SPS Low Voltage Zero Halogen Cable Joints For Limited Fire Hazard Cables - SPS SPANHF Heat Shrink Cable Jointing Kits

SPS Low Voltage Zero Halogen Cable Joints For Limited Fire Hazard Cables - SPS SPANHF Heat Shrink Cable Jointing Kits

• 1.
  Unit E3, CrownWay, Crown Park Industrial Estate, Rushden, Northants, UK, NN10 6FD Tel: +44 (0)1933 356758    Fax: +44 (0)1933 413821    Email: [email protected] Skype: shrinkpolymersystems   www.shrinkpolymersystems.co.uk 46 Low Voltage Zero Halogen Cable Joints for limited Fire Hazard Cables • Fire tested and compliant with London Underground standards 2-0100-002 or the fire safety of materials and E4156 for the cable standard • Slim profile and unlimited shelf life complete with range taking mechanicalshearbolt connectors if required • Full range of joints available for all cable types including power and multicore cables Shrink Polymer Systems offer a comprehensive range of heat shrink joints suitable for both single and multicore low smoke fume zero halogen cables. Developed for London Underground for use within the tunnels and above surface, the system incorporates flame retardant, non halogen polyolefin heat shrink tubing with a meltable inner liner that itself has excellent flame retardant properties with reduced acid gas emission and smoke generation. The system incorporates a flexible outer fire barrier tube that provides a high degree of fire resistance. For installations outside of the tunnels, this can be omitted. For ease of use, the range can be supplied with range finding mechanical shearbolt connectors. Slim in profile, the joints can be installed in horizontal and vertical planes and have an unlimited shelf life. Joints to Suit Single or 2/3/4 Core XLPE / EPR Cables Part Number Cable Range Voltage SPA NHF 1.5-2.5 – 1.5-2.5mm² 600/1000V SPA NHF 4-6 – 4-6mm² 600/1000V SPA NHF 10-16 – 10-16mm² 600/1000V SPA NHF 25-50 – 25-50mm² 600/1000V SPA NHF 70-95 – 70-95mm² 600/1000V SPA NHF 120-185 – 120-185mm² 600/1000V SPA NHF 240-300 – 240-300mm² 600/1000V SPA NHF 400-630 – 400-630mm² 600/1000V SPA NHF 800-1000 – 800-1000mm² 600/1000V Notes: 1. For non armoured joints, omit letter (A) from the part number 2. Add last digit to part number to indicate number of cores
• 2.
  Unit E3, CrownWay, Crown Park Industrial Estate, Rushden, Northants, UK, NN10 6FD Tel: +44 (0)1933 356758    Fax: +44 (0)1933 413821    Email: [email protected] Skype: shrinkpolymersystems   www.shrinkpolymersystems.co.uk 47 Joints to Suit Multicore / Multipair XLPE / EPR Cables Part Number Cable Range Voltage SPA NHF 1.5-2.5-5 5 core 1.5-2.5mm² 600/1000V SPA NHF 1.5-2.5-7 7 core 1.5-2.5mm² 600/1000V SPA NHF 1.5-2.5-12 12 core 1.5-2.5mm² 600/1000V SPA NHF 1.5-2.5-19 19 core1.5-2.5mm² 600/1000V SPA NHF 1.5-2.5-27 27 core 1.5-2.5mm² 600/1000V SPA NHF 1.5-2.5-37 37 core1.5-2.5mm² 600/1000V SPA NHF 1.5-2.5-48 48 core 1.5-2.5mm² 600/1000V SPA NHF 1.5-2.5-61 61 core 1.5-2.5mm² 600/1000V Notes: 1. For non armoured joints, omit letter (A) from the part number 2. Add letter “PR” to end of part number to indicate multipair cables 3. If cable size is 0.5-1.5mm², insert 0.5-1.5mm after SPA NHF then number of cores Low Voltage Zero Halogen Cable Joints for Fire Resistant Cables • Designed for use where low smoke fume and fire resistance is essential • Designed and tested in leading UK fire testing laboratory, in accordance with the procedures specified in IEC 60331-21:1999 • Test report available • Joints available for all types of LV and MV cables Fire resistant cables are usually installed where vital electrical circuits are required to continue operating in the event of a fire. Shrink Polymer Systems can provide joint kits to suit these cable types for both single and multicore configurations. In addition to utilising LSF/Zero halogen heat shrink tubes and fire barrier tubes, the joints also incorporate mica tape over each of the cores. Mica tape is a slit silica tape constructed from 96% pure SiO2 silica fiber, coated one side with a pressure sensitive adhesive backing that facilitates installation. The adhesive decomposes at high temperatures, leaving a perfectly taped core Suitable for use at 1800°F (982°C), and able to withstand short term exposure up to 3000°F (1650°C), mica tape when combined with our proven zero halogen joint range, enables the joint to work in these extreme conditions.