Downloaded 440 times
Uploaded byRohan Choudhary
Tagore Theater case study
This document provides information about the design of a performance venue. It includes details about the main entrance, which is a glass chamber supported by steel beams and covered in wood. The interior structure allows natural light and presents the architect's philosophy of material exposure. Floor plans indicate total seating is 801, with 6 public and 2 private entrances. The stage is 12m x 15m with a 2' height and 90 degree viewing angle from the center. Ceiling design reduces reverberation for performance and provides light, fire resistance and access to building systems. Mechanical, electrical and fire protection systems are also outlined.
More Related Content
Similar to Tagore Theater case study
Tagore Theater case study
- 2.
- 3.
- 4.
- 5.
- 6.
- 7.
- 8. South West Winter WindDirection
- 9. North East Summer WindDirection
- 10.
- 11.
- 12.
- 13.
- 14.
- 15. MAIN ENTRANCE MAIN ENTRANCEIS A GLASS CHAMBER SUPPORTED WITH STEEL BEAMS COVERED WITH WOODEN PLATES AND COLUMNS, IT HAS TWO MAIN ENTRANCES WITH 7’10” HEIGHT AND 6’2” WIDE THE AREA OF THE GLASS CHAMBER IS 900 SQ FT. APPROX, THE CHMABER IS ON BOTH SIDES OF THE AUDITORIUM BUT THE CHMABER TOWARDS THE MAIN ENTRANCE IS FUNCTIONAL. INTERIORS
- 16. THE STRUCTURE OFTHE CHAMBER IS FABRICATION. THE STRUCTURE ALLOWS THE NATURAL LIGHTNING AND GIVES NATURALNESS AND PRESENTS CORBUSIER’S PHILOSPHY OF MATERIAL EXPOSURE.
- 18.
- 20. Total seatingarea 801. No. of public entrances 6. Private entrances 2.
- 22.
- 23. • Stage hasan area of 12mx15m. • The height of the stage is 2’. • The angle of view from center of stage is 90 degrees. • Wooden flooring is used. • Distance between stage and front row is 3’.
- 24. The ceiling usedfor reducing reverberation time, it provides important performance attributes such as light reflectants, fire resistance and easy accessibility to building systems.
- 26. CHILLER A chiller isa machine that removes heat from a liquid via a vapor compression or absorption refrigeration cycle. This liquid can then be circulated through a heat exchanger to cool air or equipment as required. AC PLANT
- 27. FIRE PUMP HOUSE Firepump is a part of a fire system which stores water in case of emergency and pumps it through fire fighting units. AC DUCT CENTRAL HEATING SYSTEM A central heating system provides warmth to the whole interior of a building (or portion of a building) from one point to multiple rooms. When combined with other systems in order to control the building climate, the whole system may be an HVAC
- 28. SUBSTATION GENERATOR Electric generator, adevice that converts mechanical energy to electrical energy
- 29. FIRE EXTINGUISHER A fireextinguisher, or extinguisher, is an active fire protection device used to extinguish or control small fires FIRE HOSE CABINATS A fire hose is a high-pressure hose that carries water or other fire retardant (such as foam) to a fire to extinguish it. Outdoors, it attaches either to a fire engine or a fire hydrant. Indoors, it can permanently attach to a building's standpipe or plumbing system. FIRE SPRINKLER A fire sprinkler or sprinkler head is the component of a fire sprinkler system that discharges water when the effects of a fire have been detected, such as when a predetermined temperature has been exceeded. SMOKE DETECTOR A smoke detector is a device that senses smoke, typically as an indicator of fire.
- 30.