pub struct UpdateDomainConfigurationFluentBuilder { /* private fields */ }
Expand description
Fluent builder constructing a request to UpdateDomainConfiguration
.
Updates values stored in the domain configuration. Domain configurations for default endpoints can't be updated.
Requires permission to access the UpdateDomainConfiguration action.
Implementations§
Source§impl UpdateDomainConfigurationFluentBuilder
impl UpdateDomainConfigurationFluentBuilder
Sourcepub fn as_input(&self) -> &UpdateDomainConfigurationInputBuilder
pub fn as_input(&self) -> &UpdateDomainConfigurationInputBuilder
Access the UpdateDomainConfiguration as a reference.
Sourcepub async fn send(
self,
) -> Result<UpdateDomainConfigurationOutput, SdkError<UpdateDomainConfigurationError, HttpResponse>>
pub async fn send( self, ) -> Result<UpdateDomainConfigurationOutput, SdkError<UpdateDomainConfigurationError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError
will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<UpdateDomainConfigurationOutput, UpdateDomainConfigurationError, Self>
pub fn customize( self, ) -> CustomizableOperation<UpdateDomainConfigurationOutput, UpdateDomainConfigurationError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn domain_configuration_name(self, input: impl Into<String>) -> Self
pub fn domain_configuration_name(self, input: impl Into<String>) -> Self
The name of the domain configuration to be updated.
Sourcepub fn set_domain_configuration_name(self, input: Option<String>) -> Self
pub fn set_domain_configuration_name(self, input: Option<String>) -> Self
The name of the domain configuration to be updated.
Sourcepub fn get_domain_configuration_name(&self) -> &Option<String>
pub fn get_domain_configuration_name(&self) -> &Option<String>
The name of the domain configuration to be updated.
An object that specifies the authorization service for a domain.
An object that specifies the authorization service for a domain.
An object that specifies the authorization service for a domain.
Sourcepub fn domain_configuration_status(
self,
input: DomainConfigurationStatus,
) -> Self
pub fn domain_configuration_status( self, input: DomainConfigurationStatus, ) -> Self
The status to which the domain configuration should be updated.
Sourcepub fn set_domain_configuration_status(
self,
input: Option<DomainConfigurationStatus>,
) -> Self
pub fn set_domain_configuration_status( self, input: Option<DomainConfigurationStatus>, ) -> Self
The status to which the domain configuration should be updated.
Sourcepub fn get_domain_configuration_status(
&self,
) -> &Option<DomainConfigurationStatus>
pub fn get_domain_configuration_status( &self, ) -> &Option<DomainConfigurationStatus>
The status to which the domain configuration should be updated.
Removes the authorization configuration from a domain.
Removes the authorization configuration from a domain.
Removes the authorization configuration from a domain.
Sourcepub fn tls_config(self, input: TlsConfig) -> Self
pub fn tls_config(self, input: TlsConfig) -> Self
An object that specifies the TLS configuration for a domain.
Sourcepub fn set_tls_config(self, input: Option<TlsConfig>) -> Self
pub fn set_tls_config(self, input: Option<TlsConfig>) -> Self
An object that specifies the TLS configuration for a domain.
Sourcepub fn get_tls_config(&self) -> &Option<TlsConfig>
pub fn get_tls_config(&self) -> &Option<TlsConfig>
An object that specifies the TLS configuration for a domain.
Sourcepub fn server_certificate_config(self, input: ServerCertificateConfig) -> Self
pub fn server_certificate_config(self, input: ServerCertificateConfig) -> Self
The server certificate configuration.
Sourcepub fn set_server_certificate_config(
self,
input: Option<ServerCertificateConfig>,
) -> Self
pub fn set_server_certificate_config( self, input: Option<ServerCertificateConfig>, ) -> Self
The server certificate configuration.
Sourcepub fn get_server_certificate_config(&self) -> &Option<ServerCertificateConfig>
pub fn get_server_certificate_config(&self) -> &Option<ServerCertificateConfig>
The server certificate configuration.
Sourcepub fn authentication_type(self, input: AuthenticationType) -> Self
pub fn authentication_type(self, input: AuthenticationType) -> Self
An enumerated string that specifies the authentication type.
-
CUSTOM_AUTH_X509
- Use custom authentication and authorization with additional details from the X.509 client certificate.
-
CUSTOM_AUTH
- Use custom authentication and authorization. For more information, see Custom authentication and authorization.
-
AWS_X509
- Use X.509 client certificates without custom authentication and authorization. For more information, see X.509 client certificates.
-
AWS_SIGV4
- Use Amazon Web Services Signature Version 4. For more information, see IAM users, groups, and roles.
-
DEFAULT
- Use a combination of port and Application Layer Protocol Negotiation (ALPN) to specify authentication type. For more information, see Device communication protocols.
Sourcepub fn set_authentication_type(self, input: Option<AuthenticationType>) -> Self
pub fn set_authentication_type(self, input: Option<AuthenticationType>) -> Self
An enumerated string that specifies the authentication type.
-
CUSTOM_AUTH_X509
- Use custom authentication and authorization with additional details from the X.509 client certificate.
-
CUSTOM_AUTH
- Use custom authentication and authorization. For more information, see Custom authentication and authorization.
-
AWS_X509
- Use X.509 client certificates without custom authentication and authorization. For more information, see X.509 client certificates.
-
AWS_SIGV4
- Use Amazon Web Services Signature Version 4. For more information, see IAM users, groups, and roles.
-
DEFAULT
- Use a combination of port and Application Layer Protocol Negotiation (ALPN) to specify authentication type. For more information, see Device communication protocols.
Sourcepub fn get_authentication_type(&self) -> &Option<AuthenticationType>
pub fn get_authentication_type(&self) -> &Option<AuthenticationType>
An enumerated string that specifies the authentication type.
-
CUSTOM_AUTH_X509
- Use custom authentication and authorization with additional details from the X.509 client certificate.
-
CUSTOM_AUTH
- Use custom authentication and authorization. For more information, see Custom authentication and authorization.
-
AWS_X509
- Use X.509 client certificates without custom authentication and authorization. For more information, see X.509 client certificates.
-
AWS_SIGV4
- Use Amazon Web Services Signature Version 4. For more information, see IAM users, groups, and roles.
-
DEFAULT
- Use a combination of port and Application Layer Protocol Negotiation (ALPN) to specify authentication type. For more information, see Device communication protocols.
Sourcepub fn application_protocol(self, input: ApplicationProtocol) -> Self
pub fn application_protocol(self, input: ApplicationProtocol) -> Self
An enumerated string that specifies the application-layer protocol.
-
SECURE_MQTT
- MQTT over TLS.
-
MQTT_WSS
- MQTT over WebSocket.
-
HTTPS
- HTTP over TLS.
-
DEFAULT
- Use a combination of port and Application Layer Protocol Negotiation (ALPN) to specify application_layer protocol. For more information, see Device communication protocols.
Sourcepub fn set_application_protocol(
self,
input: Option<ApplicationProtocol>,
) -> Self
pub fn set_application_protocol( self, input: Option<ApplicationProtocol>, ) -> Self
An enumerated string that specifies the application-layer protocol.
-
SECURE_MQTT
- MQTT over TLS.
-
MQTT_WSS
- MQTT over WebSocket.
-
HTTPS
- HTTP over TLS.
-
DEFAULT
- Use a combination of port and Application Layer Protocol Negotiation (ALPN) to specify application_layer protocol. For more information, see Device communication protocols.
Sourcepub fn get_application_protocol(&self) -> &Option<ApplicationProtocol>
pub fn get_application_protocol(&self) -> &Option<ApplicationProtocol>
An enumerated string that specifies the application-layer protocol.
-
SECURE_MQTT
- MQTT over TLS.
-
MQTT_WSS
- MQTT over WebSocket.
-
HTTPS
- HTTP over TLS.
-
DEFAULT
- Use a combination of port and Application Layer Protocol Negotiation (ALPN) to specify application_layer protocol. For more information, see Device communication protocols.
Sourcepub fn client_certificate_config(self, input: ClientCertificateConfig) -> Self
pub fn client_certificate_config(self, input: ClientCertificateConfig) -> Self
An object that specifies the client certificate configuration for a domain.
Sourcepub fn set_client_certificate_config(
self,
input: Option<ClientCertificateConfig>,
) -> Self
pub fn set_client_certificate_config( self, input: Option<ClientCertificateConfig>, ) -> Self
An object that specifies the client certificate configuration for a domain.
Sourcepub fn get_client_certificate_config(&self) -> &Option<ClientCertificateConfig>
pub fn get_client_certificate_config(&self) -> &Option<ClientCertificateConfig>
An object that specifies the client certificate configuration for a domain.
Trait Implementations§
Source§impl Clone for UpdateDomainConfigurationFluentBuilder
impl Clone for UpdateDomainConfigurationFluentBuilder
Source§fn clone(&self) -> UpdateDomainConfigurationFluentBuilder
fn clone(&self) -> UpdateDomainConfigurationFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moreAuto Trait Implementations§
impl Freeze for UpdateDomainConfigurationFluentBuilder
impl !RefUnwindSafe for UpdateDomainConfigurationFluentBuilder
impl Send for UpdateDomainConfigurationFluentBuilder
impl Sync for UpdateDomainConfigurationFluentBuilder
impl Unpin for UpdateDomainConfigurationFluentBuilder
impl !UnwindSafe for UpdateDomainConfigurationFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the foreground set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red()
and
green()
, which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg()
:
use yansi::{Paint, Color};
painted.fg(Color::White);
Set foreground color to white using white()
.
use yansi::Paint;
painted.white();
Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the background set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red()
and
on_green()
, which have the same functionality but
are pithier.
§Example
Set background color to red using fg()
:
use yansi::{Paint, Color};
painted.bg(Color::Red);
Set background color to red using on_red()
.
use yansi::Paint;
painted.on_red();
Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute
value
.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold()
and
underline()
, which have the same functionality
but are pithier.
§Example
Make text bold using attr()
:
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);
Make text bold using using bold()
.
use yansi::Paint;
painted.bold();
Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi
Quirk
value
.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask()
and
wrap()
, which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk()
:
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);
Enable wrapping using wrap()
.
use yansi::Paint;
painted.wrap();
Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition
value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted
only when both stdout
and stderr
are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);