Download to read offline
More Related Content
Similar to Work Area Specific HAZCOM Training, Avionics
Work Area Specific HAZCOM Training, Avionics
- 1.
- 2. • Upon completionof the highlighted areas, the Shop Supervisor or HAZCOM Program Manager must send the completed slides to BE for review and approval. • Provided that all shop specific information has been properly and accurately completed and you receive final approval from BE, PH, Safety, and Fire, this template will fulfill the requirements of HAZCOM. • It is the Shop Supervisor or HAZCOM Program Manager’s responsibility to review this program at least annually to ensure all processes, chemicals, and controls are precisely captured within this training. 2 WORK AREA-SPECIFIC TRAINING APPROVAL
- 3. • Avionics HAZCOMProgram POC SMSgt Jeffrey Stevenson • Location of Safety Data Sheet (SDS): • Hard Copies: In the tool room, next to the HAZMAT cabinet • Location of HAZCOM Program on Network Drive: S:MDGPublicOccupational HealthFlightline - Avionics3. HAZCOM 3 WORK AREA-SPECIFIC HAZCOM TRAINING
- 4. THE RIGHT TOUNDERSTAND “……to ensure that the hazards of all chemicals produced or imported are evaluated, and that information concerning their hazards is transmitted to employers and employees.” 4 WORK AREA-SPECIFIC PURPOSE OF HAZCOM STANDARD
- 5. Employees are responsiblefor: • Planning and conducting each task according to the HAZCOM program. • Using the required PPE. • Properly maintaining and storing the assigned PPE. • Knowing the location(s) in their work area where SDSs are maintained. • Not removing or defacing labels on incoming chemical containers. • Attending required HAZCOM training. • Providing supervisor with records or any training taken online. 5 WORK AREA-SPECIFIC EMPLOYEE RESPONSIBILITIES
- 6. NOTE: Supervisors mayuse the Process to Material Authorization in EESOH-MIS and BE Certified PPE and Health Risk Controls as sources of information to meet this training requirement. 6 WORK AREA-SPECIFIC IDENTIFICATION OF PROCESSES
- 7. • Listing oftasks performed within a workplace’s normal activities but performed infrequently • Snow removal • Vehicle cleaning • Self-Help Projects (use of power tools) • Cleaning floors (stripping, waxing – use of detergents) • Temporary duties outside of the individual’s normal AFSC or job series • Governing documents (T.O., O.I., manufacturer instructions) must thoroughly describe the non-routine task and it’s associated hazards and controls • Workplace supervisor must prepare document if other governing documents do not exist • Supervisors will ensure workers review these procedures before performing the task 7 WORK AREA-SPECIFIC NON-ROUTINE TASKS
- 8. How will youknow if a chemical is HAZARDOUS? Under the revised Hazard Communication Standard (HCS), any chemical that presents a physical hazard or a health hazard is considered a hazardous chemical. 8 WORK AREA-SPECIFIC HAZARDS
- 9. The HCS definitionsfor physical and health hazards are: • Physical hazard means a chemical for which there is scientifically valid evidence that it is a combustible liquid, a compressed gas, explosive, flammable, an organic peroxide, an oxidizer, pyrophoric, unstable (reactive) or water-reactive. • Health hazard means a chemical for which there is statistically significant evidence based on at least one study conducted in accordance with established scientific principles that acute or chronic health effects may occur in exposed employees. The term "health hazard" includes chemicals which are carcinogens, toxic or highly toxic agents, reproductive toxins, irritants, corrosives, sensitizers, hepatotoxins, nephrotoxins, neurotoxins, agents which act on the hematopoietic system, and agents which damage the lungs, skin, eyes, or mucous membranes. 9 WORK AREA-SPECIFIC HAZARD DEFINITIONS
- 10. NOTE: Supervisors mayuse the Process to Material Authorization in EESOH-MIS and BE Certified PPE and Health Risk Controls as sources of information to meet this training requirement. 10 WORK AREA-SPECIFIC IDENTIFICATION OF CHEMICALS
- 11. 11 WORK AREA-SPECIFIC HAZARD INFORMATION WHERECAN YOU FIND THIS INFO? YOU CAN START BY REVIEWING THE PRODUCT LABEL & SAFETY DATA SHEET (SDS)*!
- 12. WORK AREA-SPECIFIC OSHA COMPLIANTSAMPLE LABEL As of June 1, 2015, all labels will be required to have pictograms, a signal word, hazard and precautionary statements, the product identifier, and supplier identification.
- 13. NEW labels willrequire the following elements: Pictogram: a symbol plus other graphic elements. There are nine pictograms under the GHS. Signal words: a single word used to indicate the relative level of severity of hazard . The signal words used are “Danger" and “Warning”. Hazard Statement: a statement assigned to describe the nature of the hazard(s) of a chemical. Precautionary Statement: a phrase that describes measures to be taken to minimize or prevent adverse effects Product Identifier (ingredient disclosure): Name or number used for a hazardous product on a label or in the SDS. Supplier identification: The name, address and telephone number should be provided on the label. 13 WORK AREA-SPECIFIC NEW LABELING REQUIREMENTS
- 14. • There are9 pictograms. • Health Hazards. • Physical Hazards. • Environmental Hazards. • Each pictogram consists of a symbol on a white background framed within a red border and represents a distinct hazard(s). WORK AREA-SPECIFIC PICTOGRAMS & HAZARDS
- 15. 15 • Irritant (skinand eye) • Skin Sensitizer • Acute Toxicity (harmful) • Narcotic Effects • Respiratory Tract Irritant • Hazardous to Ozone Layer (Non-Mandatory) WORK AREA-SPECIFIC EXPLANATION POINT
- 16. 16 • Carcinogen • Mutagenicity •Reproductive Toxicity • Respiratory Sensitizer • Target Organ Toxicity • Aspiration Toxicity WORK AREA-SPECIFIC HEALTH HAZARD
- 17. 17 • Flammables • Pyrophorics •Self-Heating • Emits Flammable Gas • Self-Reactives • Organic Peroxides WORK AREA-SPECIFIC FLAME
- 18. 18 • Gases underPressure WORK AREA-SPECIFIC GAS CYLINDER
- 19. 19 • Skin Corrosion/burns • Eye Damage • Corrosive to Metals WORK AREA-SPECIFIC CORROSION
- 20. 20 • Explosives • Self-Reactives •Organic Peroxides WORK AREA-SPECIFIC EXPLODING BOMB
- 21. 21 • Oxidizers WORK AREA-SPECIFIC FLAMEOVER CIRCLE
- 22. 22 •Acute Toxicity (fatalor toxic) WORK AREA-SPECIFIC SKULL AND CROSSBONES
- 23.
- 24. 24 Can you recognizethe hazard associated with each Pictogram? LABELING PICTOGRAMS & HAZARDS
- 25. UNCLASSIFIED/FOUO 25 LABELING SIGNAL WORDS A singleword used to indicate the severity of the hazard and alert employees to a potential hazard on the label. This final rule requires the use of one of two signal words for labeling: “DANGER” (more severe hazard). “WARNING” (less severe hazard).
- 26. There are specifichazard statements that must appear on the label based on the chemical hazard classification. Examples: • Highly Flammable liquid. • Causes mild skin irritation. • Causes serious eye irritation. LABELING HAZARD STATEMENT
- 27. • Recommended measuresthat should be taken to protect against hazardous exposures: • Prevention • Response • Storage • Disposal • Examples: • Keep away from heat/sparks/open flame. • No smoking. • Avoid breathing fumes/vapors. • ANSI Standard Z129.1, Hazardous Industrial Chemicals – Precautionary Labeling (Document ID #0610), was developed to provide a consistent approach to labeling of hazardous chemicals. LABELING PRECAUTIONARY STATEMENT
- 28. • Some operationsmay require transferring chemicals from the original labeled container into a secondary container. • Secondary labels must comply with primary label requirements if any of the following events occur: • The material is not used within the work shift of the individual who makes the transfer. • The worker who made the transfer leaves the work area. • The container is moved to another work area and is no longer in the possession of the worker who filled the container. • Secondary containers that will be used immediately by the employee and the contents used completely, will not require an OSHA compliant label. LABELING SECONDARY LABEL REQUIREMENTS
- 29. DOT Shipping Flammable liquids, toxic,n.o.s. (contains XYZ) UN 1992 Shipping Container Label (55 gallon/200 liter drum) Pictograms within DOT label LABELING SHIPPING SAMPLE LABEL
- 30. • Provides detailedinformation about potential hazards associated with materials used or stored in your work area. • Advises on the: • Appropriate way to handle the chemical. • What PPE is required for handling the chemical. • How to properly store the chemical. • Information on handling spill cleanup, etc. 30 WORK AREA-SPECIFIC SAFETY DATA SHEET (SDS)
- 31. Common terms foundin the SDS: • Exposure limits: Dose limits that set thresholds. Designed to protect you against adverse health effects. (PEL, TLV, OEEL) • Routes of Entry: • Inhalation (breathing in) • Absorption (contact with skin) • Ingestion (swallowing) • Acute Effects: Happens suddenly, normally from a single exposure. • Chronic Effects: Result of repeated exposures, over long periods of time, or when the body takes a long time to develop a response after a brief exposure. 31 WORK AREA-SPECIFIC SAFETY DATA SHEET (SDS)
- 32. Common terms continued: •Toxic: Poisonous • Highly Toxic: Poisonous – smaller does causes greater effect. • Carcinogens: Cancer causing, or potentially cancer causing chemicals. • Corrosives: Destroy or damage living tissue. Effect is irreversible. • Irritant: Less destructive than corrosives. Effect is reversible. • Sensitizers: May cause allergic reactions after repeated exposures. • Protective Measures: • Engineering Controls • Work Practices (Admin Controls) • PPE • Flammable: Easily ignited and burn rapidly. • Combustible: Capable of fueling a fire, but do not ignite and burn as readily as a flammable. 32 WORK AREA-SPECIFIC SAFETY DATA SHEET (SDS)
- 33. • Per therevised OSHA HAZCOM standard, as of June 1, 2015, SDS must have a standardized format organized into the following 16 sections: • Section 1, Identification includes product identifier; manufacturer or distributor name, address, phone number; emergency phone number; recommended use; restrictions on use. • Section 2, Hazard(s) identification includes all hazards regarding the chemical; required label elements. • Section 3, Composition/information on ingredients includes information on chemical ingredients; trade secret claims. • Section 4, First-aid measures includes important symptoms/ effects, acute, delayed; required treatment. 33 WORK AREA-SPECIFIC SAFETY DATA SHEET (SDS)
- 34. • Section 5,Fire-fighting measures lists suitable extinguishing techniques, equipment; chemical hazards from fire. • Section 6, Accidental release measures lists emergency procedures; protective equipment; proper methods of containment and cleanup. • Section 7, Handling and storage lists precautions for safe handling and storage, including incompatibilities. • Section 8, Exposure controls/personal protection lists OSHA's Permissible Exposure Limits (PELs); Threshold Limit Values (TLVs); appropriate engineering controls; personal protective equipment (PPE). • Section 9, Physical and chemical properties lists the chemical's characteristics. • Section 10, Stability and reactivity lists chemical stability and possibility of hazardous reactions. 34 WORK AREA-SPECIFIC SAFETY DATA SHEET (SDS)
- 35. • Section 11,Toxicological information includes routes of exposure; related symptoms, acute and chronic effects; numerical measures of toxicity. • Section 12, Ecological information* • Section 13, Disposal considerations* • Section 14, Transport information* • Section 15, Regulatory information* • Section 16, Other information includes the date of preparation or last revision. *Note: Since other Agencies regulate this information, OSHA will not be enforcing Sections 12 through 15 (29 CFR 1910.1200(g)(2)). 35 WORK AREA-SPECIFIC SAFETY DATA SHEET (SDS)
- 36. 36 WORK AREA-SPECIFIC SAFETY DATASHEET (SDS)
- 37. 37 WORK AREA-SPECIFIC SAFETY DATASHEET (SDS) Where are they located in your work area? Hard Copies: In the tool room, next to the HAZMAT cabinet
- 38. 38 WORK AREA-SPECIFIC CONTROLS What controlmethods should you use to minimize or eliminate exposure to hazardous chemicals while performing your work? What methods and observations have been used to detect the presence or release of a hazardous chemical in the work area?
- 39. • If youexperience acute signs and symptoms, stop your work activity and notify your supervisor immediately. – see SDS for first aid procedures • Seek medical attention as needed. • If your skin or eyes come into contact with chemicals, rinse off immediately. • Eye wash stations are located: In the main hangar and the washrack • For spills refer to the local spill plan: Contact Environmental Management 761-6303 • Emergency Escape Procedures: Work Center Safety Binder Tab 2 & on the Safety Board 39 WORK AREA-SPECIFIC EMERGENCY PROCEDURES
- 40. • If youwork with any chemical listed as an OSHA Expanded Standard Substance, additional training is required for each chemical per 29 CFR 1910.1001-1052. • Avionics does not have any Expanded Standard Substance training requirements. 40 WORK AREA-SPECIFIC OSHA EXPANDED STANDARD TRAINING
- 41. • SMSgt JeffreyStevenson • Building: 272 • DSN: 455-6154 • Public Health – Occupational Health Element • Resource for HAZCOM Training • Building 400 • DSN 455-6333 • Bioenvironmental Engineering • Provides HAZCOM Program Approval and Guidance • Building 400 • DSN 455-6244 • Wing Ground Safety • Resource for Safety / PPE Guidance • Building 408 • DSN 455-6013 41 WORK AREA-SPECIFIC HAZCOM KEY PLAYERS
- 42. • USAFSAM ESOHService Center: https://hpws.afrl.af.mil/dhp/OE/ESOHSC/ • OSHA web page on Hazard Communication: http://www.osha.gov/dsg/hazcom/index.html • OSHA FACT SHEET : http://www.osha.gov/dsg/hazcom/HCSFactsheet.html • OSHA’s Guide to the GHS Purple Book: http://www.osha.gov/dsg/hazcom/ghs.html • Globally Harmonized System Of Classification And Labeling of Chemicals (GHS), 4th ed (Purple Book) http://www.unece.org/trans/danger/publi/ghs/ghs_rev04/04files_e.html 42 WORK AREA-SPECIFIC HAZCOM RESOURCES
- 43. POSSIBLE HAZCOM INSPECTORQUESTIONS • All workplace personnel have to demonstrate: • If given a chemical container, can I quickly find the SDS and emergency procedures in the event of a spill? • Involves reading the chemical label, finding the SDS, and understanding the SDS • What PPE am I required to wear when performing a workplace process? • Found in BE survey letter, SDS, HAZCOM Binder, or JSTO • Who is my workplace HAZCOM Manager? • What do I do before I start a process involving hazardous chemicals? • Review process procedures, checklists, T.O.s, O.I.s, etc… • Identify engineering, administrative, and PPE controls • Identify emergency procedures, eyewashes/showers as applicable • What are the signs and symptoms of overexposure? • Involves reading the chemical label, finding the SDS, and understanding the SDS 43
- 44. ToxiFlam (Contains: XYZ) Danger!Toxic If Swallowed, Flammable Liquid and Vapor Do not eat, drink or use tobacco when using this product. Wash hands thoroughly after handling. Keep container tightly closed. Keep away from heat/sparks/open flame. - No smoking. Wear protective gloves and eye/face protection. Ground container and receiving equipment. Use explosion-proof electrical equipment. Take precautionary measures against static discharge. Use only non-sparking tools. Store in cool/well-ventilated place. IF SWALLOWED: Immediately call a POISON CONTROL CENTER or doctor/physician. Rinse mouth. In case of fire, use water fog, dry chemical, CO2, or "alcohol" foam. See Safety Data Sheet for further details regarding safe use of this product. MyCompany, MyStreet, MyTown NJ 00000, Tel: 444 966 6666 Signal Word Hazard Statements Precautionary Statements Product Identifier Supplier Identification Supplemental Information Pictograms (Flammable and Acute Toxicity – Severe) 44 CAN YOU IDENTIFY EACH REQUIRED SECTION/ELEMENT OF THE NEW LABEL?