Downloaded 2,014 times
Uploaded bySubham Dwivedi
Soil and Water Conservation
This document discusses various agronomic measures for soil conservation. It defines contour cultivation as conducting agricultural activities like plowing and sowing across the slope of the land. This reduces soil and water loss by interrupting runoff. Choice of crops and cropping systems can also impact soil conservation, with close-growing crops providing better protection than row crops. Other agronomic measures discussed include strip cropping, cover crops, mulching, and applying manures/fertilizers. Mechanical measures to conserve soil include contour bunding, graded bunding, bench terracing, and vegetative barriers.
More Related Content
Similar to Soil and Water Conservation
Soil and Water Conservation
- 1. SOIL CONSERVATION-DEFINITON Soil conservationis using and managing the land based on the capabilities of the land itself involving application of the best management practices leading to profitable crop production without land degradation.
- 2. AGRONOMIC MEASURES OFSOIL CONSERVATION In soil and water conservation programmes agronomic measures have to be considered in co-ordination with others for their effectiveness. These measures are effective in low rainfall areas particularly in fairly erosion resistant soils having gentle slope (< 2 %).
- 3. Measures • LAND PREPARATION •CONTOUR CULTIVATION • CHOICE OF CROPS • STRIP CROPPING • CROP ROTATION/CROPPING SYSTEMS • COVER CROPS • MULCHING • APPLICATION OF MANURES AND FERTILIZERS • APPLICATION OF CHEMICALS
- 4. LAND PREPARATION Land preparationincluding Post harvest tillage influence intake of water. Obstruction to surface flow and consequently the rate of erosion. Deep ploughing or chiselling has been found effective in reducing erosion. Rough cloddy surface is also effective in reducing erosion.
- 5. CONTOUR CULTIVATION A linejoining the points of equal elevation is called contour. All the cultural practices such as ploughing, sowing, intercultivation etc. done across the slope reduce soil and water loss. By ploughing and sowing across the slope, each ridge of plough furrow and each row of the crop act as obstruction to the runoff and provide more time for water to enter into the soil leading to reduced soil and water loss
- 6. CHOICE OF CROPS Row crops or tall growing crops such as sorghum, maize, pearl millet is not protective in conserving soil as they expose majority of the soil known as erosion permitting crops. Whereas close growing crops such as cowpea, groundnut, green gram, black gram etc., which protect soil are known as soil erosion resisting crops as they are very effective in reducing soil loss by minimizing the impact of rain drop and acting as obstruction to runoff.
- 7. STRIP CROPPING Agronomicalpractice in which ordinary crops are planted / grown in form of relatively narrow strips across the land slope. This method becomes more effective for erosion control, which it is followed with crop rotations in the area where terraces are not practically feasible The strip crops check the surface runoff and force them to infiltrate into the soil, thereby facilitates to the conservation of rain water. Generally the use of strip cropping practice for soil conservation is decided in those areas where length of slope is not too longer. ADVANTAGES a) Reducing the runoff flowing through the close - growing sod strips. b) Increasing the infiltration rate of the soil under cover condition.
- 8. CROP ROTATION/CROPPING SYSTEMS Croprotation / cropping system: mono-cropping of erosion permitting crops accelerates soil and water loss year after year. Intercropping of erosion permitting crops and erosion resisting crops or their rotation Has been found effective for reducing soil and water loss. Inclusion of legumes like Lucerne(alfalfa grass) in crop rotation reduces soil loss even in soils having 13% slope. Lucerne(alfalfa grass)
- 9. COVER CROPS Good groundcover by canopy gives the protection to the land like an umbrella and minimize soil erosion. Besides conserving soil and moisture, the cover crops hold those soluble nutrients, which are lost by leaching. The third advantage of the cover crops is the addition of organic matter. The legumes provide better cover and better protection. Among the legumes cowpea has been found to produce maximum canopy followed by horse gram, green gram, black gram and dhaincha.
- 10. MULCHING Mulching of soilwith available plant residues reduce soil loss considerably by protecting the soil from direct impact of raindrop and reducing the sediment carried with runoff . A minimum plant residue cover of 30 per cent is necessary to keep runoff and soil loss within the acceptable limits. Vertical mulching also reduce soil loss particularly in vertisols by increasing infiltration.
- 11. APPLICATION OF MANURESAND FERTILIZERS Organic manures besides supplying nutrients improve soil physical conditions thereby reduce soil loss. Fertilizers improve vegetative canopy, which aid in erosion control. APPLICATION OF CHEMICALS Soils with stable aggregates resist breakdown and thus resist erosion. Aggregate stability can increased by spraying chemicals like poly vinyl alcohol (rate will depend on the type of soil). Soils treated with bitumen increase water stable aggregates and infiltration capacity of the soil.
- 12. The mechanical measuresinclude: Contour bunding Graded bunding Bench terracing Gully control / plugging Vegetative barriers etc. MECHANICAL / ENGINEERING MEASURES OF SOIL CONSERVATION Mechanical measures usually involve construction of mechanical barriers across the direction of flow of rainwater to retard or retain runoff and thereby reduce soil and water loss.
- 13. CONTOUR BUNDING Contour bundingis a proven sustainable land management practice for marginal, sloping, and hilly land where the soil productivity is very low. Contour blinding consists of narrow based trapezoidal bunds on contours to impound runoff water behind them so that it can gradually infiltrate into the soil for crop use. Generally recommended for areas receiving <600 mm rainfall (low rainfall areas). Spacing between two bunds is commonly expressed in terms of the v.I.(Vertical interval) which is the difference in elevation between two similar pointo on two consecutive blinds.
- 14. V.I= S/a +b where, V.I.= vertical interval (m) between consecutive builds S = % slope of land a' and .b' constants depends on soil and rainfall characteristics The height of the contour bunds depends on slope of land, spacing of bunds and maximum intensity expected In deep black soils, contour bonds have been a failure due to cracking of bunds during dry months and water stagnation above the bunds for prolonged periods during rainy season FORMULA IS USED FOR DETERMINING SPACING OF BUNDS.
- 15. GRADED BUNDING Constructedin high rainfall areas of˃600 mm where excess water has to be removed safely of the said to avoid water stagnation. In case of highly impermeable soils like deep black soils graded bunds are recommended even in lesser rainfall area (500 mm) as in case of Bellary region of Karnataka. Water flows in graded channels constructed on upstream side of bunds at non-erosive velocities and is led to safe outlets or grassed waterways. Channel portion of the graded bunds is put under cultivation and the grassed waterways are permanently kept under grass
- 16. BENCH TERRACING Practicedin steep hill slopes, where mere reduction of slope length is not adequate for reducing the intensity of scouring action of runoff flowing down. In addition to slope length reduction, the degree of slope is also reduced. Bench terracing consists of transforming relatively steep land into a series of level strips or platforms across the slope to reduce the slope length and consequently erosion. The field is made into a series of benches by excavating soil from upper part and filling in the lower part of terrace. It is normally practiced on slopes > 14% i.e. from 16 t o 33%. Depending on soil, climate and crop requirements bench terraces may be table top or level, sloping outwards or sloping inwards
- 17. VEGETATIVE BARRIERS These arethe rows of closely planted grass or shrub along the contours for erosion control in Agricultural lands. They check the velocity of runoff and retain the sediment by acting as barrier to runoff. Kobus Khus (Vetiveria zyzynoides) is the most recommended plant for this purpose. Grassed waterways: These are drainage channels either developed by shaping the existing drainage ways Objectives of grassed waterways 1. To provide drainage to agricultural lands 2. To convert unstable channels or gullies into stable channels by providing grass cover 3. For leading water at non erosive velocity into farm ponds Grassed water ways are normally dug to a shallow depth of 0.15 to 0.5 m.
- 18. Ridges andfurrows Tied ridging Broad bed furrows(BBF) Dead furrows Compartmental bunding Scooping Zingg terracing or conservation bench terracing Mechanical/Engineering measures of soil conservation Contour bunding Graded bunding Bench terracing Vegetative barriers IN SITU SOIL MOISTURE CONSERVATION PRACTICES SOIL AND WATER CONSERVATION PRACTICES
- 19. RIDGES AND FURROWS The field must be formed into ridges and furrows Furrows of 30-45 cm width and 15-20 cm height are formed across the slope. The furrows guide runoff water safely when rainfall intensity is high and avoid water stagnation. They collect and store water when rainfall intensity is less. It is suitable for medium deep to deep black soils and deep red soils. It can be practiced in wide row spaced crops like cotton, maize, chillies, tomato etc. It is not suitable for shallow red soils, shallow black soils and sandy/ gravelly soils.
- 20. Tied ridging It isa modification of the system of ridges and furrows wherein the ridges are connected or tied by a small bund at 2-3 m interval along the furrows to allow the rain water collection in the furrows which slowly percolated in to the soil profile
- 21. Broad bed furrows(BBF) This practice has been recommended by ICRISAT It is mainly for vertisols or black soils in high rainfall areas (> 750 mm). Beds of 90-120cm width, 15 cm height and convenient length are formed, separated by furrows of 60 cm width and 15 cm depth. When runoff occurs, its velocity will be reduced by beds and infiltration opportunity time is increased. It can be formed by bullock drawn or tractor drawn implements.
- 22. Broad bed furrowhas many advantages over other methods. • It helps in moisture storage • Safely dispose off surplus surface runoff without causing erosion • Provide better drainage facilities • Facilitate dry seeding • It can accommodate a wide range of crop geometry i.e. close as well as wide row spacing. • It is suitable for both sole cropping and intercropping systems. • Sowing can be done with seed drills.
- 23. At thetime of sowing or immediately after sowing, deep furrows of 20 cm depth are formed at intervals of 6 to 8 rows of crops. No crop is raised in the furrow. The dead furrows can also be formed between two rows of the crop, before the start of heavy rains (Sep - Oct). It can be done with wooden plough mostly in red soils. #The dead furrows Increase the infiltration opportunity time DEAD FURROWS
- 24. Compartmental building Smallbards of 15 cm width and 15 cm height are formed in both directions to divide the field into small basins or compartments of square or rectangular shape of 6 x 6 m to 10 x 10 m size using bond former . They are useful for temporary impounding of rain water which facilitates high infiltration resulting in high moisture storage in the soil. Recommended for black soils with a slope of 0.5 to 1%. Maize, sunflower, sorghum perform well in this type of bunding
- 25. Scooping Scooping the owlsurface to form small depressions or basins help in retaining rain water on the surface for longer periods They also reduce erosion by trapping eroding sediment.
- 26. Zinggterracing or conservationbench terracing • These are developed by A.W.Zingg, in USA. • Zingg terracing is practiced in low to medium rainfall areas in black soils with contour bunds. • It is a method of land shaping where lower one third portion of the land adjacent to the contour is levelled to spread to the runoff water coming from the remaining two third portion of the field • This rainfall multiplication technique ensures at least one good crop in one third area even in low rainfall years. Usually during medium rainfall years water intensive crops (like paddy) are cultivated in the levelled portion (receiving area) while dry crops are cultivated in the unlevelled (donor) area.