Student information management system.pdf

AN
INTERNSHIP REPORT
ON
STUDENT INFORMATION MANAGEMENT SYSTEM
In partial fulfillment of the requirements for the degree of
B.Sc.
In
COMPUTER SCIENCE AND INFORMATION TECHNOLOGY
Submitted To:
DEPARTMENT OF COMPUTER SCIENCE AND
INFORMATION
TECHNOLOGY
FARWESTERN UNIVERSITY
Mahendranagar,Kanchanpur
Submitted By:
Mr. Kamal Acharya (768235)
December,2019

LETTER OF DECLARATION
This is to declear that the project entitled "STUDENT INFORMATION
MANAGRMENT SYSTEM" is an original work done by undersigned, in
partial fulfillment of the requirements for the degree "Bachelor of Science in
Computer Science and Information Technology" at Computer Science and
Information Technology Department, Farwestern University
All the analysis, design and system development have been accomplished by the
undersigned. Moreover, this project has not been submitted to any other college
or university
Mr. Kamal Acharya
Symbol No :768235
Semester : VII

LETTER OF SUPERVISION
This is certify that, Mr. Kamal Acharya Of B.sc. Computer Science and
Information Technology has completed this project entitled "Student
Information Management System" in partial fulfillment of the requirement for
the degree of B.Sc. Computer Science and Information Technology under my
guidance and supervision. Therefore, I recommend this project for final
approval and acceptance.
………………………..
Supervisor
Er. Dipendra Kumar Air
Assistan Professor
Department Of CSIT

LETTER OF APPROVAL
This is to certify that, this intern project report prepared by, Mr. Kamal
Acharya of B.sc. Computer Science and Information Technology entitled
"Student information Management System" in partial fulfillment of the
requirement for the degree of B.Sc. Computer Science and Information
Technology has been well studied. In our opinion it is satisfactory in the scope
and quality as a project for the require degree.
………………………. ………………………
Supervisor Head Of Department
Er.Dipendra Kumar Air Ramesh Pd. Bhatta
Assistant Professor Assistant Professor
Department of CSIT Department of CSIT
…………………….. …………………...
Internal Examiner External Examiner
Date: Date:

ACKNOWLEDGEMENT
Success is never achieved single handle so, is our duty to acknowledge all those
who have provided a helping hands in making this internship success. Firstly, I
would like to thank Mr. Keshav Nepal for giving me the opportunity to do an
internship within the WorldLink Communications. Although quite short, for me
this was the great experiences I can learn from. It helped to explore my skills
and increased my interest in Software Development (Python). Special thanks to
Mr.Suchit Poudel for being so accommodating and understanding. I would also
like to thanks Mr. Samit Jana and the staff of WorldLink Communications for
helping me during my mobility period.
Last not least a great deal of appreciation and best wishes to all my friends for
their contribution and encouragement during this Internship.
Kamal Acharya

ABSTRACT
An organized and systematic one solution is essential for all the institution and
organization. There are various department of administration for maintain of the
college information and student database in any institution. All these
departments provides various records regarding students. Most of these track
records needs to maintained information about students. This information could
be the general details like student name, address, performance etc or specific
information related to the departments like collection of data. This entire
module in college is independent. These are maintained manually. So we need
to automate and centralized as .information from one module will be related to
our modules. With that in mind we over halted the existing student information
management system and made necessary improvement to streamline the
process. Our work is useful for the easy user interface. We are planning to make
the student information management system that can be used by the educational
institutes to maintain the records of student easily. Archieving this objective is
difficult of using the manual system as the information is scattered, can be
redundant and collecting relevant information may be very time consuming. All
these problems are solved using this project.

LIST OF FIGURE AND TABLES
List of figures
1 Fig A: architecture
2 Fig B: Entity relationship diagram
3 Fig C: data-flow diagram
4 Fig D: Decision Tree
5 Fig E: Use Case Model
6 Fig F: E-R diagram of the system
List of tables
1 Table 1: Admin
2 Table 2: Student

ABBREVIATIONS
WWW = World Wide Web
DFD = Data Flow Diagram
PC = Personal Computer
UML = Unified Modeling Language
ERM = Entity Relationship Model
RAM = Random Access Memory
DBMS = Database Management System

TABLE OF CONTENTS
TITLE PAGE NO.
1.Introduction 1
2.Problem statement 2
3.Objectives 3
4.Scope of project 4
5.Requirement analysis and feasibility study 5
5.1.1 Requirement Analysis
5.1.2 Feasibility Study
5.1.2.1 Technical Feasibility
5.1.2.2 Operational Feasibility
5.1.2.3 Economic Feasibility
6. System design 8
6.1 Introduction
6.1.1Scope and purpose
6.1.2 Overall System Design Objectives
6.1.3 Structure Of Design Document
6.2 System Architecture Design
6.2.1 System Architecture
6.3 Entity Relationship Diagram 9
6.3.1 Entity Relationship Diagram
6.4 Functional Design Description
6.4.1 Data Flow Diagram
6.4.2 Use Case Model 10
6.5 Use Case Diagram For Login 11
6.6 Use Case For Student Details
6.7 Use Case Diagram For Edit 12
6.8 Use Case Diagram For Register Student

7.Implementataion 13
7.1 Conversion
7.2 Installation
7.2.1 Direct Installation
7.2.2 Parallel Installation
7.2.3 Phased Installation
8.Testing 14
8.1 White-box testing
8.2 Black-box testing
9.Maintenance and support
10.Conclusion and enhancements 16
Snapshots and Codes 16
REFERENCES & BIBLIOGRAPHY 24

1
Chapter 1
INTRODUCTION
The "Student Information Management System" is prepared or operates
to maintain the records of student in school as well as in college. Student
Information Management System deals with the all the activities done by
computers such as registration admission process online , and staff and class
management etc all these process are handled by the computer management
system. The student record can be maintained online for the distance accessible
to the entire student and their parents. Without the student management system
managing and maintaining the details student is tedious job for any
organization. Student information system will store all the detailed of the
students including their background information, educational qualifications,
Personal details and all the information related to their resume.
Suppose we have 1000 of student from this we have to search a particular
student we know the name of the student. In a manual system it is a tedious task
through we know the name of student but using the module we can easily search
the student by specifying the name of student in the search criteria. Thus
module will help the administrator in searching the student with the various
criteria. This student management system also contained the registration module
and account management. This module will help the student get registered from
anywhere if the internet is present. This module really simplifies the works on
paper registration. Also after successful registration the user can update
information and changed their password as when required
This student management system also contained the user module. This
module will help administrator enabling and disable a user account and change
their password when they required.

2
Chapter 2
PROBLEM STATEMENT
The current system of any college is manual paper based system. This manual
system is very difficult to maintain the information of student.
It is a very tedious system and time consuming. To overcome all these problems
we have to decide to make the computerized student information management
system which help to manage the student record electronically toreplace the
paper based system.

3
Chapter 3
OBJECTIVE OF THE PROJECT
The objective of the student information management system is to allow the
administrator or any organization to edit and find the personal details of student
and allow the student to keep upto date his profiles. It also facilities the keeping
all records of student, such as their id, name milling address, phone number,
DOB etc. So all the information about an student will be available in few
seconds. Overall it'll make the student information management an easier job
for administrator and the student of any organization. The main of SIMS
document is to illustrate the illustrate the requirement of the project student
information system and intended to help any organization to maintained and
manage the student personal data.

4
Chapter 4
SCOPE OF THE PROJECT
 The Student Information Management System(SIMS) can be enhanced to
include some other functionality like marks, attendance management.
 Talent management of the student based on their performance evaluation
can be added.
 Social networking can also be added where in student can interact with
each other.
 Online class functionality can be added.
 Can evolve as an online institution.
 Functionality of chat and message can be added.
 online exam functionality can be added.
 online resume builder can functionality can be also added.

5
Chapter 5
REQUIREMENT ANALYSIS AND FEASIBILITY STUDY
This is the most important phase of any project. The success or failure
of the project highly depends on this phase. A good analysis and
feasibility study leads to the success of the system.
5.1.1 REQUIREMENT ANALYSIS
Requirements analysis, also called requirements engineering,
is the process of determining user expectations for a new or modified
product. Project analysis is the process of collecting and analyzing the
requirements of the project to be developed
Effective requirements analysis includes four type of activity:
 Requirements Elicitation : The elicitation activity consists of
understanding the user's need and gathering information and high level
requirements.
 Requirements Analysis : The analysis activity examines the high level
requirements and determines if they are clear, complete, and free of
contradictions, and then defines the strategy to address these issues.
 Requirements Specification: The specification activity defines the
behavior of a system in development and determines the method for
requirements documentation.
 Requirements Validation: The validation activity involves sessions with
users, stakeholders, and functional experts to determine issue resolution
plans for conflicting requirements before projects move into the
development phase.
we studied various mobile websites and obtain different information
and gain idea to build our system. Depending upon the nature as well
as sources of information, we collected data from various websites
such as www.slideshare.in, www.wikipedia.com, etc. and obtained the
information.

6
5.1.2 FEASIBILITY STUDY
A feasibility study is an evaluation and analysis of the potential of the
proposed project which is based on extensive investigation and research.
Feasibility study is an analysis of the ability to complete a project
successfully, taking into account legal, economic, technological and other
factors. It allows investigating the possible negative and positive outcomes
of a project before investing too much time and money. The objective of a
feasibility study evaluates the project's potential for success. There are
mainly three types of feasibility which are described as below:
5.1.2.1 TECHNICAL FEASIBILITY
Technical Feasibility assesses the resources and technology, which are
required to accomplish user requirement in the software within the
allocated time Technical feasibility considers the technical requirements
of the proposed project. It deals with:
 Whether the required technology is available or not.
 Whether the required resources such as software and hardware are
available or not.
 Is relevant technology mature enough to be easily applied to our
problem?
 What kind of technology will we need?
 Is the proposed technology or solution practical ?
 Do we possess the necessary technical expertise?
Minimum requirements to run this system:-
 Hardware:-256MB RAM or above, Celeron processor,40GB hard disk or
above.
 Software:-Windows 2000/XP/VISTA/7,tomcat server, XAMPP(for
Myself).
These resources were easily obtained. Hence the project is technically
feasible.

7
5.1.2.2 OPERATIONAL FEASIBILITY
Operational feasibility is dependent on human resources available for the
project and involves projecting whether the system will be used if it is
developed and implemented. Operational feasibility is a measure of how
well a proposed system solves the problems. This aspect defines the
urgency of the problem and the acceptability of any solution. It also
focuses on whether the required manpower is available or not to operate
the system. The operational study includes people-oriented and social
issues: internal issues, such as manpower problems, labor objections,
manager resistance, organizational conflict and policies; also external issue,
including social acceptability, legal aspects and government regulations. It
takes in consideration whether the current work practices and procedures
support a new system and social factors of how the organization changes will
affect the working lives of those affected by the system. It deals with:
 Does this project requires some investment in tool, skill levels, hiring,
and infrastructures?
 Do we have the right mix of team to take up this project?
Our project mainly requires internet and computer to carry out the operation,
which were easily obtained. Hence it is operationally feasible.
5.1.2.3 ECONOMIC FEASIBILITY
Economic feasibility could also referred to as cost/benefit analysis. It is the
most frequently used method for evaluating the effectiveness of new system. It
is the bottom line for many projects it specifies:
 Is the system cost effective?
 The cost of doing full system study.
 can the project be done, within cost constraints?
 What is the minimal cost to attain a certain system?
The cost may be of following category:
 Computer cost : Rs(18000-20000)
 Router cost : Rs 2500
 Internet cost : Rs1000 per month
 Website cost : Rs 7000
 Website registration cost : Rs(4000-5000)
 Maintenance cost : Rs 1000 per year
 Total cost : Rs(33500-36500)
Through the initial cost is a little bit more but was affordable. Hence the project
is economically feasible.

8
Chapter 6
SYSTEM DESIGN
6.1.Introduction
6.1.1 Scope and purpose
The purpose of the design phase is to develop a clear understanding of
what the developer want people to gain from his/her project. As you the
developer work on the project, the test for every design decision should be
"Does this features fulfill the ultimate purpose of the project?" A purpose
statement affects the design process by explaining what the developer wants the
project to do, rather than describing the project itself. The design document will
verify that the current design meets all of the explicit requirements contained in
the system model as well as the implicit requirements desired by customer.
6.1.2 Overall System Design Objectives
The overall system design objective is to provide an efficient, modular design
that will reduce the system's complexity, facilitate change and result in an easy
implementation. This will be accomplished by designing strongly cohesion
system with minimal coupling. In addition, this document will provide interface
design models that are consistent user friendly and will provide straight forward
transition through the various system functions.
6.1.3 Structure Of Design Document
 System Architecture Design – The System architecture section has
detailed diagram of the system, server and client architecture.
 Data Design – The data design include an ERD as well as database
design.
6.2. System Architecture Design
6.2.1 System Architecture
Fig. System Architecture
jh Student information Management
j Maintaining student detail jjjjjjjjjjjhh Search student detail

9
The SMIS is a system which contains major part which include : student detail,
student image and resume. The user selects one of the available options as an
input to the system. According to the input by the user the system acts and the
rest of the functions are performed accordingly. The administrator can operate
on any student details. But the normal student or users can only access their
details of all the functionalities.
6.3.1 Entity Relationship Diagram
Fig: Entity Relationship Diagram
6.4.2 Data flow diagram Request To Login
Login Granted
Request To Edit Request To View
Request To View
Fig: Dataflow Diagram
nLo Login
dddddd id
roll no
Manages
jd Administrator S Student
name
Password city
pcount
standard
image
Administrator
Student
Database
Administrator
Module process
Student Module
Process

10
6.4.2 Decision Tree
Request for login
Login Failed Admin Login Request to view
6.4 USE CASE MODULE
Admin
Student
Fig: USE CASE MODULE
Home
Student
Login
View
Administrator
Home
Student Detail
Search Student
Detail
Display Student
e Detail
Edit Student Detail
View Student
Information
View Student
Information
Edit Student
Information
Search Specific
Student

11
6.5 USE CASE DIAGRAM FOR LOGIN
["Log In" Selected]
Fig: DFD Login
6.6 USE CASE FOR STUDENT DETAIL.
[Display Student Selected]
[Exit Selected]
[Record Does Not Exist]
[Success]
Use Case Report-Display Student Details
Redirect to Main Menu
Student Details
Displayed
Enter A Search
Key
Display
Student

12
6.7 USE CASE DIAGRAM FOR EDIT
[Invalid User_id
or Password]
Fig :USE CASE DIAGRAM FOR EDIT
Database Updated
View/Edit the Details
Login To The Websites

13
Chapter 7
IMPLEMENTATION
An implementation is a realization of a technical specification or
algorithm as a program, software component or other computer system
through programming. Many implementation may exist for a given
specification or standard. Implementation is the process of converting
new system design into specification or standard. Implementation is the
process of converting new system design into operational mode. It consist
of mainly two activities:
 Conversion
 Installation
7.1 Conversion
Conversion means changing from one system to another system. The
objective is put the tested system into operation. It involves:
 Creating computer compatible file.
 Training the operating staff.
 Installing terminals and hardware.
7.2 Installation
The process of moving from current system to new system is called insta-
llation . There are several different approach to install a system:
7.2.1 Direct installation:
Changing the old system to new system by turning off the old
system when the system is turned on
7.2.2 Parallel installation:
Running the old system and old system at the same time until the
management decides the old system can be turn off.
7.2.3 Phased installation:
Phased installation is an incremental approach. With phased
installation; one function component of new system is installed
with next functional component of old system until the whole
system is installed.
For this project we used direct installation.

14
Chapter 8
TESTING
Testing means checking if a program for the specific inputs gives correct-
ly and expected results. Testing is a process of executing a program with
the goal of finding errors. So, testing means that one inspects behavior of
a program on a finite set of test cases. Testing can be stated as the process
of validating and verifying that a computer program/application/product:
 Meets the requirements that guided its design and development,
 Works as expected.
 There are two types of testing i.e Black Box Testing and White Box
Testing.
8.1 White-box Testing:
White-box testing (also known as clear box testing, glass box testing,
and transparent box testing and structural testing) is a method of test-
ing software that tests internal structure or workings of an application. In
white-box testing an internal perspective of the system, as well as progr-
amming skills, are used to design test cases. The tester chooses inputs to
exercise paths through the code and determine the appropriate outputs.It
is testing of the structural internals of the code. In this testing, the internal
structure/design/implementation of the items being tested is known to the
tester.
8.2 Black-box Testing:
Internal workings of the software itself. Only inputs and outputs are exa-
mined. Black box testing id often referred to as behavioral testing, in the
sense that we want to test how the software behaves as a whole. It is
mainly applicable to higher levels of testing i.e
Black-box testing is a way of testing software without having much
knowledge of the Acceptance Testing and System Testing. It focuses on
functionality of system.
For our project we used white box testing.
This project has checked the possible errors such as:
Test Case: This test will check the application "Login Form".
Test Procedure: To login enter username and password.
Expected Result: If login is validated we are allowed to go to next page.

15
Actual Result: Next page show the main menu page where different task
can be performed.
The software will definitely undergo change once it is delivered to the
customer. There can be many reasons for this change to occur. Change
could happen because of some unexpected input values into system. In
addition, the changes in the system could directly affects the software
operations.
In general, software remains operational for an extended period of time
after initial implementation and requires regular maintenance to ensure
that the software operates continuously at peak performance levels.
Maintenance tasks are typically performed by the designers of the
software to address issues discovered after deployment of the software
program. The Maintenance and Support is a format project lifecycle phase
used to regularize and institutionalize changes.
Maintenance refers to all modification operations carried out on operatio-
nal software, leaving its basic functionalities intact. Corrective
maintenance consists of correcting errors of the system, and upgrade
maintenance consists of modifying the system to add new functionalities.

16
Chapter 10
CONCLUSION AND ENHANCEMENT:
With the successful implementation of this project will remove the
manual system used by various school administrations. It helps to keep
the records of student in the database and easy to add and search the
student detail. This project also can be enhancement to maintain the salary
of staff and fee of the student. This will take few time and economical
for the school.
Some code of the project
Source code
Student_List.html
<!DOCTYPE html>
<html lang="en">
<head>
<meta charset="UTF-8">
<title>Title</title>
</head>
<body>
{% extends 'base.html' %}
{% block body_block %}
{% if messages %}
{% for msg in messages %}
<div class="alert alert-{{ msg.tags }}">
{{ msg }}
</div>
{% endfor %}
{% endif %}
<table>
<tr>
<th>id</th>
<th>Name</th>
<th>Age</th>
<th>address</th>
<th>School</th>
<th>Delete</th>
<th>Edit</th>
<th>Photo</th>
</tr>
{% for student in students %}

17
<tr>
<td>{{student.id}}</td>
<td>{{student.name}}</td>
<td>{{student.age}}</td>
<td>{{student.address}}</td>
<td>{{student.school}}</td>
<td><a href="{% url 'delete_student' id=student.id
%}">Delete</a></td>
<td><a href="{% url 'edit_student' id=student.id
%}">Edit</a></td>
<td>
{% if student.photo %}
<img src="{{student.photo.url}}" alt="doesn't exit"
height="50px">
</td>
{% endif %}
</tr>
{% endfor %}
</table>
</body>
School_List.html
<!DOCTYPE html>
<html lang="en">
<head>
</head>
<body>
<table>
<tr>
<th>id</th>
<th>Name</th>
<th>address</th>
</tr>
{% for school in schools %}
<tr>
<td>{{school.id}}</td>

18
<td>{{school.name}}</td>
<td>{{school.address}}</td>
</tr>
{% endfor %}
</table>
</body>
</html>
Edit_student.html
<!DOCTYPE html>
<html lang="en">
<head>
</head>
<body>
<form method="POST" enctype="multipart/form-data">
{% csrf_token %}
{{ form.as_p}}
<input type="submit" value="Save changes">
</form>
{% endblock %}
</body>
</html>
Contact_us.html
<!DOCTYPE html>
<html lang="en">
<head>
</head>
<body>
<form method="post">
{% csrf_token %}

19
{{ form }}
<input type="submit" value="submit">
</form>
{% endblock %}
</body>
</html>
Base.html
<!DOCTYPE html>
{% load staticfiles %}
<html lang="en">
<head>
{% block title %}
{% endblock %}
<link href="{% static 'css/bootstrap.min.css' %}" rel="stylesheet"
type="text/css">
</head>
<body>
<nav class="navbar navbar-expand-lg navbar-light bg-light">
<a class="navbar-brand" href="#">Navbar</a>
<div class="collapse navbar-collapse" id="navbarSupportedContent">
<ul class="navbar-nav mr-auto">
<li class="nav-item active">
<a class="nav-link" href=" "> home </a>
</li>
<li class="nav-item">
<a class="nav-link" href=" url 'app2_index'}">image</a>
</li>
</ul>
</div>
</nav>
{% endblock %}
</body>
</html>

20
Snapshot
Database Tables:
In database:

24
REFRENCES AND BIBLIOGRAPHY
 Programming with python A prime 3e (E.Balagurusamy),The
McGraw Hill Companies
 Pressman, R.S(2014).,"Software Engineering – A Practitioner's
Approach", 8th
Edition, New Delhi,McGraw Hills
 LethbridgeTimothy and LaganiereRobert (2010). Object-oriented
software Development using UML.New Delhi, McGraw Hills
 Jeffrey L.Whitten, Lonnie Bentley, System analysis and design
methods,5th
Edition,Mc-Graw Hill
 Jeffery A. Hoffer, Joey F.George, JosephS.valacich,Modern Systems
Analysis and Design,7th
Edition, Person Education
 Silberschatz, H.F. Korth, and S.Sudarshan, Database System
Concepts, 6th
Edition, McGraw Hill, 2010
www.google.com
www.slideshere.com.inS
Some Hindi YouTube channel
www.w3schools.com

Student information management system.pdf

More Related Content

What's hot (20)

Similar to Student information management system.pdf (20)

More from Kamal Acharya (20)

Recently uploaded (20)

Student information management system.pdf