Open Source C# Hardware Platforms for Linux

myFocuserPro2 (myFP2) is an ASCOM - INDI - LINUX - WINDOWS telescope focuser with a large range of options. 309,000+ file downloads. The most popular focuser project. (c) Copyright Robert Brown 2014-2025. All Rights Reserved. Code or portions of code may not be copied or used without written permission from the author. Other Focuser Projects myFP2ESP32 WiFi - https://sourceforge.net/projects/myfocuserpro2-esp32/ [ESP32 Only] myFP2ESP8266 WiFi - https://sourceforge.net/projects/myfp2esp8266-focus-controller/ myFP2N - Nextion touch screen display - https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/myFocuserPro2N%20NEXTION%20TFT%20DISPLAY/ myFP2M - Ready made Controllers https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/myFocuserPro2M/ Please look in the Files-Documents folder for more information. https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/Documentation/

OpenTabletDriver is an open-source, cross-platform, user mode tablet driver. The goal of OpenTabletDriver is to be cross-platform as possible with the highest compatibility in an easily configurable graphical user interface. OpenTabletDriver functions as two separate processes that interact with each other seamlessly. The active program that does all of the tablet data handling is OpenTabletDriver.Daemon. The daemon must be started in order for anything to work, however, the GUI is unnecessary. If you have existing settings, they should apply when the daemon starts. The requirements to build OpenTabletDriver are consistent across all platforms. Running OpenTabletDriver on each platform requires different dependencies. Run build.ps1 to produce binary builds to 'bin' folder. These builds will run in portable mode by default.

myFocuserPro is an ASCOM and Moonlite compatible stepper motor telescope focus controller (DIY) based on Arduino Nano/Uno. A popular DIY ASCOM focuser with more than 121,000+ downloads. (c) Copyright Robert Brown 2014-2024. All Rights reserved. Permission is granted for personal and Academic use only. Spreadsheet to calculate what stepper motor to use. https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/Documentation/Nema-Stepper-Motors.xlsx/download

A 3-channel fully automated Dew Controller (DIY project) based on Arduino Nano for telescopes. For $48 or less. (c) Copyright Robert Brown 2014-2025. All Rights Reserved. Permission is granted for personal and Academic use only. Code or portions of code may not be copied or used without appropriate credit given to author. A very popular project with over 48,000 downloads. There is a new ESP32 WiFi version at https://sourceforge.net/projects/esp32-dew-controller/ The older myDCP2 (two-channel dew controller) is found here https://sourceforge.net/projects/arduinonanodewcontrollerpro/files/myDewController%20v200%202channel/

An ESP32-Dev WiFi focuser. DIY or PCB designs. (c) Robert Brown 2014-2025, Holger M, 2019-2021. All rights reserved. Code or portions of code may not be copied or used without appropriate credit given to authors. Spreadsheet to calculate what stepper motor to use. https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/Documentation/Nema-Stepper-Motors.xlsx/download Spreadsheets to calculate CFZ https://sourceforge.net/projects/myfocuserpro2-esp32/files/CFZ%20Spreadsheets/CFZ%20Spreadsheets.zip/download Focuser Basics Guide (PDF) - shows how to derive the correct motor requirements for your system (mandatory reading) https://sourceforge.net/projects/myfocuserpro2-esp32/files/Documentation/Focuser%20Basics.pdf/download https://youtu.be/90KeSspN3e0

SIV by Ray Hinchliffe. 'System Information Viewer' is a general Windows utility for displaying lots of useful Windows, Network and hardware info - CPU info, PCI info, PCMCIA info, USB info SMBus info, SPD info, ACPI methods, Machine info, Hardware Sensors, Networked computers, Operating System Information and more. SIV is designed for Windows 11, 10, 8, 7, Vista, XP, 2012, 2008, 2003, 2000 and NT4. Windows 95, 98 and Me are also supported. SIV can also be used to control AIO devices, such as fans and LEDs. To do this, you need to specify the -AIOCTL command line qualifier. When -AIOCTL is specified, SIV will automatically do the EnhancedPowerManagementEnabled registry change and restart the USB device. SIV (System Information Viewer) uses pcidevs.txt for the PCI devices, usbdevs.txt for the USB devices, and mondevs.txt for monitoring pcmdevs.txt PCMCIA device descriptions.

Open HPI is an open source implementation of the SA Forum's Hardware Platform Interface (HPI). HPI provides an abstracted interface to managing computer hardware, typically for chassis and rack based servers. The new location for the project is https://github.com/open-hpi/openhpi

Sample code demonstrating how to use OmniDriver to drive Ocean Optics full range of spectrometers from C, C++, C#, Java, LabVIEW, Delphi, MATLAB and more.

DIY Arduino Boards PCF8674 MCP23017 74HC595 CD4021 I2C Parallel IO Piezo buzzers See the Files section for a wide range of sensors and sample code Schematics PCB Layout Sample Code

This is a C# library dedicated for using with a www.canusb.com device Full notes: See ReadMe.txt Summary The LAWICEL DLL is 'unmanaged code' and was not designed for use by C#/VB/Mono http://en.wikipedia.org/wiki/Managed_code If you wish to call 'unmanaged code' from 'managed code', you need to use a 'C# wrapper' to access the DLL. This wrapper uses 'PInvoke' (like peek/poke) to 'martial' calls from managed to unmanaged code. It sounds complicated, and it is. IT IS ALSO TOTALLY UNNECESSARY. Why not have the DLL as managed code?? Why not simply reference the library in your project and just call its functions?? This project does just that Licence: LGPLV3.: In summary, the only thing we ask is if you improve / bugfix / extend the library then feed these changes back into the project by emailing jon_newcomb or requesting sourceforge access. Applications you develop that use this library are not covered by this licence and can remain closed source and commercial

SerialPortNet is an open source serial port communication library for Microsoft .NET. It's written in c#, implements complete .NET 2.0 specifications, and is designed to allow for multiple OSes and add-on 3rd party Serial to Network adapters.

VTD-XML is the next generation XML parser/indexer/editor/slicer/assembler/xpath-engine that goes beyond DOM, SAX and PULL in performance, memory usage, and ease of use.

GUI wrapper for escputil (command line utility to manage Epson printers): it allows to watch ink levels, clean print heads, print nozzle patterns, align printer heads, .... with a simple and friendly user interface.

CD tools to read write CDs / DVDs / Images, mostly front ends for cdrtools, written in VB.NET for win32.

This project intends to build a complete CallerID-function for home- or small buisniess environments. It depends on simple hardware which everyone can build. It will present the incomming call's number on every workstation on the network.

SirVer is an C# Web Server with a script language supported by the Framework .Net and Mono

Sysinfo is a simple GNU/Linux program which displays some computer/system information.

Driver support for 3D Controller Hardware. We hope to support SDL Input, DirectInput, and other major controller API's including game consoles and embedded systems.

Toolkit (.NET/Mono) + GUI (GTK#) to administer and control a Conexant Encore ADSL Modem. Its modular design allows to be extended to support other brands/models.

Using the new C# Dll from swig portability of Openobex/ObexFtp to write a nice GUI able to transfer file between two devices with obex protocol. More Info’s here: http://cs-obexftp.wiki.sourceforge.net/

The goal of this project is to build a centralized domotic system. This project contents three parts: - An electronic part; - An embedded software part (PIC Microship controller); - A PC software part (Dotnet/Mono)

FoxController is a cross-platform application wich allows to control etherogeneous devices through a general pupose web service interface. FoxController uses a plug-in architecture in order to implement the low level communication with the devices

A cross platform, cross architecture .net library designed to make human interface device (HID) software development as easy and portable as possible.

An easy way to perform background processing in .NET and .NET Core applications. No Windows Service or separate process required. Backed by persistent storage. Open and free for commercial use. Easy to set up, easy to use. No Windows Service, no Windows Scheduler, no separate applications required. Background jobs are regular static or instance .NET methods with regular arguments, no base class or interface implementation required. Once a background job was created without any exception, Hangfire takes the responsibility to process it with the at least once semantics. Although the default installation uses SQL Server and polling technique to fetch jobs, you can leverage MSMQ or Redis extensions to reduce the processing latency to minimum. Background method calls and their arguments are serialized and may overcome the process boundaries. Job filters allow you to add custom features to the background processing in a way similar to ASP.NET MVC action filters.

Free general purpose loader tool for ATMEL's AVR controllers using arduino board or FTDI's FT232. PCB Files also available.