Refuse disposal i

Refuse disposal i

• 1.
  Refuse Disposal The sightof a dustbin overflowing and the stench rising from it, the all too familiar sights and smells of a crowded city. You look away from it and hold your nose as you cross it. Have you ever thought that you also have a role to play in the creation of this stench? That you can also play a role in the lessening of this smell and making this waste bin look a little more attractive if you follow proper methods of disposal of the waste generated in the house? 1
• 2.
  Since the beginning,humankind has been generating waste, be it the bones and other parts of animals they slaughter for their food or the wood they cut to make their carts. With the progress of civilization, the waste generated became of a more complex nature. At the end of the 19th century the industrial revolution saw the rise of the world of consumers. Not only did the air get more and more polluted but the earth itself became more polluted with the generation of no biodegradable solid waste. The increase in population and urbanization was also largely responsible for the increase in solid waste. 2
• 3.
  Each household generatesgarbage or waste day in and day out. Items that we no longer need or do not have any further use for fall in the category of waste, and we tend to throw them away. There are different types of solid waste depending on their source. In today’s polluted world, learning the correct methods of handling the waste generated has become essential. Segregation is an important method of handling municipal solid waste. Segregation at source can be understood clearly by schematic representation.One of the important methods of managing and treating wastes is composting. As the cities are growing in size and in problems such as the generation of plastic waste, various municipal waste treatment and disposal methods are now being used to try and resolve these problems. One common sight in all cities is the rag picker who plays an important role in the segregation of this waste. 3
• 4.
  Types of solidwaste •Domestic: includes ashes, food, paper, bottles, tins, rags, hairs, cardboard, rubber. Household waste is generally classified as municipal waste, Commercial: waste papers, office stationary catering waste and cartons •Industrial: : includes various waste materials produced by industries, some of which may be toxic, offensive and dangerous. Some of the waste may be salvageable and valuable; for example, metal waste may be melted down and ire-used. •Medical waste: Cottons pads, blood, pieces of organs, bones, pieces of flesh, skins, syringes, plastics bottles, etc. Municipal solid waste consists of household waste, construction and demolition debris, sanitation residue, and waste from streets. This garbage is generated mainly from residential and commercial complexes. With rising urbanization and change in lifestyle and food habits, the amount of municipal solid waste has been increasing rapidly and its composition changing. In 1947 cities and towns in India generated an estimated 6 million tonnes of solid waste, in 1997 it was about 48 million tonnes. More than 25% of the municipal solid waste is not collected at all. 4
• 5.
  The type oflitter we generate and the approximate time it takes to degenerate Type of litter Approximate time it takes to degenerate the litter Organic waste such as vegetable and a week or two. fruit peels, leftover foodstuff, etc. Paper 10–30 days Cotton cloth 2–5 months Wood 10–15 years Woolen items 1 year Tin, aluminium, and other metal items 100–500 years such as cans Plastic bags one million years? Glass bottles undetermined 5
• 6.
  Generation and storageof waste Door-to-door collection of waste is another method of segregation, but it is not a common practice as yet in India except in the metros where some private organizations are doing such work. The rag picker plays a very important part in the segregation of waste. It is now becoming more and more essential to look for methods by which the garbage load on the land can be reduced. It has been seen that at present segregation of waste at source level seems to be the best. Segregation of waste Waste can be segregated as 1. Biodegradable and 2. Nonbiodegradable. Biodegradable waste include organic waste, e.g. kitchen waste, vegetables, fruits, flowers, leaves from the garden, and paper. Nonbiodegradable waste can be further segregated into: a) Recyclable waste – plastics, paper, glass, In Indian context the average waste metal, etc. generated is 250 Gms/Day/Person. b) Toxic waste – old medicines, paints, chemicals, bulbs, spray cans, fertilizer and But it also varies from the locality pesticide containers, batteries, shoe polish. c) Soiled – hospital waste such as cloth soiled density and the type of society. with blood and other body fluids. Toxic and soiled waste must be disposed of (Higher /middle/ low) with utmost care. 6
• 7.
  7
• 8.
  Storage Collection systemand disposal • Bins • Sacks • Skips • Refuse chutes • Garchey system • Sink grinders • Central sugs 8
• 9.
  Storage • The storing of refuses until collection in disposable plastic or paper bags is becoming increasingly more popular and is generally more hygienic than storing refuse in a metal dustbin. The re-use of bags is not considered acceptable from the hygienic point of view and the bags are therefore disposed of with the refuse. Bags can be used as liners for metal bins and this is probably the most hygienic method of storing refuse. Disposal of waste from building Refuse chutes In high-rise flats it is not practical or hygienic to carry dustbins or bags down to the ground floor for subsequent collection. A method of overcoming this problem is to provide a refuse chute carried vertically through the building, with an inlet hopper on each floor. The hoppers must be designed to close the chute when they are opened to receive refuse, or otherwise people on the lower floors might be covered with refuse from above when they put their own refuse into the hopper. This type of hopper also prevents dust, smoke and smells from passing through to the floors. 9
• 10.
  10
• 11.
  Planning There may bemore than one chute in a building and these discharge into a refuse container, or an incinerator, inside specially constructed chambers. Refuse chutes should be sited on well-ventilated landings,balconies or adjacent to the kitchens and storage spaces. It should not be sited in a kitchen. For sound insulation, any wall separating a refuse chute away from a habitable room Washing down facilities may be provided for the chute by means of a dry riser with jet heads fitted inside the chute at each floor level. Some authorities, "However, hold that bacteria breed more readily in the presence of water and therefore washing down of chutes should be avoided. Users should be advised to wrap the refuse in order to prevent soiling of the chute. A chute can be arranged to discharge into two bins" by bifurcating the end with a cut-off damper, operated by a caretaker when one is filled. A special machine may also be used, which automatically compresses the refuse into the bags. Ventilation The chute should be ventilated by means of pipe. The ventilator should be of non combustible material. 11
• 12.
  Materials Refuse chutes shouldbe of non-combustible and acid-resistant materials. Glazed stoneware, spun concrete or asbestos cement pipes may be used. Hoppers should also be made of non-combustible materials not subject to corrosion or abrasion. Hoppers are manufactured from cast iron, wrought and cast aluminum and steel. Steel hoppers are galvanized and cast iron hoppers painted. Chambers Refuse storage chambers must be surrounded by floors and walls, with at least 1 hour fire rating. Surface finishes must be non-combustible, moisture- proof and easy to clean. A 1/2-hour fire rating lockable, dust and fume-proof door must be provided and the floor must be laid to falls to an external trapped gully. A tap should be fitted outside, so that the chambers can be hosed down. To reduce noise, the chambers should be structurally isolated from the rest of the building, by means of double walls or separate floor slabs. 12
• 13.
  • Garchey system • The system was invented by a Frenchman, M. Louis Garchey, and has been improved by a British company. The original French system required under-ground suction pipe work and a central incinerator plant, which increased the capital and running costs of the system. The new improved British system uses a refuse-collection vehicle, which replaces the underground suction pipe work and central incinerator plant. The vehicle is much cheaper and can receive 7 days refuse from over 200 flats, virtually serving an entire housing estate in one day or night shift of about 2-1/2 hours. Whilst the system is particularly suitable for high-density multi-storey flats, especially if it is installed whilst building work is in progress, it can also be installed in existing buildings, including single-storey dwellings. 13
• 14.
  14
• 15.
  • In the system a special sink has a grid and waste plug, which fits over the outlet and this enables the sink to be used for normal purposes. To deposit refuse, the housewife lifts off the sink grid and places the refuse in a waste tube. In order to remove the refuse, the grid lifts the tube and the refuse, together with retained wastewater, are carried through a trap into a vertical stack pipe. A concrete collection chamber below ground receives the refuse and wastewater and the chamber is emptied by the refuse vehicle at regular intervals, usually weekly, and taken directly to a tip. Any type of refuse can be handled by the system, including bottles and tins, providing that these will fit inside the tube. Larger items, however, must be taken to a communal container and collected in the normal manner. The collection vehicle • It includes-a patented pusher plate, which compresses the refuse inside a cylindrical tank. Advantages • The system has proved satisfactory and popular with the user and, unlike the refuse chute, the refuse can be removed without taking it to a landing or balcony. The refuse is taken directly from the kitchen sink, to the tip, through an enclosed water-sealed system and it is therefore more hygienic than the chute and there is less risk of fire spread. The refuse collection is easier, quicker, and quieter and the damp refuse 15 does not cause spread of dust at the tip.
• 16.
  • Sink grinders •Several types of sink grinders are available, which are used mainly for the disposal of food waste, but cannot be used for metals, plastics, ceramics or string. The grinder, which is fitted under the sink, reduces the food waste to fine particles, which can be carried away by the wastewater to the foul water drain. • Safety • It should be impossible for the users to insert his or her fingers into the shedding compartment and blockages should not be freed by hand. 16
• 17.
  17
• 18.
  Transportation and disposal •Generally transported by municipal trucks. • Disposal • Incineration • Composting to produce manure • Recycle after segregation. • Land reclamation. Key words to reduce the waste Recycling and reuse Recycling involves the collection of used and discarded materials processing these materials and making them into new products. It reduces the amount of waste that is thrown into the community dustbins thereby making the environment cleaner and the air more fresh to breathe. 18