| Age | Commit message (Collapse) | Author |
|---|
|
Backpatch-through: 13
|
|
This patch provides the additional logging information in the following
conflict scenarios while applying changes:
insert_exists: Inserting a row that violates a NOT DEFERRABLE unique constraint.
update_differ: Updating a row that was previously modified by another origin.
update_exists: The updated row value violates a NOT DEFERRABLE unique constraint.
update_missing: The tuple to be updated is missing.
delete_differ: Deleting a row that was previously modified by another origin.
delete_missing: The tuple to be deleted is missing.
For insert_exists and update_exists conflicts, the log can include the origin
and commit timestamp details of the conflicting key with track_commit_timestamp
enabled.
update_differ and delete_differ conflicts can only be detected when
track_commit_timestamp is enabled on the subscriber.
We do not offer additional logging for exclusion constraint violations because
these constraints can specify rules that are more complex than simple equality
checks. Resolving such conflicts won't be straightforward. This area can be
further enhanced if required.
Author: Hou Zhijie
Reviewed-by: Shveta Malik, Amit Kapila, Nisha Moond, Hayato Kuroda, Dilip Kumar
Discussion: https://postgr.es/m/OS0PR01MB5716352552DFADB8E9AD1D8994C92@OS0PR01MB5716.jpnprd01.prod.outlook.com
|
|
This commit introduces a new SQL function pg_sync_replication_slots()
which is used to synchronize the logical replication slots from the
primary server to the physical standby so that logical replication can be
resumed after a failover or planned switchover.
A new 'synced' flag is introduced in pg_replication_slots view, indicating
whether the slot has been synchronized from the primary server. On a
standby, synced slots cannot be dropped or consumed, and any attempt to
perform logical decoding on them will result in an error.
The logical replication slots on the primary can be synchronized to the
hot standby by using the 'failover' parameter of
pg-create-logical-replication-slot(), or by using the 'failover' option of
CREATE SUBSCRIPTION during slot creation, and then calling
pg_sync_replication_slots() on standby. For the synchronization to work,
it is mandatory to have a physical replication slot between the primary
and the standby aka 'primary_slot_name' should be configured on the
standby, and 'hot_standby_feedback' must be enabled on the standby. It is
also necessary to specify a valid 'dbname' in the 'primary_conninfo'.
If a logical slot is invalidated on the primary, then that slot on the
standby is also invalidated.
If a logical slot on the primary is valid but is invalidated on the
standby, then that slot is dropped but will be recreated on the standby in
the next pg_sync_replication_slots() call provided the slot still exists
on the primary server. It is okay to recreate such slots as long as these
are not consumable on standby (which is the case currently). This
situation may occur due to the following reasons:
- The 'max_slot_wal_keep_size' on the standby is insufficient to retain
WAL records from the restart_lsn of the slot.
- 'primary_slot_name' is temporarily reset to null and the physical slot
is removed.
The slot synchronization status on the standby can be monitored using the
'synced' column of pg_replication_slots view.
A functionality to automatically synchronize slots by a background worker
and allow logical walsenders to wait for the physical will be done in
subsequent commits.
Author: Hou Zhijie, Shveta Malik, Ajin Cherian based on an earlier version by Peter Eisentraut
Reviewed-by: Masahiko Sawada, Bertrand Drouvot, Peter Smith, Dilip Kumar, Nisha Moond, Kuroda Hayato, Amit Kapila
Discussion: https://postgr.es/m/[email protected]
|
|
Reported-by: Michael Paquier
Discussion: https://postgr.es/m/[email protected]
Backpatch-through: 12
|
|
Currently, for large transactions, the publisher sends the data in
multiple streams (changes divided into chunks depending upon
logical_decoding_work_mem), and then on the subscriber-side, the apply
worker writes the changes into temporary files and once it receives the
commit, it reads from those files and applies the entire transaction. To
improve the performance of such transactions, we can instead allow them to
be applied via parallel workers.
In this approach, we assign a new parallel apply worker (if available) as
soon as the xact's first stream is received and the leader apply worker
will send changes to this new worker via shared memory. The parallel apply
worker will directly apply the change instead of writing it to temporary
files. However, if the leader apply worker times out while attempting to
send a message to the parallel apply worker, it will switch to
"partial serialize" mode - in this mode, the leader serializes all
remaining changes to a file and notifies the parallel apply workers to
read and apply them at the end of the transaction. We use a non-blocking
way to send the messages from the leader apply worker to the parallel
apply to avoid deadlocks. We keep this parallel apply assigned till the
transaction commit is received and also wait for the worker to finish at
commit. This preserves commit ordering and avoid writing to and reading
from files in most cases. We still need to spill if there is no worker
available.
This patch also extends the SUBSCRIPTION 'streaming' parameter so that the
user can control whether to apply the streaming transaction in a parallel
apply worker or spill the change to disk. The user can set the streaming
parameter to 'on/off', or 'parallel'. The parameter value 'parallel' means
the streaming will be applied via a parallel apply worker, if available.
The parameter value 'on' means the streaming transaction will be spilled
to disk. The default value is 'off' (same as current behaviour).
In addition, the patch extends the logical replication STREAM_ABORT
message so that abort_lsn and abort_time can also be sent which can be
used to update the replication origin in parallel apply worker when the
streaming transaction is aborted. Because this message extension is needed
to support parallel streaming, parallel streaming is not supported for
publications on servers < PG16.
Author: Hou Zhijie, Wang wei, Amit Kapila with design inputs from Sawada Masahiko
Reviewed-by: Sawada Masahiko, Peter Smith, Dilip Kumar, Shi yu, Kuroda Hayato, Shveta Mallik
Discussion: https://postgr.es/m/CAA4eK1+wyN6zpaHUkCLorEWNx75MG0xhMwcFhvjqm2KURZEAGw@mail.gmail.com
|
|
Backpatch-through: 11
|
|
Discussion: https://postgr.es/m/[email protected]
|
|
Autoconf is showing its age, fewer and fewer contributors know how to wrangle
it. Recursive make has a lot of hard to resolve dependency issues and slow
incremental rebuilds. Our home-grown MSVC build system is hard to maintain for
developers not using Windows and runs tests serially. While these and other
issues could individually be addressed with incremental improvements, together
they seem best addressed by moving to a more modern build system.
After evaluating different build system choices, we chose to use meson, to a
good degree based on the adoption by other open source projects.
We decided that it's more realistic to commit a relatively early version of
the new build system and mature it in tree.
This commit adds an initial version of a meson based build system. It supports
building postgres on at least AIX, FreeBSD, Linux, macOS, NetBSD, OpenBSD,
Solaris and Windows (however only gcc is supported on aix, solaris). For
Windows/MSVC postgres can now be built with ninja (faster, particularly for
incremental builds) and msbuild (supporting the visual studio GUI, but
building slower).
Several aspects (e.g. Windows rc file generation, PGXS compatibility, LLVM
bitcode generation, documentation adjustments) are done in subsequent commits
requiring further review. Other aspects (e.g. not installing test-only
extensions) are not yet addressed.
When building on Windows with msbuild, builds are slower when using a visual
studio version older than 2019, because those versions do not support
MultiToolTask, required by meson for intra-target parallelism.
The plan is to remove the MSVC specific build system in src/tools/msvc soon
after reaching feature parity. However, we're not planning to remove the
autoconf/make build system in the near future. Likely we're going to keep at
least the parts required for PGXS to keep working around until all supported
versions build with meson.
Some initial help for postgres developers is at
https://wiki.postgresql.org/wiki/Meson
With contributions from Thomas Munro, John Naylor, Stone Tickle and others.
Author: Andres Freund <[email protected]>
Author: Nazir Bilal Yavuz <[email protected]>
Author: Peter Eisentraut <[email protected]>
Reviewed-By: Peter Eisentraut <[email protected]>
Discussion: https://postgr.es/m/[email protected]
|
