A32NX/A380X v0.13.0

1. [GENERAL] Fixed issue in C++ WASM Framework that caused performance degradation in some WASM modules - @frankkopp (cdr_maverick)
1. [A32NX/FCU] Fixed auto-initialisation of baro unit - @tracernz (Mike)
1. [A380X/FCU] Fix baro-preselect not recognising baro unit changes - @tracernz (Mike)
1. [A380X/FCU] QNH and altitude displays now correctly show "8" values during light test - @mattgogerly (Matt)
1. [A380X/FCU] Added metric altitude button - @tracernz (Mike)
1. [A380X/FCU] Baro knob now requires to be pushed to enter STD mode and pulled to enter BARO mode, as per the real thing - @danestfanous (Daniel Estfanous)
1. [A32NX/CAMERA] Improved default camera position for Virtual Reality (VR) - @aguther (Andreas Guther)
1. [A380X/EFB] Fixed doors automatically opening in flight - @Saschl (saschl)
1. [A380X/FMS] Fixed layouting issue on FMS/ACTIVE/PERF/T.O page for some users - @flogross89 (floridude)
1. [A380X/TELEX] Added popup for telex consent - @Saschl (saschl) @Maximilian-Reuter (\_chaoz)
1. [ND] Fix memory leak when using TERR ON ND - @Nufflee (nufflee)
1. [A380X/OVHD] Fix RCDR GND CTL button/logic - @flogross89 (floridude)
1. [A380X] Various fixes in FMS and ECL - @flogross89 (floridude)
1. [A380X/EWD] QoL: Add soft keys to EWD checklists, can be enabled via EFB - @flogross89 (floridude)
1. [A380X/LIGHTS] Implemented LOGO LT switch funcionality - @ImenesFBW (Imenes)
1. [A380X/SD] Added correct ECP ALL button SD page cycling to the A380X - @frankkopp (cdr_maverick)
1. [A380X/SURV] Fixed BTV setup from F/O side, and ROW issues at G/A with early THR RED - @flogross89 (floridude)
1. [A380X/MFD] Limit keyboard inputs to keys present in the KCCU and remap comma to decimal dot - @beheh (Benedict Etzel)
1. [GENERAL] Mitigated issue with pop-ups (i.e. pause on TOD notification) being unable to be dismissed while camera is in freelook + ALT-TAB - @2hwk (2cas)
1. [A380X/AP] Improved support of simulation rate 4x - @aguther (Andreas Guther)
1. [A380X/FLIGHTMODEL] Tweaked jetway connect position - @C-Schaffhausen (Cedric)
1. [A32NX/FANS] Restore Portuguese station codes - @tracernz (Mike)
1. [A380X/MFD] Fixed DIRECT TO selection of active waypoint does nothing - @sognodelx (Sven Gross)
1. [A380X/MODEL] Optimized 4K textures - @repsol
1. [A380X/EFB] Moved cabin lighting from ambient light knob to EFB Quick Settings - @2hwk (2cas)
1. [A380X/AFS] Fixed CP V/S knob push levelling off the aircraft when it should have no action - @tracernz (Mike)
1. [A380X/MFD] MFD/SURV: Fixed TCAS not switching status when using DEFAULT SETTINGS button - @flogross89 (floridude)
1. [A380X/FUEL] Recalibrated inital fuel settings - @sschiphorst (Yahtzee94)
1. [A380X/ENG] Another adjustment to taxi thrust - @donstim (donbikes)
1. [A380/ANIM] Animation of flaps now from FPPU position. Interim fix for spoiler low end animation - @crocket63 (crocket)
1. [A380X/ENG] Improve oil pressure lookup table - @tracernz (Mike)
1. [A380X/FADEC] Add N1 fan protection measures (METOTS, KOZ) - @flogross89 (floridude)
1. [A380/WING_FLEX] Reduced stiffness of wings for more tip up bend - @crocket63 (crocket)
1. [A380X/WING_FLEX] Reduced stiffness of wings for more tip up bend - @crocket63 (crocket)
1. [A380X/FWS] Add V1 callout - @flogross89 (floridude)
1. [FMS] Fix existing T-P moving when inserting temporary flight plan - @Benjozork (Benjamin Dupont)
1. [GPU] Improved handling of ground power for more immersive use @Maximilian-Reuter (\_chaoz_)
1. [OANS] Display correct flags when IRS position is not available - @Nufflee (nufflee)
1. [FMS] Use station declination for PBX/PBD waypoints - @BlueberryKing (BlueberryKing)
1. [RA] Add direct coupling and interrupted antenna cable failures to RAs - @beheh (Benedict Etzel)
1. [A32NX/TELEX] Keep flight number set even if already taken - @BenJuan26 (BenJuan26)
1. [HYD] Placeholder inhibit logic for electrical backup on ground - @crocket63 (crocket)
1. [A380X/PRESS] Add pressurization system failures failures ecam messages - @mjuhe (Miquel Juhe)
1. [A380X] Add rudder trim functionality to SECs, add rudder trim indication to PFD, activate indication on SD/FCTL - @flogross89 (floridude)
1. [A380X/MFD] Fix ETA and add TOD prediction in PERF page - @BravoMike99 (bruno_pt99)
1. [A380X/PFD] Add T/D Reached PFD message - @BravoMike99 (bruno_pt99)
1. [A380X/CAMERA] Showcase & pilot view camera fixes @LunakisDev (LunakisLeaks)
1. [A380X/LIGHTS] Added cockpit ambient bounce lights - @ImenesFBW (Imenes)
1. [A380X/FWS] Fix green dot speed for high weights and altitudes, fix FMS speed target for GD > climb speed limit - @flogross89 (floridude)
1. [A380X/PRIM] Fix max. spoiler deflection based on flap conf - @flogross89 (floridude)
1. [A380X/PERF] Changed managed speeds to more realistic numbers - @slightlyclueles (abnormaltoast)
1. [A380X/MFD] Add ATCCOM connect page - @heclak (heclak)
1. [A380X/PFD] Fix CP VV button turning on VV on both PFDs - @heclak (Heclak)
1. [A380X/FMS] Fixed handling of window altitude constraints, deletion of constraints, and formatting - @tracernz (Mike)
1. [A380X/SD] Fix engine fuel flow and fuel used on cruise page still use only ENG 1 + 2 LVars @heclak (heclak)
1. [A380X/ENG] Improved engine fire behaviour - overhead fire pushbuttons silence aural warning and unpowers FADEC - @mjuhe (Miquel Juhe)
1. [A380X/EFB] Fixed being able to click on window open handle through the flyPad screen - @2hwk (2cas)
1. [A32NX/FMGC] Implemented simulated FMGC computers - @lukecologne (luke)
1. [A32NX/FMGC] Implemented simulated FCU computers - @lukecologne (luke)
1. [A380X/ENGINES] Corrected ENG4 throttle variable typo - @rthom91 (Randy Thom)
1. [ND] Fixed track line not visible in GA TRK, RWY TRK and RWY modes - @ta-dzik (ta_dzik)
1. [A380X/FMS] Added SURV Status & Switching page with TCAS fault indication - @Frenkii (Moritz)
1. [FMS] Fix T/D not showing in selected speed - @BlueberryKing (BlueberryKing)
1. [FMS] Fix Pause at T/D not working in selected speed - @BlueberryKing (BlueberryKing)
1. [A380X/MFD] Various Fuel & Load Fixes - @BravoMike99 (bruno_pt99)
1. [MISC] Replaced brake temperature simulation with physics based model of brakes - @Gurgel100 (Pascal)
1. [A32NX/MCDU] Suppress TMPY FPLN when no modifications made in airways page - @robertxing2004 (robeet)
1. [A380X/FWS] No "auto brake off" callout when double pressing A/THR instinctive disconnect - @flogross89 (floridude)
1. [A380X/FWS] Improve landing capability downgrade triple click logic (#9008) - @flogross89 (floridude)
1. [A32NX/FWS] Add "auto brake off" callout, improve AP/ATHR disconnect aural alert logic - @flogross89 (floridude)
1. [A32NX/FCU] The FCU LCD is now still visible with ambient light when the backlight is off @tracernz (Mike)
1. [A380X/FMC] Fix reset of perf data on done phase or database swap - @tracernz (Mike)
1. [A32NX/ATC] Fixed ATC/TCAS power supply - @tracernz (Mike)
1. [A32NX] Fixed appearance of FCU decals on MSFS2024 - @tracernz (Mike)
1. [FMS] Fixed issue with airport loading timing out on MSFS2024 - @tracernz (Mike)
1. [A32NX] Fixed APU fire detection - @tracernz (Mike)
1. [A380X/COND] Fix wasm crash during rapid decompression - @mjuhe (Miquel Juhe)
1. [A32NX/EWD] Corrected fuel flow step to 20kg/40lbs per hour - @BravoMike99 (bruno_pt99)
1. [A380X] Fix EWD avail. thrust fill area & PFD rudder trim visibility on ground - @flogross89 (floridude)
1. [A380X/OANS] Fix "BTV/FMS RWY DISAGREE" message for single-digit runway identifiers - @flogross89 (floridude)
1. [A380X/FWS] Add automatic normal checklists reset on powerup, go around & shutdown - @BravoMike99 (bruno_pt99)
1. [A32NX/PFD] Synchronize flashing/pulsing components across PFD - @lukecologne (luke)
1. [A380X/LIGHTS] Fix function of FCU brightness knobs - @heclak (Heclak)
1. [A380X/FWS] Fix "NO ZFW OR ZFWCG DATA" ECAM alert after landing - @flogross89 (floridude)
1. [A380X/SD] Add brake temperature color change to amber when brakes are hot - @heclak (Heclak)
1. [A380X/FCU] Fix display of values on FCU during light test - @heclak (Heclak)
1. [A380X/FMS] Fix VLS computation error for CONF 1, might have lead to FMS crashes during climb out - @flogross89 (floridude)
1. [A380X/PFD] Fix PFD DU / ND DU brightness knobs - @MichelZ
1. [A380X/FCU] Add correct QFE label using the baro preselect display - @heclak (Heclak)
1. [FMS] Move the speed limit data to performance data, so that it is flight-plan-specific - @BlueberryKing (BlueberryKing)
1. [A32NX/FWC] Add FCU faults - @tracernz (Mike)
1. [ELEC] Improved elec system startup behaviour - @Gurgel100 (Pascal) - @Saschl
1. [A380X] Improve pilot and copilot camera positions - @heclak (Heclak)
1. [A380X/EFIS] Illuminate ND range and mode selectors during light test - @BravoMike99 (bruno_pt99)
1. [A380X/FCU] Automatically select LS on LOC mode arming - @BravoMike99 (bruno_pt99)
1. [A380/PFD] Add DISCONNECT AP FOR LDG FMA message - @BravoMike99 (bruno_pt99)
1. [A380X/ENG] Adjust climb thrust to be more accurate - @BlueberryKing (BlueberryKing)
1. [A380X/EWD] Show THR limit in EWD instead of N1 - @flogross89 (floridude)
1. [A380X/FLIGHT MODEL] Fix pitchup and unrecoverable stall - - @donstim (donbikes#4084)
1. [ATC/TCAS] Fixed TCAS failure on baro corrected altitude going invalid - @tracernz (Mike)
1. [ATC/TCAS] Fixed TCAS slant range computation - @tracernz (Mike)
1. [A380X] Add baro unit (hPa/in.Hg) auto selection - @tracernz (Mike)
1. [A380X/PRIM] Adapt protection speeds to new flight model - @flogross89 (floridude)
1. [A380X/EFB] Improved Aircraft Presets configuration for the A380X - @frankkopp (cdr_maverick)
1. [A32NX/AMU] Enable VHF3 audio, and allow switching off VHF1 - @tracernz (Mike)
1. [A380X/PFD] Fix font colours on metric altitude display - @MrJigs7 (MrJigs.)
1. [A380X/MFD] Fixed the altitude prediction not rounding to the nearest 10 on the FPLN page - @bulenteroglu (senolitam)
1. [A380X/MFD] Use slashed zero as default font for FMS pages - @bulenteroglu (senolitam)
1. [A380X/ND] Remove leading zeros from terrain elevation display - @BravoMike99 (bruno_pt99)
1. [A380X/MFD] Fixed the crossing climb/descent speed limit pseudo-waypoint label on the A380X - @bulenteroglu (senolitam)
1. [A32NX/FWS] Fix autopilot instinctive disconnect button logic for 3D model - @flogross89 (floridude)
1. [A380X/EFIS] Fix VV pb indicator not turning on when TRK-FPA mode is selected - @heclak (Heclak)
1. [EFB] Added troubleshooting page, under about page, for advanced support - @tracernz (Mike)
1. [FMS] Transition altitude/level and RNP now come from navdata in MSFS2024 - @tracernz (Mike)
1. [ATSU] Fixed issues with the ALL-CALLSIGNS recipient on Hoppie - @CronixZero (CronixZero)
1. [A380X/MFD] Add ATCCOM D-ATIS page layout - @heclak (Heclak)
1. [A380X/FMS] Enable FMC reset through overhead reset panel push buttons - @flogross89 (floridude)
1. [A380X/FCU] Add TRUE indication on FCU when TRUE North reference is selected on AFS CP - @heclak (Heclak)
1. [A380X/MFD] Add airport data page into the MFD (DATA > AIRPORT) - @bulenteroglu (senolitam)
1. [A380X/EFB] Adds PRIM/SEC/FCDC failures to EFB - @flogross89 (floridude)
1. [A380X/PFD] Fix precision of pitch trim indicator - @flogross89 (floridude)
1. [A380X/MFD] Add leading zero to altitude prediction and track from last waypoint on FPLN page - @bulenteroglu (senolitam)
1. [FMS] Improved nav database error handling, preserving as much valid data as possible - @tracernz (Mike)
1. [A32NX/FMS] Sort instrument procedures for display on the MCDU - @tracernz (Mike)
1. [A380X/ELEC] Various fixes in the electrical system (battery voltage indicator switchup, AC GND SVC BUS and correct behavior of battery contactors) - @Gurgel100 (Pascal)
1. [A380X/FMS] Use cruise mach above crossover altitude - @flogross89 (floridude)
1. [A380X/SD] Display oil quantity on ENG page - @flogross89 (floridude)
1. [A380X/FMS] Accept KCCU plus/minus key as first entry into field - @flogross89 (floridude)
1. [ATSU] Add MSFS as TAF source in MSFS2024 - @tracernz (Mike)
1. [A380X/MFD] Fix wrong Landing weight calculation & block fuel not editable across flights in FUEL & LOAD - @BravoMike99 (bruno_pt99)
1. [A32NX/FMS] Add terminal area database holds for MSFS2024 - @tracernz (Mike)
1. [EFB] Set EFB Auto Brightness to default to On - @MrJigs7 (MrJigs)
1. [FMS] Allow airport to be loaded as fixes in instrument procedures - @tracernz (Mike)
1. [A380X/ND] Fix Terr text wrong position on terrain radar - @MrJigs7 (MrJigs.)
1. [A380X/FMS] Vapp wind correction calculation fix - @Waveif (waveif)
1. [A380X/MFD] Fixed FLT NBR not displaying as a mandatory input field - @jet2code (john.xyz)
1. [A380X/PFD] Add FCU ALT ABOVE/BELOW A/C FMA messages - @Pruznak (Pruznak)
1. [A380X/MFD] Updated disabled input field styling - @jet2code (john)
1. [A380X/FMS] Add page scroll via soft keys & individual scroll via KCCU on MFD F-PLN - @BravoMike99 (bruno_pt99)
1. [A32NX/FMS] Added nav database swap confirmation - @tracernz (Mike)
1. [A380X/FMS] Add basic FIX INFO functionality - @Benjozork (Benjamin Dupont)
1. [A380X/FMS] Add STEP ALTs tab on VERT REV page & auto step climb functionality - @flogross89 (floridude)
1. [A380X/FMS] Add selection of CLB/DES constraint if constraint type is unknown - @flogross89 (floridude)
1. [FMS] Fix approach ident only showing on ND when approach is being flown - @BravoMike99 (bruno_pt99)
1. [A380X/FWS] Add support for deferred procedures, abnormal (non-)sensed procedures - @flogross89 (floridude)
1. [A380X/FWS] Enable FWS failures (FWS 1/2, FWS 1+2, ECP, Audio Function) - @flogross89 (floridude)
1. [A380X/PDF] Fix inverted color in the meter altitude indicator below and above the MDA - @ItzARz (Albert)
1. [A380X/BTV] Add EXIT MISSED indication on FMA and aural triple click - @flogross89 (floridude)
1. [A380X/OANS] Add flags/crosses capability, change cursor to magenta, implement ARPT NAV reset button - @flogross89 (floridude)
1. [A32NX/MCDU] Show ground & cruise temperature sign on init page if positive - @BravoMike99 (bruno_pt99)
1. [A380X/OANS] Fix BTV fallback mode; Enable BTV fallback if ARPT NAV reset button is pulled - @flogross89 (floridude)
1. [A380X/Flight Model] Flight model update incl stall & auto-rotate fix for FS2020 & 2024 - @donstim (donbikes) & @Saschl (saschl)
1. [EFB] Navigraph subscriptions other than Ultimate are now shown on the EFB to reduce confusion with "Unknown" - @tracernz (Mike)
1. [A380X/FWS] Add RAT OUT, REFUEL PNL DOOR, HI ALT AIRPORT & REFUELING/DEFUELING memos - @BravoMike99 (bruno_pt99)
1. [A380X/ND] Correct positioning of TCAS Messages and added TCAS STBY - @MrJigs7 (MrJigs)
1. [A32NX/AFS] Add new vertical profile validity LVar for managed vertical modes - @lukecologne (luke)
1. [A380X/FMS] Added (RNP) label on RNP AR SIDs and approach vias (MSFS2024 only) - @tracernz (Mike)
1. [A380X/KCCU] Fix unclickable left directional arrow key on KCCU - @heclak (Heclak)
1. [A380X/OIS] Initial implementation of OIS/OIT with charts and OFP - @flogross89 (floridude)
1. [A380X/PFD] Add LS button reminder - @BravoMike99 (bruno_pt99)
1. [A380X/FMS] Latitude/Longitude waypoints now always have the extended ident format - @tracernz (Mike)
1. [A380X/FWS] Fix rounding error in Mach-based OVERSPEED warning - @flogross89 (floridude)
1. [A380X/MFD] Add ATCCOM MSG RECORD page layouts - @heclak (heclak)
1. [A380X/ND] Fixed active leg label to be left aligned - @MrJigs7 (MrJigs)
1. [A32NX/FMS] Sort runways by identifier in the runway selection page - @BlueberryKing (BlueberryKing)
1. [A380X/MFD] Change flightplan uplink & initialize weights message logic - @BravoMike99 (bruno_pt99)
1. [A32NX/FMS] Fixed approach name format for suffixed approaches on the MCDU pages - @tracernz (Mike)
1. [A32NX/FMS] Fixed an error preventing the create waypoint page being shown when a not in database is encountered - @tracernz (Mike)
1. [A32NX/FMS] Fixed an error preventing the RETURN LSK from working on the create waypoint page in some cases - @tracernz (Mike)
1. [A32NX/FMS] Disallow editing of waypoint ident on the create waypoint page - @tracernz (Mike)
1. [A380X/MFD] Changed flightplan time header to show correct TIME or UTC - @MrJigs7 (MrJigs.)
1. [A380X] Fix FO seat switches not being momentary - @heclak (Heclak)
1. [A32NX/FMS] Added differentiation between compatible and incompatible approach vias (H4) - @tracernz (Mike)
1. [A32NX/FMS] Removed insert/erase prompts on approach via page - @tracernz (Mike)
1. [ND] Fixed alignment of approach message - @tracernz (Mike)
1. [A380X/OANS] Fix RWY AHEAD not disappearing when OANS Performance Mode is active - @flogross89 (floridude)
1. [ELEC] Add power consumption for fuel pumps - @Gurgel100 (Pascal)
1. [FMS] EFIS overlay symbols for the ND are now available in plan mode away from the aircraft position in MSFS2024 - @tracernz (Mike)
1. [FMS] Reduced in-flight stutter due to facility loading - @tracernz (Mike)
1. [A32NX/FMS] Improved approach procedure sorting - @tracernz (Mike)
1. [A380X/FMS] The (RNP) flag is now shown for approaches with only the missed approach segment as RNP AR on MSFS2024 - @tracernz (Mike)
1. [Clock] Fixed chrono not rolling over to 00:00 when reaching 99:59 - @tracernz (Mike)
1. [A380X/FWS] Fix fuel pump sensing logic for PARKING normal procedure - @flogross89 (floridude)
1. [A380X/PRIM] Automatic THS trim after engine start or touch and go - @flogross89 (floridude)
1. [A380X/PERF] Fixed issue where 0 was not an accepted cost index - @Jonny23787 (Jonathan)
1. [A380X/MFD] Update MFD font to include question mark - @heclak (Heclak)
1. [A380X/FMC] Fixed FIX INFO temporary flightplan handling - @Benjozork (Benjamin Dupont)
1. [A380X/OIS] Fix OIT brightness being incorrectly connected to RMP 2 and RMP 3 screen brightness - @heclak (Heclak)
1. [A380X/OIS] OIT brightness will now be set automatically at spawn - @heclak (Heclak)
1. [EFB/PERF] Harmonize takeoff and landing performance calculators - @FoxtrotSierra6829 (FoxtrotSierra)
1. [A32NX/FWC] Add A/THR LIMITED ECAM warning - @lukecologne (luke)

v0.13.0rc5

- Fixed issue with unhandled undefined leg.
- Fixed A/THR OFF and AP OFF event handling, logic, and added A/THR
  LIMITED.

v0.13.0-rc4

- fix: stuck popup (again) (#10012)
- fix(fms): do not remove forced turn on legs that require them (#10050)