performed on aquatic and/or terrestrial organisms, where available (e.g., acute or chronic aquatic toxicity data for fish, algae, crustaceans, and other plants; toxicity data on birds, bees, plants).  Whether there is a potential for the chemical to persist and degrade in the environment either through biodegradation or other processes, such as oxidation or hydrolysis.  Results of tests of bioaccumulation potential, making reference to the octanol-water partition coefficient (Kow) and the bioconcentration factor (BCF), where available.  The potential for a substance to move from the soil to the groundwater (indicate results from adsorption studies or leaching studies).  Other adverse effects (e.g., environmental fate, ozone layer depletion potential, photochemical ozone creation potential, endocrine disrupting potential, and/or global warming potential). 37
  • 39.
    Section 13- DisposalConsiderations ( non-mandatory)  This section provides guidance on proper disposal practices, recycling or reclamation of the chemical(s) or its container, and safe handling practices. To minimize exposure, this section should also refer the reader to Section 8 (Exposure Controls/Personal Protection) of the SDS.  The information may include:  Description of appropriate disposal containers to use.  Recommendations of appropriate disposal methods to employ.  Description of the physical and chemical properties that may affect disposal activities.  Language discouraging sewage disposal.  Any special precautions for landfills or incineration activities. 38
  • 40.
    Section 14- TransportInformation (non-mandatory) This section provides guidance on classification information for shipping and transporting of hazardous chemical(s) by road, air, rail, or sea. The information may include:  UN number (i.e., four-figure identification number of the substance).  UN proper shipping name.  Transport hazard class(es).  Packing group number, if applicable, based on the degree of hazard.  Environmental hazards (e.g., identify if it is a marine pollutant according to the International Maritime Dangerous Goods Code (IMDG Code)).  Guidance on transport in bulk (according to Annex II of MARPOL 73/783 and the International Code for the Construction and Equipment of Ships Carrying Dangerous Chemicals in Bulk (International Bulk Chemical Code (IBC Code)).  Any special precautions which an employee should be aware of or needs to comply with, in connection with transport or conveyance either within or outside their premises. 39
  • 41.
    Section 15- RegulatoryInformation (non-mandatory)  This section identifies the safety, health, and environmental regulations specific for the product that is not indicated anywhere else on the SDS. The information may include:  Any national and/or regional regulatory information of the chemical or mixtures (including any OSHA, Department of Transportation, Environmental Protection Agency, or Consumer Product Safety Commission regulations). 40
  • 42.
    The non OSHAregulated sections 41 Section 12. Ecological information Section 13. Disposal considerations Section 14. Transport information Section 15. Regulatory information In regard to Sections 12-15; OSHA does not regulate these areas, they concern matters handled by other agencies. These sections are however, required by the GHS.
  • 43.
    Section 16- OtherInformation  This section indicates when the SDS was prepared or when the last known revision was made.  The SDS may also state where the changes have been made to the previous version. You may wish to contact the supplier for an explanation of the changes. Other useful information also may be included here. 42
  • 44.
    Summary of SDS Section 1: Identification  Section 2: Hazard(s) Identification  Section 3: Composition/Information on Ingredients  Section 4. First-Aid measures  Section 5. Fire-fighting measures  Section 6. Accidental release measures  Section 7. Handling and storage  Section 8. Exposure controls/personal protection 43
  • 45.
    SDS summary (cont.) Section 9. Physical and chemical properties  Section 10. Stability and reactivity  Section 11. Toxicological information  Section 12. Ecological information (non- mandatory)  Section 13. Disposal considerations (non- mandatory)  Section 14. Transport information (non- mandatory)  Section 15. Regulatory information (non- mandatory)  Section 16. Other information, including date of preparation or last revision 44
  • 46.
    Summary of Labels Name, Address and Telephone Number  Product Identifier  Signal Word  Hazard Statement(s)  Precautionary Statement(s)  Pictogram(s) 45
  • 47.
    Part 7 ofthe HAZCOM plan  Hazard Assessment: what is our risk level onsite?  Develop a written HAZCOM Plan to meet that risk: A written plan should include lists of hazardous chemicals present; labeling of containers of chemicals in the workplace, as well as of containers of chemicals being shipped to other workplaces; preparation and distribution of safety data sheets to employees; and development and implementation of employee training programs regarding hazards of chemicals and protective measures.  Appointment of a HAZCOM Coordinator  Conduct the chemical inventory  Initiate labeling requirements  Maintain the MSDS/SDS library  Establish employee training 46

Editor's Notes

  • #11  Environmental pictogram is not recognized by OSHA but may be in use