NN
Uploaded bynorazlan mohd noor
927 views

Resume NMN 5b _3_

Norazlan bin Mohd Noor provides a summary of his qualifications and experience. He has over 18 years of experience in mechanical, piping, and commissioning engineering. He has worked on numerous offshore oil and gas projects in Malaysia and holds qualifications in mechanical engineering and project management.

Embed presentation

Download to read offline
NORAZLAN BIN MOHD NOOR 1.0) BIODATA Address Age Date of Birth No. 27, Jalan Nakhoda 16, Taman Tun Aminah, 81300 Skudai, Johor Bahru, Johor. 40 Years 31 December 1974 Contact No. 012-7400 307 07-557 4055 012-7400308 Nationality Malaysian Religion Islam Maritial Status Married E-Mail norazlan1974@yahoo.co.uk 2.0) EDUCATION 1992 – 1995 UNIVERSITI TEKNOLOGI MALAYSIA, SKUDAI, JOHOR. Diploma in Mechanical Engineering. 2005-2007 UNIVERSITI TEKNOLOGI MALAYSIA SKUDAI, JOHOR. Executive Certificate in Project Management. 2009-2012 KUALA LUMPUR INTERNATIONAL UNIVERSITY Bachelor in Mechanical Engineering (With Hons.)
3.0) CAREER OBJECTIVE To be an excellence in Management and Technical through Project, Safety and Quality with opportunities in future advancement. 4.0) SUMMARY OF WORK EXPERIENCES a) Extensive experience in the field of Mechanical / Piping / Commissioning Engineering for 18 years designated as an Engineer in Safety Health and Occupational executive cum Testing & Commissioning which covers EPC, EPCC and EPCIC project. b) Attached as a Lead Commissioning for Hook-up and Commissioning for Onshore / Offshore which includes Safety Assessment, Quality, Scope of Work in Contract, Planning and Scheduling, Job Safety Analysis (JHA), Engineering, Bidding and Tendering and Final Documentation for projects involved. HIRARC member for establishing the risk assessment. c) Familiar with the Standard Specification and Design Practice such as Petronas Technical Standard (PTS), Detailed Engineering Procedure (DEP), Standard Engineering Specification (SES), Standard Engineering Guidelines (SEG), Standard Engineering Procedure (SEP), American Society of Mechanical Engineers (ASME), American Petroleum Institute (API), American Standard Testing Material (ASTM) and British Standard (BS). 4.1) ROLE AND DUTIES a) Incorporate provisions in-line with design and construction data prior execution of pre- commissioning and testing activities. b) Review and provide all execution plans, schedules, resources allocation, test procedures and final documentation for sub-ordinates and contractors. c) Interface and coordinate with discipline construction field engineers pertaining construction mechanical completion and pre-commissioning, testing and commissioning works. d) Supervise and monitor pre-commissioning, testing and commissioning activities of all plant/facilities mechanical and piping systems.
e) Liaise and coordinate with other discipline Commissioning Engineer and Supervisors with regards with system interface and testing involved. e) Ensure all mechanical and piping commissioning works are carried out as described in onshore and offshore commissioning procedures / manual / acceptance criteria, as well as the Engineering Management System - Construct and Pre-commission Facilities Procedure & Commission and Facilities Handover Procedure. f) Ensure all completeness and accuracy for system handover prior implementation the project completion management system. g) Comply and well versed in performing technical bid analysis and participate in Factory Acceptance Test (FAT) when requested. Capable to interface with other discipline related with issues arises and coordinate test with other discipline as required. h) Generate and supervise commissioning related punch-lists and other outstanding works. i) Facilitate and govern system safe start-up and subsequent facilities handover to asset holder. j) Supporting Lead Commissioning Engineer (LCE) comprises planning, work pack reviews, preparing daily commissioning report and interface with discipline, fabrication, hook-up engineers on site issues. Capable to solve and recommendation thru resolving the demonstrate team work. k) Ensuring all work-pack preparation involving hydro-test preparation and re- instatement leak test packages. l) Prepare Commissioning system boundaries, commissioning plan and commissioning priorities. 4.2) RESPONSIBILITIES a) Make sure all plant involved in mechanical and piping system have been correctly hooked up with appropriate construction check sheet completed and sign off. b) Ensure all the construction and pre-commissioning checks are witnessed and satisfactory. c) Coordinate receiving, inspection and testing of commissioning materials and equipment and ensure that all are in accordance with order / contact prior to receipt
and/or acceptance by the Company involved. d) Liaise with subordinates, contractors and facilitate vendor on execution of pre- commissioning and commissioning activities. e) To make sure the accuracy and completeness of the "As-Built" drawings as well as perform "red line mark-up. f) To carried out and ensure pre-commissioning, testing and commissioning works in safely manner, in accordance with Company standards and procedures and project specifications and acceptance criteria are meet. g) Knowledgeable and well verse in demonstrate and utilize mechanical testing and commissioning tools and equipments. h) Spearhead site flushing and pressurization test as well as hydro test, inclusive for the cleanest of the piping system prior to start-up. i) Capable in supervising and arranging site team or a team of commissioning technicians. j) Coordinate Hook-Up and Commissioning (HUC) contractor and ensure plan developed is in line with Commissioning Strategy. k) Well verse in dealing with Project Completion Management System such as CCMS or equivalent. l) Technically gained hands on experience pre-commissioning and commissioning comprises of:- i) Static equipment such as tanks / pressure vessels, re-boilers, heat exchangers, air/gas cooler, heat recovery system, etc. ii) Rotating equipment such as positive displacement pumps / compressors. iii) Centrifugal pumps iv) Mechanical equipment packages such as turbine compressors, turbine / diesel generators, instrument air compressors and dryers, chemical injection system, etc. v) Material handling such as pedestal crane, jib crane, gantry crane, overhead crane, monorail trolley hoist, etc. f) Familiar with piping system pre-commissioning works such as flushing and cleaning, hydro testing, P&ID line walk, reinstatement leak test, etc. Able to prepare hydro test and reinstatement leak test procedure/packages and spading / isolation plans and have hands on experience in leading reinstatement leak test works, experience in using Nitrogen/ Helium method. g) Knowledgeable in control and measurement philosophies, which comprises
commissioning, start-up, HSSE matters and operational requirements. h) Knowledge in piping size and materials, liquid/gas transmission system prior meeting process requirements. i) Capable in communication, interpersonal and leadership / influencing skills. j) Computer literate and proficient in MS Office, familiar with Project Completion System i.e. CCMS or similar software is preferred. k) Obtained and attended Job Hazard Analysis (JHA), Permit to Work (PTW) and Sea Survival trainings with valid certificates. l) Work out with Check sheet and checklist, Check sheet overview, Job card, Variation Order (VO), Piping and Instrumentation Diagram (P&ID) Utility Flow Diagram (UFD), Process Flow Diagram (PFD), Isometric, Piping Schedule, Cable Schedule, Tie-ins for Hook-up Drawings and Design Drawings. m)Computer literate using Microsoft Words, Microsoft Excel, Microsoft Project, Microsoft Power Point, Microsoft Access. 5.0) WORKING EXPERIENCES Project F14/F29 Field Development Project Employer Sarawak Shell Berhad Duration January 2013 - Present Position Mechanical / Piping / Commissioning Engineer Description To commission static and dynamic equipment for F14 DR-A facilities and Host Tie-Ins to F23R-A which contribute 300 mmscfd and 150 mmscfd for both F14 and F29 respectively. Consist of Slug Catcher 3 phase and 2 phase, Launcher and Receiver, Material Handling, Metering Gas and Condensate, Corrosion Inhibition System, Methanol Injection System, Power Generation System and Utilities. Project M3 TMM and TIR Project Employer Sarawak Shell Berhad Duration December 2012 - January 2013 Position Mechanical Commissioning Engineer Description To do reinstatement leak test for up-grading piping and valves change- out for introduction of Hydrocarbon and Condensate to the existing facilities.
Project M1 Well Clean-Up and Start-Up Employer Sarawak Shell Berhad Duration Nov 2012 – December 2012 Position Mechanical Commissioning Engineer Description To do reinstatement leak test for Choke Valve, Christmas Tree and Production Header with associated piping and valves for introduction of Hydrocarbon and Condensate to the existing facilities. Project E11 Dessander Up-Grading Employer Sarawak Shell Berhad Duration Sept 2012 – Oct 2012 Position Mechanical Commissioning Engineer Description To do reinstatement leak test for Water Dessander associated piping and valves for introduction of Hydrocarbon and Condensate to the existing facilities. Project F6 - F28 Gas Development Project Employer Sarawak Shell Berhad Duration July 2012 – August 2012 Position Mechanical Commissioning Engineer Description To do reinstatement leak test for Slug Catcher, Gas Metering, Gas Receiver and associated piping and valves for introduction of Hydrocarbon and Condensate to the existing facilities. Project St. Joseph PYROBAN IC Engine Up-grading and TIR CI Skid Employer Sarawak Shell Berhad Duration April 2012 – June 2012 Position Mechanical Commissioning Engineer Description To upgrading the IC engine of Air Intake, Turbo Charger, Flame Arrestor, Panels and associated cables for instrument and electrical. To commission the PPD and Demulsifier for SJJT-A, SJJT-B, SJJT-F, SJJT- G, SJJT-H.
Project F6 DEM 2 Upgrading Employer Sarawak Shell Berhad Duration January 2012 – March 2012 Position Mechanical Commissioning Engineer Description Piping change-out for the VL line inclusive of orifice plate. Project BIF Small Compact Prover Employer Sarawak Shell Berhad Duration August 2011 – December 2011 Position Mechanical Commissioning Engineer Description Start-up and commissioning for the Small Compact Prover inclusive of 2 nos. of Condensate Recirculation Pump P-490 and P-500. On top of that, review and execute hydrotest according to the package given and run the reinstatement leak test for the whole system prior free from leak and ready for introduction of hydrocarbon. Project E8 KA and F13 KA Compression Module Employer Sarawak Shell Berhad Duration Jun 2011 – July 2011 Position Mechanical Commissioning Engineer Description Responsible for assuring the mechanical static and dynamic equipment is fully commission accordingly for both compression module. Comprises 2 nos. of turbine compressor which inclusive of monorail trolley hoist, air compressor, inlet separator, HVAC, potable fire fighting system and diesel fuel system. Project LCOT New Furnace F-104 Employer Sarawak Shell Berhad Duration March 2011 – May 2011 Position Mechanical Commissioning Engineer Description Coordinate the commissioning activities for start-up the new furnace F- 104, Labuan Crude Oil Terminal and miscellaneous equipment such as Blower B-104, Fuel Gas System, Instrument Air System, Emulsion and Wax system and Closed Drain System.
Project M1 Condensate Recovery Pump Employer Sarawak Shell Berhad Duration December 2010 – February 2011 Position Mechanical Commissioning Engineer Description Alignment the coupler for the vertical pump with electric driven motor engine and run the pump respectively. Reinstatement leak test to the existing line at Train A. Project F6 Rejuvenation for New Diesel Fire Water Pump Employer Sarawak Shell Berhad Duration October 2010 – November 2010 Position Mechanical Commissioning Engineer Description Change out the New Diesel Fire Water Pump at F6 using the DITA 3412 Caterpillar engine, alignment and soft foot check, test run the engine for functional check and do the reinstatement for the Fire Water Line. Project Replacement of Glycol Heater Bundles at M1 Employer Sarawak Shell Berhad Duration Jun 2010 – September 2010 Position Mechanical Commissioning Engineer Description To change the thyristor heating element, install all the relevant SPWD gasket, sequence bolt tensioning and final closure the 2 unit vessel V- 9540 and V-9640. Project HVAC Improvement Project for SJP-A Employer Sarawak Shell Berhad Duration February 2010 – May 2010 Position Mechanical Commissioning Engineer Description Commissioning the ACCU and AHU and all associated piping and ducting to deliver the positive pressure as per standard.
Project Glycol Rewetted Circulation Pump at M3 Complex. Employer Sarawak Shell Berhad Duration December 2009 – January 2010 Position Mechanical Commissioning Engineer Description Commission the Rewetted Glycol Pump for alignment, polarity check and functional check. Project B11-PC4 HTI Hook-up and Commissioning Employer Sarawak Shell Berhad Duration July 2009 – Nov 2009 Position Mechanical Commissioning Engineer Description Host Tie Ins (HTI) from PC4 Carigali to B11 (Shell) for all the static equipment such as Suction Scrubber, Gas Filter, Activated Carbon, Condensate Pump, Metering for Condensate and Gas and all associated piping and valves. Project TIR Chemical Injection Package for SJJT-A/B/F/G/H Employer Sarawak Shell Berhad Duration May 2009 – Jun 2009 Position Mechanical Commissioning Engineer Description To commission the Chemical Injection Pump for P-9810 A/B) for all the satellite platform in St Joseph Field. Project Labuan Crude Oil Terminal (LCOT) Employer Sarawak Shell Berhad Duration February 2009 – April 2009 Position Mechanical Commissioning Engineer Description To install and commission the New Furnace (F-104) with associated equipment such as the Fuel Gas Skid, Heater, Fan Blower (B-104) and all relevant reinstatement leak test.
Project LLP Compressor for South Furious Project Employer Sarawak Shell Berhad Duration December 2008 – January 2009 Position Mechanical Commissioning Engineer Description To commission all the static and dynamic equipment for the integrated to the existing equipment for Low Low Pressure Compressor. Final Closure Main Scrubber and Pre-Filter, Monorail Trolley Hoist, Alignment the Booster Pump and reinstatement leak test for all gas line. Employer National Institute of Occupational Safety and Health (NIOSH JB) Duration January 2008 –December 2008 Position Executive NIOSH Safety, Health and Environment. Description To coordinate all the related Safety and Health training and work passport. To support Branch Manager for administration works. Teach safety class according to the program. A comprehensive legislation frame work and practical assessment for the SHO participant. Project PC-4 DRILLING PLATFORM Client Petronas Carigali Sdn. Bhd. (PCSB) Duration March 2007 –December 2007 Position Coordinator Testing and Commissioning cum Safety and Health Advisor Malaysia Marine and Heavy Engineering Sdn Bhd. (MMHE) Description The satellite platform located at SK309 Sarawak, East Malaysia. Generally it is a gas platform hub connect to the B11 DR-A for tie-ins purpose before launch to MCOT. Project LEDANG ANOA DRILLING PLATFORM Client Petronas Carigali Sdn. Bhd. (PCSB) Duration September 2005 –February 2007 Position Lead Mechanical / Piping / Commissioning Engineer. Malaysia Marine and Heavy Engineering Sdn Bhd. (MMHE) Description The unmanned satellite platform with the fast track record to be delivered by the end of February 2006, consist of Process, Process Utilities, General Utilities, Safety Equipment, Power, Instrument and Control and Miscellaneous equipment. The above said system need to be testing and
pre-commissioning parallel with the safety awareness program to achieve the TRCF and LTI – 0. References Mr. Haji Pungut (Drilling Supervisor – PCSB Company man) Mr. Paul de Koning (Barge Supervisor – ENSCO 52) Project E11 LIVING QUARTERS Client Sarawak Shell Berhad Duration (November 2004 –August 2005) Position Lead Commissioning Coordinator. Malaysia Marine and Heavy Engineering Sdn Bhd. (MMHE) Description This project is for rejuvenation and upgrading for Heli-deck and Living Quarters for 80 mans as an extension for the existing module in E11 Block in Sarawak Sea. My task is to coordinate the planning, scheduling, final documentation, SPIR – Spare part listing, vendor and client requirements, punch listing and etc. My correspondence is act as a middleman between management and direct manpower including with the client. The major equipment involved are the Pedestal Crane 6.0 MT, HVAC with 2 unit ACCU and 2 Unit AHU, 2 Brucker Capsule with capacity of 80 man each, Potable water skid comprises a 2 unit pump with 12.5Kw and Potable water tank, Fire Fighting Equipment for potable and Fixed equipment. Project BUNGA KERTAS FPSO EPCC Client Malaysia International Shipping Corporation Duration Duration: (November 2002 –November 2004) Position Lead Commissioning Coordinator. Malaysia Marine and Heavy Engineering Sdn Bhd. (MMHE) Description The project is defined as the flotation facilities for offshore sewage and offloading the H2S for merchandise ship especially for tanker ship. The ship have 6 module that is module 1- Power Generation, Module 2- Gas Compression, Module 3- Metering Skid, Module 4 – Facilities, Module 5 – Crude Stabilization Unit, and Module 6 – Knock Off Flare.
Project LARUT CCP PLATFORM Client ESSO Production Malaysia Inc Duration (August 2000 – August 2001) Position Lead Commissioning Coordinator. Malaysia Shipyard and Engineering Sdn Bhd. (MSE) Description Exxon Mobil mother platform is weighted at 8900 DWT is totally a process platform comprises a dehydration module, power generation module, utility module, Living Quarters module, MSF module Chemical Injection Module, Water Injection Module and Knock Out Module Project GUNTONG-D, MODULE 5 Client ESSO Production Malaysia Inc. Duration ( Jun 1999- August 2000) Position Lead Commissioning Coordinator. Malaysia Shipyard and Engineering Sdn Bhd. (MSE) Description A Dehydration Module for Guntong –Delta field. The objective of this system is to dehydration the sweet gas to transform to sour gas for export to the other field via slug catcher at KSB. The equipment involved is the Thyristor panel for Re-boiler, Hot Oil Circulation Pump, Satellite Separator Vessel, Tote Tank for TEG Liquid. Project Client Duration BIRWELCO BLOWER FAN Singapore Fired Heaters ( Jun 1999) Position Mechanical Commissioning Engineer. Malaysia Shipyard and Engineering Sdn Bhd. (MSE) Description The fired heaters is to facilitate the gas at Pulau Air Cawan in Singapore. The facilities are to generate the gas for power generation to Singapore Energy Board. Project Client Duration BLASTING POT HYDROTEST Malaysia Shipyard And Engineering (May 1999 ) Position Mechanical Commissioning Engineer. Malaysia Shipyard and Engineering Sdn Bhd. (MSE) Description The above equipment is provided to utilize for painting works at the yard. The objective to hydro test the Pot for the operating pressure at the approximately 7 to 13 psig. Fill-up check sheet for initial and approval.
Project Client Duration BUFFALO FSO TURRET HEAD SOFEC Inc. (April 1999 – May 1999 ) Position Mechanical Commissioning Engineer. Malaysia Shipyard and Engineering Sdn Bhd. (MSE) Description The turret is the large bearing for stationed the FSO at the sea. It is anchor by 6 big chains for located the West Africa. Project Client Duration F23 K-A COMPRESSION MODULE Sarawak Shell Berhad ( SSB ) ( January 1999 – April 1999 ) Position Mechanical Commissioning Engineer. Malaysia Shipyard and Engineering Sdn Bhd. (MSE) Description Gas Compression Module comprises two trains of Turbo Compressor for gas compression and fuel gas facilities to the other module. The starter unit is using the hydraulic power pack and motor electric unit. The Turbo compressor is also using diesel incase of black start or emergency purpose. Other equipment are Pedestal Crane, Monorail Trolley Hoist, HVAC, Potable Water Pump, Diesel Fuel Pump and Etc. Project Client Duration 3 BAYS AIR COOLED HEAT EXCH Petronas Ammonia Sdn. Bhd. ( December 1998 ) Position Mechanical Commissioning Engineer. Malaysia Shipyard and Engineering Sdn Bhd. (MSE) Description The heat exchanger is a Force Draft for exchanging heat. The facilities involved are the motor electric and fan, the tube heat exchanger, louvers, and bearing system. Project Client Duration 18 BAYS AIR COOLED HEAT EXCH Propane Dehydration (October 1998 – November 1998) Position Mechanical Commissioning Engineer. Malaysia Shipyard and Engineering Sdn Bhd. (MSE) Description The heat exchanger is a Force Draft for exchanging heat. The facilities involved are the motor electric and fan, the tube heat exchanger, louvers, and bearing system.
Project Client Duration BENCHAMAS FSO Single Buoy Mooring Inc. USA ( August 1998 – September 1998 ) Position Mechanical Commissioning Engineer. Malaysia Shipyard and Engineering Sdn Bhd. (MSE) Description The turret is the large bearing for stationed the FSO at the sea. The facilities involved are the Monorail Trolley Hoist, Power Pack Unit, Tubing unit for lubrication system, Fire Fighting System. Project Client Duration TRENERGY FPSO TURRET SOFEC Inc. USA ( Jun 1998 – July 1998 ) Position Mechanical Commissioning Engineer. Malaysia Shipyard and Engineering Sdn Bhd. (MSE) Description The turret is the large bearing for stationed the FSO at the sea. The facilities involved are the Monorail Trolley Hoist, Power Pack Unit, Tubing unit for lubrication system, Fire Fighting System. Project Client Duration ANDING –A PLATFORM Petronas Carigali Sdn. Bhd. ( Mac 1998 – Jun 1998 ) Position Mechanical Commissioning Engineer. Malaysia Shipyard and Engineering Sdn Bhd. (MSE) Description The tripod legged satellite platform is produce to abstract gas from Terengganu Field at MASA Oil Field. The facilities applicable at the platform are the Jib Crane, Potable water Tank, Tote tank, Closed Drain vessel and etc. Project Client Duration SELIGI-FOXTROT and RAYA – ALPHA PLATFORM ESSO Production Malaysia Inc. ( February 1997 – Mac 1998 ) Position Lead Commissioning Coordinator. Malaysia Shipyard and Engineering Sdn Bhd. (MSE) Description Seligi-F and Raya-A Platform is a dual sting produce crude oil and gas to support Mother Platform at Seligi- Alpha. It have approximately 22 system based on the equipment involved.
Project Client Duration 122 BAYS AIR COOLED HEAT EXCHANGER Petronas Penapisan Sdn. Bhd. ( August 1996 – February 1997 ) Position Mechanical Commissioning Engineer. Malaysia Shipyard and Engineering Sdn Bhd. (MSE) Description Consist of 244 fan for various type of fan and heat exchanger such as Force Draft, Induced Draft and etc. Project Client Duration 20 BAYS AIR COOLED HEAT EXCHANGER BTT . France ( Jun 1996 – August 1996 ) Position Mechanical Commissioning Engineer. Malaysia Shipyard and Engineering Sdn Bhd. (MSE) Description Consist of 40 fan for various type of fan and heat exchanger such as Force Draft, Induced Draft and etc. Project Client Duration 6 BAYS HEAT COOLED HEAT EXCHANGER Chiyoda, Thailand ( April 1996 – Jun 1996 ) Position Mechanical Commissioning Engineer. Malaysia Shipyard and Engineering Sdn Bhd. (MSE) Description Consist of 12 fan for various type of fan and heat exchanger such as Force Draft, Induced Draft and etc. Project Client Duration GRAVITY BASE BUOY AUSTRALIA EAST SPAR Mac 1996 Position Mechanical Commissioning Engineer. Malaysia Shipyard and Engineering Sdn Bhd. (MSE) Description Consists of pressure vessel to engaged with the buoy for anchorage the ship to the port for bunkering oil.

More Related Content

PDF
CV 2016
bySaiful Nizam
 
DOC
Resume othman sulaiman
byothman sulaiman
 
DOCX
Rudyard Ejercito - Resume
byRudyard Ejercito
 
DOC
mechanical_engineer-raman-cv.
byRaman Mechanical_Piping
 
DOCX
CV of Mohammed Uzair
byMohammad Arif uzair
 
DOCX
OMIJIE ehinomen prince Reviewed cv
byomijie ehinomen prince
 
DOC
QA QC Engineer Mechanical
byFaizan Raza
 
DOCX
QC Supervisor Saji M
bySAJI MURALEEDHARAN
 
CV 2016
bySaiful Nizam
 
Resume othman sulaiman
byothman sulaiman
 
Rudyard Ejercito - Resume
byRudyard Ejercito
 
mechanical_engineer-raman-cv.
byRaman Mechanical_Piping
 
CV of Mohammed Uzair
byMohammad Arif uzair
 
OMIJIE ehinomen prince Reviewed cv
byomijie ehinomen prince
 
QA QC Engineer Mechanical
byFaizan Raza
 
QC Supervisor Saji M
bySAJI MURALEEDHARAN
 

What's hot

DOCX
Jordan Cv
byproactives
 
PDF
Mechanical Engineer – QAQC
byvignesh k
 
DOC
En-Waleed Ibrahim Sr. Construction Piping Engineer cv
bywaleed ibrahim
 
DOC
Resume 2015 .doc 2
bySiow Chon Wah
 
DOC
resume piping
byArul Peter
 
DOC
Cv precast concrete
byAnwardeen Jawaharlal
 
DOCX
QA_QC_CIVIL_INSPECTOR_
byseraj ahmad
 
PDF
Civil QA&QC Inspector Updated Resume
byMurugan murugan
 
DOC
AKRAM CV QC Supervisor Mechanical
byMohammad Akram Mian
 
PDF
CV Piping Supervisor
byDelfim Moreira
 
DOCX
QAQC MEP HVAC INSPECTOR
byMurugan Pillai
 
DOCX
OMIJIE ehinomen prince Reviewed cv
byomijie ehinomen prince
 
DOC
CV Dodo NEW
byahmad dodo
 
PDF
RESUME PIPING SUPERVISOR
byNOORUDDIN SHAIKH
 
DOC
Wael El Ahmadi 2016 - Sr. Construction Engineer - Mechanical -Cv
byWael El Ahmadi
 
PDF
Nailesh Patel CV
byNailesh Patel
 
DOCX
Sathish_CV Quality Control Engineer
bySathish Murugesan
 
DOCX
Nidhin George_CV
byNidhin George
 
DOC
QA QC CIVIL
byMahmoud Azab
 
Jordan Cv
byproactives
 
Mechanical Engineer – QAQC
byvignesh k
 
En-Waleed Ibrahim Sr. Construction Piping Engineer cv
bywaleed ibrahim
 
Resume 2015 .doc 2
bySiow Chon Wah
 
resume piping
byArul Peter
 
Cv precast concrete
byAnwardeen Jawaharlal
 
QA_QC_CIVIL_INSPECTOR_
byseraj ahmad
 
Civil QA&QC Inspector Updated Resume
byMurugan murugan
 
AKRAM CV QC Supervisor Mechanical
byMohammad Akram Mian
 
CV Piping Supervisor
byDelfim Moreira
 
QAQC MEP HVAC INSPECTOR
byMurugan Pillai
 
OMIJIE ehinomen prince Reviewed cv
byomijie ehinomen prince
 
CV Dodo NEW
byahmad dodo
 
RESUME PIPING SUPERVISOR
byNOORUDDIN SHAIKH
 
Wael El Ahmadi 2016 - Sr. Construction Engineer - Mechanical -Cv
byWael El Ahmadi
 
Nailesh Patel CV
byNailesh Patel
 
Sathish_CV Quality Control Engineer
bySathish Murugesan
 
Nidhin George_CV
byNidhin George
 
QA QC CIVIL
byMahmoud Azab
 

Similar to Resume NMN 5b _3_

DOC
Ng Eng Beng CV
byNg Eng Beng
 
DOC
Giridhar
byGiridhar C
 
PDF
cv Tajuddin 15 August 2015
byDipl.-Ing. Tajuddin MSc
 
DOCX
ElanCVdocx
byelanthiryan devanathan
 
DOC
Cv noor ali syarifudin
byNoor Ali Sy
 
PDF
CV_for_Mohamed_Hashim1
byMohamed Hashim
 
DOC
joseph_resume UPDATED 08192015
byJoseph. Gaon
 
PDF
Mohamed Behiry CV
bymohamed behiry
 
DOC
Ankur Singh 7 years exp. oil & gas
byAnkur Singh
 
DOCX
SENTHIL PANDIAN CV
bySenthil Pandian
 
PDF
jragojo CV
byJulito Ragojo
 
DOCX
Senior Pipeline/ Piping Mechanical Engineer Construction & Commissioning
byMohamed Mustafa
 
DOC
my_new_CV (1)
byEdward Nyalu
 
DOCX
FILTHER RIEOALEX
byFilther Rieoalex Jappri
 
DOCX
CV RANJITH
byRanjith S R
 
DOC
Cv of nilesh rk
byNILESH KAJABAJE
 
DOCX
Resume
byJackie Ting Ding Gin
 
DOC
NANIK COMMISSIONING
byvipulkumar navik
 
DOC
Mechanical Maintenance Supervisor CV
byvaithiya nathan
 
DOCX
CV Field Mechanical and Piping Engineer
byPopovici Adrian
 
Ng Eng Beng CV
byNg Eng Beng
 
Giridhar
byGiridhar C
 
cv Tajuddin 15 August 2015
byDipl.-Ing. Tajuddin MSc
 
ElanCVdocx
byelanthiryan devanathan
 
Cv noor ali syarifudin
byNoor Ali Sy
 
CV_for_Mohamed_Hashim1
byMohamed Hashim
 
joseph_resume UPDATED 08192015
byJoseph. Gaon
 
Mohamed Behiry CV
bymohamed behiry
 
Ankur Singh 7 years exp. oil & gas
byAnkur Singh
 
SENTHIL PANDIAN CV
bySenthil Pandian
 
jragojo CV
byJulito Ragojo
 
Senior Pipeline/ Piping Mechanical Engineer Construction & Commissioning
byMohamed Mustafa
 
my_new_CV (1)
byEdward Nyalu
 
FILTHER RIEOALEX
byFilther Rieoalex Jappri
 
CV RANJITH
byRanjith S R
 
Cv of nilesh rk
byNILESH KAJABAJE
 
Resume
byJackie Ting Ding Gin
 
NANIK COMMISSIONING
byvipulkumar navik
 
Mechanical Maintenance Supervisor CV
byvaithiya nathan
 
CV Field Mechanical and Piping Engineer
byPopovici Adrian
 

Resume NMN 5b _3_

  • 1.
    NORAZLAN BIN MOHDNOOR 1.0) BIODATA Address Age Date of Birth No. 27, Jalan Nakhoda 16, Taman Tun Aminah, 81300 Skudai, Johor Bahru, Johor. 40 Years 31 December 1974 Contact No. 012-7400 307 07-557 4055 012-7400308 Nationality Malaysian Religion Islam Maritial Status Married E-Mail [email protected] 2.0) EDUCATION 1992 – 1995 UNIVERSITI TEKNOLOGI MALAYSIA, SKUDAI, JOHOR. Diploma in Mechanical Engineering. 2005-2007 UNIVERSITI TEKNOLOGI MALAYSIA SKUDAI, JOHOR. Executive Certificate in Project Management. 2009-2012 KUALA LUMPUR INTERNATIONAL UNIVERSITY Bachelor in Mechanical Engineering (With Hons.)
  • 2.
    3.0) CAREER OBJECTIVE Tobe an excellence in Management and Technical through Project, Safety and Quality with opportunities in future advancement. 4.0) SUMMARY OF WORK EXPERIENCES a) Extensive experience in the field of Mechanical / Piping / Commissioning Engineering for 18 years designated as an Engineer in Safety Health and Occupational executive cum Testing & Commissioning which covers EPC, EPCC and EPCIC project. b) Attached as a Lead Commissioning for Hook-up and Commissioning for Onshore / Offshore which includes Safety Assessment, Quality, Scope of Work in Contract, Planning and Scheduling, Job Safety Analysis (JHA), Engineering, Bidding and Tendering and Final Documentation for projects involved. HIRARC member for establishing the risk assessment. c) Familiar with the Standard Specification and Design Practice such as Petronas Technical Standard (PTS), Detailed Engineering Procedure (DEP), Standard Engineering Specification (SES), Standard Engineering Guidelines (SEG), Standard Engineering Procedure (SEP), American Society of Mechanical Engineers (ASME), American Petroleum Institute (API), American Standard Testing Material (ASTM) and British Standard (BS). 4.1) ROLE AND DUTIES a) Incorporate provisions in-line with design and construction data prior execution of pre- commissioning and testing activities. b) Review and provide all execution plans, schedules, resources allocation, test procedures and final documentation for sub-ordinates and contractors. c) Interface and coordinate with discipline construction field engineers pertaining construction mechanical completion and pre-commissioning, testing and commissioning works. d) Supervise and monitor pre-commissioning, testing and commissioning activities of all plant/facilities mechanical and piping systems.
  • 3.
    e) Liaise andcoordinate with other discipline Commissioning Engineer and Supervisors with regards with system interface and testing involved. e) Ensure all mechanical and piping commissioning works are carried out as described in onshore and offshore commissioning procedures / manual / acceptance criteria, as well as the Engineering Management System - Construct and Pre-commission Facilities Procedure & Commission and Facilities Handover Procedure. f) Ensure all completeness and accuracy for system handover prior implementation the project completion management system. g) Comply and well versed in performing technical bid analysis and participate in Factory Acceptance Test (FAT) when requested. Capable to interface with other discipline related with issues arises and coordinate test with other discipline as required. h) Generate and supervise commissioning related punch-lists and other outstanding works. i) Facilitate and govern system safe start-up and subsequent facilities handover to asset holder. j) Supporting Lead Commissioning Engineer (LCE) comprises planning, work pack reviews, preparing daily commissioning report and interface with discipline, fabrication, hook-up engineers on site issues. Capable to solve and recommendation thru resolving the demonstrate team work. k) Ensuring all work-pack preparation involving hydro-test preparation and re- instatement leak test packages. l) Prepare Commissioning system boundaries, commissioning plan and commissioning priorities. 4.2) RESPONSIBILITIES a) Make sure all plant involved in mechanical and piping system have been correctly hooked up with appropriate construction check sheet completed and sign off. b) Ensure all the construction and pre-commissioning checks are witnessed and satisfactory. c) Coordinate receiving, inspection and testing of commissioning materials and equipment and ensure that all are in accordance with order / contact prior to receipt
  • 4.
    and/or acceptance bythe Company involved. d) Liaise with subordinates, contractors and facilitate vendor on execution of pre- commissioning and commissioning activities. e) To make sure the accuracy and completeness of the "As-Built" drawings as well as perform "red line mark-up. f) To carried out and ensure pre-commissioning, testing and commissioning works in safely manner, in accordance with Company standards and procedures and project specifications and acceptance criteria are meet. g) Knowledgeable and well verse in demonstrate and utilize mechanical testing and commissioning tools and equipments. h) Spearhead site flushing and pressurization test as well as hydro test, inclusive for the cleanest of the piping system prior to start-up. i) Capable in supervising and arranging site team or a team of commissioning technicians. j) Coordinate Hook-Up and Commissioning (HUC) contractor and ensure plan developed is in line with Commissioning Strategy. k) Well verse in dealing with Project Completion Management System such as CCMS or equivalent. l) Technically gained hands on experience pre-commissioning and commissioning comprises of:- i) Static equipment such as tanks / pressure vessels, re-boilers, heat exchangers, air/gas cooler, heat recovery system, etc. ii) Rotating equipment such as positive displacement pumps / compressors. iii) Centrifugal pumps iv) Mechanical equipment packages such as turbine compressors, turbine / diesel generators, instrument air compressors and dryers, chemical injection system, etc. v) Material handling such as pedestal crane, jib crane, gantry crane, overhead crane, monorail trolley hoist, etc. f) Familiar with piping system pre-commissioning works such as flushing and cleaning, hydro testing, P&ID line walk, reinstatement leak test, etc. Able to prepare hydro test and reinstatement leak test procedure/packages and spading / isolation plans and have hands on experience in leading reinstatement leak test works, experience in using Nitrogen/ Helium method. g) Knowledgeable in control and measurement philosophies, which comprises
  • 5.
    commissioning, start-up, HSSEmatters and operational requirements. h) Knowledge in piping size and materials, liquid/gas transmission system prior meeting process requirements. i) Capable in communication, interpersonal and leadership / influencing skills. j) Computer literate and proficient in MS Office, familiar with Project Completion System i.e. CCMS or similar software is preferred. k) Obtained and attended Job Hazard Analysis (JHA), Permit to Work (PTW) and Sea Survival trainings with valid certificates. l) Work out with Check sheet and checklist, Check sheet overview, Job card, Variation Order (VO), Piping and Instrumentation Diagram (P&ID) Utility Flow Diagram (UFD), Process Flow Diagram (PFD), Isometric, Piping Schedule, Cable Schedule, Tie-ins for Hook-up Drawings and Design Drawings. m)Computer literate using Microsoft Words, Microsoft Excel, Microsoft Project, Microsoft Power Point, Microsoft Access. 5.0) WORKING EXPERIENCES Project F14/F29 Field Development Project Employer Sarawak Shell Berhad Duration January 2013 - Present Position Mechanical / Piping / Commissioning Engineer Description To commission static and dynamic equipment for F14 DR-A facilities and Host Tie-Ins to F23R-A which contribute 300 mmscfd and 150 mmscfd for both F14 and F29 respectively. Consist of Slug Catcher 3 phase and 2 phase, Launcher and Receiver, Material Handling, Metering Gas and Condensate, Corrosion Inhibition System, Methanol Injection System, Power Generation System and Utilities. Project M3 TMM and TIR Project Employer Sarawak Shell Berhad Duration December 2012 - January 2013 Position Mechanical Commissioning Engineer Description To do reinstatement leak test for up-grading piping and valves change- out for introduction of Hydrocarbon and Condensate to the existing facilities.
  • 6.
    Project M1 WellClean-Up and Start-Up Employer Sarawak Shell Berhad Duration Nov 2012 – December 2012 Position Mechanical Commissioning Engineer Description To do reinstatement leak test for Choke Valve, Christmas Tree and Production Header with associated piping and valves for introduction of Hydrocarbon and Condensate to the existing facilities. Project E11 Dessander Up-Grading Employer Sarawak Shell Berhad Duration Sept 2012 – Oct 2012 Position Mechanical Commissioning Engineer Description To do reinstatement leak test for Water Dessander associated piping and valves for introduction of Hydrocarbon and Condensate to the existing facilities. Project F6 - F28 Gas Development Project Employer Sarawak Shell Berhad Duration July 2012 – August 2012 Position Mechanical Commissioning Engineer Description To do reinstatement leak test for Slug Catcher, Gas Metering, Gas Receiver and associated piping and valves for introduction of Hydrocarbon and Condensate to the existing facilities. Project St. Joseph PYROBAN IC Engine Up-grading and TIR CI Skid Employer Sarawak Shell Berhad Duration April 2012 – June 2012 Position Mechanical Commissioning Engineer Description To upgrading the IC engine of Air Intake, Turbo Charger, Flame Arrestor, Panels and associated cables for instrument and electrical. To commission the PPD and Demulsifier for SJJT-A, SJJT-B, SJJT-F, SJJT- G, SJJT-H.
  • 7.
    Project F6 DEM2 Upgrading Employer Sarawak Shell Berhad Duration January 2012 – March 2012 Position Mechanical Commissioning Engineer Description Piping change-out for the VL line inclusive of orifice plate. Project BIF Small Compact Prover Employer Sarawak Shell Berhad Duration August 2011 – December 2011 Position Mechanical Commissioning Engineer Description Start-up and commissioning for the Small Compact Prover inclusive of 2 nos. of Condensate Recirculation Pump P-490 and P-500. On top of that, review and execute hydrotest according to the package given and run the reinstatement leak test for the whole system prior free from leak and ready for introduction of hydrocarbon. Project E8 KA and F13 KA Compression Module Employer Sarawak Shell Berhad Duration Jun 2011 – July 2011 Position Mechanical Commissioning Engineer Description Responsible for assuring the mechanical static and dynamic equipment is fully commission accordingly for both compression module. Comprises 2 nos. of turbine compressor which inclusive of monorail trolley hoist, air compressor, inlet separator, HVAC, potable fire fighting system and diesel fuel system. Project LCOT New Furnace F-104 Employer Sarawak Shell Berhad Duration March 2011 – May 2011 Position Mechanical Commissioning Engineer Description Coordinate the commissioning activities for start-up the new furnace F- 104, Labuan Crude Oil Terminal and miscellaneous equipment such as Blower B-104, Fuel Gas System, Instrument Air System, Emulsion and Wax system and Closed Drain System.
  • 8.
    Project M1 CondensateRecovery Pump Employer Sarawak Shell Berhad Duration December 2010 – February 2011 Position Mechanical Commissioning Engineer Description Alignment the coupler for the vertical pump with electric driven motor engine and run the pump respectively. Reinstatement leak test to the existing line at Train A. Project F6 Rejuvenation for New Diesel Fire Water Pump Employer Sarawak Shell Berhad Duration October 2010 – November 2010 Position Mechanical Commissioning Engineer Description Change out the New Diesel Fire Water Pump at F6 using the DITA 3412 Caterpillar engine, alignment and soft foot check, test run the engine for functional check and do the reinstatement for the Fire Water Line. Project Replacement of Glycol Heater Bundles at M1 Employer Sarawak Shell Berhad Duration Jun 2010 – September 2010 Position Mechanical Commissioning Engineer Description To change the thyristor heating element, install all the relevant SPWD gasket, sequence bolt tensioning and final closure the 2 unit vessel V- 9540 and V-9640. Project HVAC Improvement Project for SJP-A Employer Sarawak Shell Berhad Duration February 2010 – May 2010 Position Mechanical Commissioning Engineer Description Commissioning the ACCU and AHU and all associated piping and ducting to deliver the positive pressure as per standard.
  • 9.
    Project Glycol RewettedCirculation Pump at M3 Complex. Employer Sarawak Shell Berhad Duration December 2009 – January 2010 Position Mechanical Commissioning Engineer Description Commission the Rewetted Glycol Pump for alignment, polarity check and functional check. Project B11-PC4 HTI Hook-up and Commissioning Employer Sarawak Shell Berhad Duration July 2009 – Nov 2009 Position Mechanical Commissioning Engineer Description Host Tie Ins (HTI) from PC4 Carigali to B11 (Shell) for all the static equipment such as Suction Scrubber, Gas Filter, Activated Carbon, Condensate Pump, Metering for Condensate and Gas and all associated piping and valves. Project TIR Chemical Injection Package for SJJT-A/B/F/G/H Employer Sarawak Shell Berhad Duration May 2009 – Jun 2009 Position Mechanical Commissioning Engineer Description To commission the Chemical Injection Pump for P-9810 A/B) for all the satellite platform in St Joseph Field. Project Labuan Crude Oil Terminal (LCOT) Employer Sarawak Shell Berhad Duration February 2009 – April 2009 Position Mechanical Commissioning Engineer Description To install and commission the New Furnace (F-104) with associated equipment such as the Fuel Gas Skid, Heater, Fan Blower (B-104) and all relevant reinstatement leak test.
  • 10.
    Project LLP Compressorfor South Furious Project Employer Sarawak Shell Berhad Duration December 2008 – January 2009 Position Mechanical Commissioning Engineer Description To commission all the static and dynamic equipment for the integrated to the existing equipment for Low Low Pressure Compressor. Final Closure Main Scrubber and Pre-Filter, Monorail Trolley Hoist, Alignment the Booster Pump and reinstatement leak test for all gas line. Employer National Institute of Occupational Safety and Health (NIOSH JB) Duration January 2008 –December 2008 Position Executive NIOSH Safety, Health and Environment. Description To coordinate all the related Safety and Health training and work passport. To support Branch Manager for administration works. Teach safety class according to the program. A comprehensive legislation frame work and practical assessment for the SHO participant. Project PC-4 DRILLING PLATFORM Client Petronas Carigali Sdn. Bhd. (PCSB) Duration March 2007 –December 2007 Position Coordinator Testing and Commissioning cum Safety and Health Advisor Malaysia Marine and Heavy Engineering Sdn Bhd. (MMHE) Description The satellite platform located at SK309 Sarawak, East Malaysia. Generally it is a gas platform hub connect to the B11 DR-A for tie-ins purpose before launch to MCOT. Project LEDANG ANOA DRILLING PLATFORM Client Petronas Carigali Sdn. Bhd. (PCSB) Duration September 2005 –February 2007 Position Lead Mechanical / Piping / Commissioning Engineer. Malaysia Marine and Heavy Engineering Sdn Bhd. (MMHE) Description The unmanned satellite platform with the fast track record to be delivered by the end of February 2006, consist of Process, Process Utilities, General Utilities, Safety Equipment, Power, Instrument and Control and Miscellaneous equipment. The above said system need to be testing and
  • 11.
    pre-commissioning parallel withthe safety awareness program to achieve the TRCF and LTI – 0. References Mr. Haji Pungut (Drilling Supervisor – PCSB Company man) Mr. Paul de Koning (Barge Supervisor – ENSCO 52) Project E11 LIVING QUARTERS Client Sarawak Shell Berhad Duration (November 2004 –August 2005) Position Lead Commissioning Coordinator. Malaysia Marine and Heavy Engineering Sdn Bhd. (MMHE) Description This project is for rejuvenation and upgrading for Heli-deck and Living Quarters for 80 mans as an extension for the existing module in E11 Block in Sarawak Sea. My task is to coordinate the planning, scheduling, final documentation, SPIR – Spare part listing, vendor and client requirements, punch listing and etc. My correspondence is act as a middleman between management and direct manpower including with the client. The major equipment involved are the Pedestal Crane 6.0 MT, HVAC with 2 unit ACCU and 2 Unit AHU, 2 Brucker Capsule with capacity of 80 man each, Potable water skid comprises a 2 unit pump with 12.5Kw and Potable water tank, Fire Fighting Equipment for potable and Fixed equipment. Project BUNGA KERTAS FPSO EPCC Client Malaysia International Shipping Corporation Duration Duration: (November 2002 –November 2004) Position Lead Commissioning Coordinator. Malaysia Marine and Heavy Engineering Sdn Bhd. (MMHE) Description The project is defined as the flotation facilities for offshore sewage and offloading the H2S for merchandise ship especially for tanker ship. The ship have 6 module that is module 1- Power Generation, Module 2- Gas Compression, Module 3- Metering Skid, Module 4 – Facilities, Module 5 – Crude Stabilization Unit, and Module 6 – Knock Off Flare.
  • 12.
    Project LARUT CCPPLATFORM Client ESSO Production Malaysia Inc Duration (August 2000 – August 2001) Position Lead Commissioning Coordinator. Malaysia Shipyard and Engineering Sdn Bhd. (MSE) Description Exxon Mobil mother platform is weighted at 8900 DWT is totally a process platform comprises a dehydration module, power generation module, utility module, Living Quarters module, MSF module Chemical Injection Module, Water Injection Module and Knock Out Module Project GUNTONG-D, MODULE 5 Client ESSO Production Malaysia Inc. Duration ( Jun 1999- August 2000) Position Lead Commissioning Coordinator. Malaysia Shipyard and Engineering Sdn Bhd. (MSE) Description A Dehydration Module for Guntong –Delta field. The objective of this system is to dehydration the sweet gas to transform to sour gas for export to the other field via slug catcher at KSB. The equipment involved is the Thyristor panel for Re-boiler, Hot Oil Circulation Pump, Satellite Separator Vessel, Tote Tank for TEG Liquid. Project Client Duration BIRWELCO BLOWER FAN Singapore Fired Heaters ( Jun 1999) Position Mechanical Commissioning Engineer. Malaysia Shipyard and Engineering Sdn Bhd. (MSE) Description The fired heaters is to facilitate the gas at Pulau Air Cawan in Singapore. The facilities are to generate the gas for power generation to Singapore Energy Board. Project Client Duration BLASTING POT HYDROTEST Malaysia Shipyard And Engineering (May 1999 ) Position Mechanical Commissioning Engineer. Malaysia Shipyard and Engineering Sdn Bhd. (MSE) Description The above equipment is provided to utilize for painting works at the yard. The objective to hydro test the Pot for the operating pressure at the approximately 7 to 13 psig. Fill-up check sheet for initial and approval.
  • 13.
    Project Client Duration BUFFALO FSO TURRETHEAD SOFEC Inc. (April 1999 – May 1999 ) Position Mechanical Commissioning Engineer. Malaysia Shipyard and Engineering Sdn Bhd. (MSE) Description The turret is the large bearing for stationed the FSO at the sea. It is anchor by 6 big chains for located the West Africa. Project Client Duration F23 K-A COMPRESSION MODULE Sarawak Shell Berhad ( SSB ) ( January 1999 – April 1999 ) Position Mechanical Commissioning Engineer. Malaysia Shipyard and Engineering Sdn Bhd. (MSE) Description Gas Compression Module comprises two trains of Turbo Compressor for gas compression and fuel gas facilities to the other module. The starter unit is using the hydraulic power pack and motor electric unit. The Turbo compressor is also using diesel incase of black start or emergency purpose. Other equipment are Pedestal Crane, Monorail Trolley Hoist, HVAC, Potable Water Pump, Diesel Fuel Pump and Etc. Project Client Duration 3 BAYS AIR COOLED HEAT EXCH Petronas Ammonia Sdn. Bhd. ( December 1998 ) Position Mechanical Commissioning Engineer. Malaysia Shipyard and Engineering Sdn Bhd. (MSE) Description The heat exchanger is a Force Draft for exchanging heat. The facilities involved are the motor electric and fan, the tube heat exchanger, louvers, and bearing system. Project Client Duration 18 BAYS AIR COOLED HEAT EXCH Propane Dehydration (October 1998 – November 1998) Position Mechanical Commissioning Engineer. Malaysia Shipyard and Engineering Sdn Bhd. (MSE) Description The heat exchanger is a Force Draft for exchanging heat. The facilities involved are the motor electric and fan, the tube heat exchanger, louvers, and bearing system.
  • 14.
    Project Client Duration BENCHAMAS FSO Single BuoyMooring Inc. USA ( August 1998 – September 1998 ) Position Mechanical Commissioning Engineer. Malaysia Shipyard and Engineering Sdn Bhd. (MSE) Description The turret is the large bearing for stationed the FSO at the sea. The facilities involved are the Monorail Trolley Hoist, Power Pack Unit, Tubing unit for lubrication system, Fire Fighting System. Project Client Duration TRENERGY FPSO TURRET SOFEC Inc. USA ( Jun 1998 – July 1998 ) Position Mechanical Commissioning Engineer. Malaysia Shipyard and Engineering Sdn Bhd. (MSE) Description The turret is the large bearing for stationed the FSO at the sea. The facilities involved are the Monorail Trolley Hoist, Power Pack Unit, Tubing unit for lubrication system, Fire Fighting System. Project Client Duration ANDING –A PLATFORM Petronas Carigali Sdn. Bhd. ( Mac 1998 – Jun 1998 ) Position Mechanical Commissioning Engineer. Malaysia Shipyard and Engineering Sdn Bhd. (MSE) Description The tripod legged satellite platform is produce to abstract gas from Terengganu Field at MASA Oil Field. The facilities applicable at the platform are the Jib Crane, Potable water Tank, Tote tank, Closed Drain vessel and etc. Project Client Duration SELIGI-FOXTROT and RAYA – ALPHA PLATFORM ESSO Production Malaysia Inc. ( February 1997 – Mac 1998 ) Position Lead Commissioning Coordinator. Malaysia Shipyard and Engineering Sdn Bhd. (MSE) Description Seligi-F and Raya-A Platform is a dual sting produce crude oil and gas to support Mother Platform at Seligi- Alpha. It have approximately 22 system based on the equipment involved.
  • 15.
    Project Client Duration 122 BAYS AIRCOOLED HEAT EXCHANGER Petronas Penapisan Sdn. Bhd. ( August 1996 – February 1997 ) Position Mechanical Commissioning Engineer. Malaysia Shipyard and Engineering Sdn Bhd. (MSE) Description Consist of 244 fan for various type of fan and heat exchanger such as Force Draft, Induced Draft and etc. Project Client Duration 20 BAYS AIR COOLED HEAT EXCHANGER BTT . France ( Jun 1996 – August 1996 ) Position Mechanical Commissioning Engineer. Malaysia Shipyard and Engineering Sdn Bhd. (MSE) Description Consist of 40 fan for various type of fan and heat exchanger such as Force Draft, Induced Draft and etc. Project Client Duration 6 BAYS HEAT COOLED HEAT EXCHANGER Chiyoda, Thailand ( April 1996 – Jun 1996 ) Position Mechanical Commissioning Engineer. Malaysia Shipyard and Engineering Sdn Bhd. (MSE) Description Consist of 12 fan for various type of fan and heat exchanger such as Force Draft, Induced Draft and etc. Project Client Duration GRAVITY BASE BUOY AUSTRALIA EAST SPAR Mac 1996 Position Mechanical Commissioning Engineer. Malaysia Shipyard and Engineering Sdn Bhd. (MSE) Description Consists of pressure vessel to engaged with the buoy for anchorage the ship to the port for bunkering oil.