Tagging methods for stock assessment and research in fisheries

Tagging methods for stock assessment and research in fisheries

• 1.
  Page | 1 TaggingMethods For Stock Assessment and Research In Fisheries INTRODUCTION Systematic tagging of fish for scientific purposes has been conducted for more than a century. When it was started, this new approach represented an exciting methodology for obtaining fundamentally new information about fish migration and movements as well as on the dynamics of exploited fish population. However, it is now clear that tagging has not developed as an extensively-used method for monitoring and management of major European commercial fish stocks in the way that might have been expected. Undoubtedly, much effort has been invested in tagging experiments, but the results have generally only been used for qualitative evaluation of distribution patterns. Instead, fisheries management has tended to focus on statistical analysis based on a variety of modeling approaches, often based on expensive sampling programmers or catch data. A major reason for the underutilization of tagging in the quantitative evaluation of fish stocks has been uncertainty about data quality. RATIONALE AND OBJECTIVES Scientific assessments form the basis of fish stock management for the major commercial stocks of European fresh and saline waters. One of the available tools for assessment consists of tagging. In stock assessment, fish caught in a fishery are tagged, released back into the environment and allowed to mix thoroughly with the rest of the population. At some time later both tagged and untagged fish are caught in the fishery. Stock enhancement programs have become an integral part of present approaches to both population conservation and compensatory releases to maintain fisheries. An important European issue in this context is the impact of salmonid aquaculture on wild populations. Tagging techniques in general, and the application of new technology in particular, may provide useful tools for the evaluation of the benefits of stocking exercises. The CATAG concerted action (CA) had three objectives: • To assess the past, present and future use of tags • To assess reliability of tagging methods with emphasis on their application in fisheries research and stock assessment • To facilitate improvements in tagging methodology and application
• 2.
  Page | 2 GENERALCONCERNS There are several subjects in tagging that are independent of tag type, species and area. These include strategic planning and decisions made prior to tagging, proper sampling of fish for tagging, treatment of fish during the tagging process, and finally, efficient means of obtaining consistent high quality recapture information. These are all crucial aspects for the success of a tagging programme that tend to be overlooked or may be considered too late to be dealt with in an appropriate way. STRATEGIC PLANNING OF TAGGING PROGRAMMES There are some general aspects that should be considered when planning a tagging operation. A careful assessment of the objectives, relating them to a cost/benefit analysis is useful before deciding on the most appropriate tags and tagging methods. Legislation governing tagging practice is not something that many think about when planning a tagging experiment. It is important though to look at general legislation which concerns tagging because this may save problems at a later stage when the experiment is in full swing or when it is published. This report has a special section devoted to the legislative control of tagging in various European countries. In planning tagging procedures it should be appreciated that the handling time for each fish needs to be short. This is necessary for better fish survival, and also for the economy of the project. If a method is used for the first time it is very important to practice or rehearse the tagging procedures, to minimize handling time. In planning for each tagging or marking programme one should check if the local tag recovery and refunding system applies to the recaptured tags derived from the programme, or if some special arrangements have to be made. TREATMENT OF FISH DURING CAPTURE, TAGGING AND RELEASE The worker should be concerned with the wellbeing of the fish during the time it is in the fishing gear, hauled aboard a vessel, maintained within a holding tank, tagged or marked and then released. Capture of fish for tagging: The most important consideration during capture is the survival of the fish to be tagged or marked. Different species of fish vary a great deal in how vulnerable they are when handled. Some, like plaice, can endure much handling without problems. Others can hardly be touched without their life expectancy being greatly reduced. Fish for tagging can be obtained by any conventional capture methods, but the suitability of
• 3.
  Page | 3 thecatching method may vary and one should survey the best methods available for catching the fish. When fish are using much energy during ‘flight or fright’ reactions, lactic acid is produced by glycolysis in the muscles. An excess of this can build up in the blood if the fish does not have time to recover. Commercial fishing methods are normally designed to optimise harvest and not to keep fish alive and healthy. This means that individual fish may have been stressed for long periods in the gear and thus become less fit for tagging. Soaking time for stationary fishing gears should therefore be limited, while towing times for active fishing gears, such as trawls, should be reduced. Seasonal variation in vulnerability to stress and/or damage during the tagging process can lead to incompatibility between experiments and obviate comparison. This factor should be taken into account during planning. It should also be appreciated that trawls and other active fishing gears can cause considerable damage to fish. This can stem from the spines of fish or invertebrates such as sea urchins, entrained rocks or sharp garbage items, or may stem from the fishing gear itself. Treatment before, during and after tagging The following factors need to be considered: Quality of water in holding tanks (freshness, oxygen content, temperature) Suitability of the holding tank design (depth of water, space, texture) The nature and concentration of necessary anaesthetics or pacifiers Sterilising media for treating wounds Sufficient immobilisation of the fish (tagging cradles, troughs or holders; Jones, 1979) Adequate recovery time after anaesthesia Appropriate conditions for releasing the fish, in particular their vulnerability to the dropping from too great a height into the water; predation (from other fish, mammals and birds); fishing gear or propellers; violent movements of the boat TAG AND MARK TYPES External tags and marks are used to identify a group of fish or a number of individual fish. They are easy to detect, usually without special equipment or knowledge. Internal tags or marks are mostly not visible from the outside and may need special equipment or intrusive methods to be detected to identify individual or groups of fish. An advantage of internal tags or marks is that in some cases a large number of fish
• 4.
  Page | 4 maybe tagged simultaneously and at a very early stage of the life history. An external tag or mark may be used to call attention to the presence of an internal tag or mark. APPLICATION OF METHODS External tags External tags are defined as visible tags applied externally on the fish. It follows that the tag is easily detectable and no special equipment is required for detection. These types of tags may carry an individual code, a batch code and/or visible instructions for reporting. Examples of these types of tag include ribbons, threads, wires, plates, disks, dangling tags and straps. (a) Advantages  Inexpensive, or simple to produce, which may make their use cost effective  Easy and fast to apply, requiring only simple technology for the application  Useable for a large range of fish sizes (depending mainly on the size of the tag)  Applicable to large numbers of fish and to a great range of species  Easily detected due to the exterior attachment  Numbered tags enable the identification of individual fish  Provide space for printing information and encouragement of tag-returns from all fisheries, which is a cost-effective reporting method  Can give a broad geographical and seasonal return distribution  Because of low cost, can provide a large number of returns, and sufficient data for statistical analysis and assessment  Long tag-retention time (depending on the type of tag) (b) Disadvantages Information is limited to identification of the fish and its origin, i.e. reporting does not provide information on the fish during the interim period from release until recapture  Precision of the information on recoveries may be variable, since recoveries often come from all fisheries  Return rates may be variable, since they often depend on reporting from all fisheries • May affect growth, health and survival, due to penetration of the skin, providing an access route for infections, and due to the continuous drag on the tag if this protrudes from the fish  Fouling of the tags may be a problem. Overgrowth of algae, barnacles and mussels may increase the drag on the tag considerably and may also make detection difficult  May become entangled in aquatic vegetation or in fishing gear
• 5.
  Page | 5 Tag losses may be high, depending on tag type, fish species and experience of the tagging personnel  Can be difficult to apply or may not be applicable to very small fish  May affect behaviour and swimming/hiding performance of the fish External marks An external mark may be defined as a mark visible on the outside of the fish and employed to identify individual fish or groups of fish, but without any information regarding reporting format. Examples of external marks are visible modifications of the fish body (or fins), pigments, dyes, stains, brands, and meristic or morphometric characteristics. External marks are mostly used to identify a small number of individual fish or to distinguish between larger groups of fish. The techniques are suitable for field studies in relatively confined areas where recoveries are controlled by the institute that has conducted the marking. (a) Advantages  Marks are inexpensive and usually rapid to apply; this makes their use popular for many types of studies  They are ideal for identification of separate populations or batches  They are usually simple to apply and personnel may not need to be specially trained • Little or no effect on fish growth, health and behaviour is produced  Marks can be suitable for a range of sizes, since the fish do not have to carry a tag  Marks may have long duration, depending on the type of mark  They can be applicable to large numbers of fish and to many species (b) Disadvantages  A limited number of codes or combinations are possible  Returns from a broad geographical area and for a long span of time e.g. commercial or recreational fisheries - cannot be expected  In most cases researchers or surveyors have to recover the marked fish themselves  There are possibilities for recognition errors, due to confusion between marks  Marks may deteriorate with time
• 6.
  Page | 6 Internaltags: Most of them, including Coded Wire Tags (CWTs), have to be removed from the fish to be identified, but the more advanced ones, such as Passive Integrated Transponder Tags (PIT tags) can be read without removing the tag, thus providing a completely non-destructive means of identification . Examples of internal tags include plastic or glass tubes, metal plates, small pieces of magnetised metal (CWTs) or semi-electronic tags transmitting information (by radio waves) when an electrical current is induced (PIT tags). The advantages and disadvantages of internal tags are summarised as follows: (a) Advantages  Tags have little or no effect on growth, health and survival  They are suitable for a wide range of sizes and many species of fish  High retention rates are exhibited  With suitable equipment, very large numbers of fish may be tagged by semi- or fully automated tagging procedures with minimal handling of the fish (CWTs)  Individual recognition of fish is possible  Repetitive and non-destructive recoveries are feasible (PIT tags) (b) Disadvantages  Expensive equipment is required for tag application and detection (CWT, MCT, PIT)  Expert personnel are needed for tagging (and retrieval of CWTs)  Recovery of specimens of fish may be labour-intensive (CWTs)  Tag retrieval and identification can be labour-intensive (CWT)  Tag migration within the body of tagged fish may reduce the probability of recognition (CWTs) Internal marks Internal marks may be defined as marks not visible from the outside of the fish. Internal marks are either naturally-occurring or artificially produced marks, that characterise either individuals or, more often, groups of fish. Often they are marks in the bony structure, and may be produced in various ways. Internal marking is most often applied to batches of fish, when marking needs to be done in a very mild and non-invasive fashion, and when it is acceptable that recovery of information necessarily involves sacrificing or damaging the fish.
• 7.
  Page | 7 Advantagesand disadvantages of internal marks are summarised below: (a) Advantages  There are minimal immediate effects from handling and marking.  Chemical marking is most often carried out by submersion in a chemical solution, or by adding a chemical to the feed so is simple, rapid, inexpensive and applicable to very large numbers of fish.  Distinct growth patterns are produced in the natural environment and can be induced through a strictlycontrolled temperature regime.  Natural marks are, by definition, carried by the fish, so no extra marking or additional handling is needed.  Effects on behaviour, growth, health and survival of fish are minimal (often absent). • Normally the techniques are applicable to a wide range of fish sizes. (b) Disadvantages  Recovery usually requires sacrificing fish (for example for the removal of otoliths).  Recovery and analysis may be expensive, very time- and labour- consuming, and consequently may not be cost effective.  Analysis demands expert personnel and specialised laboratory facilities.  Marking natural populations chemically requires holding fish for a period of time long enough to produce the marks - this has resource/space implications.  The techniques can be difficult to apply to natural populations in field studies. Biological (Natural Methods) Parasitic Marks- Used to identify stocked fish and determining movement or migration patterns. Advantages are they have low survey costs, can be used on large bodies of water and are natural. Some disadvantages-time to determine if parasite can be a mark, identification of individuals is not always possible, trained personnel are required, and mathematical errors can occur. Morphological Marks- Used to differentiate stocked fish and for mark recapture studies. One advantage is the low cost and one disadvantage is that markings are subject to environmental conditions which can change physical characteristics and overlapping of genotypic characteristics of populations. Some examples are meristic counts, pigmentation, proportional body parts of body parts; shape, size, age marks of
• 8.
  Page | 8 otolithsor scales, and chemical compositions of scales or bony parts, and internal marks on scale. Genetic Marks- Used to identify fish stock. One advantage is the effectiveness in identifying fish stocks compared to morphological methods while a disadvantage is in preserving blood samples and developing reagents and equipment. Another disadvantage is the analysis can be costly. Two examples are electrophoresis and serological method. GENERAL APPLICABILITY Tagging or marking fish with ID tags or marks has wide applicability and is used to study population dynamics of fish stocks or populations. External and internal tags have been used in studies to determine growth, or to estimate von Bertalanffy growth curves in natural populations. Chemical (immersion, injecting, tattooing, or feeding) Advantages- Low cost, decreased handling time, large numbers can be marked, and possible to mark smaller species. Disadvantages- Individual organisms not being recognized and retention tends to be brief because growth can disperse the marker and differs between species as well as between methods. Immersion- Staining by this technique allows a large number of fish to be marked. Retention of the mark can become a problem depending on age, size, water chemistry, temperature, concentrations of chemical, and duration of immersion. It is also important to look at toxicity of the chemical in certain concentrations as well as any effects marking will have on predation or reduced survival. Injection-Consideration should be taken with diffusion of the substance, concentration of substance, and location of injection. Possible problems are injecting into internal organs and time it takes to inject each fish. Feeding-Works well in laboratory and hatchery settings where fish can be monitored and feed the dyes. Without monitoring the fish problems can occur where some individuals do not feed as much as others and the marker is not as clearly recognized. Various dyes and chemicals have been used with a varying degree of success.
• 9.
  Page | 9 Chemicals Alizarin(ALC) - One advantage is the low mortality rate. ALC is an effective way to mark fish however is more costly than OTC. One disadvantage is the cost of the chemical. Oxytetracycline (OTC) - Advantages are less costly, marks are reliably produced, few if any mortalities, and can be used on salt water fish. Some disadvantages are the time it takes to produce the mark and the equipment needed to identify the mark. Calcein- Two disadvantages are less reliable in producing marks on fish and it also has a higher mortality rate. Commonly used tag types and their attachment sites. Internal Advantages-Do not protrude from the body and do not require any removal of parts of the fish. They can be inexpensive, non-toxic, and put less stress on the fish compared to some other tagging methods Disadvantages-Trained personnel are necessary at times and recovery is extremely difficult. Types Body Cavity tags- First used in flounders during the 1930s, metal anchors were placed in body cavities to later identify. Strong magnets recover the tags; however recovery is difficult. If tags are placed before spawning has occurred fish can expel the tags and machinery can destroy the tags before the magnets can detect them. Subcutaneous tags-Inexpensive plastic discs imprinted with serial numbers and legends in order to identify individual fish. Discs are planted in between the outer layer of skin and muscles by a small incision. Using this technique normally requires the use of another mark to identify that a subcutaneous tag was inserted inside the fish. Coded Wire tags-A small piece of wire injected into a fish using small applicators or by hand. These tags can be placed in the snout, necks, caudal fins, and any other muscular area. The tags can be detected with a sensitive metal detector or an x-ray, which can show color-coded wires or notches that are used to identify specific groups of fish. The equipment used to tag and detect the wires are very expensive, however using this technique allow fish to be tagged quickly, easily, and without altering behaviors.
• 10.
  Page | 10 Fig:Codedwire tag in nose of fish. Microtags-Originally used to identify explosives, microtags are microscopic plastic chips which contain seven layers of plastic that can be color coded to identify groups of fish much like coded wire tags. There are 300 million color combinations that can be used. They can also contain a fluorescent or magnetic layer. Passive Integrated Transponder tags (PIT) - many researchers use PIT tags and readers to study migration habits and movement to and from specified areas. A PIT tag is a radio frequency device that transmits a unique individual code to a reader where it is displayed in a numeric or alphanumeric form. The tag has no internal battery, hence the term “passive". The reader powers or excites the tag circuitry by radio frequency induction and receives the code back from the tag. Radio frequency identification does not require line of sight, tags can be read as long as they are within the range of a reader. PIT tags were designed for positive identification; because they are passive they are not capable of long-distance tracking. The implant site is dependent upon the species, size of the animal and the size of the tag. Thermal Tags- Thermal marking is an efficient means of marking 100% of the fish at the hatchery. Therefore, we can take fish that have been thermal marked, remove its otoliths or ear bones and tell whether or not it is a hatchery fish. The hatchery fish are marked prior to hatch or soon thereafter in incubators. By manipulating the water temperature in the incubators, hatchery technicians can place a series of rings on the otoliths that will identify them by hatchery and brood year. This process forms a type of "bar code" on the otolith that remains with the fish for its lifetime. These patterns of bands can be customized for each hatchery and brood year by varying the number of bands and the width and spatial placement of these bands. Fig: Image of a thermally marked otolith with a pattern of five dark bands (near center).
• 11.
  Page | 11 Radiotags- tags that transmit radio signals to a receiver. Radio tags are used most often in shallow, low-conductivity water. Antennas that receive the transmitter signals can be fixed to airplanes, boats, trucks, snowmobiles, and portable towers or can be carried along a stream by hand. Sonar tags- hydrostatic tag in which detailed instruction are placed inside a plastic capsule that is attached by a wire to the fish. Identification of the fish or fish group together with reporting instructions. DST GPS Fish Tag, Fish Positioning Sounder and Simrad GPS Sonar Data Storage tag (DST) Global Positioning System (GPS) can be attached externally or implanted into fish. DST GPS can receive information about geographic position from satellites via Simrad sonars onboard vessels. The vessel's GPS position is coded and transmitted underwater via the Simrad sonar signal. If a tagged fish is within 4 km range of the GPS sonar, the DST GPS will receive the vessel's geographical position and store the GPS information together with measured temperature, depth and date/time. For use in rivers, lakes and smaller ocean areas, a small and portable acoustic GPS transmitter, named Fish Positioning Sounder (FPS). The DST GPS fits well for medium sized round fish. Advantages The GPS Fish Positioning System will increase knowledge on fish migratory routes, and provide major contribution to sustainable management of fish resources. Data for improving stock assessment and management, for stock models, accessibility and availability of fish resources, behavior analysis, migration and distribution and Salmon and anadromous trout and charr, coastal migration. Disadvantages Requires expensive equipment for locating fish. Time Consuming on insertion of tag internally by surgery. Need skilled personnel for surgical procedure. Fish need to be fairly big in size and room in body cavity for tag to be inserted. External Advantages-They can be seen without dissection of the fish. Also many external tags allow for individual recognition. Disadvantages-Main disadvantage is that they can cause higher mortality by attracting predators, interfere with locomotion by protruding, and make the organism more susceptible to disease and infection.
• 12.
  Page | 12 Types Mutilation-clipping or punching fins or other body parts are a type of mutilation that can be used to later identify individuals. This is a simple and quick technique that is very inexpensive to use. Although some marks can remain permanent, others like fins can regenerate. Even though fins can regenerate they often are distorted and can be identified as marked. One problem with mutilation is the possibility of negatively affecting the fish’s behavior and ability to survive. Fig: Example of a mutilation mark (adipose fin clip). Branding- uses hot or cold instruments against the body of a fish in order to produce an identifiable mark for recognition. One advantage of branding is no changes are made to the body or fins of the fish. The main disadvantage over time is that the mark becomes unrecognizable. When branding it is important to consider the type of scales, age, temperature of the branding tool, total time the branding takes, and the cost of equipment.
• 13.
  Page | 13 VisableImplant Elastomer (VIE)- tags are injected as liquid that soon cure into a pliable, biocompatible solid. They are implanted beneath transparent tissue and remain externally visible. Fig: VIE tag implanted behind eye of a coho salmon. Petersen discs- these tags were used during the first 60 years of tagging. Although tag construction has changed from different types of material and less expensive the application and design of the tag have remained unchanged. You apply the disc under the dorsal fin of the fish with a pin and pliers. There is various length of use of fish of difference thicknesses. The Peterson disc has also been used on mollusks by gluing to the shells with epoxy cement. Peterson disc remain on the animal for life. Disadvantage is long application time pre tag. Fig: Peterson disc below the dorsal fin of a warmouth. Paper fasteners- Paper fasteners can be used like strap tags for short-term marks. You can purchase these at an Office supply store and paint with fast-drying spray paint for easy detection. Paper fasteners are easy to apply and easy to remove. Paper fasteners work best on fish with bony opercles. Strap tags- strap tags are made of light-weight, noncorrosive metal, come in all different sizes and are serially numbered. Strap tags are easily attached to fish. Straps are attached to different locations of the fish body; opercles, fins, and caudal peduncle. Strap tags are used on a variety of species, are permanent tags on some fish. Best retention results are with fish with bony opercles such as Sturgeon, flounder, and halibut.
• 14.
  Page | 14 Danglertags- consist of a dangling tag (with information on it) attached by wire to the fish. Dangler tags that are applied close to the body and are streamlined are retained well and can remain on fish for life. Dangler tags are best suited for small studies involving few fish because applying take a great decal of time. Carlin tag- the disc carries individual identification of the fish and reporting instructions and can be used for short-term experiments, but is ideal for long-term experiments. Carlin tags are very common in monitoring and research work. A smaller version of the tag is the fingerling tag has been developed to use on small and juvenile fish. Easy to apply the Carlin tag and requires few tools. The Carlin tag (Carlin 1955) consists of a plastic disc attached to the fish body with stainless steel wire or polythene thread. Between the attachment to the fish and the disc there is an intermediate link which allows tagging of younger fish for visual recapture as adults. Spaghetti tag-is a loop of vinyl tubing that passes though the fish. Information is printed directly on the tubing. Attachment for the tag is by threading tubing through the body of the fish with a hollow needle. Two variation of the tag are lock-on and cinch-up tags, which use special locking devices instead of a knot. The tag is retained well and inexpensive, but application is time-consuming. Dart tags- made of nylon shaft with a barbed end and a vinyl tube that fist over the upper end of the shaft. The barbed end of the shaft holds the tag in the fish and the tube contains the tag information. Anchor tag (Floy tags)- applicable for long-term studies on migration on adult migratory species. This tag is a modified dart tag in which a nylon T-bar replaces the harpoon like head of the dart tag. These tags are exactly like tags used to attach prices to clothing. The tags are inserted with a gun which can be loaded with one or a clip of anchor tags, marking the tagging of individuals or hundreds of organisms quick and easy. Like dart tags it is important that anchor tags penetrate deep enough into the fish that the T-bar interlocks with the skeleton. Electromagnetic tags At frequencies below the VHF radio band (wavelength 1-10 m), antenna dimensions are too large to be useful for most animal telemetry (Priede, 1992). However, low frequencies have the advantage that the magnetic component of the electromagnetic wave penetrates seawater and solid rock to a significant degree (Dunbar, 1972), without the attenuation and reflection experienced by acoustic signals. Pulsed tags Radio and acoustic transmitting tags can transmit a simple pulsed signal at a selected pulse rate. Theoretically, large numbers of fish can be monitored simultaneously,
• 15.
  Page | 15 usingmultiple frequencies or pulse rates. In practice, however, it is very difficult to distinguish more than four or five pulse rates on an individual frequency. Transponding acoustic tags A transponding tag allows the position of a free-ranging fish to be fixed accurately relative to a research vessel (e.g. Greer Walker et al., 1978). Transponding tags differ from other electronic tags in that they only transmit an acoustic signal when they receive an interrogation pulse from a sonar (e.g. Mitson & Storeton-West, 1971). Ultrasonic frequencies are produced by stimulating an annular ceramic transducer at its resonant frequency. Tag size is governed by the size of the transducer, whose diameter is inversely proportional to frequency. Range also varies inversely with frequency, so that, while a large diameter 30 kHz tag may have a range in excess of 1 km, a small 300 kHz tag usually has a range of less than 400 m. Data Storage Tags (DSTs) These tags, which are also known as archival tags, range from simple data loggers, capable merely of recording depth or temperature, to sophisticated programmable devices capable of providing a direct estimate of the geographical position of the fish at regular intervals over periods of many months. Developmental work over the last ten years has led to the production of a number of tags that are beginning to be used very successfully with free-ranging fish in the open sea. TAG ATTACHMENT METHODS External attachment Internal tagging is not feasible with flatfish, such as plaice (Pleuronectes platessa), which have a tightly coiled gut and a small peritoneum; for these species external tagging is essential. External tagging may also be desirable in other species for reasons of tag or data recovery, even though internal tagging may be possible biologically. External tagging is simpler and quicker than most internal tagging, avoids surgery and anesthesia and may also entail a shorter refractory period. It may also be essential with sharks and large pelagic fish, such as tuna, marlin, and swordfish when it is not possible to catch the fish or bring it on board. External tags may be attached directly to the surface of the fish, or by a trailing lead that allows the tag to stream free when the fish is swimming.
• 16.
  Page | 16 Fig:External and internal methods for attaching electronic tags to sharks (rcdrawn from Nclson. 1978). Application by barbcd dart and scifingestion are accomplished without capturing the shark. Fig: Method of attaching electronic tags to salmonid fìsh: (a) extemal; (b) stomach (c) peritoneum.
• 17.
  Page | 17 Fig:Attachment of a radio tag to an adult Chinook salmon (Oncorhvnchus tshawvtscha), illustrating the typical method of attaching an electronic tag alongside the dorsal fin (redrawn from Gray & Haynes. 1979). Fig: Attachment of an acoustic tag to the back of tuna using two nylon tie wraps inserted through the dorsal muscles and pterygophores (redrawn from Holland et aL. 1985). LIMITATIONS AND RESTRAINTS Although tagging in most cases can be done without seriously affecting fish health and behaviour it must be remembered that no single type of tag or mark is perfect; each has its advantages and disadvantages. In particular, external tags may cause health problems for tagged fish as the application implies penetration of the body and dangling tags may cause continuous irritation and access for microbial infections.
• 18.
  Page | 18 Tagsand marks may be lost or deteriorate during the period from tagging to recapture. Tag losses could result in data misinterpretation. Gathering of data may also be hampered by factors beyond the influence of the marker, such as low or irregular return rates from different fisheries. The fishery pattern (type, distribution, effort, etc.) in the release/recapture area may also influence the distribution of recaptures and thus bias results on migration or distribution. In order to obtain sufficient data for analysis, an adequate number of fish must be tagged or marked. INFLUENCE ON BEHAVIOUR, GROWTH AND GENERAL HEALTH Ideally behaviour, growth and survival of tagged and untagged fish are similar. While this may be true to many types of tags and marks, external tags especially may affect behaviour and survival. For example, fish with external tags may be more vulnerable to predation, or growth may be affected. By permanently penetrating the skin the tag may provide an access route for infection. Additionally, tags may become overgrown with algae, barnacles or mussels, adding weight to the tag and increasing drag. Tagging or marking of fish involves treatment and handling, which disturbs and possibly stress the fish. Careful handling procedures throughout the capture and marking process are of highest importance. REQUIREMENTS AND RECOMMENDATIONS Protocols for optimal handling procedures throughout the capture, and marking process need to be made and updated for different species. National and international courses on tagging procedures are recommended. Choice of tag or mark type should be made after a cost-benefit analysis of the individual method including the marking and recovery costs as well as the quality of data required. Simple and cheap ID tags are recommended in preliminary studies to estimate potential return rates before embarking on studies using more sophisticated and expensive tags or marks. Simple external ID tags or marks should be used to indicate the presence of internal tags or marks. Simple ID tags or marks should also be employed in mixed tag experiments, but not only to indicate the presence of electronic tags. Programmes involving electronic tags should also incorporate fish tagged with simple tags or marks to provide better information on reporting rates than would be feasible if expensive electronic tags alone were used.
• 19.
  Page | 19 Thereis a need for further development of existing tag types. A particular concern is that fouling problems should be addressed - biofouling of tags may be a significant problem in tagging studies, but has been little studied. The value of tagging or marking is crucially dependent on how precise and comprehensive the information on the recovery is. The number of fish being tagged must be large enough to take into account the expected recapture, recovery or reporting rate. A number of measures could be taken to improve reporting rate. These include the following:  Adequate rewards for returning the tag  Advertisements to further stimulate reporting  Direct communication with local fishermen  Regular information bulletins on the progress of the project  Prompt response to persons returning or reporting tags  Anonymity should be guaranteed for those reporting on recaptures CONCLUSION: Tagging and marking fish are essential techniques for any fisheries biologist. Marking a fish allows biologists to gather a wide variety of information. Certain marking techniques allow fish to be tracked giving biologists a better understanding of movement and migration patterns. Other mark and recapture methods provide population estimates, fish growth, and estimates of fish and natural mortality.
• 20.
  Page | 20 References: Akinicheva, E.G. and Rogatnykh, AYu. 1996. Experience in thermal marking of salmons at hatcheries. Voprosy Ikhtiologii 1996 vol. 36(5): 693-698.  Bannister, R.C.A., Addison, J.T. and Lovewell, S.R.J. 1994. Growth, movement, recapture rate and survival of hatcheryreared lobsters (Homarus gammarus Linnaeus, 1758) released into the wild on the English east coast. Crustaceana, 67: 156-172.  Bartel, R., Auvinen, H., Ikonen,E. and Sych, R. 1987. Comparison of six types in sea-trout tagging experiments in the Baltic area. ICES CM 1987/M:24  Bergman, P.K., Haw, F., Blankenship, H.L. and Buckley, R.M. 1992. Perspectives on design, use and misuse of fish tags. Fisheries. 17(4): 20-25.  Bisgaard, J. and Pedersen, M.I. 1991. Mortality and growth of wild and introduced cultured eels (Anguilla anguilla, L) in a Danish stream. Dana 9: 57-69.  Brothers, E.B. 1990. Otolith marking. American Fisheries Society Symposium 7: 183-202.  Buckley, R.M. and Blankenship, H.L. 1990. Internal extrinsic indentification systems: overview of implanted wire tags, otolith marks, and parasites. American Fisheries Society Symposium 7: 173-182.  Carlin, B. 1955. Tagging of salmon smolts in the River Lagan. Report of the Institute of Freshwater Research, Drottningholm. 36: 57-74.  Carlin, B. 1969. Salmon tagging experiments. Swedish Salmon Research Institute Report 3/1969.  Coombs, K.A., Bailey, J.K., Herbinger, C.M. and Friars, G.W. 1990. Evaluation of various external marking techniques for Atlantic salmon. American Fisheries Society Symposium 7: 521-540  Davenport, J. 1989. Feeding, oxygen uptake, ventilation and shell growth in Yoldia eightsi. B.A.S. Occasional Publication Series: Antarctic Research Special Topic Symposium: 57-63.  Davenport, J., Ekaratne, S.U.K., Lee, D. and Hills, J.M. 1999. Successful stock enhancement of a lagoon prawn fishery at Rekawa, Sri Lanka using cultured penaeid shrimp postlarvae. Aquaculture 180: (1-2) 65-78  Dunning, D.J., Ross, Q.E., Waldman, J.R. and Mattson, M.T. 1987. Tag retention by, and tagging mortality of Hudson River striped bass. North American Journal of Fisheries Management 7: 535-538.  Edwards, E. 1979. The Edible Crab and its fishery in British waters. Farnham, Surrey, England: Fishing News Books Ltd.  Ennevor, B.C. 1994. Mass markning coho salmon, Oncorhynchus kisutch, fry with lanthanum and cerium. Fisheries Bulletin 92: 471-473.  Fergusson, A., Taggert, J.B., Prodöhl, P.A, McMeel, O., Thompson, C., Stone, C., McGinnity, P. and Hynes, R.A. 1995. The application of molecular markers to the study and conservation of fish populations, with special reference to Salmo. Journal of Fish Biology, 47 (Suppl. A): 103-126.  Francis, R.I.C.C. 1988. Are growth parameters estimated from tagging and age-length data comparable? Canadian Journal of Fisheries and Aquatic Science, 45: 936-942.  Frederick, J.L. 1997. Post-settlement movement of coral reef fishes and bias in survival estimates. Marine Ecology Press Series 150:65-74.  Galvin, P., McGregor, D., Taggert, J., Sadusky, T. and Cross, T. 1995. Single locus minisatellite DNA analysis as a tool for stock discrimination in salmonid and gadoid species. Fisheries Society of the British Isles Annual Symposium, Plymouth, England 10-13 July1995.