pub struct DescribeInstanceCreditSpecificationsFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to DescribeInstanceCreditSpecifications.
Describes the credit option for CPU usage of the specified burstable performance instances. The credit options are standard and unlimited.
If you do not specify an instance ID, Amazon EC2 returns burstable performance instances with the unlimited credit option, as well as instances that were previously configured as T2, T3, and T3a with the unlimited credit option. For example, if you resize a T2 instance, while it is configured as unlimited, to an M4 instance, Amazon EC2 returns the M4 instance.
If you specify one or more instance IDs, Amazon EC2 returns the credit option (standard or unlimited) of those instances. If you specify an instance ID that is not valid, such as an instance that is not a burstable performance instance, an error is returned.
Recently terminated instances might appear in the returned results. This interval is usually less than one hour.
If an Availability Zone is experiencing a service disruption and you specify instance IDs in the affected zone, or do not specify any instance IDs at all, the call fails. If you specify only instance IDs in an unaffected zone, the call works normally.
For more information, see Burstable performance instances in the Amazon EC2 User Guide.
Implementations§
Source§impl DescribeInstanceCreditSpecificationsFluentBuilder
impl DescribeInstanceCreditSpecificationsFluentBuilder
Sourcepub fn as_input(&self) -> &DescribeInstanceCreditSpecificationsInputBuilder
pub fn as_input(&self) -> &DescribeInstanceCreditSpecificationsInputBuilder
Access the DescribeInstanceCreditSpecifications as a reference.
Sourcepub async fn send(
self,
) -> Result<DescribeInstanceCreditSpecificationsOutput, SdkError<DescribeInstanceCreditSpecificationsError, HttpResponse>>
pub async fn send( self, ) -> Result<DescribeInstanceCreditSpecificationsOutput, SdkError<DescribeInstanceCreditSpecificationsError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<DescribeInstanceCreditSpecificationsOutput, DescribeInstanceCreditSpecificationsError, Self>
pub fn customize( self, ) -> CustomizableOperation<DescribeInstanceCreditSpecificationsOutput, DescribeInstanceCreditSpecificationsError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn into_paginator(self) -> DescribeInstanceCreditSpecificationsPaginator
pub fn into_paginator(self) -> DescribeInstanceCreditSpecificationsPaginator
Create a paginator for this request
Paginators are used by calling send().await which returns a PaginationStream.
Sourcepub fn dry_run(self, input: bool) -> Self
pub fn dry_run(self, input: bool) -> Self
Checks whether you have the required permissions for the operation, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Sourcepub fn set_dry_run(self, input: Option<bool>) -> Self
pub fn set_dry_run(self, input: Option<bool>) -> Self
Checks whether you have the required permissions for the operation, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Sourcepub fn get_dry_run(&self) -> &Option<bool>
pub fn get_dry_run(&self) -> &Option<bool>
Checks whether you have the required permissions for the operation, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Sourcepub fn filters(self, input: Filter) -> Self
pub fn filters(self, input: Filter) -> Self
Appends an item to Filters.
To override the contents of this collection use set_filters.
The filters.
-
instance-id- The ID of the instance.
Sourcepub fn set_filters(self, input: Option<Vec<Filter>>) -> Self
pub fn set_filters(self, input: Option<Vec<Filter>>) -> Self
The filters.
-
instance-id- The ID of the instance.
Sourcepub fn get_filters(&self) -> &Option<Vec<Filter>>
pub fn get_filters(&self) -> &Option<Vec<Filter>>
The filters.
-
instance-id- The ID of the instance.
Sourcepub fn instance_ids(self, input: impl Into<String>) -> Self
pub fn instance_ids(self, input: impl Into<String>) -> Self
Appends an item to InstanceIds.
To override the contents of this collection use set_instance_ids.
The instance IDs.
Default: Describes all your instances.
Constraints: Maximum 1000 explicitly specified instance IDs.
Sourcepub fn set_instance_ids(self, input: Option<Vec<String>>) -> Self
pub fn set_instance_ids(self, input: Option<Vec<String>>) -> Self
The instance IDs.
Default: Describes all your instances.
Constraints: Maximum 1000 explicitly specified instance IDs.
Sourcepub fn get_instance_ids(&self) -> &Option<Vec<String>>
pub fn get_instance_ids(&self) -> &Option<Vec<String>>
The instance IDs.
Default: Describes all your instances.
Constraints: Maximum 1000 explicitly specified instance IDs.
Sourcepub fn max_results(self, input: i32) -> Self
pub fn max_results(self, input: i32) -> Self
The maximum number of items to return for this request. To get the next page of items, make another request with the token returned in the output. For more information, see Pagination.
You cannot specify this parameter and the instance IDs parameter in the same call.
Sourcepub fn set_max_results(self, input: Option<i32>) -> Self
pub fn set_max_results(self, input: Option<i32>) -> Self
The maximum number of items to return for this request. To get the next page of items, make another request with the token returned in the output. For more information, see Pagination.
You cannot specify this parameter and the instance IDs parameter in the same call.
Sourcepub fn get_max_results(&self) -> &Option<i32>
pub fn get_max_results(&self) -> &Option<i32>
The maximum number of items to return for this request. To get the next page of items, make another request with the token returned in the output. For more information, see Pagination.
You cannot specify this parameter and the instance IDs parameter in the same call.
Sourcepub fn next_token(self, input: impl Into<String>) -> Self
pub fn next_token(self, input: impl Into<String>) -> Self
The token returned from a previous paginated request. Pagination continues from the end of the items returned by the previous request.
Sourcepub fn set_next_token(self, input: Option<String>) -> Self
pub fn set_next_token(self, input: Option<String>) -> Self
The token returned from a previous paginated request. Pagination continues from the end of the items returned by the previous request.
Sourcepub fn get_next_token(&self) -> &Option<String>
pub fn get_next_token(&self) -> &Option<String>
The token returned from a previous paginated request. Pagination continues from the end of the items returned by the previous request.
Trait Implementations§
Source§impl Clone for DescribeInstanceCreditSpecificationsFluentBuilder
impl Clone for DescribeInstanceCreditSpecificationsFluentBuilder
Source§fn clone(&self) -> DescribeInstanceCreditSpecificationsFluentBuilder
fn clone(&self) -> DescribeInstanceCreditSpecificationsFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for DescribeInstanceCreditSpecificationsFluentBuilder
impl !RefUnwindSafe for DescribeInstanceCreditSpecificationsFluentBuilder
impl Send for DescribeInstanceCreditSpecificationsFluentBuilder
impl Sync for DescribeInstanceCreditSpecificationsFluentBuilder
impl Unpin for DescribeInstanceCreditSpecificationsFluentBuilder
impl !UnwindSafe for DescribeInstanceCreditSpecificationsFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);