Victoria King Resume

Victoria King Resume

• 1.
  Victoria King 303-803-4152 [email protected] www.linkedin.com/in/vmking Education: Colorado Schoolof Mines, Golden CO  Major: Petroleum Engineering (Graduation Date: December 2004) University of Leoben, Leoben Austria  Study abroad program for petroleum engineering students. (Spring 2003) Work Experience: WPX October 2012 to June 2015 Completions Engineering Team Lead Responsibilities Include:  Managed three engineers and two engineering techs for a five rig program that was planned to increase to eight. Rig count has dropped from 5 to 1 during Q1 of 2015 and completions are currently deferred. o Well performance (one year cum production) is number 2 in the basin.  Lead the completion group in optimizing completions. Worked closely with geology and reservoir to incorporate reservoir quality and well spacing. o Performed multivariate, microsiesmic and tracer analysis and integrated frac modeling. o Details are in publications mentioned below.  Oversaw technical aspects of operations and procedures for stimulations.  Wrote and implementing standard operating procedures and guidelines for stimulation and flowback.  Implemented post frac and D&C review  Created field rotation/questions related to frac, perforating, and flowback for new or young engineers Williams/WPX March 2011 to October 2012 Completions Engineer- Williston Basin Operational Responsibilities Include:  Only completion engineer for four rig program.  Design completion procedures for horizontal Bakken wells in the Williston Basin. o Communicate daily with field consultants. o Respond and address issues that arise during planning or execution of completions.  Stuck plugs, screenouts, issues with drill outs  Created customized completion and production reports in Open Wells.  Designed an automated quality check using Open Wells database and spotfire.  Designed interactive AFE template. Williams May 2008 to March 2011 Completions Engineer-Piceance Basin Operational Responsibilities Include:  Design completion procedures for Ryan Gulch, South Grand Valley, Grand Valley, and Parachute fields. o Interpret and analyze open and cased hole logs. o Communicate daily with field consultants. o Address issues that arise during planning or execution of completions. o Perform quality control on daily and stimulation reports.  Monitor new well performance and remediate any concerns, such as braden head pressure or low initial production.
• 2.
   Monitor completionAFE for field estimates versus actual costs.  Evaluated various completion job sizes in the Piceance Basin. Used various softwares available to understand well performance including Spotfire, RPI (reciprocal productivity index), microseismic data, GOHFER and Petra. The results lead to adjusting bottomhole locations and adjusting job sizes. Additional work is being done to optimize job size and well spacing in a field that is not yet in development mode.  Reviewed and analyzed microseismic data for all of William’s Piceance Basin projects. Documented observations and conclusions of different job designs and microseismic results. Iused learning of past jobs to better define objectives and deliverables for latest microseismic project in Ryan Gulch. Designed completion procedures and planned field operations to optimism data collection and expense.  Implemented a sweep pump schedule as a result of studying the pressure events in the Rulison Field. The modified pump schedule has shown promising results in minimizing pressure events, but after additional analysis the total job size and proppant concentration has show to have a greater effect on minimizing pressure events.  Participated on a technology team to study well interference and refine Williams’ drainage radius. The team strategically picked 5 wells in South Grand Valley to shut in and look for interference. RPI was incorporated into analysis. Results helped to confirm drainage ellipse dimensions  Wrote guidelines for using gas assist fracturing and implemented with completions team.  Wrote guidelines for DFIT (diagnostic fracture injection test) and implemented with completion team. Procedure encompassed well preparation prior to DFIT, DFIT fluids/rates, reporting standard for service company, internal reporting and quality control. Energy Corporation of America Jan 2005 – May 2008 Drilling Engineer—Appalachian Basin January 2006 to May 2008 Worked in the Appalachian Basin specifically in Southern West Virginia, Eastern Kentucky, and Southern Pennsylvania in the development-drilling program. (vertical well program) Responsibilities include:  Prepared well stimulation design, performed on site supervision of fracs, and created reports. o Average 1 well per week design and frac using crosslinked fracing, high quality foam fracing and acid fracing  Prepare AFE for development drilling, including reserves and economic evaluation.  Worked on well planning and procedures including drilling rigs, drillstring design, casing and cementing design and operations.  Drill site supervision and reporting.  Open hole logging interpretation and analysis, open to cased hole log correlation.  Perforating design and operations. Petroleum Engineer January 2005 to January 2006  Worked closely with the Development Drilling Team to evaluate reserves and economics for new well AFE’s by utilizing OGRE, Arcview, internal databases and state agencies.  Conducted pipeline pressure study in Southern West Virginia to optimize the design of a new 8” steel pipeline in Southern West Virginia.  Submitted the Well Work Permit Application to the state of West Virginia.  Analyzed the effects of well spacing by analyzing producing formations, production, and pressure changes in the Appalachian Basin. Evergreen Resources May 2004 – Oct 2004 Intern May 2004 to October 2004  Worked on defining trends in the Raton Basin by geologic location and producing formation.
• 3.
   Set upand managed OFM database for a section of the Uintah Basin. Computing Skills: Petra, Open Wells, RPI, GOHFER, OGRE, Oil Field Manager, Arcview, Excel, Access, Spotfire, Transform Professional Memberships: Society of Petroleum Engineers (2002-current) Publications: King, V.M., and Wray, L., Completion Optimization Utilizing Multivariate Analysis in the Bakken and Three Forks Formations (SPE 169534) Barhaug, J., King, V.M., Harper, H., Schmidt, A., Southcott, A., and Steinke, L., Completion Optimization and Validation in the Williston Basin through Integrated Datasets (SPE 170721-MS) Barhaug, J., King, V.M., Harper, H., Schmidt, A., Southcott, A., and Steinke, L. 2014. Project Optimizes Completion Design. The American Oil & Gas Reporter, December: 94-105 Barhaug, J., King, V.M., Harper, H., Schmidt, A., Southcott, A., and Steinke, L. 2015. Field Test Validates Completion Design. The American Oil & Gas Reporter, January: 92-99