Switch case and looping

Switch Case and Looping
A final requirement for programming

http://eglobiotraining.com

Programming

We first define the word “programming”, it is a
computer language programmers use to develop
applications, scripts, or other set of instructions for a
computer to execute.


As an individual, I have learned that
programming is a very broad because it
composes many scripts, applications and can be
used to run a program that has been part of the
programming language.


At first, programming is confusing because
you have so much to understand about codes
that will enable to run a program. Programming
has applications and program development, the
best example for this is the Internet bowser…


You have to consider languages to run or
write your own program, most demanded
language in programming is the DEV C++ (a full-
featured Integrated Development Environment
(IDE)).


Switch Case

Switch case statements are a substitute
for long if statements that compare a variable
to several "integral" values ("integral" values
are simply values that can be expressed as an
integer, such as the value of a char).


basic format for using switch case:
switch ( <variable> ) {
case this-value:
Code to execute if <variable> == this-value
break;
case that-value:
Code to execute if <variable> == that-value
break;
...
default:
Code to execute if <variable> does not equal the value following any of the cases
break;
}

The value of the variable given into switch is compared to the value following each
of the cases, and when one value matches the value of the variable, the computer
continues executing the program from that point.


The condition of a switch statement is a value.
The case says that if it has the value of whatever is
after that case then do whatever follows the colon.
The break is used to break out of the case
statements. An important thing to note about the
switch statement is that the case values may only be
constant integral expressions.


“Break” is a keyword that breaks out of the code
block, usually surrounded by braces, which it is in. In
this case, break prevents the program from falling
through and executing the code in all the other case
statements.


The default case is optional, but it is wise to
include it as it handles any unexpected cases. Switch
statements serves as a simple way to write long if
statements when the requirements are met. Often it
can be used to process input from a user.


This shows how would you use a Switch in a Program
#include <iostream>

using namespace std;

void playgame()
{
cout << "Play game called";
}
void loadgame()
}
cout << "Load game called";
void playmultiplayer()
{
cout << "Play multiplayer game called";
}

int main()
{
int input;

cout<<"1. Play gamen";
cout<<"2. Load gamen";
cout<<"3. Play multiplayern";
cout<<"4. Exitn";
cout<<"Selection: "; cin>> input;
switch ( input ) {
case 1: // Note the colon, not a semicolon
playgame();
break;
loadgame();
break;
playmultiplayer();
break;
cout<<"Thank you for playing!n";
break;
default: // Note the colon, not a semicolon
cout<<"Error, bad input, quittingn";
break;
}
cin.get();
} http://eglobiotraining.com

That program will compile, but cannot be run until the
undefined functions are given bodies, but it serves as a
model (albeit simple) for processing input. If you do not
understand this then try mentally putting in if statements for
the case statements. Default simply skips out of the switch
case construction and allows the program to terminate
naturally. If you do not like that, then you can make a loop
around the whole thing to have it wait for valid input. You
could easily make a few small functions if you wish to test the
code.


Looping

Loops are used to repeat a block of code.
Being able to have your program repeatedly
execute a block of code is one of the most basic
but useful tasks in programming -- many
programs or websites that produce extremely
complex output (such as a message board) are
really only executing a single task many times.


(They may be executing a small number of
tasks, but in principle, to produce a list of
messages only requires repeating the operation
of reading in some data and displaying it.) Now,
think about what this means: a loop lets you
write a very simple statement to produce a
significantly greater result simply by repetition.


One Caveat: before going further, you should understand
the concept of C++'s true and false, because it will be
necessary when working with loops (the conditions are the
same as with if statements).

Three types of Loops:
for, while, and do..


FOR
For ( variable initialization; condition; variable update ) {
Code to execute while the condition is true
}


The variable initialization allows you to either declare a variable and
give it a value or give a value to an already existing variable. Second, the
condition tells the program that while the conditional expression is true
the loop should continue to repeat itself. The variable update section is
the easiest way for a for loop to handle changing of the variable. It is
possible to do things like x++, x = x + 10, or even x = random ( 5 ), and if
you really wanted to, you could call other functions that do nothing to the
variable but still have a useful effect on the code.

Notice that a semicolon separates each of these sections, that is
important. Also note that every single one of the sections may be empty,
though the semicolons still have to be there. If the condition is empty, it is
evaluated as true and the loop will repeat until something else stops it.


Example:
#include <iostream>

using namespace std; // So the program can see cout and endl

int main()
{
// The loop goes while x < 10, and x increases by one every loop
for ( int x = 0; x < 10; x++ ) {
// Keep in mind that the loop condition checks
// the conditional statement before it loops again.
// consequently, when x equals 10 the loop breaks.
// x is updated before the condition is checked.
cout<< x <<endl;
}
cin.get();
}

This program is a very simple example of a for loop. x is set to zero, while
x is less than 10 it calls cout<< x <<endl; and it adds 1 to x until the
condition is met. Keep in mind also that the variable is incremented
after the code in the loop is run for the first time.


WHILE
The basic structure:

While ( condition ) { Code to execute while the condition is true }
The true represents a boolean expression which could be x == 1
or while ( x != 7 ) (x does not equal 7). It can be any combination
of boolean statements that are legal. Even, (while x ==5 || v ==
7) which says execute the code while x equals five or while v
equals 7. Notice that a while loop is the same as a for loop
without the initialization and update sections. However, an
empty condition is not legal for a while loop as it is with a for
loop.


Example:
#include <iostream>

using namespace std; // So we can see cout and endl

int main()
{
int x = 0; // Don't forget to declare variables

while ( x < 10 ) { // While x is less than 10
cout<< x <<endl;
x++; // Update x so the condition can be met eventually
}
cin.get();
}

The easiest way to think of the loop is that when it reaches the brace at the
end it jumps back up to the beginning of the loop, which checks the condition
again and decides whether to repeat the block another time, or stop and move
to the next statement after the block.


DO..WHILE
are useful for things that want to loop at least once.

The Structure:
do {
} while ( condition ) ;


Notice that the condition is tested at the end of the block
instead of the beginning, so the block will be executed at least
once. If the condition is true, we jump back to the beginning
of the block and execute it again. A do..while loop is basically
a reversed while loop. A while loop says "Loop while the
condition is true, and execute this block of code", a do..while
loop says "Execute this block of code, and loop while the
condition is true".


Example:
#include <iostream>


int main()
{
int x;

x = 0;
do {
// "Hello, world!" is printed at least one time
// even though the condition is false
cout<<"Hello, world!n";
} while ( x != 0 );
cin.get();
}

Keep in mind that you must include a trailing semi-colon after the while in the
above example. A common error is to forget that a do..while loop must be
terminated with a semicolon (the other loops should not be terminated with a
semicolon, adding to the confusion). Notice that this loop will execute once,
because it automatically executes before checking the condition.


CODES AND EXPLANATIONS OF THE
PROGRAMS HAVE BEEN TESTED


LOOPING STATEMENT 1
#include <iostream>

int main()
{

// nSelection must be declared outside do/while loop
int nSelection;

do
{
cout << "Please make a selection: " << endl;
cout << "1) Addition" << endl;
cout << "2) Subtraction" << endl;
cout << "3) Multiplication" << endl;
cout << "4) Division" << endl;
cin >> nSelection;
} while (nSelection != 1 && nSelection != 2 &&
nSelection != 3 && nSelection != 4);

// do something with nSelection here
// such as a switch statement

return 0;
}


LOOPING STAEMENT 2
#include <iostream>
int main()
{
int nSelection;
double var1, var2;

do
{
cin >> nSelection;
}

while (nSelection != 1 && nSelection != 2 &&
nSelection != 3 && nSelection != 4);

if (nSelection == 1)
{
cout << "Please enter the first whole number ";
cin >> var1;
cout << "Please enter the second whole number ";
cin >> var2;
cout << "The result is " << (var1+var2) << endl;
}


LOOPING STATEMENT 3
{
cin >> var1;
cin >> var2;
cout << "The result is " << (var1-var2) << endl;
}
{
cin >> var1;
cin >> var2;
cout << "The result is " << (var1*var2) << endl;
}
{
cin >> var1;
cin >> var2;
cout << "The result is " << (var1/var2) << endl;
}

return 0;
}


LOOPING STATEMENT 3
#include <iostream>
int main()
{
int nSelection;
double var1, var2;
while (1)
{
do
{
cout << "5) Exit" << endl;
cin >> nSelection;
} while (nSelection != 1 && nSelection != 2 &&
nSelection != 3 && nSelection != 4 &&
nSelection != 5);

{
cin >> var1;
cin >> var2;
cout << "The result is " << (var1+var2) << endl;
}


LOOPING STATEMENT 4
else if (nSelection == 2)
{
cin >> var1;
cin >> var2;
cout << "The result is " << (var1-var2) << endl;
}
{
cin >> var1;
cin >> var2;
cout << "The result is " << (var1*var2) << endl;
}
{
cin >> var1;
cin >> var2;
cout << "The result is " << (var1/var2) << endl;
}
else
{
return 0;
}
}
}


LOOPING STATEMENT 5
#include <iostream>

using namespace std; // So the program can see cout and endl

int main()
{
// The loop goes while x < 10, and x increases by one every loop
for ( int x = 0; x < 10; x++ ) {
// Keep in mind that the loop condition checks
// the conditional statement before it loops again.
// consequently, when x equals 10 the loop breaks.
// x is updated before the condition is checked.
cout<< x <<endl;
}
cin.get();
}


LOOPING STATEMENT 6
#include <iostream>


int main()
{
int x;

x = 0;
do {
// "Hello, world!" is printed at least one time
// even though the condition is false
cout<<"Hello, world!n";
} while ( x != 0 );
cin.get();
}


LOOPING STATEMENT 7
#include <iostream>

int main ()
{
int n;
cout << "Enter the starting number > ";
cin >> n;

while (n>0) {
cout << n << ", ";
--n;
}

cout << "FIRE!n";
return 0;
}


SWITCH CASE 1

SWITCH CASE
#include <iostream>


int main ()

{

int score;

cout << "What was your score?";

cin >> score;

if (score <= 25)

{

cout << "nOuch, less than 25...!";

}


SWITCH CASE 2
else if (score <= 50)

{

cout << "nYou score aint great mate..";

}


{

cout << "nYour pretty good, wel done man!";

}


{

cout << "nYou got to the top!!!";

}


SWITCH CASE 3
else

{

cout << "nYou cant score higher than 100!!! Cheater!!!!";

}

cin.ignore();

cin.get();

return 0;

}


SWITCH CASE 4

#include <iostream>


int main(){
cout << "Enter a number between 1 and 5!" << endl;
int number;
cin >> number;
if(number == 1){
cout << "one";
}
else if(number == 2){
cout << "two";
}
cout << "three";
}
cout << "four";
}
cout << "five";
}
else{
cout << number << " is not between 1 and 5!";
}
cout << endl;
system("pause");
}


SWITCH CASE 5

#include <iostream>
int main()
{
int price_before_discount, RM, dozen, total_price;

cout<< "How much is the price before discount for 1 dozen boxes of tissue?n";
cout<<"RM ";
cin>>price_before_discount;
cout<<"nn";

cout<< "How many dozen boxes of tissue you buy?n";
cin>>dozen;
cout<<"nn";

switch (dozen)
{
total_price = ((price_before_discount*dozen) * (95/100));
case '1': cout<< "Total price is RM ";
cout<<RM;
cout<<"nn";
break;

cout<<RM;
cout<<"nn";
break;

cout<<RM;
cout<<"nn";
break;

case '4' : cout<< "Total price is RM ";
cout<<RM;
cout<<"nn";
break;

default : cout<< "Total price is RM ";
cout<<RM;
cout<<"nn";
}

return 0;
}


SWITCH CASE 6
#include <stdlib.h>
#include <stdio.h>

int main(void) {
int n;
printf("Please enter a number: ");
scanf("%d", &n);
switch (n) {
case 1: {
printf("n is equal to 1!n");
break;
}
case 2: {
break;
}
case 3: {
break;
}
default: {
printf("n isn't equal to 1, 2, or 3.n");
break;
}
}
system("PAUSE");
return 0;
}


SWITCH CASE 7

#include <iostream>
int main(void)
{
char grade;
cout << "Enter your grade: ";
cin >> grade;
switch (grade)
{
case 'A':
cout << "Your average must be between 90 - 100"
<< endl;
break;
case 'B':
<< endl;
break;
case 'C':
<< endl;
break;
case 'D':
<< endl;
break;
default:
cout << "Your average must be below 60" << endl;
}
return 0;
}


AN OUTPUT
PROGRAM USING DEV C++


In this looping statement, I used “while” looping, and I choose to show MDAS
just as an example for the program to run.


This looping statement


Submitted to:
Prof. Erwin Globio

Submitted by:
Tarun, April G. BM10203


Switch case and looping

More Related Content

What's hot (20)

Viewers also liked (6)

Similar to Switch case and looping (20)

Recently uploaded (20)

Switch case and looping