x-geo-Minerals and Energy Resources.pptx

x-geo-Minerals and Energy Resources.pptx

• 1.
  MINERALS AND ENERGY RESOURCES
• 2.
  • What isa mineral? • Mode of occurrence of minerals • Distribution of Minerals in India • What is mining? • Who owns minerals? • What is Rat-Hole mining? • Classification of Minerals • Ferrous Minerals • Iron Ore • Iron ore producing areas in India • Production of iron ore showing state wise share • Manganese • Production of Manganese showing state wise share
• 3.
  WHAT IS AMINERAL? • A homogeneous, naturally occurring substance with a definable internal structure is called mineral. • Minerals are found in varied forms in nature, ranging from the hardest diamond to the softest talc. • Why are they so varied? • It is because the formation of minerals depend upon physical and chemical conditions that results in a wide range of colors, hardness, crystal forms, lustre and density of a mineral.
• 6.
  MODE OF OCCURRENCEOF MINERALS • Minerals are usually found in ‘ores’ • What is an ore? An ore is an accumulation of any mineral mixed with other elements. The mineral content of the ore must be in sufficient concentration to make its extraction commercially viable. • Minerals generally occur in the following forms: o Veins and lodes: In igneous and metamorphic rocks minerals may occur in the cracks, crevices, faults or joints. The smaller occurrences are called veins and the larger are called lodes. Examples are minerals like tin, copper, zinc, lead etc. o Beds or layers: In sedimentary rocks a number of minerals occur in beds or layers. They have been formed as a result of deposition, accumulation and concentration in horizontal layers of the rock. Coal, some forms of iron ore, gypsum, potash , sodium salts etc. o Decomposition of surface rocks: When the decomposition of surface rocks occurs with the removal of soluble constituents, it leaves a residual mass of weathered material containing mineral ores. Bauxite is formed in this way. o Alluvial deposits/ placer deposits : Some minerals are found in sands of valley floors and the base of hills. These deposits are also called as ‘placer deposits’. They are not corroded by water. Examples are: gold, silver, tin and platinum. o Ocean waters: The ocean waters contain vast quantities of minerals, but most of these are spread over a wide area. Therefore they are economically not viable. However, common salt, magnesium and bromine are largely derived from ocean waters. The ocean beds, too, are rich in manganese nodules.
• 7.
  DISTRIBUTION OF MINERALSIN INDIA • India is fortunate to have fairly rich and varied mineral resources. However, these are unevenly distributed. • Peninsular Plateau: Peninsular rocks contain most of the reserves of coal, metallic minerals, mica and many other non- metallic minerals. • Gujarat and Assam: Sedimentary rocks on the western and eastern flanks of the peninsula, in Gujarat and Assam have most of the petroleum deposits. • Rajasthan: It has reserves of many non-ferrous minerals. • Northern Plains: The vast alluvial plains of north India are almost devoid of economic minerals. • These variations exist largely because of the differences in the geological structure, processes and time involved in the formation of minerals.
• 9.
  WHAT IS MINING? •The economic activity of extraction of minerals from below the earth’s surface is called mining. • the concentration of mineral in the ore, the ease of extraction and closeness to the market play an important role in affecting the economic viability of a reserve. Thus, to meet the demand, a choice has to be made between a number of possible options. When this is done a mineral ‘deposit’ or ‘reserve’ turns into a mine.
• 10.
  WHO OWNS MINERALS? WHATIS RAT-HOLE MINING? • Most of the minerals in India are nationalised and their extraction is possible only after obtaining due permission from the government. • But in most of the tribal areas of the north-east India, minerals are owned by individuals or communities. • Meghalaya, is rich in the deposits of coal, iron ore, limestone and dolomite etc. • Coal mining in Jowai and Cherapunjee is done by family member in the form of a long narrow tunnel, this is known as ‘Rat hole’ mining.
• 11.
  CLASSIFICATION OF MINERALS
• 12.
  FERROUS MINERALS • Metallicminerals having iron content are called Ferrous Minerals. • These minerals account for about three fourths of the total value of the production of metallic minerals. • They are the strong base for the development of metallurgical industries.
• 13.
  IRON ORE • Ironore is the basic mineral and it is the backbone of industrial development. • India is rich in good quality iron ores. • Magnetite: • Magnetite is the finest iron ore with a very high content of iron up to 70%. • It has excellent magnetic qualities. • It is valuable in the electrical industry. • Hematite: • It is the most important industrial iron ore in terms of the quantity used. • But it has a slightly lower iron content than magnetite. (50-60 per cent). • Iron ore producing areas in India: • Odisha-Jharkhand Belt: • High grade hematite ore is found in Badampahar mines of Mayurbhanj and Kendujhar districts of Odisha and Gua and Noamundi mines of Singbhum district of Jharkhand.
• 14.
  • 2. Durg-Bastar-ChandrapurBelt: • It lies in Chhattisgarh and Maharashtra. • The Bailadila hills of the Bastar district of Chhattisgarh look like the hump of an ox, and hence its name. • Super high grade hematite iron ore is found in the Bailadila range of hills . • It has the best physical properties needed for steel making. • Iron ore from these mines is exported to Japan and South Korea via Vishakhapatnam port. • 3. Ballari-Chitradurga-Chikkamagaluru-Tumakuru Belt: • This belt in Karnataka has large reserves of iron ore. • Kudre in Kannada means horse. • The highest peak in the western ghats of Karnataka resembles the face of a horse. • The Kudremukh mines located in the Western Ghats of Karnataka are a 100 per cent export unit. • The iron ore from Kudremukh is transported as slurry through a pipeline to a port near Mangaluru. • 4. Maharashtra-Goa Belt: • It includes the state of Goa and Ratnagiri district of Maharashtra. • The ores from these area are not of very high quality. • Still they are very efficiently extracted.
• 15.
  MANGANESE • Manganese ismainly used in the manufacturing of steel and ferro- manganese alloy. • For manufacturing one tonne of steel nearly 10 kg of manganese is required. • It is also used in manufacturing bleaching powder, insecticides and paints. • Production of Manganese showing state wise share in per cent, 2009-2010
• 16.
  Distribution of iron oreand manganese