Ps600 c-sj5-8

Ps600 c-sj5-8

• 1.
  Head max. 30m Flow rate max. 6.5 m³/h Controller PS600 Control inputs for dry running protection, remote control etc. Protected against reverse polarity, overload and overtemperature Integrated MPPT (Maximum Power Point Tracking) Battery operation: Integrated low voltage disconnect Power max. 0.70 kW Input voltage max. 150 V Optimum Vmp** > 68 V Nominal voltage (battery operation) 48 V Motor current max. 13 A Efficiency max. 98 % Ambient temp. -30...50 °C Enclosure class IP65 Motor ECDRIVE 600-C Maintenance-free brushless DC motor Water filled Premium materials, stainless steel: AISI 304/316 No electronics in the motor Rated power 0.7 kW Efficiency max. 92 % Motor speed 900...3,300 rpm Insulation class F Enclosure class IP68 Submersion max. 150 m Pump End PE C-SJ5-8 Non-return valve Premium materials, stainless steel: AISI 304 Optional: dry running protection Centrifugal pump Standards 2006/42/EC, 2004/108/EC, 2006/95/EC IEC/EN 61010-1:2010, IEC 62103:2003, IEC/EN 60034-1:2010, IEC/EN 60335-2-41:2003+A1+A2, IEC/EN 60335-1:2012, EN 62233:2008 IEC/EN 61000-6-4:2007+A1, IEC/EN 61000-6-2:2005 IEC/EN 61702:1995, IEC/EN 62253 Ed.1 The logos shown reflect the approvals that have been granted for this product family. Products are ordered and supplied with the approvals specific to the market requirements. Pump Unit PU600 C-SJ5-8 (Motor, Pump End) Borehole diameter min. 4,0 in Water temperature max. 50 °C Technical Data System Overview * PS DataModule is included in all PSk2 controllers and any PS controllers with D in their description. D variants should be ordered if there is a potential need to use the PS DataModule features in the future as this is not a retrofit option. **Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature PS DataModule Integrated Data Logger and advanced pump management features. Allows for simple system configuration, real-time and stored data plus provides Bluetooth communication to PumpScanner Android App and PS Communicator.* BERNT LORENTZ GmbH & Co. KG Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de Created by LORENTZ COMPASS 3.1.0.62 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations. Solar Submersible Pump System for 4" wells PS600 C-SJ5-8
• 2.
  H = H2 = W1= W2 = W3 = D = D1 = 396 mm 364 mm 178 mm 156 mm 116 mm 165 mm 150 mm Controller A = B = C = D = E = S = 524 mm 185 mm 339 mm 96 mm 98 mm 1.5 in Pump Unit Net weight Controller 4.5 kg Pump Unit 11 kg Motor 7.0 kg Pump End 4.2 kg *Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature Dimensions and Weights Pump Chart Vmp* > 68 V BERNT LORENTZ GmbH & Co. KG Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de Created by LORENTZ COMPASS 3.1.0.62 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations. Solar Submersible Pump System for 4" wells PS600 C-SJ5-8