Open Source C Robotics Software for Mac

This repo adds the support of STM32 MCU in Arduino IDE. This porting is based on STM32Cube MCU Packages including the HAL hardware abstraction layer, enabling portability between different STM32 devices via standardized API calls. The Low-Layer (LL) APIs, a lightweight, optimized, expert-oriented set of APIs designed for both performance and runtime efficiency. CMSIS device definition for STM32. Arduino.cc IDE allows to add easily new board thanks the "Boards Managers". More information about "Boards Managers" is available on Arduino.cc official website.

ElectronBot is a desktop-scale robot platform designed for enthusiasts and makers, combining robotics, embedded systems, display, and gesture sensing into a compact mechanical “tool bot”. The project features six degrees of freedom (rotational axes) for arms, neck, and body, allowing expressive motion beyond simple head-tilt or arm-wave. It includes USB communication and a built-in display, enabling it to respond to host computer inputs and act as an interactive peripheral rather than just a static automaton. The creator provides full source materials—mechanical (3D printed or CNC parts), electronics (PCBs, custom boards), firmware and drivers—so someone can build or modify the robot themselves. The platform also integrates computer vision or gesture sensing (for example, keypoint detection of human pose) so the bot can respond dynamically to a person’s presence or movement.

An Arduino IDE compatible graphics and fonts library for 32-bit processors. The library is targeted at 32-bit processors, it has been performance-optimized for STM32, ESP8266 and ESP32 types. The library can be loaded using the Arduino IDE's Library Manager. Direct Memory Access (DMA) can be used with the ESP32, RP2040, and STM32 processors to improve rendering performance. "Four wire" SPI and 8 bit parallel interfaces are supported. Due to the lack of GPIO pins, the 8-bit parallel interface is NOT supported on the ESP8266. 8 bit parallel interface TFTs (e.g. UNO format mcufriend shields) can use with the STM32 Nucleo 64/144 range or the UNO format ESP32. ILI9341 and ST7796 SPI-based displays are recommended as starting points for experimenting with this library. The library supports some TFT displays designed for the Raspberry Pi (RPi) that are based on a ILI9486 or ST7796 driver chip with a 480 x 320-pixel screen.

Dummy-Robot is an open source robotics project by Peng Zhihui that showcases the design and implementation of a compact robotic arm . The repository contains full hardware design files, firmware, control software, and 3D models. It includes components such as a gripper, LED light ring PCB, wireless spatial positioning controller, and a portable case. The project demonstrates advanced engineering with stepper motor drivers, custom controllers, and debugging tools. While the original version is CNC-machined, a simplified 3D-printable "youth edition" is planned to lower costs. This project serves as both an educational resource and a demonstration of innovative DIY robotics.

Arduino library for parsing and decoding MOD, WAV, MP3, FLAC, MIDI, AAC, and RTTL files and playing them on an I2S DAC or even using a software-simulated delta-sigma DAC with dynamic 32x-128x oversampling. ESP8266 is fully supported and most mature, but ESP32 is also mostly there with built-in DAC as well as external ones. For real-time, autonomous speech synthesis, check out ESP8266SAM, a library that uses this one and a port of an ancient format-based synthesis program to allow your ESP8266 to talk with low memory and no network required. All this code is released under the GPL, and all of it is to be used at your own risk. If you find any bugs, please let me know via the GitHub issue tracker or drop me an email. The MOD and MP3 routines were taken from StellaPlayer and libMAD respectively. The software I2S delta-sigma 32x oversampling DAC was my own creation and sounds quite good if I do say so myself.

This is a sophisticated & integrated simulation and analysis environment for dynamical systems models of physical systems (ODEs, DAEs, maps, and hybrid systems). It supports symbolic math, optimization, continuation, data analysis, biological apps...

FREESECS is an open-source project for SEMI SECS standards. The software is compiled with GNU autotools/GCC and runs on Linux, MacOS X, NetBSD. See http://opensecs.sourceforge.net

This repository is now frozen. The latest version of the RepRap project can be found at https://github.com/reprap.

openPOWERLINK is an Open Source Industrial Ethernet stack for communication in hard real-time. It can be operated as both, Managing Node (master) and Controlled Node (slave). With version 2.0, the source code has been cleanly split into an application-oriented user library and a time-critical stack driver. The latter may be moved to a dedicated communication processor or into a kernel module to deliver enhanced performance while still keeping the API in user space. A full documentation of the stack is available on the web site: http://openpowerlink.sourceforge.net The following page can be used to report a security vulnerability: https://sourceforge.net/p/openpowerlink/discussion/

PMC is an open project that aims to build the quality permanent magnet synchronous machine (PMSM) controller for use in a variety of scopes like RC or electric transport.

NXShield API's and Documentation Online API reference available at: http://www.openelectrons.com/NXShield/html/

XMOS based, USB2 audio card, low power consumption, small form factor, 8 synchronous input channels and 4 stereo output channels.

A parametric, feature-based, sketch-driven 3D CAD application, built around a geometrical constraint solving engine. Project is in early development stage. The FreeSG library (http://freesg.org/) is required.

This project implements an On Screen Display for FPV (First Person View) for RC planes. Sends telemetry data from GPS & sensors embebed with video information.

Driver support for 3D Controller Hardware. We hope to support SDL Input, DirectInput, and other major controller API's including game consoles and embedded systems.

C and C++ library for the NIBObee, NIBO burger and NIBO 2 robots. The library contains libraries for AVR Studio and Arduino developement, USB drivers and the RoboDude programming software.

PROJECT HAS MOVED! ROS is now hosted at https://code.ros.org/gf/project/ros/

This project introduces sample programs of the URG library. Applications using URG and URG library are also introduced here. URG is Scanning Laser Range Finder of Hokuyo Automatic Co., for robots, autonomous systems and security systems.

Open source, cross platform drivers and function library for the NovInt Falcon Haptic Controller. These drivers are not produced by Novint Technologies, Inc. and do not come with any warranty as to their correctness or usage.

iCub is an open platform for scientists interested in investigating issues in embodied cognition. Here you find all the software and hardware documentation.

HaikuVM has been started for hobbyists who develop applications for ARDUINO to open the world of JAVA and leJOS. Yes, you can program an ARDUINO with JAVA! HaikuVM is so small that it even runs on an atmega8 (and the ASURO robot). And yes, you can program an ASURO robot with JAVA! And since version 1.4.0 the RCX lego brick.

Programs for MFS Foxes FTC Team 110 for the 2010-11 season.

This Arduino library is a native Apple HomeKit accessory implementation for the ESP8266 Arduino core and works without any additional bridges. This project is mainly based on an esp-home kit for ESP-OPEN-RTOS. I ported the RTOS-based implementation of the esp-home kit to the pure Arduino environment, aimed at easy and fast building projects using Arduino IDE (or Eclipse with sloeber, PlatformIO). Enjoy the "one-key" build, "one-key" upload, and work to link various other Arduino libraries with Apple HomeKit! This library is built with ESP8266 Arduino Core 2.6.3. Lower versions may compile with errors. For ESP32, see Arduino-HomeKit-ESP32. The HomeKit running on ESP32 has a GREAT PERFORMANCE which is 10x faster than ESP8266. You should set the ESP8266 CPU to run at 160MHz (at least during the pairing process), to avoid the tcp-socket disconnection from the iOS device caused by a timeout.

Arduino2Lego is a project developed at the Politecnico of Milan by a Computer Science Engineering student. It aims to make all Lego NXT peripherals (motors, sensors,...) easily usable from Arduino.

Here you can find the following Tools and libs for the famous ASURO robot. ASUROLIB: C library for the ASURO. ASURINO+ASUROBOOT: An Arduino library and Arduino/STK500v1 compatible Bootloader for the ASURO.