Open Source Python Raspberry Pi Software

imgFlasher has been built specifically for Embedded and IoT developers in order to flash OS images on SD cards and USB drives. Made primarily for Raspbian, Ubuntu, Debian, Yocto-based images but works with any kind of Linux distribution. imgFlasher is a portable software that doesn't require any installation. The process of flashing OS with imgFlasher is super simple and requires just 3 steps. (1) Choose img/zip file. (2) Choose drive to flash on. (3) Click on Flash. Recommended using for Raspberry Pi, Banana Pi, Odroid, BeagleBone, Nvidia Jetson, Tinkerboard, etc.

Next-generation AWS IoT Client SDK for Python using the AWS Common Runtime. This document provides information about the AWS IoT Device SDK v2 for Python. This SDK is built on the AWS Common Runtime, a collection of libraries (aws-c-common, aws-c-io, aws-c-mqtt, aws-c-compression, aws-c-http, aws-c-cal, aws-c-auth, s2n ...) written in C to be cross-platform, high-performance, secure, and reliable. The libraries are bound to Python by the awscrt package (PyPI). AWS IoT provides the cloud services that connect your IoT devices to other devices and AWS cloud services. AWS IoT provides device software that can help you integrate your IoT devices into AWS IoT-based solutions. If your devices can connect to AWS IoT, AWS IoT can connect them to the cloud services that AWS provides. AWS IoT lets you select the most appropriate and up-to-date technologies for your solution.

Basalsure is a hardware design and software kit to build a basal insulin dose assurance box for users of multiple daily injections (MDI) via syringes.

GROWbox Supervisor System (GROWSS) is a grow box or grow cabinet environmental controller. GROWSS uses a Raspberry Pi (RPI) & Grove sensors to monitor and control the environment in your grow box or cabinet. Environmental factors such as temperature, humidity, soil moisture, & smoke (from fire) are monitored and displayed on a terminal connected to the RPI & on a mobile app. GROWSS also controls the exhaust fan and grow lights based on the time interval (ie. 12 hours on/12 hours off) & from environmental factors, temp & humidity. The environmental values are saved to the local storage every 15 minutes and when an alarm is present. Hi & low values are also saved. The LEDs on the case & the mobile application indicate if there is a high/low temp alarm, hi/low humidity alarm, soil moisture alarm, or smoke alarm. A speaker (buzzer) is activated on the case if there is a smoke alarm. 2 other LEDs indicate if either the exhaust fan is on or if the humidifier is on.

This software is for delivering push notifications to remote devices such as smartphones and tablets from a Raspberry Pi when the Raspberry Pi is connected through its GPIO pins to a device which holds a relay or electronic switch temporarily closed when activated. An example of such as device is a Dakota Alert break beam sensor.

iHome is a fully tested Smart Home Automation system using the Raspberry Pi Zero WiFi SBC and Linux OS and has all the functional features of NEST or ECOBEE smart thermostats with the added benefit of full privacy and security at less than half the price! It incorporates MBLogic with algorithms and Modbus coms for HVAC home control via the ionware modbus compatible ionC1 input/output controller board. The iHome software system comes fully configured as a SD Card image file for Raspberry Pi Zero wifi Plug and Play capability complete with MBLogic, Node-RED and MQTT already fully installed and ready to go. See wiki instructions to burn the SD Card image file, insert into your RPi Zero and Plug and Play. The iHome is an Internet of Things (IOT) demo project for the ionware ionC1 hardware and the software system and is a complete SCADA platform c/w Modbus TCP Servers and Modbus RS485 serial clients for scalable building automation projects. See - ionware.io/free-offer/